H1_Drawing_files_185600_ELEC.PDF

PDF 6 MB Posted May 24, 2018

Attached to: Replace fire alarm system and Building Transceiver (BT) for buildings on west side of Camp Casey.
Solicitation number: W91QVN-18-R-0137
Issued by: Department of the Army Materiel Command Army Contracting Command

About this file

From the source

ELEC

View the file

Other files

File	Type	Posted
H1_Drawing_files___185600___CIVIL.PDF	PDF	May 24, 2018
H1_Drawing_files___185600___STRU.PDF	PDF	May 24, 2018
H1_Submittal_Register___185600.xls	XLS spreadsheet	May 24, 2018
RFP_for_W91QVN18R0137.docx	DOCX document	May 24, 2018
H1_Drawing_files___185600___ARHC.PDF	PDF	May 24, 2018
H1_Drawing_files___185600___Title.pdf	PDF	May 24, 2018
H1_Drawing_files___185600___MECH.PDF	PDF	May 24, 2018

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

GENERAL NOTES

2.MOUNTING HEIGHTS ABOVE FLOOR SHALL BE AS FOLLOW UNLESS OTHERWISE

NOTED ON THE DRAWING.

LIGHTING FIXTURE SEE LIGHTING FIXTURE SCHEDULE

PANELBOARD SEE SPECIFICATION

SAFETY SWITCH 1524mm TO CENTER OF THE ENCL

1105mm TO CENTER OF THE ENCL

MOTOR CONTROLLER 1524mm TO CENTER OF THE ENCL

6.THE SOIL RESISTANCE TO GROUND FOR THE ELECTRICAL AND COMMMUNICATION

SYSTEMS SHALL BE 25 OHMS OR LESS. THE SOIL RESISTANCE TEST SHALL BE

CONDUCTED BY THE CONTRACTOR TO OBTAIN THE REQUIRED SOIL RESISTANCE.

INDICATEDS 2 #12AWG IN 16C

INDICATEDS 3 #12AWG IN 16C

INDICATEDS 4 #12AWG IN 16C

A GREATER NUMBER OF WIRES ARE INDICATED AS FOLLOWS;

1219mm TO CENTER OF THE ENCLWALL SWTICH

CONDUIT UNLESS OTHERWISE INDICATED.

ALL EQUIPMENT CONTROL WIRING SHALL BE #14 AWG. "TW" IN 16C

AND LOCATION OF THE F/A ANTENNA WITH THE CENTRAL FIRE DEPARTMENT

THE CONTRACTOR SHALL SUBMIT THE SHOP DRAWING FOR THE MOUNTING

TO TRANSMIT THE ALARM RADIO SIGNAL WAVE WITHOUT ANY OBSTRUCTION.

DETAIL OF THE F/A ANTENNA, AND COORDINATE THE MOUNTING HEIGHT

F/A EQUIPMENT IN THE CENTRAL FIRE DEPARTMENT.

THE EQUIPMENT SHOULD BE COMPATIBLE WITH THE MAIN EXISTING

B C D

E F G H

SYMBOL BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

ELECTRICAL

SCOPE OF WORKS

LEGEND, GENERAL NOTES AND

E-1

12.

13.

14.

10.

11.

15.

SINGLE POLE TOGGLE SWITCH, 15A-125V

L E G E N D

FLEXIBLE CONDUIT W/CONNECTORS

LIGHTING

WIRING

POWER

INTERIOR

SYMBOL DESCRIPTION

DESCRIPTION

THERMOSTAT (UNDER MECH. ITEM)

JUNCTION BOX

SYMBOL

F FAN MOTOR (UNDER MECH. ITEM)

SAFETY SWITCH

C CONTROL CIRCUIT

3-WAY SWITCH, 15A-125V

AND GOVERNMENT INSTALLED

GOVERNMENT FURNISHED

GFGI

WEATHERPROOFWP

LA LIGHTNING ARRESTER

EXPLOSIONPROOFEP

DISTRIBUTIONDIST

GROUND FAULT PROTECTIONGFP

A AMPERE

AC ALTERNATING CURRENT

AF/AT AMPERE FRAME/AMPERE TRIP

AWG AMERICAN WIRE GAUGE

BC BARE COPPER

BLDG BUILDING

BRKR BREAKER

C CONDUIT

CB CIRCUIT BREAKER

CKT CIRCUIT

CONN CONNECTION

CT CURRENT TRANSFORMER

DET(S) DETAIL(S)

DIAG DIAGRAM

DISC DISCONNECT

DWG(S) DRAWING(S)

EA EACH

EM EMERGENCY

ENCL ENCLOSURE

EXST EXISTING

F/A FIRE ALARM

FL FLOOR

FLUOR FLUORESCENT

FXTR FIXTURE

GEN GENERATOR

GND GROUND

HP HORSE POWER

HZ HERTZ

INCAND INCANDESCENT

INSTL INSTALLATION

J-BOX JUNCTION BOX

K KILO

KV KILO VOLT

KVA KILO VOLT AMPERE

LTG LIGHTING

MAG MAGNETIC

MAX MAXIMUM

MIN MINIMUM OR MINUTE

MTG MOUNTING

NO NUMBER

O/H OVER HEAD

PH PHASE

PNLBD PANELBOARD

PRIM PRIMARY

PWR POWER

Q'TY QUANTITY

RCPT RECEPTACLE

REQ'D REQUIRED

SCHED SCHEDULE

SEC SECONDARY

SPEC SPECIFICATION

STD STANDARD

SW SWITCH

TEL TELEPHONE

TYP TYPICAL

U/G UNDERGROUND

V VOLT

VA VOLT AMPERE

W WATT

W/ WITH

XFMR TRANSFORMER

& AND

CABNET TYPE, RATED WATT ON LTG SCHEDULE

LED LIGHTING FIXTURE, WALL MOUNTED OR UNDER

ON LTG SCHEDULE, WET LOCATION

LED LIGHTING FIXTURE, RATED WATT & TYPE OF MTG

FAULT PROTECTED TYPE

DUPLEX RECEPTACLE, 2P-3W-20A-125V, GROUNDED

PANELBOARD

HOMERUN CIRCUIT TO PANELBOARD

TYPE OF MTG ON LTG SCHEDULE

EXTERIOR LED LIGHTING FIXTURE, RATED WATT &

TYPE

DUPLEX RECEPTACLE, 2P-3W-20A-125V, GROUNDING

ABBREVIATION

THE COTNRACTOR SHALL SUBMIT A SHOP DRAWING OF HVAC SYSTEM

IN ACCORDANCE WITH SEQUENCE OF OPERATION INDICATED ON THE

MECHANICAL DRAWINGS.

ANY CIRCUIT WITHOUT FURTHER DESIGNATION INDICATES 2-#12AWG

WIRES IN 16C CONDUIT UNLESS OTHERWISE INDICATED.

THE GROUNDING CONDUCTORS SHALL BE SEPARATELY PROVIDED FOR

ELECTRICAL EQUIPMENT UNLESS OTHERWISE INDICATED ON THE DRAWING.

CATV BEFORE CONSTRUCTION.

CONTRACTOR SHALL COORDINATE WITH AREA MP, DO IMO, SIGNAL BRIGADE,

AND GOVERNMENT ACCEPTANCE.

PANELBOARD DOOR, REQUIRED BEFORE FINAL BUILDING INSPECTION

CONTRACTOR SHALL MAKE CIRCUIT CHARTS AND ATTACH THEM TO

FIRE CODE AND SPECIFICATIONS.

OF THE NATIONAL ELECTRICAL CODE, NATIONAL ELECTRICAL SAFETY CODE,

ALL ELECTRICAL WORK SHALL CONFORM TO THE CURRENT REQUIREMENTS

OR RENOVATION.

CONDITION AND DIMENSIONS PRIOR TO COMMENCING ANY CONSTRUCTION

THE CONTRACTOR SHALL BE RESPONSIBLE IN VERIFING ALL EXISTING

FIXTURE A MINIMUM DISTANCE OF 458mm.

FIRE ALARM DETECTORS SHALL BE LOCATED TO CLEAR ANY LIGHTING

FACP

FTR

AUXILIARY

DESCRIPTIONSYMBOL

STROBES

WALL MOUNTED SPEAKER /COMBO. (FA+MNS)VISUAL

BUILDING TRANSMITTER UNIT FOR FIRE ALARM

SYSTEM

PHOTOCELL

FAULT PROTECTED TYPE, WEATHER PROOF

DUPLEX RECEPTACLE, 2P-3W-20A-125V, GROUNDED

TYPE

SINGLE RECEPTACLE, 2P-3W-20A-125V, GROUNDING

TYPE WITH PLUG

SINGLE RECEPTACLE, 3P-4W-30A-125/250V, GROUNDING

TYPE WITH PLUG

SINGLE RECEPTACLE, 3P-4W-50A-125/250V, GROUNDING

ON LTG SCHEDULE

LED LIGHTING FIXTURE, RATED WATT & TYPE OF MTG

ON LTG SCHEDULE

LED LIGHTING FIXTURE, RATED WATT & TYPE OF MTG

W/EMERGENCY BATTERY UNIT

W/EMERGENCY UNIT TYPE

QUADPLEX RECEPTACLE, 2P-3W-20A-125V, GROUNDING

ON LTG SCHEDULE

LED LIGHTING FIXTURE, RATED WATT & TYPE OF MTG

ON LTG SCHEDULE

LED LIGHTING FIXTURE, RATED WATT & TYPE OF MTG

UNITS.

CERTIFICATE FROM MANUFACTURER FOR LED LIGHTING FIXTURES AND POWER

CONTRACTOR SHALL BE RESPONSIBLE TO PROVIDE 10YEARS WARRANTY

16.

