W912P6-20-B-0007-0002.pdf

W81G6600989835

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

REFERENCE SOLICITATION NUMBER W912P6-20-B-0007

The referenced Solicitation is NOT EXTENDED by this Amendment. Therefore, responses to this Solicitation shall be furnished no later than 1:00 p.m. (CDT) on 14 September 2020. Details regarding bid submission are contained at Section 00 21 13 of the solicitation document. The amendment particulars follow on the next pages, w herein including an updated Wage Determination; revisions to plans and draw ings; and responses to contractors' questions.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 7

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 10-Sep-2020

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912P620B0007

X 9B. DATED (SEE ITEM 11)

04-Aug-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

10-Sep-2020

CODE

U.S. ARMY ENGINEER DISTRICT, CHICAGO

231 SOUTH LASALLE STREET SUITE 1500

CHICAGO IL 60604-1437

W912P6 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912P620B0007

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

The following items are applicable to this modification:

AMENDMENT PARTICULARS

A. CHANGES TO SOLICITATION

1. Updated Wage Determination WI20200015 dated 28 August 2020 is provided by this amendment.

[End of changes to Solicitation]

B. CHANGES TO PLANS

The revised plans are provided with this amendment at beta.SAM.gov in the file named “Amendment 0002 revised plans and drawings.” The following is a summary of changes made by this amendment:

1. Delete sheet GI001, add revised sheet GI001

2. Delete sheet SC512, add revised sheet SC512

3. Delete sheet S-101, add revised sheet S-101

4. Delete sheet SB502, add revised sheet SB502

5. Delete sheet SD300, add revised sheet SD300 per question and answer 37 in amendment 0001.

6. Delete sheet SS502, add revised sheet SS502, provides clarifying notes.

7. Delete sheet CG310, add revised sheet CG310 per question and answer 29 in amendment 0001.

8. Delete sheet S-111, add revised sheet S-111

9. Delete sheet SB512, add revised sheet SB512

10. Delete sheet SD310, add revised sheet SD310 per question and answer 37 in amendment 0001.

11. Delete sheet SC511, add revised sheet SC511

12. Delete sheet M-500, add revised sheet M-500

13. Delete sheet SC210, add revised sheet SC210

[End of changes to Plans]

C. CONTRACTOR INQUIRIES

By this Amendment 0002, the Chicago District, USACE provides its responses to contractor inquiries:

Q61. Sluiceway stoplog section detail C1/SS502 and SS512 show a sill plate at the sluiceway stoplogs. Is this required at all gates? What pay item are the sluiceway stoplogs under? There is a pay item for spillway stoplogs only at the lower dam.

USACE answer Q61: A stainless steel sill plate is not required. This amendment revises detail C1/SS502 to remove the stainless-steel sill plate requirement. AMENDMENT 0001 clarified that bid item 0010 should be used for all stoplogs.

Q62. Drawing M-500 Detail A6 has a note that states ‘Material: Bronze (See Spec.) We cannot locate a bonze specification in 05 59 13 or 05 59 20. Can you please provide?

USACE answer Q62: The bronze material was specified in Section 35 05 40 paragraph 2.1.1.e.

Q63. Based on water elevations in the specification and elevations shown on SD301, it is assumed that some of the area that needs to be repointed is under water which will require a cofferdam. Please confirm some repointing is under water. Is any repointing under the mud line?

USACE answer Q63: Yes, the entire abutment requires repointing (including the wall above and below the water and mud line, if applicable) as identified on Sheet SD301. Water elevation information was included in the specifications in SECTION 01 35 13; please see tables titled “Lower Appleton Dam hydrostatic loading per ETL 1110-2-584” and “Upper Appleton Dam hydrostatic loading per ETL 1110-2-584” on pages 66–67 of the specs file.

Q64. Based on this no construction zone for the eagle nesting, what is considered a construction activity? Can we push a barge setup with a crane through this zone? What about materials barges loaded with gates?

USACE answer Q64: The USFWS website for bald eagle does not address boat traffic as a construction activity, but does give guidance elsewhere on boat traffic relative to bald eagle nests: “For all motorized boat traffic within 330 feet (100 meters) of the nest, minimize trips and avoid stopping in the area, particularly where eagles are unaccustomed to boat traffic.” Therefore, barge passage, regardless of what the cargo is, is not restricted.

Q65. Tainter Gates: Does the fabrication of the Tainter gates need to be completed by an AISC certified fabricator?

We have had success on other COE projects with non AISC fabricator.

USACE answer Q65: Yes, SECTION 05 59 13.01 04 paragraph 1.5.3 states the requirement that the fabricating plant and fabricator be certified by the current AISC Quality Certification Program and shall be designated an AISC Certified Plant.

Q66. Fencing: Section 32 31 13.53 states that fence post shall be set in zinc-coated sleeve embedded a minimum of 12’’ into the concrete slab/wall. Would plate mounted post, secured with mechanical anchors be an acceptable alternative?

USACE answer Q66: The Government would accept this proposed alternative.

Q67. Will the railings, ladders and grating be subject to the certification and weld testing requirements of divisions 05 59 13 and/or 05 59 20? Or what division covers these items? For example does the fabricator of these miscellaneous weldments need AISC certification as described in 05 59 13?

USACE answer Q67: The miscellaneous weldments described in the comment are not considered hydraulic steel structures, therefore, the requirements of SECTION 05 59 13.01 04 would apply to these items.

Q68. The existing guard rail is painted blue. Will the new guard rail require painting?

USACE answer Q68: The new guard/hand railing will be galvanized as described throughout the contract drawings.

Q69. Questions regarding the option 1 and option 2 handrail: What are the material sizes? Are there any differences between option 1 and option 2 handrail other than Qty.? For each quantity of handrail, is there a rail located on the near side and one on the far side? Can you provide a detail of what is required for the safety gate?

USACE answer Q69: This amendment provides the following revised sheets to clarify the requirements of the handrail and safety gate: GI001, SC512, SB512, S-111, SB502, and S-101. The difference betweem option 1 and option 2 is that option 1 is for ALD and option 2 is for AUD, no other differences.

Q70. For the sluiceway stoplogs, is the required design to be similar to the provided sketch, utilizing square tube?

USACE answer Q70: No. Any galvanized steel AISC shape that meets the requirements of ETL 584 is acceptable.

Q71. Do sections 1.2.2.1 Air Monitoring, 1.2.2.2 Medical Status and section 1.2.2.3 of the specifications apply to shop painting?

USACE answer Q71: Yes, these requirements would also apply to shop painting.

