W912P821R0011 Amendment 0001.pdf

W912P821R0011

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The above numbered solicitation for Surface Preparation and Painiting Aboard w ith Dredge Wheeler is amended to add Attachment A (Statement of Work), Attachement B (Qualitiy Assurance Surveillence Plan), and Attachement C (Wage Determinations) to the combined synopsis/solicitation that w ere inadvertenly left out.

Site visit, Offeror question submission, and proposal response dates and times remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 50

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 21-May-2021

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912P821R0011

X 9B. DATED (SEE ITEM 11)

10-May-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

21-May-2021

CODE

USACE, CONTRACTING DIVISION

ATTN: CEMVN-CT, ROOM 172

7400 LEAKE AVE.

NEW ORLEANS LA 70118-3651

W912P8 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

AMENDMENT 0001

ATTACHMENT #1

PERFORMANCE WORK STATEMENT

SURFACE PREPARATION AND PAINTING

ABOARD THE DREDGE WHEELER

C-1. GENERAL INFORMATION

1.1 The U.S. Army Corps of Engineers, New Orleans District has a requirement for surface preparation and painting aboard the Dredge Wheeler and the 44ft long launch. The contractor shall provide all necessary labor, supervision, tools, equipment, ventilation, paint, materials, and supplies to perform cleaning and surface preparation, priming and painting of interior and exterior aboard the US Dredge WHEELER and the 44 ft long aluminum launch, as described in the following paragraphs.

1.2 The Dredge WHEELER is an all-steel, sea-going large class hopper dredge. The hull dimensions are as follows:

Length Overall 408 ft. – 3 in.

Length B.P. 384 ft. – 0 in.

Breadth Molded 78 ft. – 0 in.

Breadth at Wheelhouse Catwalks 82 ft. – 0 in.

The M/V LAUNCH WHEELER is a 44 ft long, aluminum hull, motor powered vessel.

1.3 WORK SITE. All work will be performed while the dredge and launch are moored at the US Army Corps of Engineers, New Orleans District wharf (mile 103.5 AHP, Mississippi River;

7400 Leake Ave., New Orleans, LA 70118).

1.4 PRE-PROPOSAL SITE VISIT- For proposal purposes, prospective offerors are encouraged to attend the site visit on 10:00am, Monday, 24 May 2021 at the New Orleans District Headquarters. Address: 7400 Leake Avenue, New Orleans, LA 70118. To attend the site visit, you must be vetted with Security. To get your name on the site visit attendees list, please contact Noelle Belhumeur at (504) 862-1953 no later than 2:00pm, Thursday, 20 May 2021.

1.5 PARKING - Temporary parking passes, shall be issued to the Contractor's vehicles for the duration of the contract. The contractor is subject to all Government regulations and requirements regarding the operation of a motor vehicle on a Government installation. NOTE:

there shall be no parking on the district wharf, with the exception of loading/off-loading of equipment.

1.5.1 Due to space constraints, only a limited number of vehicular passes will be authorized by the District's Safety, Security, and Occupational Health Office. No private vehicles and no over-night parking will be allowed. Posted speed limits will be enforced. The Contractor should consider a mobilization point, for pooling purposes, or possibly bussing employees to the job site. Only previously approved company identified vehicles and pedestrians, possessing company identification will be granted access to this Army Reservation. (NOTE: Pedestrian crossing at either entrance to this reservation is not posted or policed and is therefore considered dangerous.)

1.5.2 Access to District offices will be authorized for official business purposes, including cafeteria services. Precautions should be taken to protect Government facilities from the effects of greasy or dirty clothing. No roaming of the reservation grounds, buildings, or offices will be allowed.

1.6 DISTRICT SECURITY - Upon contract award, the contractor shall provide a detailed and complete listing of all individuals and vehicular access requirements. This listing must be updated as required by the Security Office.

1.6.1 All Contractor employees (U.S. citizens and Non- U.S. citizens) working under this contract (to include grants, cooperative agreements and task orders) who require access to Automated Information Systems (AIS), (standalone computers, network computers/systems, e-mail) shall, at a minimum, be designated into an ADP-III position (non-sensitive) in accordance with DoD 5220-22-R, Industrial Security Regulation. The investigative requirements for an ADP-III position are a favorable National Agency Check (NAC), SF-85P, Public Trust Position.

The contractor shall have each applicable employee complete a SF-85P and submit to the USACE, New Orleans District, P. O. Box 60267, New Orleans, LA 70160-0267, Security Officer within three (3) working days after award of any contract or task order, and shall be submitted prior to the individual being permitted access to an AIS. Contractors that have a commercial or government entity (CAGE) Code and Facility Security Clearance through the Defense Security Service shall process the NACs and forward visit requests/results of NAC to the USACE, New Orleans District, P. O. Box 60267, New Orleans, LA 70160-0267, Security Officer. For those contractors that do not have a CAGE Code or Facility Security Clearance, the USACE, New Orleans District, P. O. Box 60267, New Orleans, LA 70160-026, Security Office will process the investigation in coordination with the Contractor and contract employees.

