08_71_00.pdf

REPAI R AND ADD TO FI RE STATI ON W912QG-11-D-0001

McENTI RE JNGB, SC AI R NATI ONAL GUARD, EASTOVER, SC PSTE 122002 & 139022

SECTI ON 08 71 00

DOOR HARDWARE

02/16

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o i n t he t ext by t he basi c desi gnat i on onl y.

BUI LDERS HARDWARE MANUFACTURERS ASSOCI ATI ON ( BHMA)

ANSI / BHMA A156. 1 ( 2013) But t s and Hi nges

ANSI / BHMA A156. 13 ( 2012) Mor t i se Locks & Lat ches Ser i es 1000

ANSI / BHMA A156. 18 ( 2012) Mat er i al s and Fi ni shes

ANSI / BHMA A156. 2 ( 2011) Bor ed and Pr eassembl ed Locks and Latches

ANSI / BHMA A156. 3 ( 2014) Exi t Devi ces

ANSI / BHMA A156. 36 ( 2010) Auxi l i ar y Locks

ANSI / BHMA A156. 6 ( 2015) Ar chi t ect ur al Door Tr i m

ANSI / BHMA A156. 7 ( 2014) Templ at e Hi nge Di mensi ons

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 101 ( 2015; ERTA 2015) Li f e Saf et y Code

NFPA 252 ( 2012) St andar d Met hods of Fi r e Test s of Door Assembl i es

NFPA 72 ( 2013) Nat i onal Fi r e Al ar m and Si gnal i ng Code

NFPA 80 ( 2016) St andar d f or Fi r e Door s and Ot her Openi ng Pr ot ect i ves

STEEL DOOR I NSTI TUTE ( SDI / DOOR)

SDI / DOOR A250. 8 ( 2003; R2008) Recommended Speci f i cat i ons f or St andar d St eel Door s and Fr ames

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

36 CFR 1191 Amer i cans wi t h Di sabi l i t i es Act ( ADA) Accessi bi l i t y Gui del i nes f or Bui l di ngs and Faci l i t i es; Ar chi t ect ur al Bar r i er s Act ( ABA) Accessi bi l i t y Gui del i nes

SECTI ON 08 71 00 Page 1

ADDENDUM 01 30 NOVEMBER 2018

UNDERWRI TERS LABORATORI ES ( UL)

UL Bl d Mat Di r ( 2012) Bui l di ng Mat er i al s Di r ect or y

1. 2 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 02 Shop Dr awi ngs

Manuf act ur er ' s Det ai l Dr awi ngs; G

Ver i f i cat i on of Exi st i ng Condi t i ons; G

Har dwar e Schedul e; G, AE

Keyi ng Syst em; G

SD- 03 Pr oduct Dat a

Har dwar e I t ems; G, AE

SD- 08 Manuf act ur er ' s I nst r uct i ons

Installation

SD- 10 Oper at i on and Mai nt enance Dat a

Har dwar e Schedul e I t ems, Dat a Package 1; G

SD- 11 Cl oseout Submi t t al s

Key Bi t t i ng

1. 3 SHOP DRAWI NGS

Submit manuf act ur er ' s det ai l dr awi ngs i ndi cat i ng al l har dwar e assembl y component s and i nt er f ace wi t h adj acent const r uct i on. I ndi cat e power component s and wi r i ng coor di nat i on f or el ect r i f i ed har dwar e. Base shop dr awi ngs on ver i f i ed f i el d measur ement s and i ncl ude ver i f i cat i on of exi st i ng condi t i ons.

1. 4 PRODUCT DATA

I ndi cat e f i r e- r at i ngs at appl i cabl e component s. Pr ovi de document at i on of ABA/ ADA accessi bi l i t y compl i ance of appl i cabl e component s, as r equi r ed by 36 CFR 1191 Appendi x D - Techni cal .

1. 5 HARDWARE SCHEDULE

Pr epar e and submi t har dwar e schedul e i n t he f ol l owi ng f or m:

SECTI ON 08 71 00 Page 2

Hardware Item

Quantity Size Reference Publi-cation Type No.