Q72. 05 59 13.01 04 1.3.2 States that fabricated structural steel for the walkways are assumed to be Fracture Critical Members. On past projects this type of structural steel has not been considered fracture critical. Making this material fracture critical will eliminate many vendors from pricing the material as the vast majority of steel suppliers/fabricators do not carry the fracture critical certification. Companies that often perform fracture critical work do not usually build/price work like what is shown for the walkways and handrails. We concede that the new Tainter gates should be constructed as fracture critical members but ask that the required be removed for walkways.

USACE answer Q72: Fracture critical members are identified throughout the drawings with an “FCM” designation and no changes to the designated fracture critical members will be made as a result of this comment.

Q73. At the lower dam plans call out for the existing limestone abutments to be repointed. Do we need to repoint areas that are below the water line? This would require additional cofferdam and dewatering to access.

USACE answer Q73: Yes, the entire abutment requires repointing (including the wall above and below the water line) as identified on Sheet SD301. Water elevation information was included in the specifications in SECTION 01 35 13; please see tables titled “Lower Appleton Dam hydrostatic loading per ETL 1110-2-584” and “Upper Appleton Dam hydrostatic loading per ETL 1110-2-584” on pages 66–67 of the specs file.

Q74. What are the requirements to re-calibrate the re-installed inclinometers after the new Tainter gates are installed?

USACE answer Q74: There is no requirement for calibration of the inclinometer rather they should only be reinstalled on the gate arm, as required on SHEETS SD101 and SD111.

Q75. Spillway Stoplogs: Per specification SECTION 35 20 15 FRP COMPOSITES FOR LOW_HEAD WATER CONTROL STRUCTURE, section 2.3.3 Rubber Seals, would Polyurethane vertical seals and a neoprene horizontal invert seal be an acceptable alternate to the spec’d fluorocarbon seals?

USACE answer Q75: Seals must be natural rubber. Neoprene has proven to not seal as well as natural rubber in cold temperatures.

Q76. Spillway Stoplogs: Per specification SECTION 35 20 15 FRP COMPOSITES FOR LOW_HEAD WATER CONTROL STRUCTURE, would 316SS Stop Logs be an acceptable alternate to the spec’d FRP stop logs USACE answer Q76: The Government desires FRP stoplogs for the spillway.

Q77. Repointing of existing limestone abutments: Please provide an elevation for the limits of the repointing of the limestone walls. Are only the sections above water level to be repointed?

USACE answer Q77: The entire abutment (including the wall above and below the water line) requires repointing as identified on Sheet SD301. Water elevation information was included in the specifications in SECTION 01 35 13;

please see tables titled “Lower Appleton Dam hydrostatic loading per ETL 1110-2-584” and “Upper Appleton Dam hydrostatic loading per ETL 1110-2-584” on pages 66–67 of the specs file.

Q78. In reference to the following questions, please see attached drawing “SS502 with questions.” Can you provide more detail on lifting device shown in detail A1? Dimensions shown in detail C1 do not match detail shown in detail F1. Please advise. Re Detail A4, scaling the detail off would indicate that a W4x13 Beam is to be used for the upright supports. Can you verify that this is correct?

USACE answer Q78: Per requirements of SECTIONS 35 20 14 and 35 20 15, the lifting beam, stoplogs and stoplog guides are to be designed and supplied by the Contractor in accordance with the drawings and specifications.

The details referenced above are included to provide the Contractor with a visualization of what will need to be designed. The exact sizing of members and dimensioning will need to be determined by the Contractor.

Q79: Strut PL-Hubs: It looks like the ID for the Hubs will be 6-3/4” and not 10” as called out on C1 (snapshot below). Can you clarify which is correct?

USACE answer Q79: The ID for the hub should be 6-3/4”. This amendment provides revised detail C1 on SHEET

SC511.

Q80. The walkway bridges & handrails are called to be galvanized. Do these components get painted after galvanizing? If so please supply paint system for these.

USACE answer Q80: No. These items are to be galvanized and no additional paint coating system is required.

Q81. Q51 from amendment 1 states that detail A1/SC510 is applicable for the sill plate at the sluiceway stoplogs. This detail was initially shown for the gate sill plate. Can you confirm that new sill plates are needed for the gates and stoplogs at all sluiceways, so 34 total sill plates. All to be installed per detail A1/SC510? Also, this detail has a note about leveling grout to be placed however this is not shown on the detail. Is grout required to install the sill plate?

USACE answer Q81: Sill plates are required for the sluiceway gates, not sluiceway stoplogs. There WAS a detail C1/SS512 and C1/SS502 that showed sill plates for the sluiceway stoplogs (the sluiceway stoplog sill plate is removed from the drawing (C1/SS502) as part of this amendment 0002. Sheet SS512 was revised as part of amendment 0001 to remove the sluiceway stoplog sill plate. No changes are needed to A1/SC510 (sluiceway gate sill plate)). Seventeen (17) sill plates total are required. Yes, the levelling grout is needed; the note covers this. It is required to be placed prior to installing the sill.

Q82. The specified supplier for the Large (C8) and Small (E9) Washers on drawing M-500 just sent us the below comments. They are refusing to quote the washers due to the KARON V coating. Can you please provide a replacement material? Also, it is our understanding that there is not an approved equal to Kamatics products.

“Kamatics is currently working with manufacturing to determine feasibility to manufacture large 14” OD X ¼” thick bronze washer with .020 of KAron on both sides. The double sided nature of the part in combination with the bronze substrate and the relative lack of thickness compared to the diameter of the component presents several challenges for applying liner to and then machining the washer. Also, during initial review of the drawing Kamatics noted that the large washer runs against the bronze of the bushing being quoted above coating (KJBD72596V/ MK-501-5) as well as the housing into which the bushing is installed and some other plate components. Please note that it’s not recommended to run KAron against bronze, and it isn’t clear what the other two surfaces are made from and what their surface roughness is. For typical hydro power applications Kamatics recommends KAron mating surfaces to be made from stainless steels or similar materials with hardness of Rc 40 min and with a surface finish no greater than 16 Ra. It is also not clear what the operating conditions for the washer (or the bushing) are.”

USACE answer Q82: As an alternative, reduce the hub length to 9-1/2" and attach a 1/4" ASTM A564 SS (17-4 PH, Cond H1025) washer to the yoke side of the hub. The washer shall have a 1/8" bevel to allow for tack welding to the hub. Inside and outside diameters of the SS washer shall match washer M-501-2. The mating surface between the SS and bronze washers shall have a surface finish of 16 micro inches. The Karon V coating on the bronze washer is required only on the side of the washer mating with the SS washer. Contractor shall submit weld procedure for tack weld. Please see revised sheets M-500 and SC210 provided with this amendment.