1.6.2 In accordance with Engineering Regulation, ER 380-1-18, Section 4, foreign nationals who work on Corps of Engineers' contracts or task orders shall be approved by the HQUSACE Foreign Disclosure Officer or higher before beginning work on the contract/task order. This regulation includes subcontractor employees. (NOTE: exceptions to the above requirement include foreign nationals who perform janitorial and/or ground maintenance services.) The contractor shall submit to the Division/District Contract Office, the names of all foreign nationals proposed for performance under this contract/task order, along with documentation to verify that he/she was legally admitted into the United States and has authority to work and/or go to school in the US. Such documentation may include a US passport, Certificate of US citizenship (INS Form N-560 or N-561), Certificate of Naturalization (INS Form N-550 or N- 570), foreign passport with I-551 stamp or attached INS Form I-94 indicating employment authorization, Alien Registration Receipt Card with photograph (INS Form I-151 or I-551), Temporary Resident Card (INS Form I-688), Employment Authorization Card (INS Form I- 688A), Reentry Permit (INS Form I-327), Refugee Travel Document (INS Form I-571), Employment Authorization Document issued by the INS which contains a photograph (INS Form I-688B). Classified contracts require the issuance of a DD Form 254 (Department of Defense Contract Security Classification Specification).

1.7 RECEIVING - Deliveries for Contractor required supplies and equipment will be accepted at N.O.D. warehouse located at 7400 Leake Ave, New Orleans, LA 70118-3651 or at the field location of the vessel. Prior notification of expected shipment information is required.

1.8 NON-SMOKING AREAS - In conjunction with department of the Army policy, all interior spaces on the Dredge WHEELER have been designated NON-SMOKING AREAS.

Smoking will be allowed on exterior decks only, if the ship is not taking on flammable substances (fuel oil, lube oil, etc.).

1.9 CHANGES - No changes will be made to this solicitation or the resulting contract unless it is made, in writing, by the Contracting Officer. Changes made by any other direction will be made at the Contractor's own risk.

C-2. SPECIFIC TASKS

2.1 Provide the services of the craftsmen listed in Section B, to perform the surface preparation and painting aboard the U.S. Dredge WHEELER.

2.2 PERIOD OF PERFORMANCE. These services will usually be required during the year while the vessel is not working. Below is an estimated annual planned work schedule for the Dredge Wheeler:

* 4 October – 11 October

* 24 April – 24 April

* 18 May – 14 June

* 29 June – 12 July

* 20 July – 19 Aug

* 17 September – 30 September

Note: This schedule is subjected to change. Also, the dredge Wheeler may be required to work during any time other than regular planned schedule.

2.3 SPACE/AREAS TO BE CLEANED AND PAINTED. The areas to be cleaned and painted will be described in each specific Task Order. The Contractor will inspect the site prior to each task order and familiarize himself with all aspects of the job, to minimize any problems relative to estimation and accomplishment of work.

2.4 SURFACE PREPARATION. All steel surfaces shall be cleaned and prepared for painting in accordance with the applicable “Surface Preparation Specifications” published by the Steel Structures Painting Council, as specified in each Task Order, generally from the following list:

a) Surface Preparation Specification No. 1 -- Solvent Cleaning; SSPC-SP1

b) Surface Preparation Specification No. 2 -- Hand Tool Cleaning; SSPC-SP2

c) Surface Preparation Specification No. 3 -- Power Tool Cleaning; SSPC-SP3

d) Surface Preparation Specification No. 11 -- Power Tool Cleaning to White Metal; SSPC-

SP11

e) Ultra-High Pressure Water Blasting, NACE No 5/SSPC-SP-12 -- WJ-4 or better.

NOTE: There shall be no abrasive blast cleaning allowed on the vessel. Abrasive blast cleaning may be specified for certain items that can be removed from the ship to the Contractor’s facility.

The Contractor will take all precautions to screen off the areas where work is to be performed and protect these areas from contamination of oil, grease, and dredging materials. All surfaces shall be primed as soon as practicable after cleaning, but in any event prior to any contamination or deterioration of the prepared surfaces. All edges of cleaned areas adjoining existing paint must be “feathered” (i.e. sand, grind, or water blast to form a gradual slope from bare metal up to the height of existing paint).

2.5 PROTECTION. All grease fittings will be masked to prevent contamination with paint, dirt, etc. Any windows and light lenses in the work area must be cleaned and masked, before any surface preparation, water blasting, or painting takes place. After all painting and cleaning work is completed, remove all masking tape and other protective materials as soon as possible.

All glass shall be cleaned with a mild detergent and water mixture. All tape, glue, overspray, and paint drippings must be completely removed. Protect all machinery, flame arrestor screens or tank vent openings, plagues and label plates. Protect all adjacent spaces and lower areas from drips, splatter, and overspray. Any area which is not adequately protected, will be cleaned, touched up, or repainted as directed by the Government Inspector. Temporary label plates shall be made or other adequate means for ensuring existing stencils are documented, so that they may be reapplied after painting. All maskings must be approved by the Government Inspector prior to commencement of painting work. (Note: The contractor shall be responsible and replace/repair all damages caused by his work or negligence).

2.6 PROTECTION DURING WATER BLASTING. Nonmetallic surfaces such as wood, rubber, glass, plastic, etc., will be protected from direct or indirect water streams. Metallic surfaces such as hydraulic cylinder piston rods shall be wrapped with plastic to prevent damage from water streams. All electrical wirings, junction boxes, switches, and motors shall be covered and sealed to prevent damage by the entrance of water. Transducer heads and other hull appendages shall be protected with covers. Mechanical glands which contain seals shall be protected by covering with plastic. (Note: The contractor shall be responsible and replace/repair all damages caused by his work, water blasting or negligence).

2.7 PAINTING. All areas cleaned and prepared in accordance with the preceding paragraphs will be painted in accordance with Painting Schedule, ASI Drawing No. 19-01-01 or Government approved equal. Submit to the Government proposed coating system for approval (which includes top coat color) prior to any work.