THE GRADING LINE OF NEW DUCTS WILL BE LIMITED TO THE

WIDTH OF DUCT EXCAVATION.

AND AFTER INSTALLATION OF ELECTRICAL SYSTEM.

TO THEIR ORIGINAL CONDITION AND OPERATION DURING

ALL DAMAGED AREA INCLUDING SODDING, UTILITIES, STRUCTURES

THE CONTRACTOR SHALL BE RESPONSIBLE FOR RESTORING

LIGHTING CONTACTOR, SEL SW (H-O-A)

THE MANUFACTURER AND MODEL OF NEW BUILDING TRANSMITTER EQUIPMENT

IN THE CENTRAL FIRE DEPARTMENT.

THE EQUIPMENT SHOULD BE TESTED WITH THE RECEIVING SYSTEM(D21)

SHALL BE COORDINATED WITH THE CENTRAL FIRE DEPARTMENT.

RECEPTACLE

TYPE

DUPLEX RECEPTACLE, 2P-3W-20A-220V, GROUNDING

FIRE ALARM CONTROL PANEL

AND WALL

WIRING CONCEALED OR EXPOSED IN/ON THE CEILING

CEILING OR CONCEALED IN NEW WALL.

ALL WIRING SHALL BE CONCEALED ABOVE CEILING WHEN THE ROOM HAS

SCOPE OF WORK

A. REPAIR/MAINTENANCE ( K )

642, 654, 655)

AND CONDUIT FOR 11 BUILDINGS (BUILDING NO. 1, 17, 47, 48, 50, 62, 68, 72,

BUILDING TRANSMITTERS SETS(11 SETS) AND ASSOCIATED WIRING

REPAIR EXIST FIRE ALARM CONTROL SYSTEM WITH NEW FIRE ALARM

185600

TAK, YS

10.

CONDUITS WITH NEW FOR BUILDING NO 81.

EXTERIOR LIGHTS, TOGGLE SWITCHES, 3-WAY SWITCHES, WIRES AND

REPLACE DETERIORATED EXISTING LIGHTING FIXTURES, EXIT LIGHTS,

ASSOCIATED WIRING & CONDUITS WITH NEW FOR BUILDING NO 81.

ENCLOSED CIRCUIT BREAKER, RECEPTACLES W/COVER PLATES

REPLACE EXISTING PANEL BOARDS, WATTHOUR METER W/CT'S,

NEW FOR BUILDING NO 81.

POWER WIRES AND CONDUITS FOR MECHANICAL HVAC SYSTEM WITH

STARTERS, MANUAL MOTOR STARTER, JUNCTION BOXES, CONTROL/

REPLACE DETERIORATED EXISTING SAFETY SWTICH, MAGNETIC MOTOR

AND ASSOCIATED WIRING AND CONDUIT FOR BUILDING NO 81.

75 CANDELA), MICROPHONE, SPEAKER (WATTAGE AS REQ'D) DEVICE

BUILDING TRANSMITTER, ANTENNA, VISUAL/SIGNAL STROBES (15 OR

PANEL, MANUAL PULL STATION, SMOKE DETECTOR & RELAY MODULE,

ADDRESSABLE FIRE ALARM CONTROL AND MASS NOTIFICATION SYSTEM

REPLACE DETERIORATED FIRE ALARM CONTROL SYSTEM WITH NEW

& CONDUIT WITH NEW FOR BUILDING NO 81.

PLATES, TERMINAL BLOCKS, ACCESSOREIS AND ASSOCIATED WIRE

TELEPHONE TERMINAL BOARD, TELEPHONE OUTLETS W/COVER

REPLACE DETERIORATED EXISTING TELEPHONE SYSTEM INCLUDING

FOR BUILDING NO 81.

CATV OUTLETS W/ COVER PLATE & CABLE AND CONDUIT WITH NEW

REPLACE EXISTING CATV CABINETS AND ACCESSORIES, PULL BOXES,

NO 81.

CAP AND SECONDARY RACKS AND ACCESSORIES WITH NEW FOR BUILDING

REPLACE EXISTING EXTERIOR OVER HEAD SECONDARY LINE, ENTRANCE

ACCESSORIES WITH NEW FOR BUILDING NO 81.

REPLACE EXISTING EXTERIOR UNDERGROUND TELEPHONE LINE AND

SYSTEM WITH ASSOCIATED WIRING AND CONDUIT FOR BUILDING NO 81.

REMOVE AND REINSTALL EXISTING CCTV CEMARAS AND MONITORING

BUILDING S-81, CP CASEY

BUILDING TRANSMITTERS AND REPAIR

REPLACE FIRE ALARM SYSTEM / INSTALL

B C D

E F G H

SYMBOL BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

NEW GROUND FL LIGHTING PLAN

SCALE : 1/100

REMARKSMOUNTING METHODQ'TY

SHT

WATTSTYPE

LAMP

NAME

ROOM

TYPE

LIGHT FIXTURE SCHEDULE

OCE STD DET 40-06-04

LED101~107 BED ROOM

BATH ROOM

NS-6a

NS-6b

CEILING RECESSED

CEILING RECESSED W/"EM" UNIT

NS-7

NS-8

CEILING RECESSED

WALL MOUNTED ABOVE THE MIRROR TOP

112 LAUNDRY NS-4a

NS-4b

111 MECH ROOM NS-9a

NS-9b

- EXIT

EXTERIOR

ABOVE THE DOOR TOPNS-3 2- WALL MOUNTED4.99

NS-10 3-

110 VEST

113 COMM CLOSET

PENDNAT MOUNTED +2700mm AFF

+2700mm AFF, W/ "EM" UNITPENDNAT MOUNTED

NS-9b - 1 +2700mm AFF, W/ "EM" UNITPENDNAT MOUNTED

CEILING RECESSED

CEILING RECESSED W/"EM" UNIT

ABOVE THE DOOR TOPWALL MOUNTED

LED

108 VEST

109 CORRIDOR

NS-5b 25 1 CEILING RECESSED

NS-5a

NS-5b

CEILING RECESSED

CEILING RECESSED W/"EM" UNIT

W/"EM" UNIT-

NS-5b 25 1 CEILING RECESSED W/"EM" UNIT-

LED

S S

SSS SS

S S

"MP"

S3S

BED ROOM

VEST

BED ROOM

VIP BEDROOM

VEST

LAUNDRY

S S

CORRIDOR

3S S

S S

S3S

S S

3SS

S S

S3S

P2-1

P2-3

P2-5

COMM

ROOM

MECH

NIGHT LIGHT

(TYPICAL)

CONN TO NEW EXH FAN

SEE PLAN EP101

(TYPICAL)

"P1""P2"

L L L L L LLLLLLL

L L L L

LLL

L L L L

LLL

L L

L L L L

LLL

E-2

ELECTRICAL

LIGHTING FIXTURE SCHEDULE

NEW GROUND FL LIGHTING PLAN &

LED 45

LED

CLOSET/CCTV

TAK, YS

185600

BUILDING S-81, CP CASEY

B C D

E F G H

SYMBOL BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

ELECTRICAL

DIODE(LED) EXIT LIGHT FIXTURE 1PH, 120V, 4.99W

WALL SURFACE MOUNTED LIGHT EMITTING

(MAX. INPUT), BATTERY BACK-UP WITH BATTERY CHARGER

NS-3

NS-7

NS-4a & 4b

NS-9a & 9b

NS-8

NS-10

245mm

254mm

CEILING RECESSED MOUNTED LIGHT EMITTING DIODE (LED)

NS-6a & 6bNS-5a & 5b

WALL

NON-STANDARD LIGHT FIXTURE DETAILS

ELECTRICAL

E-3

FIXTURE, 1PH, 120V, 25W, UL LISTED WITH CONVERTER &

ACCESSORIES (NS-5a) & WITH EM UNIT (NS-5b) AS REQUIRED

CEILING SURFACE/PENDANT MOUNTED LIGHT EMITTING DIODE (LED)

FIXTURE, 1PH, 120V, 45W, UL LISTED, WITH CONVERTER AND

ACCESSORIES AS REQUIRED, (NS-9a) & EM UNIT(NS-9b)

CEILING RECESSED MOUNTED LIGHT EMITTING DIODE (LED)

FIXTURE, 1PH, 120V, 45W, UL LISTED, WITH CONVERTER &

ACCESSORIES AS REQUIRED, (NS-4a) & WITH EM UNIT (NS-4b)

FIXTURE, 1PH, 120V, 18W, WITH CONVERTER & ACCESSORIES,

CEILING SURFACE MOUNTED LIGHT EMITTING DIODE (LED)

WET LOCATION SHOWER LIGHT TRIM, UL LISTED POWER UNIT

FIXTURE, 1PH, 120V, 18W, WITH CONVERTER & ACCESSORIES

WALL SURFACE MOUNTED LIGHT EMITTING DIODE (LED)

AS REQUIRED, UL LISTED POWER UNIT

WALL MOUNTED LED LIGHT FIXTURE, 1PH, 120V, 22W LED

LAMP, CONVERTER & ACCESSORIES AS REQUIRED,

WET LOCATION TYPE, UL LISTED POWER UNIT

CEILING RECESSED MOUNTED LIGHT EMITTING DIODE (LED)

FIXTURE, 1PH, 120V, 50W, UL LISTED, WITH CONVERTER &

ACCESSORIES, (NS-6a) & WITH EM UNIT (NS-6b) AS REQUIRED

TAK, YS

185600

BUILDING S-81, CP CASEY

P1-23

"EM"

2#10 & 1#10(G) IN 21C

"P1""P2"