Finish Mfr Name and Catalog No.

Key Control Symbols

UL

Mark (If fire-rated and listed)

BHMA

Finish Desig-nation

I n addi t i on, submi t har dwar e schedul e dat a package 1 i n accor dance wi t h Section 01 78 23 OPERATI ON AND MAI NTENANCE DATA.

1. 6 KEY BI TTI NG CHART REQUI REMENTS

1. 6. 1 Requirements

Submit key bi t t i ng char t s t o t he Cont r act i ng Of f i cer pr i or t o compl et i on of t he wor k. I ncl ude:

a. Compl et e l i s t i ng of al l keys ( e. g. AA1 and AA2) .

b. Compl et e l i s t i ng of al l key cut s ( AA1- 123456, AA2- 123458) .

c. Tabul at i on showi ng whi ch key f i t s whi ch door .

d. Copy of f l oor pl an showi ng door s and door number s.

e. Li st i ng of 20 per cent mor e key cut s t han ar e pr esent l y r equi r ed i n each mast er syst em.

1. 7 QUALI TY ASSURANCE

1. 7. 1 Har dwar e Manuf act ur er s and Modi f i cat i ons

Pr ovi de, as f ar as f easi bl e, l ocks, hi nges, st r i ke pl at es, and cl oser s of one l ock, hi nge, or c l oser manuf act ur er ' s make. Modi f y har dwar e as necessar y t o pr ovi de f eat ur es i ndi cat ed or speci f i ed.

1. 7. 2 Key Shop Dr awi ngs Coor di nat i on Meet i ng

Pr i or t o t he submi ssi on of t he key shop dr awi ng, t he Cont r act i ng Of f i cer , Cont r act or , Door Har dwar e Subcont r act or , usi ng Act i v i t y and Base Locksmi t h must meet t o di scuss and coor di nat e key r equi r ement s f or t he f aci l i t y .

1. 8 DELI VERY, STORAGE, AND HANDLI NG

Del i ver har dwar e i n or i gi nal i ndi v i dual cont ai ner s, compl et e wi t h necessar y appur t enances i ncl udi ng f ast ener s and i nst r uct i ons. Mar k each i ndi v i dual cont ai ner wi t h i t em number as shown on har dwar e schedul e. Del i ver per manent keys and r emovabl e cor es t o t he Cont r act i ng Of f i cer , ei t her di r ect l y or by cer t i f i ed mai l . Del i ver const r uct i on mast er keys wi t h t he locks.

PART 2 PRODUCTS

2. 1 TEMPLATE HARDWARE

Har dwar e appl i ed t o met al or t o pr ef i ni shed door s must be manuf act ur ed

SECTI ON 08 71 00 Page 3 usi ng a t empl at e. Pr ovi de t empl at es t o door and f r ame manuf act ur er s i n accor dance wi t h ANSI / BHMA A156. 7 f or t empl at e hi nges. Coor di nat e har dwar e i t ems t o pr event i nt er f er ence wi t h ot her har dwar e.

2. 2 HARDWARE FOR FI RE DOORS AND EXI T DOORS

Pr ovi de al l har dwar e necessar y t o meet t he r equi r ement s of NFPA 72 f or door alarms, NFPA 80 f or f i r e door s, NFPA 101 f or exi t door s, NFPA 252 f or f i r e t est s of door assembl i es, ABA/ ADA accessi bi l i t y r equi r ement s, and al l ot her r equi r ement s i ndi cat ed, even i f such har dwar e i s not speci f i cal l y ment i oned i n par agr aph HARDWARE SCHEDULE. Pr ovi de Under wr i t er s Labor at or i es, I nc. l abel s f or such har dwar e i n accor dance wi t h UL Bl d Mat Di r or equi val ent l abel s i n accor dance wi t h anot her t est i ng l abor at or y appr oved i n wr i t i ng by t he Cont r act i ng Of f i cer .