All paint required, shall be Contractor furnished. Paint shall be delivered to the work-site in original sealed five gallon containers. Recommended paint manufacturers are Sigma, Hempel, and International. Note: once a paint brand is picked and approved, the Contractor shall continue to use this brand and formula and not mix brands/formulas, respectively. Each paint container shall contain the name of the manufacturer, name of the paint, formula of paint, batch number, and date of manufacture. All paint shall have been manufactured within one year of the date of application. The paint shall be thoroughly mixed by mechanical paint shaker or another approved means, prior to the application of paint. Paint thinners shall not be used to cure or thin paint. The paint shall be continually agitated while in the paint containers or pressure pots.

All painting shall be done in a workmanlike manner and the finished coatings shall be free of holidays, pinholes, bubbles, runs, drops, ridges, laps and variations in color, texture and gloss.

All coats shall be applied in such a manner as to produce an even film of uniform thickness.

Edges, corners, seams, joints, welds, rivets, and surface irregularities shall receive special attention to insure an adequate thickness of paint. Generally, external paint shall be applied by roller or brush. No spray painting shall be allowed on the vessel’s exterior while it is located at the Corps of Engineers wharf in New Orleans, LA. Under no circumstances will there be any exterior painting of any kind while it is raining, snowing, sleeting, fog or after daylight hours. There will also be no exterior painting of any kind when the ambient air temperature is below 45 degrees F or when the steel surface is less than 5 degrees F above the dew point. On days when these conditions are questionable, the decision to paint must be approved by the Government Inspector before commencement of painting operations.

No paint shall be applied until surfaces to be coated are cleaned, inspected by the Government and approved for application of priming coats and each additional coat. All machinery equipment, flame arrestor screens on tank vent openings, or plaques in way of or adjacent to any cleaning and painting operations shall be adequately protected. When applying paints as specified herein, provisions shall be made to protect all adjacent and lower areas against paint splatter and drips. Any area which is not adequately protected shall be retouched or completely repainted, as directed by the Government Inspector, at no additional cost to the Government.

Any glass or normally unpainted surfaces which receive overspray, drips, or splatters will be thoroughly cleaned.

Paint applied under condition other than those listed herein will be rejected. Paint shall be applied to the minimum dry film thickness as specified in the painting schedule or the Task Order. All paint thickness shall be measured using Contractor-furnished instrument similar or equal to the approved instruments specified in Military Specification MIL-F-3846 Rev C (ME).

C-3. REQUIREMENTS / PERFORMANCE STANDARDS

3.1 REQUIREMENTS

3.1.1 QUALIFICATION. Prospective bidders must be registered as qualified HUBZone small business (see referenced FAR Clause 52.219-4). Proof of HUBZone certification shall be required when submitting bid. Prospective bidders must be qualified to perform marine coating application and must have an office and shop facility within 150 driving miles radius from the Corps of Engineers, New Orleans district in New Orleans.

3.1.2 WORKMANSHIP. All work will be performed without delays in an efficient and workmanlike manner by personnel who are thoroughly trained and familiar with the types of work being performed, and who possess the necessary experience to properly perform the cleaning, priming and painting in accordance with these specifications. Any defects in workmanship or Contractor-furnished materials shall be corrected at no expense to the Government.

3.1.3 DAILY FIELD SERVICE REPORTS. For all work performed aboard the vessel, submit a daily field service report that lists the names of the supervisor, painters, and painter helpers (laborers), the actual hours worked, the times of arrival and departure from the vessel, a description of the work accomplished that day, and a list of the materials required to accomplish the work. The hours worked shall be supported by daily time sheets or cards if requested by the Government.

3.1.4 GENERAL INSPECTION, QUALITY CONTROL, AND QUALITY ASSURANCE.

All work and materials supplied under this contract shall be subject to timely inspection during all phases of the work. As previously stated, prepared surfaces shall be inspected by the Government prior to the application of coating. The work will be inspected, during and after each phase of the cleaning, priming, and painting. Provide Quality Control inspection prior to the Government’s Quality Assurance inspection. Advise the Government at least 24 hours in advance the work is ready to be inspected. The Contractor shall document inspection and submit reports to the Government Inspector.

3.1.5 SURFACE PREPARATION AND PAINTING EQUIPMENT. The Contractor shall supply all labor, equipment and materials needed to perform the work statement in Section C-2 (Specific Tasks) in a timely manner. This includes, but is not limited to air compressor, power grinder, needle guns, power chippers, cleaning hand tools, rollers, brushes, etc...

3.1.6 SCAFFOLDING. Provide all scaffolding, planking, rigging, manlift, and ropes, through subcontractor if necessary to accomplish the work in all task orders. All such equipment shall meet the requirements of the US Army Corps of Engineers Safety Manual, EM-385-1-1.

3.1.7 ULTRA-HIGH PRESSURE WATER BLASTING MACHINERY. When required by Task Order, the Contractor shall provide machinery capable of steel surface preparation utilizing a minimum water jet pressure of 25,000 p.s.i. The machinery will be charged on a per day basis for actual days in use at the job site, at the rate quoted in Section B. One additional day’s rental will be allowed for round trip transportation for each Task Order where the machinery is specified. The transportation carrier cost shall be included in the daily rental rate. Water blasting machinery will be used for one ten-hour shift per day.

3.1.8 DISPOSAL OF DEBRIS AND SALVAGE MATERIAL. Prior to any work, the contractor shall take precautions and provide means (vacuum crawlers, equipment, fine mesh nets, plastic tarps, etc.) to contain all debris, paint chips, and waste water resulting from high pressure water blast to keep them from falling into and contaminate the river and hopper water.

