W912PF18Q0033-DFAC_Equipment.docx

W912PF18Q0033

Section SF 1449 - CONTINUATION SHEET

FLAT TOP GRILL, STAINLESS STEEL, ELECTRI

FFP

FLAT TOP GRILL, ELECTRIC - Cooking surface in stainless steel: flat with a small splash back on four sides, with hole and a removable fat collection drawer. Uniformity in the temperature distribution guaranteed by fixing the heating elements directly under the plate. Stainless steel heating elements, each one of kW 2, 2 400V3N~ 50Hz, switch and safety thermostat for temperature regulation 66 - 324°, with general indicator light and indicator light for heating elements. Cool-grip knobs of special heat proof material. AISI 304 18/10 stainless steel adjustable legs on casters.

FOB: Destination

PURCHASE REQUEST NUMBER: 0011209932

PSC CD: 7320

NET AMT

MEAT SLICER, G7, ALUMINIUM ALLOY

MEAT SLICER G7, ELECTRIC - GRAVITY SLICING MACHINES, Made of aluminum alloy treated with anodic oxidation, Belt drive. Built-in sharpener, For retail, supermarkets and collective catering, Controls with N.V.R. device, Aluminum knobs, kW 0,38, (HP) 0,50 , 220V 1FtN, 0,37KW FOB: Destination

NET AMT

HOLD HOLDING CABINET (2 Door), ELECTRIC

WARMER-HOT HOLDING CABINET 18 GN 2/1, 2-DOOR, ELECTRIC - Mobil pass-through, castors, capacity for 16 each 18” x 26” line pans, 930Wx880Dx1910H mm, V 230-A / 50/60 HZ / Halo Heat…a controlled, uniform heat source that gently surrounds food for better appearance, taste, and longer holding life.

FOB: Destination

NET AMT

KETTLE, STEAM JACKETED, 25 LT, ELECTRIC

KETTLE, STEAM JACKETED, ELECTRIC, to include table - Electronic control, manual tilting, water level control of the double-jacket, indirect electric heating, 25-Lt, 700Wx480Dx420H mm, support console on right, splash proof. 3N+PE AC 400V /50/60 Hz.

FOB: Destination

NET AMT

COMBI/STEAM OVEN 10GN 2/1 LW, ELECTRIC

AIR-O-CONVECT COMBI OVEN 10GN 2/1, ELECTRIC - Air-O-Convect-steamer W/open base+tray support, air-o-steam with high resolution touch screen control, cooking modes (automatic, recipe-program, manual), air-o-air clima and air-on-clean functions, halogen lighting in cooking chamber, double-glass doors, 16-phase programs 65mm pitch, 1208Wx1065Dx1058H mm, 380-400 V/3N -50/60 Hz, 25 kw.50 FOB: Destination

NET AMT

CONVECTION OVEN 20 GN 2/1 LW, ELECTRIC

AIR-O-CONVECT CONVECTION OVEN 20 GN 2/1 LW, ELECTRIC - Air-o-convect, 20x2/1GN, direct steam and 11 humidity level settings, automatic and manual rapid cooling activation when going from high to low temperatures, trolley rack, 63 mm pitch and door shield, 1243Wx1107Dx1795H, 380-400 V/3N -50/60 Hz, 50kw.

FOB: Destination

NET AMT

ROBOT COUPE W/ACCSSARIES CL52

ROBOT COUPE VEG MACHINE, GN 1/1, CL52, ELECTRIC W/DISKS - Automatic feeder, disks included, 375 RPM, 700Wx359Dx1100H mm, 400 V 50Hz / 3

DISKS #

FOB: Destination

NET AMT

BREAD DISPENSER, 4 COMP, STAINLESS STEEL

BREAD DISPENSER, 4-Compartment - Polished stainless steel, 4’ adjustable legs, Size: 23 ¾”w x 31”d x 31”h, Weight 66 lb FOB: Destination

NET AMT

HEAVY DUTY CART W/CASTERS, HOLD 500KG, S

HEAVY DUTY CARTS - Stainless steel trolleys, brushed finish, Stainless steel 2.5x2.5 cm square tube frame, Steel sheet pressed flat shelves (PL range) or deep tray shelves (PV range) with reinforcing bar, welded to the frame, Grey rubber ring buffers, Swivel castors with support plate and roller bearings, ø 16 cm, 2 with brake. Holds 500Kg.