Q83. Per specification section 05 59 20 subsection 1.4.5 – Are stamped fabrication drawings necessary since drawings will be approved by the USACE Engineer of Record?

USACE answer Q83: Per SECTION 05 59 20, any items designed by the Contractor must be prepared and sealed by a Registered Professional Engineer. The only items in this contract that are to be designed by the Contractor would be the spillway and sluiceway stoplogs, lifting beam and spillway stoplog guides which would not require approval by USACE Engineer of Record. All other shop drawings for items designed by the Government would not require the Contractor to obtain sealed shop drawings by a Registered Professional Engineer rather they would require approval by the USACE Engineer of Record.

[End of inquiries section] file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

"General Decision Number: WI20200015 08/28/2020

Superseded General Decision Number: WI20190015

State: Wisconsin

Construction Type: Heavy

Counties: Wisconsin Statewide.

HEAVY CONSTRUCTION PROJECTS (Excluding Tunnel, Sewer, and Water Lines).

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2020. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate,if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/03/2020 1 01/24/2020 2 02/28/2020 3 03/06/2020 4 06/05/2020 5 06/12/2020 6 06/19/2020 7 07/03/2020 8 07/17/2020 9 07/24/2020 10 08/28/2020

BOIL0107-001 01/01/2017

file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

Rates Fringes

BOILERMAKER

Boilermaker.................$ 35.65 29.89 Small Boiler Repair (under 25,000 lbs/hr)..............$ 26.91 16.00

BRWI0001-002 06/03/2019

CRAWFORD, JACKSON, JUNEAU, LA CROSSE, MONROE, TREMPEALEAU, AND

VERNON COUNTIES

Rates Fringes

BRICKLAYER.......................$ 33.80 24.28

BRWI0002-002 06/01/2019

ASHLAND, BAYFIELD, DOUGLAS, AND IRON COUNTIES

Rates Fringes

BRICKLAYER.......................$ 39.94 23.30

BRWI0002-005 06/01/2019

ADAMS, ASHLAND, BARRON, BROWN, BURNETT, CALUMET, CHIPPEWA,

CLARK, COLUMBIA, DODGE, DOOR, DUNN, FLORENCE, FOND DU LAC,

FOREST, GREEN LAKE, IRON, JEFFERSON, KEWAUNEE, LANGLADE,

LINCOLN, MANITOWOC, MARATHON, MARINETTE, MARQUETTE, MENOMINEE,

OCONTO, ONEIDA, OUTAGAMIE, POLK, PORTAGE, RUSK, ST CROIX, SAUK,

SHAWANO, SHEBOYGAN, TAYLOR, VILAS, WALWORTH, WAUPACA, WAUSHARA,

WINNEBAGO, AND WOOD COUNTIES

Rates Fringes

CEMENT MASON/CONCRETE FINISHER...$ 35.51 23.37

BRWI0003-002 06/03/2019

BROWN, DOOR, FLORENCE, KEWAUNEE, MARINETTE, AND OCONTO COUNTIES

Rates Fringes

BRICKLAYER.......................$ 34.18 23.90

BRWI0004-002 06/01/2019

KENOSHA, RACINE, AND WALWORTH COUNTIES

file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

BRICKLAYER.......................$ 38.43 25.10

BRWI0006-002 06/01/2019

ADAMS, CLARK, FOREST, LANGLADE, LINCOLN, MARATHON, MENOMINEE,

ONEIDA, PORTAGE, PRICE, TAYLOR, VILAS AND WOOD COUNTIES

Rates Fringes

BRICKLAYER.......................$ 35.06 23.02

BRWI0007-002 06/03/2019

GREEN, LAFAYETTE, AND ROCK COUNTIES

Rates Fringes

BRICKLAYER.......................$ 35.57 24.22

BRWI0008-002 06/01/2019

MILWAUKEE, OZAUKEE, WASHINGTON, AND WAUKESHA COUNTIES

Rates Fringes

BRICKLAYER.......................$ 38.93 24.22

BRWI0009-001 06/03/2019

GREEN LAKE, MARQUETTE, OUTAGAMIE, SHAWANO, WAUPACA, WASHARA,

AND WINNEBAGO COUNTIES

Rates Fringes

BRICKLAYER.......................$ 34.18 23.90

BRWI0011-002 06/03/2019

CALUMET, FOND DU LAC, MANITOWOC, AND SHEBOYGAN COUNTIES

Rates Fringes

BRICKLAYER.......................$ 34.18 23.90

BRWI0013-002 06/03/2019

DANE, GRANT, IOWA, AND RICHLAND COUNTIES

BRICKLAYER.......................$ 35.56 24.23

file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

BRWI0019-002 06/03/2019

BARRON, BUFFALO, BURNETT, CHIPPEWA, DUNN, EAU CLAIRE, PEPIN,

PIERCE, POLK, RUSK, ST. CROIX, SAWYER AND WASHBURN COUNTIES

Rates Fringes

BRICKLAYER.......................$ 33.40 24.68

BRWI0021-002 06/03/2019

DODGE AND JEFFERSON COUNTIES

Rates Fringes

BRICKLAYER.......................$ 35.75 24.02

BRWI0034-002 06/03/2019

COLUMBIA AND SAUK COUNTIES

Rates Fringes

BRICKLAYER.......................$ 35.56 24.23

CARP0087-001 05/01/2016

BURNETT (W. of Hwy 48), PIERCE (W. of Hwy 29), POLK (W. of Hwys 35, 48 & 65), AND ST. CROIX (W. of Hwy 65) COUNTIES

Rates Fringes

Carpenter & Piledrivermen........$ 36.85 18.39

CARP0252-002 06/01/2016

ADAMS, BARRON, BAYFIELD (Eastern 2/3), BROWN, BUFFALO, BURNETT (E. of Hwy 48), CALUMET, CHIPPEWA, CLARK, COLUMBIA, CRAWFORD, DANE, DODGE, DOOR, DUNN, EAU CLAIRE, FLORENCE (except area bordering Michigan State Line), FOND DU LAC, FOREST, GRANT, GREEN, GREEN LAKE, IOWA, IRON, JACKSON, JEFFERSON, JUNEAU, KEWAUNEE, LA CROSSE, LAFAYETTE, LANGLADE, LINCOLN, MANITOWOC, MARATHON, MARINETTE (except N.E. corner), MARQUETTE, MENOMINEE, MONROE, OCONTO, ONEIDA, OUTAGAMIE, PEPIN, PIERCE (E.