The Contractor shall be responsible for removing from the vessel and disposing all paint scrapings, paint chips, debris, empty or partially filled paint, paint thinner cans, any chemicals, and blast water generated during the surface preparation and painting process. The contractor shall be responsible to remove and dispose of all above mentioned waste offsite (off Corps of Engineers district) at no additional cost to the government. The method of disposal shall be in accordance with EPA, state, and local regulations. The Dredge Wheeler has no known Lead based coatings. No Lead based paint shall be applied.

The Contractor shall at all times keep the work site free from accumulation of waste material caused by the Contractor's employees and performance of work in connection with this contract.

At the completion of the work, unless the task order specifies otherwise, the Contractor shall remove all waste from the work site on the ship, and leave the immediate vicinity of the work "broom clean". Note: The government trash dumpsters within the Corps of Engineers New Orleans district shall only be used to dispose of consumer and normal office trashes, such as, food containers, papers, woods, non-contaminated rags and hand tools.

3.1.9 PAYMENT. For each completed Task Order, the Contractor will be paid for the actual straight time and overtime hours worked at the job site, using the hourly rates quoted in Section B. (Note: All overtime work must be approved by the government prior to starting any work).

The cost of all supplies and materials, including painting equipment, protective coverings and personnel safety equipment (with the exception of water blasting equipment) will be included as a factor in the labor rates quoted in Section B. Labor rates shall also include transportation costs, as these are not separate bid line items.

Paint, thinners, degreasers, and non-skid additives shall be supplied under the corresponding line item in Section B. The unit price shall be multiplied by the contractor’s bid for mark-up over cost to obtain the amount given (see Section B).

When required by Task Order, ventilation equipment shall be furnished on a per-day basis under the corresponding line item in Section B. A 480 volts, 3 phase power source shall be supplied by the vessel from within the work area. Ventilation fans, ducting, and power cord are to be supplied by the contractor.

The water blasting machinery shall be quoted as a separate line item in Section B. The operator for this machinery shall be charged under the contract line item for “Helper/Laborer.”

Overtime shall be paid for actual hours of work in excess of 40 hours in a work week. For this contract, a work week begins on Monday and ends on Sunday.

3.2 ACCIDENT PREVENTION PROGRAMS

3.2.1 SAFETY REQUIREMENTS - All work performed under this contract shall be in accordance with the requirements of the U.S. Army Corps of Engineers Safety Manual - EM 385-1-1, and other safety requirements specified herein.

3.2.2 All contractors working for the Corps of Engineers must have a designated Site Safety and Health Officer who has completed a 10-hour OSHA safety course. This training, which is free to the public at web site http://www.mvn.usace.army.mil/ss/osha600/s600/, fulfills the mandatory training requirement.

3.2.3 ACCIDENT PREVENTION PROGRAM – After award, but no later than the pre-work conference, four copies of the Accident Prevention Program shall be submitted to the Contracting Officer for review and approval. The program shall be prepared in the following format (see appendices for forms):

3.2.3.1 Accident Prevention Plan Checklist – Administrative Section LMN Form 385-7-R

3.2.3.2 Accident Prevention Program – Administrative Plan LMN Form 385-43R

3.2.3.3 Accident Prevention Program – Hazard Analysis LMN Form 385-6-R

3.2.3.4 A copy of company policy statement of accident prevention, and any other guidance statements normally provided new employees.

3.2.4 ACCIDENT INVESTIGATIONS AND REPORTING - Refer to EM 385-1-1, Paragraph 1.D.01. Accidents shall be investigated by the immediate supervisor of the employee(s) involved and reported to the Contracting Officer within one working day after accident occurs. A report of all mishaps occurring on the project shall be submitted to the Contracting Officer within four calendar days following the incident. All data reported must be complete, timely, and accurate.

A follow up report shall be submitted when the estimated lost time days differs from actual lost time days.

3.2.5 CONTROL OF HAZARDOUS ENERGY (LOCKOUT/TAGOUT) - The Army's lockout/tag out program, as specified in the EM-385-1-1, shall be followed in addition to the requirements in the following paragraph and the Dredge WHEELER's program, see attachments.

3.2.6 SUPPLEMENT TO EM-385-1-1, PARAGRAPH 12.A.01 - Before an individual performs any servicing, maintenance or construction on a system where the unexpected energizing, start up, or release of kinetic or stored energy could occur and cause injury or damage, the system shall be isolated in accordance with the requirements of this section. In the case where the potential to cause injury or damage does not exist until some point after a system is already in the process of being serviced, maintained or constructed, the system shall be isolated in accordance with the requirements of this section prior to the development of the hazardous potential or as soon as the hazard becomes known, if it could not have been anticipated.

3.3 INSURANCE - The Contractor shall procure, submit evidence of, and maintain throughout the entire period of performance under this contract, the following minimum level of insurance:

3.3.1 Worker's Compensation and Employer's Liability Insurance. The Contractor shall comply with all applicable worker's compensation statutes of the State of Louisiana, and shall furnish evidence of the Employer's Liability Insurance in the amount of not less than $100,000.

3.3.2 General Liability Insurance. Bodily injury liability insurance in limits of $500,000 per occurrence on the comprehensive form of policy.