CTC

P1-25

P1-19 P1-24

P1-22

P1-1 P1-21P1-2

P1-14 P1-13 P1-4

P1-11

P1-10

P1-3

P1-15

P1-17

P1-6

P1-5

P1-9 P1-16

P1-18

P1-8

P1-12

P1-7

R P2-2 P2-6

P2-20

P2-24 P2-16

P2-4R

P2-17 P2-7

P2-25 P2-21

P2-9

P2-11

P2-10

P2-15 P2-14

P2-23

RP2-27

P2-19

P2-13

P2-12

P2-22

P2-30

HDRA HD

P2-8 P2-18

"MP"

W H

MP-7

MP-8

MP-9

MP-11

BED ROOM

VEST

BED ROOM

VIP BEDROOM

VEST

LAUNDRY

CORRIDOR

109113

COMM

ROOM

MECH

P1-27

P1-29

P1-31

P2-29

P2-30

P2-32 P2-26

M MM

RA HD

MP-3

CONN TO NEW LIGHT

(TYPICAL)

DWH

P-1

EF-2

JP-2

EF-1

ACU1

(IN)

A C

(OUT)

3#10 & 1#10(G) IN 21C

"P1""P2"

"MP"

FCU-1 FCU-1

FCU-1

FCU-1 FCU-1

JEF-1 J EF-1 JEF-1

J EF-1 JEF-1J EF-1

F C

MP-15

MP-4

MP-14

P1-20

P2-28

P1-26

MP-12

MP-10

MP-13

BED ROOM

VEST

BED ROOM

VIP BEDROOM

VEST

LAUNDRY

CORRIDOR

109113

COMM

ROOM

MECH

FCU-2

NEW GROUND FL GENERAL POWER PLAN

SCALE : 1/100

NOTES

1. FOR ABBREVIATION, LEGEND AND GENERAL NOTES

* ADDITIONAL LEGEND(THIS SHEET ONLY)

SINGLE RECEPTACLE (3P-4W-50A-125/250V,

GROUNDING TYPE) W/PLUG FOR RANGE

1PH-120/208V-6470W

(LOCATED INSIDE HOOD CABINET)

AND LIGHT(1PH-120V-18W)

FOR RANGE HOOD FAN(1PH-115V-2.0A)

SINGLE RECEPTACLE (2P-3W-20A-125V

GROUNDING TYPE) W/CORD-SET

(MH : +140mm TO TOP OF RCPT)

(MH: +900mm TO CENTER OF RCPT)

REFRIGERATOR, 1PH-115V-1/4HP

GROUNDING TYPE) W/PLUG

SINGLE RECEPTACLE (2P-3W-20A-125V

GROUNDING TYPE) W/PLUG FOR

WASHER (1PH-115V-1/2HP)

(1PH-120/208V-24A)

GROUNDING TYPE) W/PLUG FOR DRYER

SINGLE RECEPTACLE (3P-4W-30A-125/250V

ENCLOSED CIRCUIT BREAKER

(1P-100AF-20AT, 120VAC,

DEVICE, NEMA 1 ENCL

10,000AIC SYM) W/LOCKING

MAGNETIC MOTOR STARTER, 2P-120V

NEMA SIZE "00" W/O.L RELAYS,

PILOT LAMP(GREEN), AND 3-POSITION

SELECTOR SWITCH (H-O-A)

MA,MC

NEMA 1 ENCL

FCU1 FAN COIL UNIT-1

SUPPLY FAN: 1PH-220V-45W

W/BUILT-IN CONTROLLER

(UNDER MECH ITEM)

FCU2 FAN COIL UNIT-2

SUPPLY FAN: 1PH-220V-35W

W/BUILT-IN CONTROLLER

(UNDER MECH ITEM)

WATER CHILLER-1

COMP: 3PH-220V-7.5KW x1EA

W/BUILT-IN CONTROLLER

(UNDER MECH ITEM)

COND. FAN: 3PH-220V-0.2KW x2EA

(UNDER MECH ITEM)

EXHAUST FAN-1

1PH-115V-45W

EF-1

(UNDER MECH ITEM)

HOT/CHILLED

3PH-200V-2HP

P-1

(UNDER MECH ITEM)

DOMESTIC HOT

1PH-115V-1/4HP

P-2

(UNDER MECH ITEM)

MAGNETIC MOTOR STARTER, 3P-208V

NEMA SIZE "0" W/O.L RELAYS,

PILOT LAMP(GREEN), AND 3-POSITION

SELECTOR SWITCH(H-O-A) AND

CONTROL TR, NEMA 1 ENCL

WATER CIRC PUMP-1

WATER CIRC PUMP-2

DOMESTIC HOT

1PH-115V-1/3HP

DWH

W/BUILT-IN CONTROLLER

WATER HEATER

(UNDER MECH ITEM)

SAFETY SWITCH, 3PST, 240V, 60A

W/40A FUSE, NEMA 3R ENCL

GROUND FAULT PROTECTED

DUPLEX RECEPTACLE (2P-3W-20A-125VAC,

GROUNDING TYPE)

"WP" TYPE, GROUND FAULT PROTECTED

DUPLEX RECEPTACLE (2P-3W-20A-125VAC,

GROUNDING TYPE)

EF-2

EXHAUST FAN-2

1PH-115V-1/4HP

W/DISCONNECT SWITCH

(UNDER MECH ITEM)

BOILER-1

W/BUILT-IN CONTROLLER

(UNDER MECH ITEM)

1PH-115V-1/3HP

"EM"

WHM

WATTHOUR METER

SEE POWER ONE-LINE DIAGRMA EP601

SINGLE RECEPTACLE (2P-3W-20A-250VAC,

GROUNDING TYPE) FOR TRUNK BRIDGER

AMPLIFIER, SHALL BE INSTALLED INSIDE

CTC

THE CATV CABINET

DUPLEX RECEPTACLE (2P-3W-20A-125VAC,

GROUNDING TYPE) FOR TRUNK BRIDGER

AMPLIFIER, SHALL BE INSTALLED INSIDE

CTC

THE CATV CABINET

SINGLE RECEPTACLE (2P-3W-20A-250VAC,

GROUNDING TYPE) W/CORD-SET

FOR FAN COIL UNIT (UNDER MECH ITEM)

INSIDE OR BEHIND THE FCU.

POWER CONNECTION OUTLET SHALL BE LOCATED

ACU SPLIT AIR CONDITIONING UNIT

INDOOR UNIT: 1PH-115V-1.1A(IN)

W/BUILT-IN CONTROLLER

(UNDER MECH ITEM)

ACU SPLIT AIR CONDITIONING UNIT

COMP: 1PH-115V-7.5A(OUT)

W/BUILT-IN CONTROLLER

(UNDER MECH ITEM)

COND. FAN: 1PH-115V-0.6A

SAFETY SWITCH, 2PST, 240V, 30A

W/20A FUSE, NEMA 3R ENCL

SEE NOTE 2 BELOW

(MH: +955mm TO BOTTOM OF ENCL)

NEW GROUND FL MECH POWER PLAN

SCALE : 1/100

(MH: +150mm ABOVE THE COUNTER TOP)

SINGLE RECEPTACLE (2P-3W-20A-125V

GROUNDING TYPE) W/PLUG FOR MICROWAVE,

1PH-120V-1100W (LOCATED INSIDE

CABINET WHERE MICROWAVE IS PLACED)

B C D

E F G H

SYMBOL BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMYSEE SHEET NO E-1.

SEE PLAN E-2

ELECTRICAL

NEW GROUND FL POWER PLANS

E-4

CCTV

CLOSET/CCTV

TAK, YS

185600

1PH-115V, 1KW

EUH

ELECTRIC UNIT HEATER-1

BUILDING S-81, CP CASEY

225AT

225AF

90AT

100AF

CONDUCTOR, #2(G) IN 21C

NEW GROUNDING

3PH, 4W, 120/208V, 60HZ

SYSTEM, NEMA 1 ENCL

CU BUS, 225A

10,000AIC SYM

S/NGND

2#12 & 1#12(G) IN 16C

10,000AIC SYM) W/LOCKING

(1P-100AF-20AT, 120VAC,

ENCLOSED CIRCUIT BREAKER "EM"

MAIN PANELBOARD "MP"

WHM

TR TYPE, W/CT'S 225/5Ax3EA

120/208V, 60Hz SYSTEM, NEMA 3R ENCL.

AND 15MIN DEMAND REGISTER FOR 3PH, 4W,

WITH NEW ADVANCED DIGITAL WATTHOUR METER,

"EM"

321 21

"P2"

FOR ABBREVIATION, LEGEND, AND GENERAL NOTES1.

NOTES

PROVIDE A LABEL WITH THE FOLLOWING INSCRIPTION

"FIRE PROTECTION/LIFE SAFETY EQUIPMENT" CONSTRUCT

AND FASTEN THE LABEL IDENTICAL TO THE PANEL

NAMEPLATE, EXCEPT THE LABEL MUST BE RED LAMINATED

PLASTIC WITH THE WHITE CENTER CORE.

3. ENCLOSURE OF FIRE PANEL SHALL BE PAINTED WITH RED.

EXIST/NEW POWER ONE-LINE DIAGRAM

NOT TO SCALE

4#2 &

1#8(G)

IN 41C

REPLACE THE DETERIORATED EXISTING WHM

4#1/0 "WP"

NEW O/H SEC LINE,

SPARE

SEE NOTE 2 & 3 BELOW.