of Hwys 29 & 65), POLK (E. of Hwys 35, 48 & 65), PORTAGE, PRICE, RICHLAND, ROCK, RUSK, SAUK, SAWYER, SHAWANO, SHEBOYGAN, ST CROIX (E. of Hwy 65), TAYLOR, TREMPEALEAU, VERNON, VILAS, WALWORTH, WASHBURN, WAUPACA, WAUSHARA, WINNEBAGO, AND WOOD

COUNTIES

file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

CARPENTER

CARPENTER...................$ 33.56 18.00

MILLWRIGHT..................$ 35.08 18.35

PILEDRIVER..................$ 34.12 18.00

CARP0252-010 06/01/2016

ASHLAND COUNTY

Rates Fringes

Carpenters Carpenter...................$ 33.56 18.00 Millwright..................$ 35.08 18.35 Pile Driver.................$ 34.12 18.00

CARP0264-003 06/01/2016

KENOSHA, MILWAUKEE, OZAUKEE, RACINE, WAUKESHA, AND WASHINGTON

COUNTIES

Rates Fringes

CARPENTER........................$ 35.78 22.11

CARP0361-004 05/01/2018

BAYFIELD (West of Hwy 63) AND DOUGLAS COUNTIES

Rates Fringes

CARPENTER........................$ 36.15 20.43

CARP2337-001 06/01/2016

ZONE A: MILWAUKEE, OZAUKEE, WAUKESHA AND WASHINGTON

ZONE B: KENOSHA & RACINE

Rates Fringes

PILEDRIVERMAN

Zone A......................$ 31.03 22.69 Zone B......................$ 31.03 22.69

CARP2337-003 06/01/2019

MILLWRIGHT

file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

Zone A......................$ 33.58 21.53 Zone B......................$ 33.58 21.53

ZONE DEFINITIONS

ZONE A: MILWAUKEE, OZAUKEE, WAUKESHA AND WASHINGTON COUNTIES

ZONE B: KENOSHA & RACINE COUNTIES

* ELEC0014-002 06/14/2020

ASHLAND, BARRON, BAYFIELD, BUFFALO, BURNETT, CHIPPEWA, CLARK

(except Maryville, Colby, Unity, Sherman, Fremont, Lynn & Sherwood), CRAWFORD, DUNN, EAU CLAIRE, GRANT, IRON, JACKSON, LA

CROSSE, MONROE, PEPIN, PIERCE, POLK, PRICE, RICHLAND, RUSK, ST

CROIX, SAWYER, TAYLOR, TREMPEALEAU, VERNON, AND WASHBURN

COUNTIES

Rates Fringes

Electricians:....................$ 35.98 20.98

* ELEC0014-007 07/05/2020

REMAINING COUNTIES

Rates Fringes

Teledata System Installer Installer/Technician........$ 27.75 15.14

Low voltage construction, installation, maintenance and removal of teledata facilities (voice, data, and video) including outside plant, telephone and data inside wire, interconnect, terminal equipment, central offices, PABX, fiber optic cable and equipment, micro waves, V-SAT, bypass, CATV, WAN (wide area networks), LAN (local area networks), and ISDN (integrated systems digital network).

ELEC0127-002 06/01/2020

KENOSHA COUNTY

Rates Fringes

Electricians:....................$ 41.62 30%+12.70

ELEC0158-002 06/03/2019

BROWN, DOOR, KEWAUNEE, MANITOWOC (except Schleswig), MARINETTE(Wausuakee and area South thereof), OCONTO, MENOMINEE file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

(East of a ine 6 miles West of the West boundary of Oconto County), SHAWANO (Except Area North of Townships of Aniwa and Hutchins) COUNTIES

Rates Fringes

Electricians:....................$ 33.52 29.75%+10.26

ELEC0159-003 06/01/2019

COLUMBIA, DANE, DODGE (Area West of Hwy 26, except Chester and Emmet Townships), GREEN, LAKE (except Townships of Berlin, Seneca, and St. Marie), IOWA, MARQUETTE (except Townships of Neshkoka, Crystal Lake, Newton, and Springfield), and SAUK

COUNTIES

Rates Fringes

Electricians:....................$ 40.30 22.24

ELEC0219-004 06/01/2016

FLORENCE COUNTY (Townships of Aurora, Commonwealth, Fern, Florence and Homestead) AND MARINETTE COUNTY (Township of Niagara)

Rates Fringes

Electricians:

Electrical contracts over $180,000....................$ 32.38 18.63 Electrical contracts under $180,000....................$ 30.18 18.42

* ELEC0242-005 05/31/2020

DOUGLAS COUNTY

Rates Fringes

Electricians:....................$ 39.77 70.69%

* ELEC0388-002 06/01/2020

ADAMS, CLARK (Colby, Freemont, Lynn, Mayville, Sherman, Sherwood, Unity), FOREST, JUNEAU, LANGLADE, LINCOLN, MARATHON, MARINETTE (Beecher, Dunbar, Goodman & Pembine), MENOMINEE (Area West of a line 6 miles West of the West boundary of Oconto County), ONEIDA, PORTAGE, SHAWANO (Aniwa and Hutchins), VILAS

AND WOOD COUNTIES

file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

Electricians:....................$ 34.85 26%+11.20

ELEC0430-002 06/01/2020

RACINE COUNTY (Except Burlington Township)

Rates Fringes

Electricians:....................$ 41.86 22.66

ELEC0494-005 06/01/2020

MILWAUKEE, OZAUKEE, WASHINGTON, AND WAUKESHA COUNTIES

Rates Fringes

Electricians:....................$ 42.84 25.54

ELEC0494-006 06/01/2020

CALUMET (Township of New Holstein), DODGE (East of Hwy 26 including Chester Township), FOND DU LAC, MANITOWOC (Schleswig), and SHEBOYGAN COUNTIES

Rates Fringes

Electricians:....................$ 36.32 22.51

ELEC0494-013 06/07/2020

DODGE (East of Hwy 26 including Chester Twp, excluding Emmet Twp), FOND DU LAC (Except Waupuin), MILWAUKEE, OZAUKEE, MANITOWOC (Schleswig), WASHINGTON, AND WAUKESHA COUNTIES

Rates Fringes

Sound & Communications Installer...................$ 21.46 18.52 Technician..................$ 31.34 20.00

Installation, testing, maintenance, operation and servicing of all sound, intercom, telephone interconnect, closed circuit TV systems, radio systems, background music systems, language laboratories, electronic carillion, antenna distribution systems, clock and program systems and low-voltage systems such as visual nurse call, audio/visual nurse call systems, doctors entrance register systems.