3.3.3 Automobile Liability Insurance. Minimum limits of $200,000 per person and $500,000 per occurrence for bodily injury and $20,000 per occurrence for property damage. All vehicles to be used in the performance of this contract shall be expressly designated in the insurance policy. A copy of the list of such vehicles shall be submitted to the Contracting Officer. In the event that the Contractor acquires a new vehicle for use on this contract after his insurance policy has been obtained, he shall immediately amend his policy to reflect the inclusion of the new vehicle on the policy.

3.3.4 The Contractor shall submit all required insurance documentation by no later than seven calendar days after receipt of Notice of Award.

3.3.5 LICENSES AND PERMITS- The Contractor shall, without additional expense to the Government, be responsible for obtaining any and all necessary licenses and permits, and for complying with any applicable Federal, State and Municipal Laws, codes and regulations applicable to the performance of the work.

3.4 PERFORMANCE STANDARDS

3.4.1 Performance based deliverables are described in Table 3.4.1, provided below, along with the associated performance standard and the method of monitoring performance. All work performed shall be monitored by the Government Inspector on a daily basis. The Government may require progress report, depending on the complication of work in the task order. The deliverables identified in Table 3.4.1 will be inspected and tested (if applicable) and either approved or rejected by the Government. The Contractor shall correct all deficiencies in rejected work at no extra cost to the Government unless it is caused by something other than the Contractor’s fault.

ATTACHMENT #2

QUALITY ASSUANCE SURVEILLENCE PLAN

Table 3.4.1: PERFORMANCE STANDARDS

DESIRED

OUTCOMES

PERFORMANCE

STANDARD

MONITORING

METHOD

INCENTIVE/

DISINCENTIVE

1. After completion of a work item, the final work shall be free of defects.

All work performed shall accomplish the requirements in the work statement

Observation of the Contractor’s activities and workmanship in performing the work. Monitor the Contractor-furnished materials;

if needed, randomly request the Contractor to provide purchase invoice to ensure the materials used meet work statement requirements

Full payment shall be made for 100% compliance with the work statement.

Deficiencies will be corrected by Contractor to achieve 100% compliance at no additional cost to the government. Remedies afforded the Government under 52.246-4 Inspection of Services clause apply.

2. After starting a task order, the Contractor’s ability to mobilize equipment and manpower to work site and complete all work on schedule.

All work performed meet schedule 100%.

There is no deficiency in all work performed.

Observation of the Contractor’s daily activities.

Additional progress report and schedule may be requested.

Full payment shall be made for 100% achievement.

Deficiencies will be corrected by Contractor to achieve 100% compliance at no additional cost to the government. Remedies afforded the Government under 52.246-4 Inspection of Services clause apply.

DESIRED

OUTCOMES

PERFORMANCE

STANDARD

MONITORING

METHOD

INCENTIVE/

DISINCENTIVE

3. All work performed shall be free of safety violations. All workers shall have proper safety equipment with them all the times.

During the entire term of contract, there is no safety violations, no injuries, or loss of work day.

Observations of the contractor’s daily activities. Record any safety violations (if applicable) and discuss with the contractor to prevent them from happening in the future.

Full payment shall be made for 100% compliance with no safety violations.

Remedies available to the government under 52.246-4 Inspection of Services clause apply.

If violations occur, contractor can be subject to FAR Clause 52.212-4 Termination For Cause as well as any damages or costs incurred as a result.

3.4.2 Clarification - In FAR Clause 52.246-4, INSPECTION OF SERVICES -- FIXED PRICE (FEB 1992), paragraph e, where it states that "If any of the services do not conform with contract requirements, the Government may require the Contractor to perform the services again in conformity with contract requirements, at no increase in contract amount", for the purpose of this contract, in addition to at no increase in contract amount, it shall be interpreted to include - at no additional cost to the Government.

3.4.3 The Contractor must deliver the desired outcomes for all work listed in the Performance Work Statement according to the performance standards listed in paragraph 3.4.1. Additionally, the work must be fulfilled within the schedule established by individual task orders.

3.5 COVID-19/INFECTOUS DISEASE

3.5.1 All contractor personnel who are working on the Wheeler or in the dry dock, shall follow all CDC health and safety recommendations to prevent the spread and exposure of COVID- 19/Infectious Disease. There may be a requirement for all contractor personnel to submit documentation of, or undergo:

• Health screenings

• Temperature screenings

• Viral COVID-19/Infectious Disease tests within 72 hours of boarding the Dredge

Wheeler

Anti-Terrorism and Security

18. COR will develop & implement site-specific risk measures to maintain positive control of all contractors (Access-Screening-Training Records) and be technically proficient in AT/OPSEC

ATTACHMENT #3

WAGE DETERMINATIONS

"REGISTER OF WAGE DETERMINATIONS UNDER U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT I EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor I WAGE AND HOUR DIVISION

I WASHINGTON D.C.

I I I

20210

Daniel W. Simms Director

I Division of I

Wage Determinations!