2. 3 HARDWARE I TEMS

Cl ear l y and per manent l y mar k wi t h t he manuf act ur er ' s name or t r ademar k, hi nges, pi vot s, l ocks, l at ches, exi t devi ces, bol t s and cl oser s wher e t he i dent i f y i ng mar k i s v i s i bl e af t er t he i t em i s i nst al l ed. For c l oser s wi t h cover s, t he name or t r ademar k may be beneat h t he cover . Coor di nat e el ect r i f i ed door har dwar e component s wi t h cor r espondi ng component s speci f i ed i n Di v i s i on 28 ELECTRONI C SECURI TY SYSTEMS ( ESS) .

2. 3. 1 Hinges

Pr ovi de i n accor dance wi t h ANSI / BHMA A156. 1. Pr ovi de hi nges t hat ar e 4- 1/ 2 by 4- 1/ 2 i nch unl ess ot her wi se i ndi cat ed. Const r uct l oose pi n hi nges f or i nt er i or door s and r ever se- bevel ext er i or door s so t hat pi ns ar e non- r emovabl e when door i s c l osed. Ot her ant i - f r i c t i on bear i ng hi nges may be pr ovi ded i n l i eu of bal l bear i ng hi nges.

2. 3. 2 Locks and Lat ches

2. 3. 2. 1 Mor t i se Locks and Lat ches

Pr ovi de i n accor dance wi t h ANSI / BHMA A156. 13, Ser i es 1000, Oper at i onal Gr ade 1, Secur i t y Gr ade 2. Pr ovi de knobs and r oses of mor t i se l ocks wi t h scr ewl ess shanks and no exposed scr ews.

2. 3. 2. 2 Bor ed Locks and Lat ches

Pr ovi de i n accor dance wi t h ANSI / BHMA A156. 2, Ser i es 4000, Gr ade 1.

2. 3. 2. 3 Auxi l i ar y Locks

Pr ovi de i n accor dance wi t h ANSI / BHMA A156. 36, Gr ade 1.

2. 3. 3 Exi t Devi ces

Pr ovi de i n accor dance wi t h ANSI / BHMA A156. 3, Gr ade 1. Pr ovi de adj ust abl e st r i kes f or r i m t ype and ver t i cal r od devi ces. Pr ovi de open back st r i kes f or pai r s of door s wi t h mor t i se and ver t i cal r od devi ces.

2. 3. 4 Cyl i nder s and Cor es

Pr ovi de cyl i nder s and cor es f or new l ocks, i ncl udi ng l ocks pr ovi ded under ot her sect i ons of t hi s speci f i cat i on. Pr ovi de cyl i nder s and cor es wi t h seven pi n t umbl er s. Pr ovi de cyl i nder s f r om t he pr oduct s of one

SECTI ON 08 71 00 Page 4 manuf act ur er , and pr ovi de cor es f r om t he pr oduct s of one manuf act ur er . Ri m cyl i nder s, mor t i se cyl i nder s, and knobs of bor ed l ockset s have i nt er changeabl e cor es whi ch ar e r emovabl e by speci al cont r ol keys. St amp each i nt er changeabl e cor e wi t h a key cont r ol symbol i n a conceal ed pl ace on t he cor e.

Pr ovi de cyl i nder s f or new l ocks, i ncl udi ng l ocks pr ovi ded under ot her sect i ons of t hi s speci f i cat i on. Pr ovi de f ul l y compat i bl e cyl i nder s of Gr ade 1 pr oduct s f r om pr oduct s of one manuf act ur er wi t h i nt er changeabl e cor es t hat ar e r emovabl e by a speci al cont r ol key. Submi t a cor e code sheet wi t h t he cor es. Pr ovi de mast er keyed cor es i n one syst em f or t hi s pr oj ect . Pr ovi de const r uct i on i nt er changeabl e cor es.

2. 3. 5 St r i ke Pl at es

Pr ovi de manuf act ur er ' s st andar d st r i ke pl at e f or each l ock bol t or l at chbol t compl y i ng wi t h r equi r ement s i ndi cat ed f or appl i cabl e l ock or l at ch and wi t h st r i ke box and cur ved l i p ext ended t o pr ot ect f r ame;

f i ni shed t o mat ch l ock or l at ch.