Includes all wire and cable carrying audio, visual, data, light and radio frequency signals. Includes the file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13] installation of conduit, wiremold, or raceways in existing structures that have been occupied for six months or more where required for the protection of the wire or cable, but does not mean a complete conduit or raceway system. work covered does not include the installation of conduit, wiremold or any raceways in any new construction, or the installation of power supply outlets by means of which external electric power is supplied to any of the foregoing equipment or products

ELEC0577-003 06/01/2019

CALUMET (except Township of New Holstein), GREEN LAKE (N. part including Townships of Berlin, St Marie, and Seneca), MARQUETTE (N. part including Townships of Crystal Lake, Neshkoro, Newton, and Springfield), OUTAGAMIE, WAUPACA, WAUSHARA, AND WINNEBAGO

COUNTIES

Rates Fringes

Electricians:....................$ 33.15 28.50%+10.00

ELEC0890-003 06/01/2020

DODGE (Emmet Township only), GREEN, JEFFERSON, LAFAYETTE, RACINE (Burlington Township), ROCK AND WALWORTH COUNTIES

Rates Fringes

Electricians:....................$ 37.41 25.95%+11.11

ELEC0953-001 06/02/2019

Rates Fringes

Line Construction:

(1) Lineman.................$ 47.53 21.43

(2) Heavy Equipment Operator....................$ 42.78 19.80

(3) Equipment Operator......$ 38.02 18.40

(4) Heavy Groundman Driver..$ 33.27 16.88

(5) Light Groundman Driver..$ 30.89 16.11

(6) Groundsman..............$ 26.14 14.60

ENGI0139-001 06/01/2020

KENOSHA, MILWAUKEE, OZAUKEE, RACINE, WASHINGTON, AND WAUKESHA

file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

Power Equipment Operator Group 1.....................$ 47.66 23.15 Group 2.....................$ 47.16 23.15 Group 3.....................$ 46.66 23.15 Group 4.....................$ 45.97 23.15 Group 5.....................$ 42.39 23.15 Group 6.....................$ 37.24 23.15

HAZARDOUS WASTE PREMIUMS:

EPA Level ""A"" Protection: $3.00 per hour EPA Level ""B"" Protection: $2.00 per hour EPA Level ""C"" Protection: $1.00 per hour

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Cranes, Tower Cranes, Pedestal Tower Cranes and Derricks with or w/o attachments with a lifting capacity of over 100 tons; or Cranes, Tower Cranes, Pedestal Tower Cranes and Derricks with boom, leads, and/or jib lengths measuring 176 feet or longer; Self-Erecting Tower Cranes over 4000 lbs lifting capacity; All Cranes with Boom Dollies; Boring Machines (directional); Master Mechanic.

$0.50 additional per hour per 100 tons or 100 ft of boom over 200 ft or lifting capacity of crane over 200 tons to a maximum of 300 tons or 300 ft. Thereafter an increase of $0.01 per ft or ton, whichever is greater.

GROUP 2: Cranes, Tower Cranes, Pedestal Tower Cranes and Derricks with or without attachments with a lifting capacity of 100 tons or less; or Cranes, Tower Cranes Portable Tower Cranes, Pedestal Tower Cranes and Derricks with boom, leadsand/or jib lengths measuring 175 feet or less; Backhoes (excavators) 130,000 lbs and over; Caisson Rigs; Pile Drivers; Boring Machines (vertical or horizontal), Versi-Lift, Tri-Lift, Gantry 20,000 lbs & over.

GROUP 3: Backhoe (excavator) under 130,000 lbs;Self-erecting Tower Crane 4000 lbs & under lifting capacity;Traveling Crane (bridge type); Skid Rigs; Dredge Operator; Mechanic;

Concrete Paver (over 27E); Concrete Spreader and Distributor; Forklift/ Telehandler (machinery- moving / steel erection); Hydro Blaster, 10,000 psi and over

GROUP 4: Material Hoists; Stack Hoists; Hydraulic Backhoe (tractor or truck mounted); Hydraulic Crane, 5 tons or under (tractor or truck mounted); Hoist (tuggers 5 tons & over); Hydro-Excavators/Daylighters; Concrete Pumps Rotec type Conveyors; Tractor/Bulldozer/End Loader (over 40 hp);

Motor Patrol; Scraper Operator; Sideboom; Straddle Carrier;

Welder; Bituminous Plant and Paver Operator; Roller over 5 tons; Rail Leveling Machine (Railroad); Tie Placer; Tie Extractor; Tie Tamper; Stone Leveler; Rotary Drill Operator and Blaster; Percussion Drill Operator; Air Track Drill file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13] and/or Hammers; Gantrys (under 20,000 lbs); Tencher (wheel type or chain type having 8 inch or larger bucket); Milling Machine; Off-Road Material Haulers.

GROUP 5: Backfiller; Concrete Auto Breaker (large); Concrete Finishing Machines (road type); Rubber Tired Roller;

Concrete Batch Hopper; Concrete Conveyor Systems; Grout Pumps; Concrete Mixers (14S or over); Screw Type Pumps and Gypsum Pumps; Tractor, Bulldozer, End Loader (under 40 hp);

Trencher (chain type, bucket under 8 inch); Industrial Locomotives; Rollers under 5 tons; Stump Grinder/Chipper (Large); Timber Equipment; Firemen (pile drivers and derricks); Personnel Hoist, Telehandler over 8000 lbs;

Robotic Tool Carrier with or without attachments

GROUP 6: Tampers - Compactors (riding type); Assistant Engineer; A-Frames and Winch Trucks; Concrete Auto Breaker;

Hydrohammers (small); Brooms and Sweepers; Hoist (tuggers under 5 tons); Boats (Tug, Safety, Work Barges, Launch);

Shouldering Machine Operator; Prestress Machines; Screed Operator; Stone Crushers and Screening Plants; Screed Operators (milling machine), Farm or Industrial Tractor Mounted Equipment; Post Hole Digger; Fireman (asphalt plants); Air Compressors over 400 CFM; Generators, over 150 KW; Augers (vertical and horizontal); Air, Electric, Hydraulic Jacks (slipform); Skid Steer Loaders (with or without attachments); Boiler Operators (temporary heat);

Refrigeration Plant/Freeze Machines; Power Pack Vibratory/Ultra Sound Drivers and Extractors; Welding Machines; Heaters (mechanical); Pumps; Winches (small electric); Oiler and Greaser; Rotary Drill Tender;

Conveyor; Forklifts/Telehandler 8000 lbs & under;

Elevators: Automatic Hoists; Pumps (well points);

Combination Small Equipment Operators

ENGI0139-003 06/01/2020

REMAINING COUNTIES

Rates Fringes

Power Equipment Operator Group 1.....................$ 42.92 23.15 Group 2.....................$ 41.67 23.15 Group 3.....................$ 39.97 23.15 Group 4.....................$ 39.44 23.15 Group 5.....................$ 37.37 23.15 Group 6.....................$ 35.84 23.15

HAZARDOUS WASTE PREMIUMS:

EPA Level ""A"" Protection: $3.00 per hour EPA Level ""B"" Protection: $2.00 per hour EPA Level ""C"" Protection: $1.00 per hour file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Cranes, Tower Cranes and Derricks with or without attachments with a lifting capacity of over 100 tons;

Cranes, Tower Cranes, and Derricks with boom, leads and/or jib lengths 176 ft or longer.