Wage Determination No.: 2015-5189 Revision No.: 17

Date Of Last Revision: 12/21/2020

_I Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.95 for calendar year 2021 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.95 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2021. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Louisiana

Area: Louisiana Parishes of Jefferson Orleans Plaquemines Saint John The Baptist St Bernard St Charles St Tammany

**Fr inge Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE

01000 - Administrative Support And Clerical Occupations

RATE

01011 - Accounting Clerk I 14.31 01012 - Accounting Clerk II 16.06 01013 - Accounting Clerk III 17.97 01020 - Administrative Assistant 23.95 01035 - Court Reporter 24.53 01041 - Customer Service Representative I 12.03 01042 - Customer Service Representative II 13.53 01043 - Customer Service Representative III 14.76 01051 - Data Entry Operator I 12.32 01052 - Data Entry Operator II 13.68 01060 - Dispatcher Motor Vehicle 18.60 01070 - Document Preparation Clerk 17.50 01090 - Duplicating Machine Operator 17.50 01111 - General Clerk I 11.58 01112 - General Clerk II 12.63 01113 - General Clerk III 14.18 01120 - Housing Referral Assistant 21.88 01141 - Messenger Courier 13.61 01191 - Order Clerk I 14.80 01192 - Order Clerk II 16.15 01261 - Personnel Assistant (Employment) I 15.94 01262 - Personnel Assistant (Employment) II 18.12 01263 - Personnel Assistant (Employment) III 19.97 01270 - Production Control Clerk 27.15 01290 - Rental Clerk 14.14 01300 - Scheduler Maintenance 17.56 01311 - Secretary I 17.56 01312 - Secretary II 19.49

01313 - Secretary III 21.88 01320 - Service Order Dispatcher 16.62 01410 - Supply Technician 23.95 01420 - Survey Worker 15.82 01460 - Switchboard Operator/Receptionist 12.58 01531 - Travel Clerk I 17.08 01532 - Travel Clerk II 18.26 01533 - Travel Clerk III 19.27 01611 - Word Processor I 14.19 01612 - Word Processor II 15.92 01613 - Word Processor III 17.82

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer Fiberglass 21.97 05010 - Automotive Electrician 18.40 05040 - Automotive Glass Installer 17.20 05070 - Automotive Worker 17.20 05110 - Mobile Equipment Servicer 14.80 05130 - Motor Equipment Metal Mechanic 19.45 05160 - Motor Equipment Metal Worker 17.20 05190 - Motor Vehicle Mechanic 19.45 05220 - Motor Vehicle Mechanic Helper 13.61 05250 - Motor Vehicle Upholstery Worker 16.02 05280 - Motor Vehicle Wrecker 17.20 05310 - Painter Automotive 18.40 05340 - Radiator Repair Specialist 17.20 05370 - Tire Repairer 12.78 05400 - Transmission Repair Specialist 19.45

07000 - Food Preparation And Service Occupations

07010 - Baker 12.90 07041 - Cook I 12.07 07042 - Cook II 14.20 07070 - Dishwasher 9.57

07130 - Food Service Worker 8.92 07210 - Meat Cutter 14.52 07260 - Waiter/Waitress 8.78

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 17.89 09040 - Furniture Handler 12.60 09080 - Furniture Refinisher 19.15 09090 - Furniture Refinisher Helper 14.59 09110 - Furniture Repairer Minor 17.16 09130 - Upholsterer 17.41

11000 - General Services And Support Occupations

11030 - Cleaner Vehicles 10.05 11060 - Elevator Operator 10.68 11090 - Gardener 16.72 11122 - Housekeeping Aide 10.68 11150 - Janitor 10.68 11210 - Laborer Grounds Maintenance 12.27 11240 - Maid or Houseman 10.63 11260 - Pruner 10.79 11270 - Tractor Operator 15.21 11330 - Trail Maintenance Worker 12.27 11360 - Window Cleaner 12.14

12000 - Health Occupations

12010 - Ambulance Driver 21.29 12011 - Breath Alcohol Technician 21.29 12012 - Certified Occupational Therapist Assistant 27.07 12015 - Certified Physical Therapist Assistant 27.07 12020 - Dental Assistant 16.13 12025 - Dental Hygienist 32.84 12030 - EKG Technician 27.12 12035 - Electroneurodiagnostic Technologist 27.12 12040 - Emergency Medical Technician 21.29 12071 - Licensed Practical Nurse I 17.06

12072 - Licensed Practical Nurse II 19.09 12073 - Licensed Practical Nurse III 21.28 12100 - Medical Assistant 14.82 12130 - Medical Laboratory Technician 23.24 12160 - Medical Record Clerk 15.41 12190 - Medical Record Technician 17.74 12195 - Medical Transcriptionist 16.67 12210 - Nuclear Medicine Technologist 33.53 12221 - Nursing Assistant I 11.45 12222 - Nursing Assistant II 12.87 12223 - Nursing Assistant III 14.04 12224 - Nursing Assistant IV 15.76 12235 - Optical Dispenser 16.47 12236 - Optical Technician 16.86 12250 - Pharmacy Technician 16.26 12280 - Phlebotomist 16.78 12305 - Radiologic Technologist 26.89 12311 - Registered Nurse I 26.17 12312 - Registered Nurse II 33.59 12313 - Registered Nurse II Specialist 33.59 12314 - Registered Nurse III 40.65 12315 - Registered Nurse III Anesthetist 40.65 12316 - Registered Nurse IV 48.72 12317 - Scheduler (Drug and Alcohol Testing) 26.37 12320 - Substance Abuse Treatment Counselor 19.07

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 18.94 13012 - Exhibits Specialist II 23.46 13013 - Exhibits Specialist III 28.70 13041 - Illustrator I 19.74 13042 - Illustrator II 24.45 13043 - Illustrator III 29.91 13047 - Librarian 26.44 13050 - Library Aide/Clerk 14.30 13054 - Library Information Technology Systems 23.87 Administrator 13058 - Library Technician 16.79 13061 - Media Specialist I 17.23 13062 - Media Specialist II 19.27 13063 - Media Specialist III 21.49 13071 - Photographer I 15.35 13072 - Photographer II 17.18 13073 - Photographer III 21.28 13074 - Photographer IV 26.03 13075 - Photographer V 31.49 13090 - Technical Order Library Clerk 16.62 13110 - Video Teleconference Technician 23.20

