Questions-Answers-W912PF18Q0033-20180818.docx

RFQ W912PF-18-Q-0033 – DFAC Equipment

And RFQ page 14 of 64: CLIN 0023

Description reads: Hold Holding Cabinet (2 door), electric.

Please clarity.

Description should be: “Hot” Holding Cabinet (2 door), electric

And RFQ page 14 of 64: CLIN 0023 Holding Cabinets

The Specifications show four half high doors. 2 on each side.

Is this what is required? Please clarify.

Yes, the requirement is for 2 half-doors on both sides known as a “pass-through” unit where you can add and remove pans from either side of the warmer.

And RFQ page 14 of 64: CLIN 0023 Holding Cabinets

The solicitation requires a WARMER-HOT HOLDING CABINET 18 GN 2/1 pass through with capacity for 16 each 18”x26” line pans. The technical sheet requires a 8 GN 1/1 line pans.

Please clarify what is required.

The requirement is for Universal racks that are designed to accommodate GN1/1 8 standard full-size pans or full size sheet pans.

GN 1/1: 530mm x 325mm x 65mm GN 1/1: 530mm x 325mm x 100mm GN 1/1: 530mm x 325mm x 150mm Full Size Sheet Pans: 18”x26”x1”

COMBI/STEAM OVEN 10GN 2/1 LW, ELECTRIC

The extended description in the CLIN does not match the Technical Specification.

The description under the CLIN states it is an air-o-convect oven (direct steam, without boiler) while the Technical Specification/Data sheet states it’s an air-o-steam touch line oven (with boiler). Please clarify.

Should be (with boiler) as specification data sheet states.

ROBOT COUPE W/ACCESSARIES CL52

Accessories were not included. Please clarify.

FETTE (2 mm), cod. 60.28063 FETTE (5 mm), cod. 60.28065 JULIENNE (3 mm), cod.60.28058 CUBETTI GRIGLIA+FETTE, cod. 60.28113 (14x14x14 mm) CUBETTI GRIGLIA+FETTE, cod. 60.28114 (20x20x20 mm) (See attachment Accessories highlighted in Blue)

And RFQ page 18 of 64: CLIN 0031

HEAVY DUTY CART W/CASTERS, HOLD 500KG, S

What is the length of this item?

Length should be at least 36in. width 24 in.

And RFQ page 18 of 64: CLIN 0031

HEAVY DUTY CART W/CASTERS, HOLD 500KG,

Is the requirement for a Heavy duty cart with one platform or with two?

Normally you can find a cart with 500 kg support if it has one platform. The one with two platforms can normally only hold 260 kg. Please clarify what is the requirement/acceptable.

The requirement is for two platforms with a grand total of 500 kg support.

And RFQ page 16 of 64: CLIN 0028 Can opener, electric.

What is the usage per day?

The requested model has a working time of 5 min than 10 min rest time and so on.

Is this sufficient? What is your minimal requirement?

USAGE: Approximately 4 to 5 hours a day.

Minimal Requirement:

Work Time: 10-15 minutes Rest Time: 5-10 minutes

And RFQ page 19 of 64: CLIN 0033

TRAY W/ 5-SILVERWARE DISEPENSER W/CASTER

Description states that Tray Dispenser has 5 casters but item had 8 at the site visit. Please clarify.

The requirement is for TRAY W/ 8-SILVERWARE DISEPENSER W/casters as showed at the site visit.

And RFQ page 19 of 64: CLIN 0033

TRAY W/ 5-SILVERWARE DISEPENSER W/CASTER

It seems that description specified can only be equipped with a 4 compartment silverware dispenser. The specified model is for automatic loading tray behind a conveyer or the dishwasher.

Please clarify.

The requirement is for TRAY W/8-Silverware dispensers W/casters as showed at the site visit.

The specified model provided was the tray dispenser without the silverware holders.

(See attached photo as seen in the dining facility. This is the item that is needed)

The Description states: “COMBI EAST PLUS 20GN 1/1 LW, ELECTRIC” The extended Description states: “EASY STEAM PLUS 20 GN 2/1, ELECTRIC - Convection-steamer with a high resolution touch screen control panel…” Please clarify if the requirement is for the 20 x GN 1/1 or GN 2/1.

GN 2/1

The Description states: “COMBI EASY STEAM PLUS 10GN 1/1, ELECTRIC” The extended Description states: “EASY STEAM PLUS COMBI 10GN 2/1, ELECTRIC - Steamer W/open base+tray support, air-o-steam with…” Please clarify if the requirement is for the 20 x GN 1/1 or GN 2/1.

GN 2/1

REFRIGERATOR (2 Door), STAINLESS STEEL

The Specifications show the refrigerator as reach-in and not pass-through.

Please clarify the type required.

The REFRIGERATOR is a Reach-IN.

MIXER 60LT, W/ ELECTRIC CONTROLS

Is the requirement with hub or without?

With Hub