GROUP 2: Backhoes (Excavators) weighing 130,00 lbs and over;

Cranes, Tower Cranes and Derricks with or without attachments with a lifting capacity of 100 tons or less;

Cranes, Tower Cranes, and Derricks with boom, leads, and/or jib lengths 175 ft or less; Caisson Rigs; Pile Driver

GROUP 3: Backhoes (Excavators) weighing under 130,000 lbs;

Travelling Crane (bridge type); Milling Machine; Concrete Paver over 27 E; Concrete Spreader and Distributor;

Concrete Laser Screed; Concrete Grinder and Planing Machine; Slipform Curb and Gutter Machine; Boring Machine (Directional); Dredge Operator; Skid Rigs; over 46 meter Concrete Pump.

GROUP 4: Hydraulic Backhoe (tractor or truck mounted);

Hydraulic Crane, 10 tons or less; Tractor, Bulldozer, or End Loader (over 40 hp); Motor Patrol; Scraper Operator;

Bituminous Plant and Paver Operator; Screed-Milling Machine; Roller over 5 tons; Concrete pumps 46 meter and under; Grout Pumps; Rotec type machine; Hydro Blaster, 10,000 psi and over; Rotary Drill Operator; Percussion Drilling Machine; Air Track Drill with or without integral hammer; Blaster; Boring Machine (vertical or horizontal);

Side Boom; Trencher, wheel type or chain type having 8 inch or larger bucket; Rail Leveling Machine (Railroad); Tie Placer; Tie Extractor; Tie Tamper; Stone Leveler; Straddle Carrier; Material Hoists; Stack Hoist; Man Hoists; Mechanic and Welder; Off Road Material Haulers.

GROUP 5: Tractor, Bulldozer, or Endloader (under 40 hp);

Tampers -Compactors, riding type; Stump Chipper, large;

Roller, Rubber Tire; Backfiller; Trencher, chain type (bucket under 8 inch); Concrete Auto Breaker, large;

Concrete Finishing Machine (road type); Concrete Batch Hopper; Concrete Conveyor Systems; Concrete Mixers, 14S or over; Pumps, Screw Type and Gypsum); Hydrohammers, small;

Brooms and Sweeeprs; Lift Slab Machine; Roller under 5 tons; Industrial Locomotives; Fireman (Pile Drivers and Derricks); Pumps (well points); Hoists, automatic; A-Frames and Winch Trucks; Hoists (tuggers); Boats (Tug, Safety, Work Barges and Launches); Assistant Engineer

GROUP 6: Shouldering Machine Operator; Farm or Industrial Tractor mounted equipment; Post Hole Digger; Auger (vertical and horizontal); Skid Steer Loader with or without attachments; Robotic Tool Carrier with or without file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13] attachments; Power Pack Vibratory/Ultra Sound Driver and Extractor; Fireman (Asphalt Plants); Screed Operator; Stone Crushers and Screening Plants; Air, Electric, Hydraulic Jacks (Slip Form); Prestress Machines; Air Compressor, 400 CFM or over; Refrigeration Plant/Freese Machine; Boiler Operators (temporary heat); Forklifts; Welding Machines;

Generators; Pumps over 3""; Heaters, Mechanical; Combination small equipment operator; Winches, small electric; Oiler;

Greaser; Rotary Drill Tender; Conveyor; Elevator Operator

IRON0008-002 06/01/2020

BROWN, CALUMET, DOOR, FOND DU LAC, KEWAUNEE, MANITOWOC,

MARINETTE, OCONTO, OUTAGAMI, SHAWANO, SHEBOYGAN, AND WINNEBAGO

COUNTIES:

Rates Fringes

IRONWORKER.......................$ 37.31 27.62

Paid Holidays: New Year's Day, Memorial Day, July 4th, Labor Day, Thanksgiving Day & Christmas Day.

IRON0008-003 06/01/2020

KENOSHA, MILWAUKEE, OZAUKEE, RACINE, WALWORTH (N.E. 2/3),

WASHINGTON, AND WAUKESHA COUNTIES

Rates Fringes

IRONWORKER.......................$ 39.11 27.87

Paid Holidays: New Year's Day, Memorial Day, July 4th, Labor Day, Thanksgiving Day & Christmas Day.

IRON0383-001 06/01/2020

ADAMS, COLUMBIA, CRAWFORD, DANE, DODGE, FLORENCE, FOREST,

GRANT, GREENE, (Excluding S.E. tip), GREEN LAKE, IOWA, JEFFERSON, JUNEAU, LA CROSSE, LAFAYETTE, LANGLADE, MARATHON, MARQUETTE, MENOMINEE, MONROE, PORTAGE, RICHLAND, ROCK (Northern area, vicinity of Edgerton and Milton), SAUK, VERNON, WAUPACA, WAUSHARA, AND WOOD COUNTIES

Rates Fringes

IRONWORKER.......................$ 37.10 27.06

file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

IRON0512-008 06/03/2019

BARRON, BUFFALO, CHIPPEWA, CLARK, DUNN, EAU CLAIRE, JACKSON,

PEPIN, PIERCE, POLK, RUSK, ST CROIX, TAYLOR, AND TREMPEALEAU

COUNTIES

Rates Fringes

IRONWORKER.......................$ 37.60 29.40

IRON0512-021 06/03/2019

ASHLAND, BAYFIELD, BURNETT, DOUGLAS, IRON, LINCOLN, ONEIDA,

PRICE, SAWYER, VILAS AND WASHBURN COUNTIES

Rates Fringes

IRONWORKER.......................$ 33.19 29.40

LABO0113-002 06/01/2020

MILWAUKEE AND WAUKESHA COUNTIES

Rates Fringes

LABORER

Group 1.....................$ 30.05 22.26 Group 2.....................$ 30.20 22.26 Group 3.....................$ 30.40 22.26 Group 4.....................$ 30.55 22.26 Group 5.....................$ 30.70 22.26 Group 6.....................$ 26.54 22.26