14000 - Information Technology Occupations

14041 - Computer Operator I 17.11 14042 - Computer Operator II 19.13 14043 - Computer Operator III 21.34 14044 - Computer Operator IV 23.72 14045 - Computer Operator V 26.25 14071 - Computer Programmer I (see 1) 21.79 14072 - Computer Programmer II (see 1) 25.53 14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 17 .11 14160 - Personal Computer Support Technician 23.72 14170 - System Support Specialist 29.79

15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated)

28 . 1

15020 - Aircrew Training Devices Instructor (Rated) 35.65 15030 - Air Crew Training Devices Instructor (Pilot) 40.77 15050 - Computer Based Training Specialist/ Instructor 28.12 15060 - Educational Technologist 23.29 15070 - Flight Instructor (Pilot) 40.77 15080 - Graphic Artist 22.26 15085 - Maintenance Test Pilot Fixed Jet/Prop 40.12 15086 - Maintenance Test Pilot Rotary Wing 40.12 15088 - Non-Maintenance Test/Co-Pilot 40.12 15090 - Technical Instructor 20.08 15095 - Technical Instructor/Course Developer 24.57 15110 - Test Proctor 16.22 15120 - Tutor 16.22

16000 - Laundry Dry-Cleaning Pressing And Related Occupations

16010 - Assembler 10.38 16030 - Counter Attendant 10.38 16040 - Dry Cleaner 12.95 16070 - Finisher Flatwork Machine 10.38 16090 - Presser Hand 10.38 16110 - Presser Machine Drycleaning 10.38 16130 - Presser Machine Shirts 10.38 16160 - Presser Machine Wearing Apparel Laundry 10.38 16190 - Sewing Machine Operator 13.81 16220 - Tailor 14.65 16250 - Washer Machine 11.24

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 23.31 19040 - Tool And Die Maker 29.85

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 17.43 21030 - Material Coordinator 27.76 21040 - Material Expediter 27.76 21050 - Material Handling Laborer 14.29 21071 - Order Filler 11.82 21080 - Production Line Worker (Food Processing) 17.43 21110 - Shipping Packer 14.66 21130 - Shipping/Receiving Clerk 14.66 21140 - Store Worker I 10.19 21150 - Stock Clerk 15.09 21210 - Tools And Parts Attendant 17.43 21410 - Warehouse Specialist 17.43

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 35.17 23019 - Aircraft Logs and Records Technician 26.51 23021 - Aircraft Mechanic I 33.01 23022 - Aircraft Mechanic II 35.17 23023 - Aircraft Mechanic III 37.31 23040 - Aircraft Mechanic Helper 22.17 23050 - Aircraft Painter 30.28 23060 - Aircraft Servicer 26.51 23070 - Aircraft Survival Flight Equipment Technician 30.28 23080 - Aircraft Worker 28.64 23091 I

- Aircrew Life Support Equipment (ALSE) Mechanic 28.64

23092

II

- Aircrew Life Support Equipment (ALSE) Mechanic 33.01

23110 - Appliance Mechanic 20.37 23120 - Bicycle Repairer 18.41 23125 - Cable Splicer 28.39 23130 - Carpenter Maintenance 20.84

23140 - Carpet Layer 21.66 23160 - Electrician Maintenance 24.25 23181 - Electronics Technician Maintenance I 29.64 23182 - Electronics Technician Maintenance II 31.88 23183 - Electronics Technician Maintenance III 34.14

23260 - Fabric Worker 20.05 23290 - Fire Alarm System Mechanic 21.10 23310 - Fire Extinguisher Repairer 18.41 23311 - Fuel Distribution System Mechanic 24.83 23312 - Fuel Distribution System Operator 18.32 23370 - General Maintenance Worker 17.74 23380 - Ground Support Equipment Mechanic 33.01 23381 - Ground Support Equipment Servicer 26.51 23382 - Ground Support Equipment Worker 28.64 23391 - Gunsmith I 18.41 23392 - Gunsmith II 21.66 23393 - Gunsmith III 24.96 23410 - Heating Ventilation And Air-Conditioning 22.03 Mechanic

23411 - Heating Ventilation And Air Contidioning 23.47 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 25.24 23440 - Heavy Equipment Operator 21.13

23460 - Instrument Mechanic 30.80 23465 - Laboratory/Shelter Mechanic 23.31 23470 - Laborer 12.91 23510 - Locksmith 23.38 23530 - Machinery Maintenance Mechanic 26.53 23550 - Machinist Maintenance 24.14 23580 - Maintenance Trades Helper 15.30 23591 - Metrology Technician I 30.80 23592 - Metrology Technician II 32.81 23593 - Metrology Technician III 34.81 23640 - Millwright 27.71 23710 - Office Appliance Repairer 19.05 23760 - Painter Maintenance 18.14 23790 - Pipefitter Maintenance 25.44 23810 - Plumber Maintenance 23.75 23820 - Pneudraulic Systems Mechanic 24.96 23850 - Rigger 24.38 23870 - Scale Mechanic 21.66 23890 - Sheet-Metal Worker Maintenance 22.03 23910 - Small Engine Mechanic 18.40 23931 - Telecommunications Mechanic I 30.28 23932 - Telecommunications Mechanic II 32.26 23950 - Telephone Lineman 21.16 23960 - Welder Combination Maintenance 24.89 23965 - Well Driller 24.96 23970 - Woodcraft Worker 24.96 23980 - Woodworker 18.41