DEVICE, NEMA 1 ENCL

CONN TO FIRE ALARM/MASS

2#12 & 1#12(G) IN 16C

NOTIFICATION CONTROL PANEL

100AT

4#2 &

1#8(G)

IN 41C

100AF

40AT

100AF

20AT

100AF

20AT

NEW SEC RACK (4-SPOOL)

AND ENTRANCE CAP

(103dia-4 HOLES)

NEMA 1 ENCL

SURGE SUPPRESSOR

TRANSIENT VOLTAGE

"P1"

TVSS

4#4/0 IN 103C

NEW SEC LINE,

3#10 &

1#10(G)

IN 21C

EXT

COMP: 3PH-220V-7.5KW x1EA

COND. FAN: 3PH-220V-0.2KW x2EA

WATER CHILLER-1

W/BUILT-IN CONTROLLER

SAFETY SWITCH, 3PST, 240V, 60A

W/40A FUSE, NEMA 3R ENCL

EXT

SPARE

EXIST FUSE CUTOUT SWITCH,

EXIST GROUNDING WIRE

TO REMAIN

(3PH, 4W, 11.4KV,

EXIST O/H PRIM LINE

60HZ SYSTEM)

EXIST LIGHTNING ARRESTER

TO REMAIN

NEW SEC RACK (4-SPOOL)

W/WELDING CONNECTION

NEW GROUND ROD, COPPER

CLAD STEEL, 19diax3000LG

(TYPICAL)

B C D

E F G H

SYMBOL BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

SEE SHEET NO. E-1.

EXIST CON'C POLE

ELECTRICAL

E-5

EXIST/NEW POWER ONE-LINE DIAGRAM

NEW POLE MOUNTED TRANSFORMER,

1PH, 11.4KV-120/240V, 60HZ, 50KVAX3EA

NEW O/H SEC BUS WIRE

NEW GROUNDING WIRE, AWG#3/0"BC"

W/WELDING CONNECTION

NEW GROUND ROD, COPPER

CLAD STEEL, 19diax3000LG

(TYPICAL)

TAK, YS

185600

NEW O/H PRI LINE,

3- #2/0, 24KV & 1-#2/0, 600V

BUILDING S-81, CP CASEY

2 SETS OF (4#4/0)

TOTAL DEMAND LOAD ; 74,968 (VA)

TOTAL LOAD 122240 40840 40675

LOAD

TOTAL

MAIN PANELBOARD "MP" LOAD SCHEDULE

LOAD DESCRIPTION

NO.

CKT

GND

S/N

DIAGRAM

CONNECTION

CIRCUIT BREAKER

PHASE LOAD

A B PC AT

SIZE

AF AIC

B CA N G

REMARK

MAIN 3P-225AF-225AT CIRCUIT BREAKER

MTD TYPE, NEMA 1 ENCL.

60HZ, SN & GND, SURFACE

3PHASE ,4WIRE, 120/208V,

40725

PANELBOARD "P1"

RCPT FOR CATV EQUIPMENT

TVSS 30 4#10&1#10(G)

3 10000100 90

SPARE

4#2 & 1#8(G)

TOTAL DEMAND LOAD ; 32,958 (VA)

TOTAL LOAD 49617 16849 15767

LOAD

TOTAL

PANELBOARD "P2" LOAD SCHEDULE

LOAD DESCRIPTION

NO.

CKT

GND

S/N

DIAGRAM

CONNECTION

CIRCUIT BREAKER

PHASE LOAD

A B PC AT

SIZE

AF AIC

B CA N G

REMARK

MAIN 3P-100AF-100AT CIRCUIT BREAKER

17001

924 924

300 300

1 10000100 2#12&1#12(G)

HOOD FAN & LIGHT 2.5A

300300

670 670

ARC-FAULT

RCPTS 360VAx1, 180VAx2

2#12&1#12(G)

ARC-FAULT

PANELBOARD "P2"

25 26

32356470

300 300

MICROWAVE, 1100VA

REF, 1/4HP

2#12&1#12(G)

90FCU-1 (45W) x4 180

1000SPARE 1000

4#2&1#8(G)

4#2 & 1#8(G)

TOTAL DEMAND LOAD ; 30,896 (VA)

TOTAL LOAD 43903 14211 14992

LOAD

TOTAL

PANELBOARD "P1" LOAD SCHEDULE

LOAD DESCRIPTION

NO.

CKT

GND

S/N

DIAGRAM

CONNECTION

CIRCUIT BREAKER

PHASE LOAD

A B PC AT

SIZE

AF AIC

B CA N G

REMARK

MAIN 3P-100AF-90AT CIRCUIT BREAKER

MTD TYPE, NEMA 1 ENCL.

60HZ, SN & GND, FLUSH

3PHASE ,4WIRE, 120/208V,

14700

720 720

1000 1000

1 10000100 20

720 720

2#12&1#12(G)

ARC-FAULT

10002000

1000 1000

REF, 1/4HP

2#12&1#12(G)

1000SPARE 1000

540 3 4

RCPTS 360VAx1, 180VAx2

RCPTS 180VAx3

540RCPTS 180VAx3

RCPTS 360VAx1, 180VAx2

RCPTS 180VAx3 540

RCPTS 360VAx1, 180VAx3

RCPTS 360VAx1, 180VAx3 900

ELEC RANGE, 6470W

HOOD FAN & LIGHT 2.5A

50 2#8&1#10(G)

RCPTS 180VAx3

MTD TYPE, NEMA 1 ENCL.

60HZ, SN & GND, FLUSH

3PHASE ,4WIRE, 120/208V,

5 6

2FL 1/32W x2

LIGHT, LED 25W x12, 4.99W x2, FL 1/32W x2, EXH FAN-1 45Wx3

LIGHT, LED 50W x9, 18W x6, 45W x2

720 720

RCPTS 360VAx1, 180VAx2 720 720

RCPTS 180VAx3 540

RCPTS 180VAx3

RCPTS 360VAx1, 180VAx2

RCPTS 360VAx1, 180VAx2 720

RCPTS 360VAx1, 180VAx2

RCPTS 180VAx3

RCPTS 360VAx1, 180VAx2

436 436

997 997 7 8

2#12&1#12(G)

ELEC RANGE, 6470W

50 2#8&1#10(G)

HOOD FAN & LIGHT 2.5A

1 20

COND. FAN: 0.2KW x2EA

WC, COMP: 7.5KW x1EA, PUMP-1, 2HP

SPACE

EXH FAN-1 45Wx4

LIGHT, LED 50W x12, 18W x8, FCU-1 (45W) x3, FCU-2 (35W) x2 2

20 2#12&1#12(G)

RCPT FOR COMM EQUIPMENT

1RCPT FOR COMM EQUIPMENT

RCPT FOR CATV EQUIPMENT

RCPTS 180VAx1

SPARE

35 SPARE

1 20

10811081

11001100

10001000

1000SPARE 1000

1100MICROWAVE, 1100VA 1100

COMP:7.5A, COND. FAN: 0.6A

ACU-1, IN DOOR: 1.1A

2#12&1#12(G)

7900 2633 2633 2634

2703 901 901 901

3000 1000 10001000 20

3#12&1#12(G)

3#10&1#10(G)

DWH-1, 1/3HP 830

PUMP-2, 1/4HP 670

BOILER-1, 1/3HP 830

EXH FAN-2, 1/4HP 670

1000 20

10001000

1000 1000SPARE

SPARE

--------SPACE

SPACE

1 20100 10000

RCPTS 180VAx2

RCPTS 180VAx4 720 720

WASHER, 1/2HP

360 360

1130 1130

11 DRYER, 24A 4992 2

20 10000 2#12&1#12(G)

2#10&1#10(G)

2496 112496

12 13

2#12&1#12(G)

17 20

19 22

21 24

--------SPACE

10001000

SPACE 10001000

W/PULL WIRE FOR FUTURE USE.

NOTE

1. FOR FLUSH MOUNTED PANELBOARD, CONTRACTOR SHALL PROVIDE EMPTY CONDUITS

FOR FUTURE POWER CKTS.

PANELBOARD

W/PULL WIRES

(3EA OF 16C)

PROVIDE EMPTY CONDUITS

FLUSH MOUNTED

(100x100x50D)(3EA)

W/BLANK COVER

TYPICAL FLUSH MTD PANELBOARD INSTALL DETAIL

NOT TO SCALE

PROVIDE JUNCTION BOX

180 180

11001100

SPARE 1000100037

MICROWAVE, 1100VA

MICROWAVE, 1100VA 2#12&1#12(G)

1000SPARE 1000

11001100

43903 14211 1499214700

49617 16849 1576717001

B C D

E F G H

SYMBOL BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

ELECTRICAL

LOAD SCHEDULE & DETAIL

E-6

TAK, YS

185600

ELECTRIC UNIT HEATER-1, 1KW

BUILDING S-81, CP CASEY

81 80

B C D

E F G H

SYMBOL BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

1/200SCALE :

NOTES

1. FOR ABBREVIATION, LEGEND AND GENERAL NOTES

SEE SHEET NO. E-1.

NEW ELEC & TEL EXTERIOR DISTRIBUTION PLAN

EXIST O/H CATV LINE

(TYPICAL)

EXIST O/H PRI LINE

(TYPICAL)

WITH NEW O/H SEC LINE, 4#1/0

REPLACE EXIST O/H SEC LINE

S-81 (TYPICAL)

ACCESSORIES FOR BLDG.

