Attachments 27QA004.pdf

This document is a Performance Work Statement for Snow Removal and Sanding Services at Franklin Falls Dam, operated by the U.S. Army Corps of Engineers. The document consists of three informational maps depicting the geographic locations and service areas where snow removal and sanding services are required.

Figure 1 provides an overview of the entire Franklin Falls Dam facility and identifies key service locations along approximately 0.2 miles, including the Gatehouse Tours area, Gravel Drive, 75-Sill Entrance, Coleman Entrance, Fuel Fill, Pedestrian Entrance, Office Entrance and Ramp, and Red Stream Entrance. Figure 2 presents a detailed close-up of the Franklin Falls Office and Administrative Area, showing service locations across approximately 0.09 miles, including the 75-Sill Entrance, Coleman Entrance, Fuel Fill, Pedestrian Entrance, Office Side Entrance, Office Entrance and Ramp, and various connecting roads (Gravel Drive, Gravity Drive, and Coleman Drive). Figure 3 depicts the Franklin Falls Dam Crest and Service Bridge area across approximately 0.15 miles, identifying the Gatehouse Doors as a key service location along with the dam structure itself. All three maps use a legend indicating Franklin Points (service locations), Franklin Plowing (areas requiring snow removal and sanding), and Franklin Boundary (facility perimeter). The maps establish the geographic scope and specific areas where the contractor must perform snow removal and sanding services throughout the Franklin Falls Dam facility.