24000 - Personal Needs Occupations

24550 - Case Manager 15.86 24570 - Child Care Attendant 9.58 24580 - Child Care Center Clerk 12.73 24610 - Chore Aide 9.26 24620 - Family Readiness And Support Services 15.86 Coordinator 24630 - Homemaker 15.86

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 23.11 25040 - Sewage Plant Operator 19.50 25070 - Stationary Engineer 23.11 25190 - Ventilation Equipment Tender 15.51 25210 - Water Treatment Plant Operator 19.50

27000 - Protective Service Occupations

27004 - Alarm Monitor 15.66 27007 - Baggage Inspector 13.13

27008 - Corrections Officer 15.61 27010 - Court Security Officer 16.52 27030 - Detection Dog Handler 14.69

27040 - Detention Officer 15.61 27070 - Firefighter 17.56 27101 - Guard I 13.13

27102 - Guard II 14.69 27131 - Police Officer I 20.83 27132 - Police Officer II 23.14

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 15.53 28042 - Carnival Equipment Repairer 17.07 28043 - Carnival Worker 11.02 28210 - Gate Attendant/Gate Tender 13.76 28310 - Lifeguard 12.10 28350 - Park Attendant (Aide) 15.40 28510 - Recreation Aide/Health Facility Attendant 11.24 28515 - Recreation Specialist 18.61 28630 - Sports Official 12.26 28690 - Swimming Pool Operator 20.91

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 23.68 29020 - Hatch Tender 23.68 29030 - Line Handler 23.68 29041 - Stevedore I 21.91 29042 - Stevedore II 25.48

30000 - Technical Occupations

30010 - Air Traffic Control Specialist Center (HFO) (see 2) 39.89 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.50 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.29 30021 - Archeological Technician I 19.63 30022 - Archeological Technician II 21.96 30023 - Archeological Technician III 27.09 30030 - Cartographic Technician 27.22 30040 - Civil Engineering Technician 24.59 30051 - Cryogenic Technician I 29.13

30052 - Cryogenic Technician II 32.17 30061 - Drafter/CAD Operator I 19.63 30062 - Drafter/CAD Operator II 21.96 30063 - Drafter/CAD Operator III 24.49 30064 - Drafter/CAD Operator IV 30.13

30081 - Engineering Technician I 16.09 30082 - Engineering Technician II 18.05 30083 - Engineering Technician III 20.19 30084 - Engineering Technician IV 25.02 30085 - Engineering Technician V 30.61 30086 - Engineering Technician VI 37.03 30090 - Environmental Technician 23.87 30095 - Evidence Control Specialist 26.30 30210 - Laboratory Technician 28.23 30221 - Latent Fingerprint Technician I 28.19

30222 - Latent Fingerprint Technician II 31.15 30240 - Mathematical Technician 27.22 30361 - Paralegal/Legal Assistant I 20.64 30362 - Paralegal/Legal Assistant II 26.00 30363 - Paralegal/Legal Assistant III 31.81 30364 - Paralegal/Legal Assistant IV 38.48 30375 - Petroleum Supply Specialist 32.17 30390 - Photo-Optics Technician 27.22 30395 - Radiation Control Technician 32.17 30461 - Technical Writer I 25.72 30462 - Technical Writer II 31.47 30463 - Technical Writer III 38.07 30491 - Unexploded Ordnance (UXO) Technician I 25.35 30492 - Unexploded Ordnance (UXO) Technician II 30.67 30493 - Unexploded Ordnance (UXO) Technician III 36.76 30494 - Unexploded (UXO) Safety Escort 25.35 30495 - Unexploded (UXO) Sweep Personnel 25.35

30501 - Weather Forecaster I 30502 - Weather Forecaster II 30620 - Weather Observer Combined Upper Air Or Surface Programs

(see 2)

29.13 35.43 24.49

30621 - Weather Observer Senior (see 2) 26.36 31000 - Transportation/Mobile Equipment Operation Occupations

31010 - Airplane Pilot 30.67 31020 - Bus Aide 12.14 31030 - Bus Driver 18.06 31043 - Driver Courier 15.28 31260 - Parking and Lot Attendant 9.46 31290 - Shuttle Bus Driver 16.79 31310 - Taxi Driver 13.50 31361 - Truckdriver Light 16.79 31362 - Truckdriver Medium 18.28 31363 - Truckdriver Heavy 20.58 31364 - Truckdriver Tractor-Trailer 20.58

99000 - Miscellaneous Occupations

99020 - Cabin Safety Specialist 14.95 99030 - Cashier 9.61 99050 - Desk Clerk 12.20 99095 - Embalmer 23.61 99130 - Flight Follower 25.35 99251 - Laboratory Animal Caretaker I 11.66 99252 - Laboratory Animal Caretaker II 12.81 99260 - Marketing Analyst 23.85 99310 - Mortician 27.18 99410 - Pest Controller 17.16 99510 - Photofinishing Worker 14.97 99710 - Recycling Laborer 18.73 99711 - Recycling Specialist 23.23 99730 - Refuse Collector 16.48 99810 - Sales Clerk 11.60 99820 - School Crossing Guard 12.36 99830 - Survey Party Chief 22.91 99831 - Surveying Aide 16.93 99832 - Surveying Technician 20.82 99840 - Vending Machine Attendant 12.18 99841 - Vending Machine Repairer 16.52 99842 - Vending Machine Repairer Helper 12.18

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year.