LABORERS CLASSIFICATIONS

GROUP 1: General Laborer; Tree Trimmer; Conduit Layer;

Demolition and Wrecking Laborer; Guard Rail, Fence, and Bridge Builder; Landscaper; Multiplate Culvert Assembler;

Stone Handler; Bituminous Worker (Shoveler, Loader, and Utility Man); Batch Truck Dumper or Cement Handler;

Bituminous Worker (Dumper, Ironer, Smoother, and Tamper);

Concrete Handler

GROUP 2: Air Tool Operator; Joint Sawer and Filler (Pavement); Vibrator or Tamper Operator (Mechanical Hand Operated); Chain Saw Operator; Demolition Burning Torch Laborer

GROUP 3: Bituminous Worker (Raker and Luteman); Formsetter (Curb, Sidewalk, and Pavement); Strike Off Man

GROUP 4: Line and Grade Specialist file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

GROUP 5: Blaster and Powderman

GROUP 6: Flagperson; traffic control person

LABO0113-003 06/01/2020

OZAUKEE AND WASHINGTON COUNTIES

Rates Fringes

LABORER

Group 1.....................$ 29.30 22.26 Group 2.....................$ 29.40 22.26 Group 3.....................$ 29.45 22.26 Group 4.....................$ 29.65 22.26 Group 5.....................$ 29.50 22.26 Group 6.....................$ 26.39 22.26

LABORERS CLASSIFICATIONS

GROUP 1: General Laborer; Tree Trimmer; Conduit Layer;

Demolition and Wrecking Laborer; Guard Rail, Fence, and Bridge Builder; Landscaper; Multiplate Culvert Assembler;

Stone Handler; Bituminous Worker (Shoveler, Loader, and Utility Man); Batch Truck Dumper or Cement Handler;

Bituminous Worker (Dumper, Ironer, Smoother, and Tamper);

Concrete Handler

GROUP 2: Air Tool Operator; Joint Sawer and Filler (Pavement); Vibrator or Tamper Operator (Mechanical Hand Operated);

GROUP 3: Bituminous Worker (Raker and Luteman); Formsetter (Curb, Sidewalk, and Pavement); Strike Off Man

GROUP 4: Line and Grade Specialist

GROUP 5: Blaster; powderman

GROUP 6: Flagperson and Traffic Control Person

LABO0113-011 06/01/2020

KENOSHA AND RACINE COUNTIES

Rates Fringes

LABORER

Group 1.....................$ 29.11 22.26 Group 2.....................$ 29.26 22.26 Group 3.....................$ 29.46 22.26 file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

Group 4.....................$ 29.43 22.26 Group 5.....................$ 29.76 22.26 Group 6.....................$ 26.25 22.26

LABORERS CLASSIFICATIONS:

GROUP 1: General laborer; Tree Trimmer; Conduit Layer;

Demolition and Wrecking Laborer; Guard Rail, Fence, and Bridge Builder; Landscaper; Multiplate Culvert Assembler;

Stone Handler; Bituminous Worker (Shoveler, Loader, and Utility Man); Batch Truck Dumper or Cement Handler;

Bituminous worker (Dumper, Ironer, Smoother, and Tamper);

Concrete Handler

GROUP 2: Air Tool Operator; Joint Sawer and Filler (Pavement); Vibrator or Tamper Operator (Mechanical Hand Operated); Chain Saw Operator; Demolition Burning Torch Laborer

GROUP 3: Bituminous Worker (Raker and Luteman); Formsetter (Curb, Sidewalk, and Pavement); Strike Off Man

GROUP 4: Line and Grade Specialist

GROUP 5: Blaster and Powderman

GROUP 6: Flagman; traffic control person

LABO0140-002 06/01/2020

ADAMS, ASHLAND, BARRON, BAYFIELD, BROWN, BUFFALO, BURNETT,

CALUMET, CHIPPEWA, CLARK, COLUMBIA, CRAWFORD, DODGE, DOOR,

DOUGLAS, DUNN, EAU CLAIRE, FLORENCE, FOND DU LAC, FOREST,

GRANT, GREEN, GREEN LAKE, IRON, JACKSON, JUNEAU, IOWA,

JEFFERSON, KEWAUNEE, LA CROSSE, LAFAYETTE, LANGLADE, LINCOLN,

MANITOWOC, MARATHON, MARINETTE, MARQUETTE, MENOMINEE, MONROE,

OCONTO, ONEIDA, OUTAGAMIE, PEPIN, PIERCE, POLK, PORTAGE, PRICE,

RICHLAND, ROCK, RUSK, SAUK, SAWYER, SHAWANO, SHEBOYGAN, ST.

CROIX, TAYLOR, TREMPEALEAU, VERNON, VILLAS, WALWORTH, WASHBURN,

WAUPACA, WAUSHARA, WINNEBAGO, AND WOOD COUNTIES

Rates Fringes

LABORER

Group 1.....................$ 33.72 17.95 Group 2.....................$ 33.82 17.95 Group 3.....................$ 33.87 17.95 Group 4.....................$ 34.07 17.95 Group 5.....................$ 33.92 17.95 Group 6.....................$ 30.35 17.95

LABORER CLASSIFICATIONS

file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

GROUP 1: General Laborer; Tree Trimmer; Conduit Layer;

Demolition and Wrecking Laborer; Guard Rail, Fence, and Bridge Builder; Landscaper; Multiplate Culvert Assembler;

Stone Handler; Bitminous Worker (Shoveler, Loader, and Utility Man); Batch Truck Dumper or Cement Handler;

Bituminous Worker (Dumper, Ironer, Smoother and Tamper);

Concrete Handler

GROUP 2: Air Tool Operator; Joint Sawer and Filler (Pavement); Vibrator or Tamper Operator (Mechanical Hand Operated); Chain Saw Operator, Demolition Burning Torch Laborer

GROUP 3: Bituminous Worker (Raker and Luteman); Formsetter (Curb, Sidewalk and Pavement); Strike Off Man

GROUP 4: Line and Grade Secialist

GROUP 5: Blaster; powderman

GROUP 6: Flagperson; Traffic Control

LABO0464-003 06/01/2020

DANE COUNTY

Rates Fringes

LABORER

Group 1.....................$ 34.00 17.95 Group 2.....................$ 34.10 17.95 Group 3.....................$ 34.15 17.95 Group 4.....................$ 34.35 17.95 Group 5.....................$ 34.20 17.95 Group 6.....................$ 30.35 17.95