FOB: Destination

NET AMT

PLATE DISPENSER, W/LID/CASTERS, CHROME

PLATE DISPENSER W/LIDS/CASTERS - 2-Hole Dispenser, Stainless Steel, 44”Wx87.5Dx90.5H / Hole 30,5, Trolley made of chrome nickel steel, 2 removable adjustable tubes, completely made of s/s, in torsion-resistant s/s profile construction, Loading max. 75 kg/tube, Stack height up to tube edge: ca. 600 mm.

Smooth-running platform, safeguarded against tilting and tipping, placed for easy handling.

Platform coated with rilsan, Adjustment of the required plate diameter by means of 3 adjustment rods guided by a grid in a s/s base, rods made of round material, coated with rilsan, Spring power can be adjusted easily by hanging in and out the tension springs on the tube insert which can be removed for that purpose.

FOB: Destination

NET AMT

SOUP BOWL DISPENSER W/LID/CASTERS, CHROM

BOWL (SOUP/CEREAL) DISPENSER W/LID/CASTERS - 2-Hole Dispenser, Stainless Steel, 44”Wx87.5Dx90.5H / Hole 23,5, Trolley made of chrome nickel steel, 2 removable adjustable tubes, completely made of s/s, in torsion-resistant s/s profile construction, Loading max. 75 kg/tube, Stack height up to tube edge: ca. 600 mm.

Smooth-running platform, safeguarded against tilting and tipping, placed for easy handling.

Platform coated with rilsan, Adjustment of the required plate diameter by means of 3 adjustment rods guided by a grid in a s/s base, rods made of round material, coated with rilsan, Spring power can be adjusted easily by hanging in and out the tension springs on the tube insert which can be removed for that purpose.

FOB: Destination

NET AMT

FOOD CUTTER, 18" STAINLESS STEEL BOWL, E

FOOD CUTTER 1 H.P. MOTOR, ELECTRIC - Permanently lubricated ball bearings and totally enclosed within the machine. Single-phase is capacitorstart,induction-run type. Three-phase is polyphase squirrel-cage, induction-run type. Double Cutlery Grade Stainless Steel Knives, one-piece Burnishes Aluminum Housing, 18” stainless steel Bowl rotates at 20 RPM, 3” stainless steel legs, 1725 RPM Knife Rotation, 15 pound Capacity. 230/60/1. See detail Dimensions on specification sheet.

FOB: Destination

NET AMT

ELECTRIC CAN OPENER

ELECTRIC CAN OPENER - 220V

FOB: Destination

NET AMT

BULK MILK DISPENSER /HOLD TWO-20LT CO

MILK DISPENSERS, 2-SPROUTS, ELECTRIC - Stainless Steel, capacity to hold two 20 Lt / 5.3 gal containers, 26.5”Wx17”Dx39.5”H, V 230 / 50/60 HZ / AMP 1.6 / BTU/HR 310 /REFR 134A / 5.75OZ FOB: Destination

NET AMT

TRAY W/5-SILVERWARE DISPENSER W/CASTERS

TRAY DISPENSER W/ 5 SILVERWARE DISPENSER W/CASTERS - Dispenser made of chrome nickel steel, 4 sides, with fold over on long sides.

Load: max. 200 kg, Stack height: ca. 575 mm (up to upper edge of dispenser).

Easy-running platform, guided by 4 axial-radial ball bearing combinations, safeguarded against tilting and tipping, Elevating mechanism made of 3 mm thick stainless steel, Platform suitable for baskets/trays max. 530 x 400 mm, Platform dimensions: 535 x 412 mm, Adjustment of constant dispensing height by hanging in and out the heat resistant tension springs.

On the left, face side s/s carcass, single-walled. Integrated therein an elevating, mechanism for the open stacking platform.

FOB: Destination

NET AMT

CUP/GLASS DISPENSER W/CASTERS, CHROME

CUP/GLASS DISPENSER W/CASTERS - Load: max. 200 kg Stack height: ca. 600 mm.Easy-running rectangular platform, guided by 4 axial-radial ball bearing combinations, safeguarded against tilting and tipping, Platform suitable for stacking of crockery on the platform, Tube shaft dimensions (clearance): 525 x 590 mm, Platform with 36 bore-holes (arranged in pairs), with plastic guides for the exchange rods, for a user-defined subdivision of the platform, With 6 exchange rods (for centering of crockery parts on the platform), placed on the back side of the dispenser in an optional s/s tubular rod holder.

Adjustment of constant dispensing height by hanging in and out the heat resistant tension springs, Carcass single-walled.