"WP" , SEC. RACKS (4-SPOOL) &

(TYPICAL)

EXISTING EXTERIOR LIGHT

ELECTRICAL

DISTRIBUTION PLAN

NEW EXTERIOR ELEC & COMMUNICATION

E-7

EXISTING TELEPHONE PEDESTAL TO REMAIN

"TTB"

MECH ROOM

COMM CLOSET

103dia PVC CONDUIT

1WAY: 1-25PAIR #24AWG TEL CABLE

NEW U/G COMM LINE ONE WAY OF

FOR EXIST EXTERIOR LIGHT

NEW O/H SEC LINE, 2-AWG"8", "WP"

120/240V, 60HZ, 50KVAx3EA

REPLACE EXIST POLE MOUNTED TRANSFORMER,

WITH NEW, SELF-COOLED, OIL-FILLED, 1PH, 11.4KV-

TO NEW TRANSFORMERS

EXIST O/H SEC LINE/ RE-CONNECT

QUAD SHIELDED IN 35C

COAXIAL CABLE RG 11/U

TAK, YS

185600

BUILDING S-81, CP CASEY

B C D

E F G H

SYMBOL BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

NEW GROUND FL FIRE ALARM/MASS NOTIFICATION SYSTEM PLAN

SCALE : 1/100

FIRE ALARM/MASS NOTIFICATION SYSTEM SEQUENCE OF OPERATION

NOT TO SCALE

THE SWITCH FOR THE MANUAL OVERRIDE OF THE FIRE ALARM EVACUATION OCCUPANT NOTIFICATION APPLIANCES

SHALL BE LOCATED AT THE BLDG MASS NOTIFICATION SYSTEM AUTONOMOUS CONTROL UNIT AND SHALL BE LABELED

WITH AN ID PLATE: "FIRE ALARM SYSTEM OVERRIDE"

NOTE:

SYSTEM OUTPUT

OPEN CIRCUIT X

ACTIVATION OF A MANUAL PULL STATION X X

FIRE ALARM SYSTEM SEQUENCE OF OPERATIONS

SYSTEM INPUT

BLDG. #81

A N

N U

N C

T E A

M Z

O N E A

T C

O M

E D F

E A

T R

A N S

U P E R

O R

Y S

N A L

T O F

E D

E P A R T

M E N T

T R

A N S

R O

U B

N A L

T O F

E D

E P A R T

M E N T

A N

N U

N C

T E S

U P E R

O R

Y Z

O N E A

T C

O M

E D F

A N

N U

N C

T E T

R O

U B

O N E A

T F

E A

1 2 3

T R

A N S

M S

N A L

T O F

E D

E P A R T

M E N T

4 5 6 7

/M A S S N

O T

A T

N C

O N T R

O L P A N E L

R M /M

A S S N

O T

A T

N C

O N T R

O L P A N E L

/M A S S N

O T

A T

N C

O N T R

O L P A N E L

MASS SYSTEM ACTIVATION BY PRE-RECORDED MESSAGE OR MICROPHONE BUTTON ACTIVATION

MANUAL MASS OVERRIDE SWITCH

RESET MASS NOTIFICATION SYSTEM DURING FIRE ALARM CONDITION

ACTIVATION OF SMOKE DETECTOR WITH SOUNDER BASE IN BED ROOM XX

A C T

A T E S

M O

K E D

E T E C T O

R S

O U

N D E R B

A S E

A C T

A T E V

N D A

U D

E A

M N

O T

A T

N D

E V

E S

10 11

A C T

A T E V

N D A

U D

N S N

O T

A T

N D

E V

E S

X X

GROUND FAULT

NOTIFICATION APPLIANCE CIRCUIT SHORT

X X

M A S S M

E S S A G E S A

R E D

C O

N T

U E D

M E D

T E

U P O

N A

C T

A T

N O

F M

A S S O

V E R R

E S

C H T

H E

T E

M P O

R A R

Y A

N D

M E D

T E

V E R R

E F

R M N

O T

A T

N S

Y S T E

X X X

E D R

O O

COMBINED ADDRESSABLE FIRE ALARM/

FTR BUILDING TRANSMITTER W/BATTERY &

BATTERY CHARGER, NEMA 1 ENCL

W/MOUNTING BARCKET

OMNI-DIRECTION TYPE

FIRE ALARM ANTENNA

DIGITAL VOICE PANEL W/AMPLIFIER & BACK

SYNCHRONIZATION CONTROL MODULE,

24VDC, BUILT-IN ADDRESSABLE POINTS

UP AMPLIFIER (AS REQ'D) & MICROPHONE,

POWER MODULES PANEL(AS REQ'D) AND

MICROPHONE, BATTERY, BATTERY CHAREGER,

MODULE & RELAYS LCD ANNUNCIATOR,

MODULES AS REQ'D, PROGRAMMABLE

MASS NOTIFICATION CONTROL PANEL,

POWER SUPPLY, DIGITAL VOICE MODULE,

FMCP

W/WORDS "FIRE" + MNS-AMBER STROBE

AS REQ'D)/COMBO. (FA-CLEAR STROBE

WALL MOUNTED SPEAKER (WATTAGE

F M

SPEAKER (WATTAGE AS REQ'D)

FIRE ALARM/MASS NOTIFICATION

CEILING MOUNTED TYPE,

F ADDRESSABLE MANUAL PULL STATION

SPEAKER (WATTAGE AS REQ'D)

FIRE ALARM/MASS NOTIFICATION

WALL MOUNTED "WP" TYPE,

* ADDITIONAL LEGEND (THIS SHEET ONLY)

(FA-CLEAR STROBE W/WORDS "FIRE" +

WALL MOUNTED COMBO.

NEMA 1 ENCL

W/WORDS "FIRE" + MNS-AMBER STROBE

AS REQ'D)/COMBO. (FA-CLEAR STROBE

WALL MOUNTED SPEAKER (WATTAGE

MNS-AMBER STROBE W/WORDS "ALERT")

VISUAL SIGNAL STROBES (75 CANDELA

MINIMUM, AMBER STROBE SHALL BE

DE-RATED AS REQUIRED)

(15 CANDELA MINIMUM, AMBER STROBE

W/WORDS "ALERT") VISUAL SIGNAL STROBES

SHALL BE DE-RATED AS REQUIRED)

(75 CANDELA MINIMUM, AMBER STROBE

W/WORDS "ALERT") VISUAL SIGNAL STROBES

SHALL BE DE-RATED AS REQUIRED)

NOTES

FOR ABBREVIATION, LEGEND, AND GENERAL NOTES,1.

IT SHALL BE COORDINATED WITH THE BUILDING

FOR THE LOCATION OF OUTDOOR MNS DEVICES,3.

EXTERIOR AESTHETICALLY.

IN THE CORRIDOR 109 NEARBY MAIN ENTRANCE , ONLY

POWER BOOSTER PANELS AND FIRE ALARM PERIPHERAL

INSTALL BATTERY CABINET, BUILDING TRANSMITTER, 4.

FMCP IS INSTALLED FOR AESTHETICAL CONCEDE.

2. FIRE ALARM AND MASS NOTIFICATION SYSTEM LAYOUT

IS CONCEPTUAL. FINAL DESIGNER SHALL COMPLETE

DESIGN IN ACCORDANCE WITH THE APPLICABLE CODE,

SPECIFICATIONS AND MANUFACTURER'S EQUIPMENT

LISTING.

BED ROOM

101 BED ROOM

BED ROOM

VEST

BED ROOM

VIP BEDROOM

VEST

LAUNDRY

CORRIDOR

FMCP

SB SB SB

F M

M F

F M

FTR

FFF

F F

F F F F

F/M

F/MF/M

F/M

F/MF/MF/M

F/M

F/M F/M

F/M

F/M F/M

F/M

ROOM

MECH

COMM

SEE SHEET NO. E-1.

ELECTRICAL

NOTIFICATION SYSTEM PLAN

NEW GROUND FL FIRE ALARM/MASS

E-8

FMCPTO

EQUIPMENT IN VEST 110 .

FMCPTO

TAMPER SWITCH

(UNDER MECH ITEM) (TYPICAL)

FOR SPRINKLER SYSTEM

W/ADDRESSABLE MODULE

W/ ADDRESSABLE MODULE

CARBON MONOXIDE DETECTOR

(UNDER MECH ITEM)

FOR SPRINKLER SYSTEM

W/ADDRESSABLE MODULE

PRESSURE SWITCH

CLOSET/CCTV

BUILDING S-81, CP CASEY (PHASE#1)

BUILDING TRANSMITTERS AND REPAIR

REPLACE FIRE ALARM SYSTEM / INSTALL

TAK, YS

185600

B C D

E F G H

SYMBOL BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

FIRE ALARM/MASS NOTIFICATION SYSTEM DIAGRAM

NOT TO SCALE

24VDC, BUILT-IN ADDRESSABLE POINTS MODULES AS REQ'D,

(AS REQ'D) & MICROPHONE. NEMA 1 ENCL

DIGITAL VOICE PANEL W/AMPLIFIER & BACK UP AMPLIFIER

BATTERY CHAREGER, POWER MODULES PANEL (AS REQ'D) AND

SYNCHRONIZATION CONTROL MODULE, POWER SUPPLY,

PROGRAMMABLE MODULE & RELAYS, LCD ANNUNCIATOR,

FIRE ALARM/MASS NOTIFICATION CONTROL PANEL (FMCP),

COMBINED ADDRESSABLE

DIGITAL VOICE MODULE, MICROPHONE, BATTERY,

FIRE ALARM/MASS NOTIFICATION

CONTROL PANEL (FMCP)

1st FL.

FTR

12#14 IN 21C(FOR SIGNAL)

2#12 IN 16C(FOR POWER)

(PROGRAM OF D-21 MONACO

BUILDING TRANSMITTER

BT-XM AT LEAST 16 ZONES)

#6 "BC" IN 21C

GROUND CONDUCTOR

COAXIAL CABLE

W/CONNECTORS IN 16C

OMNI-DIRECTION TYPE

FIRE ALARM ANTENNA

W/MOUNTING BRACKET

GROUND ROD, COPPER CLAD

WITH WELDING CONNECTION

STEEL, 19mmdia x 3000mmLG

"EM"SG

G ~

CONTROL PANEL & BOOSTER PANEL)

(INSTALLED BESIDE FIRE ALARM

(RATED AS REQ'D) (TYPICAL)

SURGE PROTECTOR

2#12 & 1#12(G) IN 16C

GROUND ROD, COPPER CLAD

GROUNDING SYSTEM #6, "BC" IN 21C

CONN TO BLDG ELECTRODE

STEEL, 19mmdiax3000mmLG

WITH WELDING CONNECTION AND

ENCLOSURE

LIGHTNING ARRESTER

W/WEATHER-PROOF

ROOF FL.