LABORERS CLASSIFICATIONS:

GROUP 1: General Laborer; Tree Trimmer; Conduit Layer;

Demolition and Wrecking Laborer; Guard Rail, Fence, and Bridge Builder; Landscaper; Multiplate Culvert Assembler;

Stone Handler; Bituminous Worker (Shoveler, Loader, and Utility Man); Batch Truck Dumper or Cement Handler;

Bituminious Worker (Dumper, Ironer, Smoother, and Tamper);

Concrete Handler

GROUP 2: Air Tool Operator; Joint Sawer and Filler (Pavement); Vibrator or Tamper Operator (Mechanical Hand Operated); Chain Saw Operator; Demolition Burning Torch Laborer

GROUP 3: Bituminous Worker (Raker and Luteman); Formsetter file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

(Curb, Sidewalk, and Pavement); Strike Off Man

GROUP 4: Line and Grade Specialist

GROUP 5: Blaster; Powderman

GROUP 6: Flagperson and Traffic Control Person

PAIN0106-008 05/01/2017

ASHLAND, BAYFIELD, BURNETT, AND DOUGLAS COUNTIES

Rates Fringes

Painters:

New:

Brush, Roller..............$ 30.33 17.27 Spray, Sandblast, Steel....$ 30.93 17.27 Repaint:

Brush, Roller..............$ 28.83 17.27 Spray, Sandblast, Steel....$ 29.43 17.27

PAIN0108-002 06/01/2019

RACINE COUNTY

Rates Fringes

Painters:

Brush, Roller...............$ 36.08 20.36 Spray & Sandblast...........$ 37.08 20.36

PAIN0259-002 05/01/2008

BARRON, CHIPPEWA, DUNN, EAU CLAIRE, PEPIN, PIERCE, POLK, RUSK,

SAWYER, ST. CROIX, AND WASHBURN COUNTIES

Rates Fringes

PAINTER..........................$ 24.11 12.15

PAIN0259-004 05/01/2015

BUFFALO, CRAWFORD, JACKSON, LA CROSSE, MONROE, TREMPEALEAU, AND

VERNON COUNTIES

Rates Fringes

PAINTER..........................$ 22.03 12.45

PAIN0781-002 06/01/2019

file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

JEFFERSON, MILWAUKEE, OZAUKEE, WASHINGTON, AND WAUKESHA COUNTIES

Rates Fringes

Painters:

Bridge......................$ 33.30 23.86 Brush.......................$ 32.95 23.86 Spray & Sandblast...........$ 33.70 23.86

PAIN0802-002 06/01/2019

COLUMBIA, DANE, DODGE, GRANT, GREEN, IOWA, LAFAYETTE, RICHLAND,

ROCK, AND SAUK COUNTIES

Rates Fringes

PAINTER

Brush.......................$ 30.93 18.44

PREMIUM PAY:

Structural Steel, Spray, Bridges = $1.00 additional per hour.

PAIN0802-003 06/01/2019

ADAMS, BROWN, CALUMET, CLARK, DOOR, FOND DU LAC, FOREST, GREEN

LAKE, IRON, JUNEAU, KEWAUNEE, LANGLADE, LINCOLN, MANITOWOC,

MARATHON, MARINETTE, MARQUETTE, MENOMINEE, OCONTO, ONEIDA,

OUTAGAMIE, PORTAGE, PRICE, SHAWANO, SHEBOYGAN, TAYLOR, VILAS,

WAUSHARA, WAUPACA, WINNEBAGO, AND WOOD COUNTIES

Rates Fringes

PAINTER..........................$ 30.93 18.58

PAIN0934-001 06/01/2017

KENOSHA AND WALWORTH COUNTIES

Rates Fringes

Painters:

Brush.......................$ 33.74 18.95 Spray.......................$ 34.74 18.95 Structural Steel............$ 33.89 18.95

PAIN1011-002 06/02/2019

FLORENCE COUNTY

file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

Painters:........................$ 25.76 13.33

PLAS0599-010 06/01/2017

Rates Fringes

CEMENT MASON/CONCRETE FINISHER

Area 1......................$ 39.46 17.17 Area 2 (BAC)................$ 35.07 19.75 Area 3......................$ 35.61 19.40 Area 4......................$ 34.70 20.51 Area 5......................$ 36.27 18.73 Area 6......................$ 32.02 22.99

AREA DESCRIPTIONS

AREA 1: BAYFIELD, DOUGLAS, PRICE, SAWYER, AND WASHBURN

COUNTIES

AREA 2: ADAMS, ASHLAND, BARRON, BROWN, BURNETT, CALUMET,

CHIPPEWA, CLARK, COLUMBIA, DODGE, DOOR, DUNN, FLORENCE,

FOND DU LAC, FOREST, GREEN LAKE, IRON, JEFFERSON, KEWAUNEE,

LANGLADE, LINCOLN, MANITOWOC, MARATHON, MARINETTE,

MARQUETTE, MENOMINEE, OCONTO, ONEIDA, OUTAGAMIE, POLK,

PORTAGE, RUSK, ST CROIX, SAUK, SHAWANO, SHEBOYGAN, TAYLOR,

VILAS, WALWORTH, WAUPACA, WAUSHARA, WINNEBAGO, AND WOOD

COUNTIES

AREA 3: BUFFALO, CRAWFORD, EAU CLAIRE, JACKSON, JUNEAU, LA

CROSSE MONROE, PEPIN, PIERCE, RICHLAND, TREMPEALEAU, AND

VERNON COUNTIES

AREA 4: MILWAUKEE, OZAUKEE, WASHINGTON, AND WAUKESHA COUNTIES

AREA 5: DANE, GRANT, GREEN, IOWA, LAFAYETTE, AND ROCK

AREA 6: KENOSHA AND RACINE COUNTIES

PLUM0011-003 05/07/2018

ASHLAND, BAYFIELD, BURNETT, DOUGLAS, IRON, SAWYER, AND WASHBURN

COUNTIES

Rates Fringes

PLUMBER..........................$ 40.63 20.72

PLUM0075-002 06/01/2016

file:///C/Users/H6PMDPLW/Documents/Appleton%20dams/Amendment%200002/WI20200015%208.28.2020.txt[9/9/2020 16:59:13]

MILWAUKEE, OZAUKEE, WASHINGTON, AND WAUKESHA COUNTIES

Rate…