2. 3. 6 Cl oser Hol der s

Pr ovi de header mount ed c l oser hol der devi ces i ndi cat ed on dr awi ngs and as scheduled.

2. 3. 7 Tamper Resi st ance

Pr ovi de l ock mechani sm encased i n har dened guar d bar r i er s t o det er f or ced entry.

2. 3. 8 Mount i ng Met hod

Pr ovi de el ect r omagnet i c l ock sui t abl e f or use wi t h s i ngl e and doubl e door wi t h mor t i se or r i m t ype har dwar e and compat i bl e wi t h r i ght or l ef t hand mounting.

2. 3. 9 Lock Tr i m

2. 3. 9. 1 Lever Handl es

Pr ovi de l ever handl es wher e i ndi cat ed i n t he Har dwar e Schedul e. Pr ovi de i n accor dance wi t h ANSI / BHMA A156. 3 f or mor t i se l ocks of l ever handl es f or exi t devi ces. Pr ovi de l ever handl e l ocks wi t h a br eakaway f eat ur e ( such as a weakened spi ndl e or a shear key) t o pr event i r r epar abl e damage t o t he l ock when f or ce i n excess of t hat speci f i ed i n ANSI / BHMA A156. 13 i s appl i ed t o t he l ever handl e. Pr ovi de l ever handl es r et ur n t o wi t hi n 1/ 2 i nch of t he door f ace.

2. 3. 10 Keys

Provide t wo keys per l ock.

2. 3. 11 Door Pr ot ect i on Pl at es

Pr ovi de i n accor dance wi t h ANSI / BHMA A156. 6.

2. 3. 11. 1 Ki ck Pl at es

Pr ovi de k i ck pl at es on push- si de of al l egr ees door s, except at al umi num

SECTI ON 08 71 00 Page 5 storefront. Provide 8 i nch k i ck pl at es f or f l ush door s and 1 i nch l ess t han hei ght of bot t om r ai l f or panel door s.

2. 4 FASTENERS

Pr ovi de f ast ener s of t ype, qual i t y , s i ze, and quant i t y appr opr i at e t o t he speci f i c appl i cat i on. Fast ener f i ni sh t o mat ch har dwar e. Pr ovi de st ai nl ess st eel or nonf er r ous met al f ast ener s i n l ocat i ons exposed t o weat her . Ver i f y met al s i n cont act wi t h one anot her ar e compat i bl e and wi l l avoi d gal vani c cor r osi on when exposed t o weat her .

2. 5 FINISHES

Pr ovi de i n accor dance wi t h ANSI / BHMA A156. 18. Pr ovi de har dwar e i n BHMA 630 f i ni sh ( sat i n st ai nl ess st eel ) , unl ess speci f i ed ot her wi se. Pr ovi de i t ems not manuf act ur ed i n st ai nl ess st eel i n BHMA 626 f i ni sh ( sat i n chr omi um pl at ed) over br ass or br onze, except f i ni sh f or sur f ace door c l oser s, and except BHMA 652 f i ni sh ( sat i n chr omi um pl at ed) f or st eel hi nges. Pr ovi de hi nges f or ext er i or door s i n st ai nl ess st eel wi t h BHMA 630 f i ni sh or chr omi um pl at ed br ass or br onze wi t h BHMA 626 f i ni sh. Fur ni sh exi t devi ces i n BHMA 626 f i ni sh i n l i eu of BHMA 630 f i ni sh except wher e BHMA 630 i s speci f i ed under par agr aph HARDWARE SETS. Mat ch exposed par t s of conceal ed c l oser s t o l ock and door t r i m. Mat ch har dwar e f i ni sh f or al umi num door s t o t he door s.