104 112

F M

EXT

106 111

NOTES:

W/BATTERY & BATTERY

CHARGER, NEMA 1 ENCL

NFPA 72, 2013 EDITION.

PRERECORDED MESSAGES ARE IN ENGLISH AND HANGUL AT

CONTRACTOR SUBMITS SHOP DRAWINGS.

THE VOLTAGE DROP AND POWER SUPPLY CALCULATION

SHALL BE PROVIDED BY THE CONTRACTOR WHEN THE

(3-FEET) FROM HVAC, HOT & COLD WATER PIPING.

ALSO CONDUITS SHALL BE RUN AWAY AT LEAST 900mmTHE FIRE ALARM SYSTEM IS CONCEPTUAL. THE

MANUFACTURER'S EQUIPMENT LISTING.

SHOP SUBMITTAL TO SHOW DETAILED INSTALLATION

MANUFACTURER'S LISTED INSTALLATION

CONTRACTOR SHALL COMPLETE DESIGN AND INSTALL

13.

12.

11.

SYSTEM SHALL BE DESIGNED IN ACCORDANCE WITH

AND THE MASS MESSAGE NEEDS TO HAVE PRE ALERT

PATTERN IS REQUIRED FOR FIRE ALARM EVACUATION

VOICE EVACUATION SYSTEM IN LIEU OF TEMPORAL

ALL DEVICES AND EQUIPMENT SHALL BE UL LISTED

ELECTRICAL AND MECHANICAL SYSTEM EQUIPMENT

COORDINATE THE EXACT DEVICE LOCATIONS WITH

SWITCHES AND NON-ADDRESSABLE INITIATION

ALL TAMPER SWITCHES, FLOW SWITCHES, PRESSURE

PROHIBITED FOR ALL IDC, NAC AND SLC.

ALL CLASS "B" EXCEPTIONS IN NFPA 72, 23.4.2.2 ARE8.

7. CLASS "B" RACEWAY OF FA SYSTEM SHALL BE

SEPARATED BY A MINIMUM OF 1220mm HORIZONTAL

10. COAXIAL CABLE SHALL BE ONE PIECE BETWEEN

6. THE POWER CIRCUIT NUMBER DEDICATED TO FIRE

ALARM CIRCUIT AND ROOM LOCATION OF PANEL

LETTER "FIRE ALARM CIRCUIT" ON THE DEDICATED

FIRE ALARM CIRCUIT SHALL BE IDENTIFIED BY A RED

THE FIRE ALARM/MASS NOTIFICATION SYSTEM

CONTRACTOR SHALL BE RESPONSIBLE FOR PROVIDING

FIRE ALARM INTELLIGIBILITY/AUDIBILITY CALCULATION,

WIRE SIZE, CONDUIT SIZE, NO. OF WIRES FOR THE FIRE

POWER CIRCUIT BREAKER AND/OR DISCONNECT SWITCH.

SHALL BE INDICATED ON THE FIRE ALARM/MASS

BUILDING TRANSMITTER AND ANTENNA.

AND 305mm VERTICALLY.

DEVICES SHALL BE PROVIDED WITH CLASS "B"

THE SYSTEM FOR READY TO USE. THE NUMBER OF

DEVICES SHOWN IS THE MINIMUM REQUIRED AND THE

FINAL QUANTITY SHALL BE IN ACCORDANCE WITH THE

DEVICE LOCATIONS IN ACCORDANCE WITH THE

AND BUILDING ARCHITECTURAL FEATURES.

OR FM APPROVED.

SPECIFICATION SECTION 28.31.76.00.31 (FA) AND

HAVE PRE ALERT TEMPORAL PATTERN MIN 2 CYCLES

PROVIDE ADDITIONAL RELAYS AS REQUIRED.14.

18.

19.

20.

PER UFC 4-021-01.

17. THE MASS NOTIFICATION SYSTEM IS CONCEPTUAL. THE

NUMBER OF DEVICES SHOWN IS THE MINIMUM REQUIRED

AND THE FINAL QUANTITY SHALL BE IN ACCORDANCE

MANUFACTURER'S EQUIPMENT LISTING.

SHOP SUBMITTAL TO SHOW DETAILED INSTALLATION

THE MASS NOTIFICATION SYSTEM SHALL BE ENSURED THAT

LEAST FOR THE FOLLOWING ITEMS.

FOR ABBREVIATION, LEGEND, AND GENERAL NOTES

STROBES FOR MASS NOTIFICATION SHALL BE MARKED

STROBES FOR FIRE ALARM SHALL BE MARKED "FIRE"

"ALERT" IN RED LETTER AND W/AMBER LENS.

SYSTEM SHALL BE DESIGNED IN ACCORDANCE WITH

AND W/CLEAR LENS.

15.

CONTINUOUS 3-10 SECOND TONE, NFPA 72, 24.4.1.2.2

& 24.4.1.8.2.

THE MASS SYSTEM ACTIVATION MUST OVERRIDE THE FIRE

ALARM NOTIFICATION APPLIANCES THE MASS SYSTEM

ON THE PANEL BY SWITCH.

THIS SEQUENCE IS REQUIRED FOR BOTH PRE-RECORDED

MASS MESSAGE IS REQUIRED TO BE ANNOUNCED

IMMEDIATELY UNTIL SHUTDOWN MANUALLY.

SPECIFICATION SECTION 28.31.76.00.31 (MNS)

THE CONTRACTOR SHALL PROVIDE THE REQUIRED

TESTING TO ACHIEVE A MINIMUM CIS SCORE 0.8 AS

16.

DEVICE LOCATIONS IN ACCORDANCE WITH THE

MANUFACTURER'S LISTED INSTALLATION

AND NFPA 72, 2013 EDITION.

APPLIANCES UNTIL MASS ALERT IS CANCELED MANUALLY

ACTIVATION MUST OVERRIDE THE FIRE ALARM NOTIFICATION

MESSAGES AND MANUAL MICROPHONE INITIATED MESSAGES.

ARE IDENTICAL TO FIRE ALARM VISUAL APPLIANCES.

23.

MASS VISUAL APPLIANCE LOCATION REQUIREMENTS

AS SHOP DRAWING SUBMITTALS.

CONTRACT DRAWINGS SHALL NOT BE SUBMITTED

ARMY AND AIR FORCE PROJECTS.

WITH ANY FIRE ALARM VISUAL APPLIANCES ON

MASS VISUAL APPLIANCES SHALL NOT BE COMBINED24.

25.

22. FIRE ALARM SYMBOLS FROM NEPA 170 SHALL BE

AND ALL VISUAL APPLIANCES WITHIN THE SAME ROOM

ALL AUDIBLE APPLIANCES WITHIN THE BUILDING21.

SHALL BE SYNCHRONIZED.

VOICE EVACUATION SPEAKERS, NEPA 72.

AUDIBLE APPLIANCES SHALL PROVIDE THE STANDARD

TEMPORAL PATTERN UNLESS NFPA 101 REQUIRES

USED.

26. SHOW WEATHERPROOF EXTERIOR SPEAKERS AT ALL

EXTERIOR DOORS OR EXTERIOR GATHERING AREAS.

SHALL BE UL LISTED OFF-THE-SHELF-EQUIPMENT AND

ALL BACK-UP AMPLIFIERS WIRING AND ARRANGEMENT27.

SHALL BE TESTED TO THE STANDARDS OF UL OR RM AS

REQUIRED BY UFC 4-21-01, PARAGRAPH 4-4.3.

BOTH KOREAN AND ENGLISH.

THE MAN SHALL HAVE PRERECORDED MASSAGES IN28.

APPLICABLE CODE, SPECIFICATIONS AND

REQUIREMENTS AND WIRE COUNT.

ALARM AND DETECTION SYSTEM.

NOTIFICATION CONTROL PANEL COVER.

MODULES.

SYSTEM. VOICE EVACUATION MESSAGE NEEDS TO

REQUIRED.

WITH THE APPLICABLE CODE, SPECIFICATIONS AND

REQUIREMENTS AND WIRE COUNT.

OF 20% SPARE ADDRESSES FOR FUTURE USE.

FIRE ALARM SYSTEM OF EACH SLC TO HAVE A MINIMUM29.

VISUAL SIGNAL STROBES (75 CANDELA

MINIMUM, AMBER STROBE SHALL BE

MNS-AMBER STROBE W/WORDS "ALERT")

(FA-CLEAR STROBE W/WORDS "FIRE" +

DE-RATED AS REQUIRED) (TYPICAL)

WALL MOUNTED COMBO.

ADDRESSABLE SMOKE

DETECTOR W/SOUNDER

BASE (TYPICAL)

M F

EXT

102103109 M

MINIMUM, AMBER STROBE SHALL BE

DE-RATED AS REQUIRED)

VISUAL SIGNAL STROBES (75 CANDELA

W/WORDS "FIRE" + MNS-AMBER STROBE

W/WORDS "ALERT") VISUAL SIGNAL STROBES

AS REQ'D)/COMBO. (FA-CLEAR STROBE

WALL MOUNTED SPEAKER (WATTAGE

MNS-AMBER STROBE W/WORDS "ALERT")

ADDRESSABLE MANUAL

PULL STATION (TYPICAL)

WALL MOUNTED "WP" TYPE,

NOTIFICATION SPEAKER

FIRE ALARM/MASS

(WATTAGE AS REQ'D) (TYPICAL)

(TYPICAL)

FIRE ALARM/MASS NOTIFICATION

SPEAKER (WATTAGE AS REQ'D)

CEILING MOUNTED TYPE,

(FA-CLEAR STROBE W/WORDS "FIRE" +

(WATTAGE AS REQ'D)/COMBO.