FOB: Destination

NET AMT

WATER SOFTNER, T600, 20LT

WATER SOFTNER - 1600 LT/Per Hour, 220V 1FtN, HARD PLASTIC W/ CASTERS FOB: Destination

NET AMT

BIN INGREDIENT HARD PLASTIC W/LID, CAST

BIN INGREDIENT - LT 116, Plastic Bin W/see through Lid W/Casters FOB: Destination

NET AMT

COMBI EAST PLUS 20GN 1/1 LW, ELECTRIC

EASY STEAM PLUS 20 GN 2/1, ELECTRIC - Convection-steamer with a high-resolution touch screen control panel, High temperature steam (max. 130 °C), combination cycle (max. 250 °C): combining convected heat and steam to obtain humidity controlled cooking environment, accelerating the cooking process and reducing weight loss. guided descaling function to guide operator during boiler descaling phase (from "Setting" mode), multitier function to manage a sequence of up to 14 different cooking cycles, improving flexibility and ensuring excellent cooking results. Baking tray with 4 edges, perforated aluminum (400x600x20), 380-400 V/3N ph/50/60 Hz, FOB: Destination

NET AMT

COMBI EASY STEAM PLUS 10GN 1/1, ELECTRIC

EASY STEAM PLUS COMBI 10GN 2/1, ELECTRIC - Steamer W/open base+tray support, air-o-steam with high resolution touch screen control, cooking modes (automatic, recipe-program, manual), air-o-air climax and air-on-clean functions, halogen lighting in cooking chamber, double-glass doors, 16-phase programs 65mm pitch, 1208Wx1065Dx1058H mm, 380-400 V/3N -50/60 Hz, 25 kw.50 FOB: Destination

NET AMT

REFRIGERATOR (3 Door), STAINLESS STEEL, REFRIGERATOR, 3 DOORS REACH-IN, W/CASTORS, GN 2/1, ELECTRIC - 3-Door AISI 304 Grade Stainless Steel interior/exterior, Interior rounded corner, Door locks, Magnetic door gasket of one piece construction, Interior LED Light, Electronic control – Ventilated, H.A.C.C.P, Auto Defrost, Auto Evaporation, Adjustable inox feet, Reversible and Self closing doors, Poliurethane Insulation 60mm CFC/HCFC Free, Cyclopentane Foaming, Stainless Steel Shelfs, Evaporator coil & condenser balanced for low power consumption , Sealed, cast iron, self-lubricating evaporator fan motor(s) and larger fan blades with a more efficient low velocity, high volume airflow design, GasR404a/R134a, Coolers adjustable from -2°C to +8°C (28°F to 46°F), 2100 Lt, 220-240/50 / 600Watt, Dimension cm 216Lx80Dx212H FOB: Destination

NET AMT

REFRIGERATOR (2 Door), STAINLESS STEEL, REFRIGERATOR, 2 DOORS, GN 2/1, ELECTRIC - Two Stainless Steel door fridge W/Castors, Mobil pass-through, 1430 Litri, dimension 1800Wx820Dx2400H mm, 220V /1/50.

FOB: Destination

NET AMT

HOLD HOLDING CABINET (2 Door), ELECTRIC

HOLD HOLDING CABINET (2 Door) - Mobil pass-through, castors, capacity for 16 each 18” x 26” line pans, 930Wx880Dx1910H mm, V230/50/60HZ Halo Heat…a controlled, uniform heat source that gently surrounds food for better appearance, taste, and longer holding life.

FOB: Destination

NET AMT

FOOD CUTTER, 18" STAINLESS STEEL BOWL, E

FOOD CUTTER - Permanently lubricated ball bearings and totally enclosed within the machine. Single-phase is capacitorstart,induction-run type. Three-phase is polyphase squirrel-cage, induction-run type. Double Cutlery Grade Stainless Steel Knives, one-piece Burnishes Aluminum Housing, 18” stainless steel Bowl rotates at 20 RPM, 3” stainless steel legs, 1725 RPM Knife Rotation, 15 pound Capacity. 230/60/1. See detail Dimensions on SPEC sheet FOB: Destination