PART 3 EXECUTI ON

3. 1 INSTALLATION

Pr ovi de har dwar e i n accor dance wi t h manuf act ur er s ' pr i nt ed i nst al l at i on i nst r uct i ons. Fast en har dwar e t o wood sur f aces wi t h f ul l - t hr eaded wood scr ews or sheet met al scr ews. Pr ovi de machi ne scr ews set i n expansi on shi el ds f or f ast eni ng har dwar e t o sol i d concr et e and masonr y sur f aces.

Pr ovi de t oggl e bol t s wher e r equi r ed f or f ast eni ng t o hol l ow cor e const r uct i on. Pr ovi de t hr ough bol t s wher e necessar y f or sat i sf act or y installation.

3. 1. 1 Weat her st r i ppi ng I nst al l at i on

Pr ovi de f ul l cont act , weat her t i ght seal s t hat al l ow oper at i on of door s wi t hout bi ndi ng t he weat her st r i ppi ng.

3. 1. 1. 1 St op Appl i ed Weat her st r i ppi ng

Fast en i n pl ace wi t h col or mat ched sheet met al scr ews not mor e t han 9 i nch on cent er af t er door s and f r ames have been f i ni sh pai nt ed.

3. 1. 2 Thr eshol d I nst al l at i on

Ext end t hr eshol ds t he f ul l wi dt h of t he openi ng and not ch end f or j amb st ops. Set t hr eshol ds i n a f ul l bed of seal ant and anchor t o f l oor wi t h cadmi um- pl at ed, count er sunk, st eel scr ews.

3. 2 FI RE DOORS AND EXI T DOORS

Pr ovi de har dwar e i n accor dance wi t h NFPA 72 f or door al ar ms, NFPA 80 f or f i r e door s, NFPA 101 f or exi t door s, and NFPA 252 f or f i r e t est s of door assemblies.

SECTI ON 08 71 00 Page 6

3. 3 HARDWARE LOCATI ONS

Pr ovi de i n accor dance wi t h SDI / DOOR A250. 8, unl ess i ndi cat ed or speci f i ed otherwise.

a. Ki ck and Ar mor Pl at es: Push si de of s i ngl e- act i ng door s. Bot h s i des of doubl e- act i ng door s.

b. Mop Pl at es: Bot t om f l ush wi t h bot t om of door .

3. 4 FI ELD QUALI TY CONTROL

Af t er i nst al l at i on, pr ot ect har dwar e f r om pai nt , s t ai ns, bl emi shes, and ot her damage unt i l accept ance of wor k. Submi t not i ce of t est i ng 15 days bef or e schedul ed, so t hat t est i ng can be wi t nessed by t he Cont r act i ng Of f i cer . Adj ust hi nges, l ocks, l at ches, bol t s, hol der s, c l oser s, and ot her i t ems t o oper at e pr oper l y. Demonst r at e t hat per manent keys oper at e r espect i ve l ocks, and gi ve keys t o t he Cont r act i ng Of f i cer . Cor r ect , r epai r , and f i ni sh, er r or s i n cut t i ng and f i t t i ng and damage t o adj oi ni ng work.

3. 5 HARDWARE SETS

Provide door har dwar e set s as speci f i ed her ei n and as i ndi cat ed on at t ached Door Har dwar e Schedul e.

1. I n an ef f or t t o st andar di ze al l Mechani cal mor t i se l ocks and Smal l For mat i nt er changeabl e cor es ( SFI C) on McEnt i r e JNGB, and t o f aci l i t at e ease of mai nt enance, t he i t ems l i s t ed bel ow ar e t he r equi r ed door har dwar e mat er i al s t o be speci f i ed f or i nst al l at i on:

Nomencl at ur e Manuf act ur er Model Par t number

Mor t i se Lock Best 45H 45H7UNR3H626

SFI C Best CORMAX 1CM- 7MJ12 626

2. The mor t i se l ock speci f i ed as 45H7UNR3H626 i s a uni ver sal l ockset . Thi s l ockset may be conf i gur ed t o a var i et y of common f unct i ons, as needs change, al l wi t hout openi ng t he l ock case.

- - End of Sect i on - -

SECTI ON 08 71 00 Page 7