WALL MOUNTED SPEAKER

SHALL BE DE-RATED AS REQUIRED) (TYPICAL)

(15 CANDELA MINIMUM, AMBER STROBE

SEE SHEET NO. E-1.

SYSTEM DIAGRAM

FIRE ALARM/MASS NOTIFICATION

ELECTRICAL

E-9

ADDRESSABLE SMOKE

DETECTOR

J CO

111 111 111 111 111

TAMPER SWITCH

(UNDER MECH ITEM) (TYPICAL)

FOR SPRINKLER SYSTEM

W/ADDRESSABLE MODULE

(UNDER MECH ITEM)

FOR SPRINKLER SYSTEM

W/ADDRESSABLE MODULE

PRESSURE SWITCH

W/ ADDRESSABLE MODULE

CARBON MONOXIDE DETECTOR

2) INTRUDER/HOSTILE PERSON SIGHTED WITHIN/AROUND THE BUILDING

1) BOMB THREAT OR ACTUAL BOMB WITHIN/AROUND THE BUILDING

3) OCCUPANTS DIRECTED TO TAKE COVER WITHIN THE BUILDING

6) "ALL CLEAR" MESSAGE

TEST8)

THE BUILDING

CARBON MONOXIDE GAS DETECTION MESSAGE WITHIN/AROUND 7)

THE LOCAL AREA

5) EMERGENCY WEATHER CONDITIONS APPROPRIATE FOR

NORMAL MAIN ENTRANCE/EXIT

4) EVACUATION OF THE BUILDING USING EXITS OTHER THAN THE

TAK, YS

185600

BUILDING S-81, CP CASEY

B C D

E F G H

SYMBOL BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

NEW GROUND FL TEL/CATV SYSTEM PLAN

SCALE : 1/100

SCALE: 1:100

0 1000 2000 4000

NOTES

1. FOR ABBREVIATION, LEGEND, AND GENERAL NOTES

IN THE BUILDING SHALL BE DONE BY THE CONTRACTOR

THE INTERIOR CATV CABLES TO CATV EQUIPMENT

UNDER SUPERVISION OF CATV OFFICE.

"TTB"

CTC

+1350

COAXIAL CABLE RG 6/U QUAD

SHIELDED IN 16C (TYPICAL)

CAT-6, 2-4PAIR, #24AWG IN 27C

TO BE TERMINATED AT PATCH

PANEL (TYPICAL)

DUAL MODULAR JACK

CAT-6, 8-PIN (RJ45 TYPE)

W/COVER PLATE (TYPICAL)

WALL MOUNTED TYPE TV OUTLET

W/"0.0"dB LOSS FACE PLATE &

F-81 BARREL TYPE CONNECTOR

CAT-6, 1-4PAIR, #24AWG IN 27C

TO BE TERMINATED AT PATCH

PANEL (TYPICAL)

SINGLE MODULAR JACK

CAT-6, 8-PIN (RJ45 TYPE)

W/COVER PLATE & LUG

(TYPICAL)

TV TV TV

TVTVTV

CTV

CTV CTV

BED ROOM

VEST

BED ROOM

VIP BEDROOM

VEST

LAUNDRY

CORRIDOR

COMM

ROOM

MECH

TELEPHONE TERMINAL BOARD (TTB)

SEE DIAGRAM 1

CATV DISTRIBUTION CABINET "CTC"

SEE DIAGRAM 2

SEE SHEET NO E-1.

E11

ELECTRICAL

NEW GROUND FL TEL/CATV SYSTEM PLAN

E-10

CCTV

PRIOR TO CONSTRUCTION.

LOCATION OF CCTV CAMERAS WITH DPW, USING AGENCY

AND WIRING/CONDUIT. CONTRACTOR SHALL CONFIRM

AND MONITORING SYSTEM WITH ASSOCIATED ACCESSORIES

SHALL REMOVE/REINSTALL EXISTING CCTV CAMERAS

EXIST CCTV MONITORING SYSTEM/ CONTRACTOR

CLOSET/CCTV

TAK, YS

185600

BUILDING S-81, CP CASEY

B C D

E F G H

SYMBOL BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

(TYPICAL)

CABLE SUPPORT

QUADPLEX RECEPTACLE

2P-3W-20A-125V

GROUNDING TYPE

EXOTHERMIC WELDING, LISTED COMPRESSION TWO-

1. THE CONNECTIONS OF THE BONDING CONDUCTOR FOR

TELECOMMUNITIONS TO THE TMGB SHALL UTILIZE

HOLE LUGS, SUITABLE AND EQUIVALENT TWO-HOLE

2. THREE WALLS SHALL BE COVERED WITH PLYWOOD.

FINISHED FLOOR AND SHALL BE PLACED WITHIN 75mm

3. ENTRANCE CONDUITS SHALL EXTEND 150mm ABOVE

PLYWOOD SHALL BE FIRE-RATED.

NOTES:

CROSS CONNECTING

PATCH CORD AS REQ'D

(1-100PAIR) (TYPICAL)

110 TYPE TERMINAL BLOCK

(1-100PAIR)

PTB

1-25PAIR, #24AWG TEL CABLE

TELEPHONE TERMINAL BOARD (TTB)

2500x2400x19THK PLYWOODx1EA

SEE NOTE 2 BELOW.

CONDUIT STUB-UP W/SEALING

(150mm AFF) (TYPICAL)

COMM CLOSET 113 ENTRANCE TERMINAL BLOCK

110 TYPE PROTECTED

"MP" GROUNDING BUS BAR

1#6 "BC" IN 21C

CONN TO MAIN PANELBOARD

GROUNDING BUSBAR (TMGB)

(100mm(W) x6.4mm(D) x450mmLG)

GROUND WIRE

TELECOMMUNICATION MAIN

CONDUCTOR #6AWG

P1-24

TEL SYSTEM DIAGRAM

NOT TO SCALE

SEE SITE PLAN

CONDUIT COUPLING

(TYPICAL)

WALL TYPE 1-24 PORT

PATCH PANEL "B"

STAMP FACING OUT" TO ENSURE THAT THEY CAN BE

"PLYWOOD WILL BE INSTALLED WITH FIRE RATED

4. TEST RESULTS WILL BE PROVIDED IAW THE MOST RECENT

REVISION OF THE ANSI/TIA/EIA-568.

5. LABEL ALL DROPS IAW TIA/EIA-606-A.

6. LABEL ALL GROUNDS IAW I3A.

LUGS ARE PREFERRED.

FIELD VERIFIED.

OF A WALL.

1st FL.

ROOF

T T

101 102 102

WALL MOUNTED TYPE TV OUTLET

W/"0"dB LOSS FACE PLATE &

F-81 BARREL TYPE CONNECTOR

(TYPICAL)

P1-25

#6 "BC" IN 21C

GROUNDING BUSBAR

CONN TO MAIN PANELBOARD "MP"

SINGLE RECEPTACLE, 2P-3W-

FOR TRUNK BRIDGER AMPLIFIER

20A-250VAC, GROUNDING TYPE

2-WAY SPLITTER, 8-WAY TAP OFF x2EA, P1-23

RECEPTACLE, AIR VENTS AND

LOCKING DEVICE, NEMA 1 ENCL

BACKBOARD LINE EXTENDER AMPLIFIERS,

CATV DISTRIBUTION CABINET

WITH 610x610 W/19THK PLYWOOD

762mm(W)x610mm(H)x254mm(D)

AMP

20A-125VAC, GROUNDING TYPE

CTC

FOR TRUNK BRIDGER AMPLIFIER 113

DUPLEX RECEPTACLE, 2P-3W-

1st FL.

CEILING FOR THE MAINTENANCE.

INSTALLED ABOVE THE CEILING SHALL BE MARKED ON THE

THE LOCATION OF PULL BOX WITH COUPLERS WHICH IS

THE CONTRACTOR TO MEET THE REQUIREMENT OF CATV dB.

INITIAL TESTING OF CATV SYSTEM SHALL BE PERFORMED BY7.

CATV PANEL; ONE VENT HIGH AND ONE VENT LOW.

PROVIDE DIAGONAL VENTS ON OPPOSITE SIDE OF3.

RETURN PATH(2-WAY) CAPABILITIES.

ALL CATV MATERIAL AND EQUIPMENT MUST HAVE2.

CABLE, etc. SHALL BE COMPATIBLE WITH THE

EXISTING BASE CATV SYSTEM. IT SHALL BE

THE SPECIFICATION OF MATERIALS SUCH AS CATV

OUTLET TAP UNITS, SPLITTERS, AMPLIFIER, COAXIAL

COORDINATED WITH BASE CATV PERSONNEL.

COORDINATE LOCATION OF "NODE EQUIPMENT" WITH

SPLITTERS, AND TAP-OFF'S ARE TO BE 2WAY AND

C-COR LINE EXTENDER, DIRECTIONAL COUPLERS,

RETURN PATH 5-42MHZ, TO INCLUDE ALL

OPERATE IN THE RANGE FROM 5 TO 860MHZ,

30 DAYS PRIOR TO PERFORMING FINAL ACCEPTANCE TESTING.

CONTRACTORS WILL COORDINATE WITH BASE CATV PERSONNEL

RESULTS WILL BE RECORDED AND AVAILABLE AT THE FINAL

PROJECTS ON USFK INSTALLATIONS FOR QUALITY ASSURANCE.