NET AMT

MIXER W/ HUB, 5LT, STAINLESS STEEL, ELEC

MIXER - 5 LT, ELECTRIC - 304 AISI stainless steel bowl - 5 lt capacity, compact and portable design, asynchronous motor with high start-up torque, variable speed from 20 to 220 rpm (planetary movement), to adjust to the selected tool and mixture hardness, Planetary movement based on self-lubricating gears, eliminating any risk of leaks, Water protected planetary system (IP55 electrical 200-240 V/1N/PH /50/60 Hz/0.45KW / mm 266W/ 416D/487H FOB: Destination

NET AMT

MIXER 60LT, W/ ELECTRIC CONTROLS,

MIXER - 60 LT - Stainless steel spiral kneading hook, Cast aluminum, paddle, 302 AISI stainless steel whisk and Mixing Bowl for 60 Lt, Mechanical speed variator with an electric control, Maximum capacity (flour, with 60% of hydration) 20 kg, suitable for 400-800 meals per service, Waterproof control panel with timer setting knob and speed setting buttons. Safety device will automatically stop the machine if the screen is lifted, Geared motor drive system to raise and lower bowl and bowl lighting. 220-240/380-415 V/3 ph/50 Hz, mm 685W/ 1030D/ 1445H FOB: Destination

NET AMT

MEAT TENDERIZER, ELECTRIC

MEAT TENDERIZER - Anodized aluminum, stainless steel and plastics IAW hygiene regulations to ensure that the machine has a long life, on/off control, pushbuttons, Protection cover, clamping handle, Blades group, clamping handle, Feed intake, protection cover, blades group, Blade scraper comb, blades, Right roll, Left roll, Roll support, Roll clamping lever, reversal control for the rolls rotation. V220-230/W400/50Hz FOB: Destination

NET AMT

ELECTRIC CAN OPENER

ELECTRIC CAN OPENER - 220V

FOB: Destination

NET AMT

SOUP BOWL DISPENSER W/LID/CASTERS, CHROM

BOWL (SOUP/CEREAL) DISPENSER W/LID/CASTERS - 2-Hole Dispenser, Stainless Steel, 44”Wx87.5Dx90.5H / Hole 23,5, Trolley made of chrome nickel steel, 2 removable adjustable tubes, completely made of s/s, in torsion-resistant s/s profile construction, Loading max. 75 kg/tube, Stack height up to tube edge: ca. 600 mm.

Smooth-running platform, safeguarded against tilting and tipping, placed for easy handling.

Platform coated with rilsan, Adjustment of the required plate diameter by means of 3 adjustment rods guided by a grid in a s/s base, rods made of round material, coated with rilsan, Spring power can be adjusted easily by hanging in and out the tension springs on the tube insert which can be removed for that purpose.

FOB: Destination

NET AMT

PLATE DISPENSERS W/LID/CASTER, CHROME

PLATE DISPENSER W/LIDS/CASTERS - 2-Hole Dispenser, Stainless Steel, 44”Wx87.5Dx90.5H, Trolley made of chrome nickel steel, 2 removable adjustable tubes, completely made of s/s, in torsion-resistant s/s profile construction, Loading max. 75 kg/tube, Stack height up to tube edge: ca. 600 mm.

Smooth-running platform, safeguarded against tilting and tipping, placed for easy handling.

Platform coated with rilsan, Adjustment of the required plate diameter by means of 3 adjustment rods guided by a grid in a s/s base, rods made of round material, coated with rilsan, Spring power can be adjusted easily by hanging in and out the tension springs on the tube insert which can be removed for that purpose.

FOB: Destination

NET AMT

HEAVY DUTY CART WCASTERS, HOLD 500KG, ST

HEAVY DUTY FOOD CARTS - Stainless steel trolleys, brushed finish, Stainless steel 2.5x2.5 cm square tube frame, Steel sheet pressed flat shelves (PL range) or deep tray shelves (PV range) with reinforcing bar, welded to the frame, Grey rubber ring buffers, Swivel castors with support plate and roller bearings, ø 16 cm, 2 with brake. Holds 500Kg.

FOB: Destination

NET AMT

BIN INGREDIENT, HARD PLASTIC W/LID, CAST

BIN INGREDIENT - LT 116, Plastic Bin W/see through Lid W/Casters FOB: Destination

NET AMT

TRAY W/ 5-SILVERWARE DISEPENSER W/CASTER

TRAY DISPENSER W/ 5 SILVERWARE DISPENSER W/CASTERS - Dispenser made of chrome nickel steel, 4 sides, with fold over on long sides.

Load: max. 200 kg, Stack height: ca. 575 mm (up to upper edge of dispenser).