THEN, BASE CATV PERSONNEL WILL INSPECT/TEST ALL

COORDINATION WITH BASE CATV PERSONNEL ON THE TYPE OF

CABLE MATERIAL AND PASSIVE DEVICES TO BE USED MUST

BE AGREED UPON BY BASE CATV PERSONNEL, CONTRACTOR,

AND ANY QUALITY ASSURANCE BRANCH PERSONNEL i.e.

BASE CONTRACTOR PRIOR TO START OF WORK.

ATTENUATION'S TO COMPENSATE FOR dbMV LEVELS.

ACCEPTANCE INSPECTION.

CORPS OF ENGINEERS, KORO, BASE CATV PERSONNEL PRIOR

NOTES

WHICH DEVICE IS

LOCATED (TYPICAL)

ROOM NUMBER

(TYPICAL)

QUAD SHIELDED IN 16C

COAXIAL CABLE RG 6/U

CATV SYSTEM DIAGRAM

NOT TO SCALE

ROOF

GROUND BONDING

TO ORDERING.

P1-22

ENTRANCE CAP (35dia-1 HOLE)

WALL TYPE 1-24 PORT

PATCH PANEL "C"

W/COVER PLATE & LUG

CAT-6, 8-PIN (RJ45 TYPE)

SINGLE MODULAR JACK

PANEL "A"

TO BE TERMINATED AT PATCH

CAT-6, 1-4PAIR, #24AWG IN 27C

W/COVER PLATE (TYPICAL)

CAT-6, 8-PIN (RJ45 TYPE)

DUAL MODULAR JACK

CAT-6, 2-4PAIR, #24AWG IN 27C

(1-4PAIR TO BE TERMINATED AT

PATCH PANEL "A" AND OTHER

(TYPICAL)

WALL TYPE 1-24 PORT

PATCH PANEL "D"

WALL TYPE 1-24 PORT

PATCH PANEL "A"

1-4PAIR TO BE TERMINATED AT

PATCH PANEL "C") (TYPICAL)

T T

103 103

ELECTRICAL

TEL & CATV SYSTEM DIAGRAM

E-11

(TYPICAL)

QUAD SHIELDED IN 35C

COAXIAL CABLE RG 11/U

NEWSEC RACK (1-SPOOL) &

EXIST CATV INCOMING LINE

TAK, YS

185600

BUILDING S-81, CP CASEY

65-A

12 CM

STREAM

S T

P V C

227.5

J-4

W A

L L

W A

L L

W A

L L

WALL

W A

L L

WALL

228.4

GAL27

S T

R C

6 PVC

S T

268.6

STREAM

DISCHARGE TO

65-A

12 CM

STREAM

GRAVES

B A

S K

E T

B A

L L

U R

T E

N N I

U R

B C D

E F G H

SYMBOL BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

ELECTRICAL

LAYOUT PLAN

BUILDING TRANSMITTER LOCATION

E-12

MATCH LINE 'C'

00-49341

3-48PN

00-49341

4-200PN

00-49341

4-200PN

01-49550

00-49341

LAUNDRY

KSC

PEST

647667

UTIL

B&G

WH-1

WH-2

DPW HQ

629 685

651A

833T

808 811

746 715 726

A B

00-49341

1149 1151

10291144

1918 1879

2372A

2373T

A C

2451 2400

2648 2605

2609T

2514 2540

8008T

2540T

26462645

1991 1963

A B

18331832

1962 1812

456A

CCTT

SIMNET

463Z

SSSC

TSAK MILES 2000

549 546

8114T

560G

A B

86M

48T

39 55

134 133

186 192

202A

208 215 214

213 212

258252

249 262

1785 235

237 238

FOOT BR

VEH BR

FOOT BR

VEH BR

VEH BR 1821

VEH BR

FOOT BR

VEH BR

FOOT BR

VEH BR

FOOT BR

VEH BR

FOOT BR

1158A

1158B

RAILHEAD

MATCH LINE 'C'

447A

497A

497B

458Z

2372?

QA00894-0J

QA00893-0J

QA00892-0J

ADMIN

EXER W/LAT

QA00138-9J

QA01300-8J

00-54151 BUP 020122

00-54152 BUP 020122

00-54132 BUP 010801

00-54127 BUP 040430

00-54158 BUP 030104

00-54129 BUP 011109

00-54157 BUP AFTER 2026

00-54156 BUP 031030

00-54130 BUP 020330

00-54131 BUP 020929

00-54155 BUP 030506

03-57200 REPAIR 041007

99-47353

4-200PN

01-QA00604 BUP

XX-QA00606 BUP 0310XX

95-44142

4-184PN

95-44066

4-184PN

96-QA00466 BUP

95-44066

4-184PN

95-44066

4-184PN

95-44066

4-184PN

01-55893 BUP

99-QA00603 BUP

XX-QA00602 BUP 0310XX

99-47353

4-200PN

96-43269

4-184PN

97-44592

4-200PN

XX-QA00287 BUP

01-55894 BUP

99-51682

4-200PN

99-51820

3-48PN

97-44592

4-200PN

99-51682

4-200PN

99-51682

4-200PN

01-55882 BUP

A B

2022(?)

VEH BR

472?

455?

1839T

1840T

BARRIER

1564 1566

635A

2002B

A B

48A

A B

174 Z

706(707A)

(2298)

1071?

A B

1760?

KS-124

VEH BR?

BARRIER

FLAG

TBALL FIELD

(SYN

ETIC

RF AREA)

1919LIFT STATION

BUILDING TRANSMITTER LOCATION LAYOUT PLAN

TAK, YS

185600

: PROJECTED BUILDING

BUILDING S-81, CP CASEY

B C D

E F G H

SYMBOL BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

ELECTRICAL

1-#6 AWG (G)

BUSHING

GROUND CLAMP

21mm STEEL CONDUIT

MOUNTING BRACKET

21mm DIA BOLT (TYP)

FIN GRADE

CONNECTOR BOTH END

COAXIAL CABLE W/

25mmx25mmx3mm THK

HOT-DIPPED GALV.

ANGLE STEEL

RIGID STEEL

35mm DIA.

ANTENNA MAST

SERVICE HEAD

21mm DIA.

ANTENNA

OMNI DIRECTIONAL

915mm APART (MIN)

STRAP STEEL (TYP)

35mm DIA RSC

U-BOLT FOR

CONDUIT AS REQ'D

SEAL END OF

GND WIRE

#6 AWG "BC"

NOT TO SCALE

SEE SPECS

COPPER CLAD STL

GROUND ROD

KIT, NEMA 3R ENCL

LIGHTNING ARRESTER

WEATHERPROOF SEAL

FA ANTENNA

OMNIDIRECTIONAL

KIT IN NEMA 3R ENCL

LIGHTNING ARRESTER

CABLE IN 21mm C

ANTENNA COAXIAL

IN 21mm C

1-#6 AWG (G)

FA ANTENNA MOUNTING DETAIL

EXIST SIGNALING LINE CIRCUIT

MEET WIRING REQUIREMENT FOR FACP OR MNS

POWER AND CONTROL LINES AS REQUIRED TO

EXIST FIRE ALARM DETECTOR (TYPICAL)

NOT TO SCALE

CONNECTION DIAGRAM

TYPICAL BUILDING TRANSMITTER

NOTE

COR FOR LOCATION SELECTION.

SHALL COORDINATE WITH FIRE DEPARTMENT AND

BE NEXT TO EXIST "FACP" OR "MNS". CONTRACTOR

WITH BATTERY & CHARGER/ LOCATION SHALL

BUILDING TRANSMITTER (BT-XM)

E-13

TRANSMITTER

TO FA BUILDING

FTR

(FACP)

CONTROL PANEL

EXIST FIRE ALARM

BUILDING S-81, CP CASEY (PHASE#1)

BUILDING TRANSMITTERS AND REPAIR

REPLACE FIRE ALARM SYSTEM / INSTALL

TAK, YS

185600

BUILDING NO. ITEMS

WITH CONNECTORS

COAXIAL CABLE (CLASS I&II)

W/ RAIN PROOF ENCL.,

LIGHTNING ARRESTER

AND MOUNTING SET,

FIRE ALARM ANTENNA

WITH BATTERY & CHARGER,

TRANSMITTER (BT-XM)

11 SETS OF BUILDING

TOTAL 11 BUIDLINGS

NOT TO SCALE

BT SYSTEM BUILDING SCHEDULE

TRANSMITTER CONNECTION DIAGRAM

FA ANTENNA MOUNTING DETAIL & BUILDING

BT SYSTEM BUILDING SCHEDULE TYPICAL

LISTED BUILDINGS.

IF MASS NOTIFICATION SYSTEM IS NOT INSTALLED IN

SYSTEM OR ADDRESSABLE FIRE ALARM CONTROL PANEL

TRANSMITTER SHALL BE CONNECTED MASS NOTIFICATION

CONTROL LINES OF FIRE ALARM BUILDING

FIRE ALARM AND/ OR MASS NOTIFICATION SYSTEM POWER.

CONTRACTOR SHALL VERIFY EXISTING CONDITION OF

ATENNA, LIGHTNING ARRESTER, ETC BY BUILDING.

FOR INSTALLATION PLAN AND LOCATION OF BUILDING TRANSMITTER,

CONTRACTOR SHALL BE RESPONSIBLE TO PROVIDE SHOP DRAWING

E-1

E-2

E-3

E-4

E-5

E-6

E-7

E-8

E-9

E-10

E-11

E-12

E-13

File details come from the government source that posted it.

H1_Drawing_files___185600___ELEC.PDF

About this file

View the file

Other files

Work with this file

Text version

H1_Drawing_files_185600_ELEC.PDF