Easy-running platform, guided by 4 axial-radial ball bearing combinations, safeguarded against tilting and tipping, Elevating mechanism made of 3 mm thick stainless steel, Platform suitable for baskets/trays max. 530 x 400 mm, Platform dimensions: 535 x 412 mm, Adjustment of constant dispensing height by hanging in and out the heat resistant tension springs.

On the left face side s/s carcass, single-walled. Integrated therein an elevating, mechanism for the open stacking platform.

FOB: Destination

NET AMT

CUP/GLASS DISPENSER W/CASTER, CHROME

CUP/GLASS DISPENSER - Load max. 200 kg,Stack height: ca. 600 mm.Easy-running rectangular platform, guided by 4 axial-radial ball bearing combinations, safeguarded against tilting and tipping, Platform suitable for stacking of crockery on the platform, Tube shaft dimensions (clearance): 525 x 590 mm, Platform with 36 bore-holes (arranged in pairs), with plastic guides for the exchange rods, for a user-defined subdivision of the platform, With 6 exchange rods (for centering of crockery parts on the platform), placed on the back side of the dispenser in an optional s/s tubular rod holder.

Adjustment of constant dispensing height by hanging in and out the heat resistant tension springs, Carcass single-walled.

FOB: Destination

NET AMT

BULK MILK DISPENSER / HOLD TWO-20LT CO

MILK DISPENSERS, 2-SPROUTS, ELECTRIC - Stainless Steel, capacity to hold two 20 Lt / 5.3 gal containers, 26.5”Wx17”Dx39.5”H V 230 / 50/60 HZ / AMP 1.6 / BTU/HR 310 /REFR 134A / 5.75OZ FOB: Destination

NET AMT

WATER SOFTNER , CL54, 20LT

WATER SOFTNER - 1600 LT/Per Hour, 220V 1FtN / HARD PLASTIC W/CASTERS FOB: Destination

NET AMT

BREAD DEPENSER, 4 COMP, STAINLESS STEEL

BREAD DISPENSER, 4-Compartment - Polished stainless steel, 4’ adjustable legs, Size: 23 ¾”w x 31”d x 31”h, Weight 66 lb FOB: Destination

NET AMT

DELIVERY/INSTAL(NEW EQ) DISAS. REMOV(OLD

DELIVERY AND INSTALLATION (NEW EQUIPMENT) DISASSEMBLE AND REMOVE (OLD EQUIPMENT) LOCATIONS: EDERLE CURRY (Bldg. 10) and Del Din (Bldg. B20). See PWS attached.

FOB: Destination

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

JAMES BROOKS

VIALE DELLA PACE

CASERMA EDERLE, BLDG 10

VICENZA 36100

39 0444-71-6893 FOB: Destination

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

W90JSG

CLAUSES INCORPORATED BY REFERENCE

ADDENDUM TO 52.212-4

The following shall apply to this contract in addition to those terms and conditions in FAR 52.212-4.

1. The following clauses are added to this contract:

CLAUSES INCORPORATED BY FULL TEXT

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/

(End of clause)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause-

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract line, subline, or exhibit line item No. Item description See schedule

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract line, subline, or exhibit line item No. Item description

(If items are identified in the Schedule, insert ``See Schedule'' in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or

(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

252.225-7041 CORRESPONDENCE IN ENGLISH (JUNE 1997)

The Contractor shall ensure that all contract correspondence that is addressed to the United States Government is submitted in English or with an English translation.

252.225-7043 ANTITERRORISM/FORCE PROTECTION POLICY FOR DEFENSE CONTRACTORS OUTSIDE THE UNITED STATES (JUN 2015)

(a) Definition. United States, as used in this clause, means, the 50 States, the District of Columbia, and outlying areas.

(b) Except as provided in paragraph (c) of this clause, the Contractor and its subcontractors, if performing or traveling outside the United States under this contract, shall--

(1) Affiliate with the Overseas Security Advisory Council, if the Contractor or subcontractor is a U.S. entity;

(2) Ensure that Contractor and subcontractor personnel who are U.S. nationals and are in-country on a non-transitory basis, register with the U.S. Embassy, and that Contractor and subcontractor personnel who are third country nationals comply with any security related requirements of the Embassy of their nationality;

(3) Provide, to Contractor and subcontractor personnel, antiterrorism/force protection awareness information commensurate with that which the Department of Defense (DoD) provides to its military and civilian personnel and their families, to the extent such information can be made available prior to travel outside the United States; and

(4) Obtain and comply with the most current antiterrorism/force protection guidance for Contractor and subcontractor personnel.

(c) The requirements of this clause do not apply to any subcontractor that is--

(1) A foreign government;

(2) A representative of a foreign government; or

(3) A foreign corporation wholly owned by a foreign government.

(d) Information and guidance pertaining to DoD antiterrorism/force protection can be obtained from HQDA-AT; telephone, DSN 222-9832 or commercial (703) 692-9832.

252.229-7001 TAX RELIEF (SEPT 2014)

(a) Prices set forth in this contract are exclusive of all taxes and duties from which the United States Government is exempt by virtue of tax agreements between the United States Government and the Contractor's government. The following taxes or duties have been excluded from the contract price:

NAME OF TAX: IVA RATE (PERCENTAGE): 22%

(b) The Contractor's invoice shall list separately the gross price, amount of tax deducted, and net price charged.

(c) When items manufactured to United States Government specifications are being acquired, the Contractor shall identify the materials or components intended to be imported in order to ensure that relief from import duties is obtained. If the Contractor intends to use imported products from inventories on hand, the price of which includes a factor for import duties, the Contractor shall ensure the United States Government's exemption from these taxes. The Contractor may obtain a refund of the import duties from its government or request the duty-free import of an amount of supplies or components corresponding to that used from inventory for this contract.

252.229-7003 TAX EXEMPTIONS (ITALY) (MAR 2012)

(a) As the Contractor represented in its offer, the contract price, including the prices in subcontracts awarded under this contract, does not include taxes from which the United States Government is exempt.

(b) The United States Government is exempt from payment of Imposta Valore Aggiunto (IVA) tax in accordance with Article 72 of the IVA implementing decree on all supplies and services sold to United States Military Commands in Italy.

(1) The Contractor shall include the following information on invoices submitted to the United States Government:

(i) The contract number.

(ii) The IVA tax exemption claimed pursuant to Article 72 of Decree Law 633, dated October 26, 1972.

(iii) The following fiscal code(s): 80028250241

(2)(i) Upon receipt of the invoice, the paying office will include the following certification on one copy of the invoice:

“I certify that this invoice is true and correct and reflects expenditures made in Italy for the Common Defense by the United States Government pursuant to international agreements. The amount to be paid does not include the IVA tax, because this transaction is not subject to the tax in accordance with Article 72 of Decree Law 633, dated October 26, 1972.” An authorized United States Government official will sign the copy of the invoice containing this certification.

(ii) The paying office will return the certified copy together with payment to the Contractor. The payment will not include the amount of the IVA tax.

(iii) The Contractor shall retain the certified copy to substantiate non-payment of the IVA tax.

(3) The Contractor may address questions regarding the IVA tax to the Ministry of Finance, IVA Office, Rome (06) 520741.

(c) In addition to the IVA tax, purchases by the United States Forces in Italy are exempt from the following taxes:

(1) Imposta di Fabbricazione (Production Tax for Petroleum Products).

(2) Imposta di Consumo (Consumption Tax for Electrical Power).

(3) Dazi Doganali (Customs Duties).

(4) Tassa di Sbarco e d'Imbarco sulle Merci Transportate per Via Aerea e per Via Maritima (Port Fees).

(5) Tassa de Circolazione sui Veicoli (Vehicle Circulation Tax).

(6) Imposta di Registro (Registration Tax).

(7) Imposta di Bollo (Stamp Tax).

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

COMBO invoice type

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

FOB: Destination

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

WAWF Acceptor: James Brooks: james.brooks17.civ@mail.mil Alt WAWF Acceptor: Morgana Novi: morgana.novi2.ln@mail.mil Contract Specialist (View Only): Ana Rios: ana.r.rios.civ@mail.mil

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

USARMY.VICENZA.266-FMC.MBX.266FMC-IFO-CVS-WAWF-OFFICIAL@MAIL.MIL

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

252.233-7001 CHOICE OF LAW (OVERSEAS) (JUNE 1997)

This contract shall be construed and interpreted in accordance with the substantive laws of the United States of America. By the execution of this contract, the Contractor expressly agrees to waive any rights to invoke the jurisdiction of local national courts where this contract is performed and agrees to accept the exclusive jurisdiction of the United States Armed Services Board of Contract Appeals and the United States Court of Federal Claims for hearing and determination of any and all disputes that may arise under the Disputes clause of this contract.

END OF ADDENDUM TO 52.212-4

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JAN 2018)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub.