W912P519B0003 final.pdf

W38XDD01291495

PROJECT TITLE: Barkley Pow er Plant Turbine Generator Rehabilitation, Kuttaw a, KY

TYPE OF CONTRACT: Firm Fixed-Price Construction Contract

DISCLOSURE OF MAGNITUDE OF THE PROPOSED CONSTRUCTION PROJECT: Betw een $25,000,000 and $100,000,000.

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM CODE (NAICS): 237990, Other Heavy and Civil Engineering Construction

SIZE STANDARD: $39.5M

TYPE OF SET-ASIDE: This is a Full and Open procurement. In accordance w ith Federal Acquisition Regulation 19.1307, this project requires the HUBZone 10% price evaluation.

This solicitation contains DEFINITIVE RESPONSIBILITY CRITERIA as a precondition to aw ard. See Section 00100 (paragraph 13).

Bids received by email or facsimile w ill not be considered.

X

KRISTAL R. JONES (615) 736-7916

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

18-May-2020

(RFP)

(IFB)

CALL:

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA

FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance w ithin _______10 calendar days and complete it w ithin ________2408 calendar days after receiving aw ard, X notice to proceed. This performance period is X mandatory, negotiable. (See _________________________52.211-10

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

X YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________0 copies to perform the w ork required are due at the place specif ied in Item 8 by ___________ local time ______________15 Jul 2020 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time of fers are due.

B. An offer guarantee X is, is not required.

C. All offers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______60 calendar days for Government acceptance after the date offers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

7. ISSUED BY CODE

US ARMY CORPS OF ENGINEERS-CELRN-RC-N

DIRECTORATE OF CONTRACTING

110 9TH AVENUE SOUTH, RM A680

NASHVILLE TN 37203

W912P5

PAGE OF PAGES

1 OF

CODE W912P5

(Title, identifying no., date):

12B. CALENDAR DAYS

01:00 PM (hour)

Sealed envelopes containing offers

CONTRACTING DIVISION (KRJ)

KRISTAL.R.JONES@USACE.ARMY.MIL

(615) 736-7916

(615) 736-7124 (FAX)

NASHVILLE TN 37203

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

8. ADDRESS OFFER TO (If Other Than Item 7)

615-736-7124FAX:TEL: 615-736-7932 TEL: (615) 736-7916 FAX: (615) 736-7124

W912P519B0003 79

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE FACILITY CODE

17. The offeror agrees to perform the w ork required at the prices specif ied below in strict accordance w ith the terms of this solicitation, if this offer is accepted by the Government in w riting w ithin ________ calendar days after the date offers are due.

the minimum requirements stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS SEE SCHEDULE OF PRICES

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

CODE

(Insert any number equal to or greater than

20C. OFFER DATE

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE27. PAYMENT WILL BE MADE BY:26. ADMINISTERED BY

(Include ZIP Code)14. NAME AND ADDRESS OF OFFEROR 15. TELEPHONE NO. (Include area code)

See Item 14

(Include only if different than Item 14)16. REMITTANCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor is not required to sign this document.)

document and return _______ copies to issuing office.) Contractor agrees Your of f er on this solicitation, is hereby accepted as to the items listed. This award con-to f urnish and deliv er all items or perf orm all work, requisitions identif ied summates the contract, which consists of (a) the Gov ernment solicitation and on this f orm and any continuation sheets f or the consideration stated in this y our of f er, and (b) this contract award. No f urther contractual document is contract. The rights and obligations of the parties to this contract shall be necessary .

gov erned by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certif ications, and specif ications or incorporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print)

TEL: EMAIL:

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this28. NEGOTIATED AGREEMENT

(M ust be fully completed by offeror)OFFER

W912P519B0003

Section 00 10 00 - Solicitation

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Barkley Turbine Generator

FFP

Rehabilitate four (4) turbine-generators at the Barkley Power Plant, Kuttawa, KY in accordance with the technical specifications and plans. NOTE: This CLIN should include the total for all bid schedule line items (base and all options).

MILSTRIP: W38XDD01291495

PURCHASE REQUEST NUMBER: W38XDD01291495

NET AMT

0001AA 1 Job Barkley Turbine Generator

FFP

Rehabilitate four (4) turbine-generators at the Barkley Power Plant, Kuttawa, KY in accordance with the technical specifications and plans. NOTE: This CLIN is for

FUNDING PURPOSES ONLY. DO NOT INCLUDE PRICING ON THIS CLIN.

FOB: Destination

0001AB 1 Job Barkley Turbine Generator

FFP

Rehabilitate four (4) turbine-generators at the Barkley Power Plant, Kuttawa, KY in accordance with the technical specifications and plans. NOTE: This CLIN is for

FUNDING PURPOSES ONLY. DO NOT INCLUDE PRICING ON THIS CLIN.

FOB: Destination

0001AC 1 Job Barkley Turbine Generator

FFP

Rehabilitate four (4) turbine-generators at the Barkley Power Plant, Kuttawa, KY in accordance with the technical specifications and plans. NOTE: This CLIN is for

FUNDING PURPOSES ONLY. DO NOT INCLUDE PRICING ON THIS CLIN.

FOB: Destination

0001AD 1 Job Barkley Turbine Generator

FFP

Rehabilitate four (4) turbine-generators at the Barkley Power Plant, Kuttawa, KY in accordance with the technical specifications and plans. NOTE: This CLIN is for

FUNDING PURPOSES ONLY. DO NOT INCLUDE PRICING ON THIS CLIN.

FOB: Destination

0001AE 1 Job Barkley Turbine Generator

FFP

Rehabilitate four (4) turbine-generators at the Barkley Power Plant, Kuttawa, KY in accordance with the technical specifications and plans. NOTE: This CLIN is for

FUNDING PURPOSES ONLY. DO NOT INCLUDE PRICING ON THIS CLIN.

FOB: Destination

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 N/A N/A N/A N/A

0001AA 2408 dys. ANP 1 WEST KY AREA OFC, BARKLEY P/P

JEREMIAH P. MANNING

8439 US HWY 62 WEST

KUTTAWA KY 42055

(270) 362-2163 FOB: Destination

W912P5

0001AB 2408 dys. ANP 1 (SAME AS PREVIOUS LOCATION)

0001AC 2408 dys. ANP 1 (SAME AS PREVIOUS LOCATION)

0001AD 2408 dys. ANP 1 (SAME AS PREVIOUS LOCATION)

0001AE 2408 dys. ANP 1 (SAME AS PREVIOUS LOCATION)

Section 00 21 00 - Instructions

BID SCHEDULE

Unit 4: Base

BID SCHEDULE

Item No. Description Est.

Qty. UOM

Unit Price Amount

0100-0117 SITE WORK AND STRUCTURAL

Disassemble Hydraulic Turbine/Generator Unit and Inspect Components, Unit 4 1 Job $ $

Reassemble Generating Unit with New Runner and Components, Unit 4 1 Job $ $

0102 Furnish Center Hole Jacking System 1 Job $ $ 0103 Pre-Disassembly Measurements and Tests, Unit 4 1 Job $ $

Operational Testing After Reassembly of Generating Unit, Unit 4 1 Job $ $

0105 Painting Turbine Components, Unit 4 1 Job $ $

Painting Generator Cover Plates, Hand Rails, Exciter Housing, Oil Head Chambers, Unit 4 1 Job $ $

0107 On-site Lead Based Paint Removal and Disposal, Unit 4 1 Job $ $ 0108 Provide New Turbine Maintenance Platform 1 Job $ $ 0109 Clean and Visually Inspect Oil and Water Piping, Unit 4 1 Job $ $ 0110 Disposal of Existing Turbine Hub Grease, Unit 4 1 Job $ $ 0111 Reserved 1 Job $ $ 0112 One Set of Draft Tube Stop Logs 1 Job $ $

Provide New Draft Tube Man Door and Refurbish Door Frame, Unit 4 1 Job $ $

0114 Supply Turbine Oil, Unit 4 7100 Gal $ $

Engineering and Installation of Outdoor Display Runner and Sign

1 Job $ $

0116 Below the Hook Lifting Devices 1 Job $ $ 0117 Drain, Clean, and Flush System, Unit 4 1 Job $ $

0118-0171 MECHANICAL WORK

Design, Manufacture, Test and Deliver 63,605 hp Kaplan Runner Assembly, Unit 4

Job

0119 Furnish Turbine Model 1 Job $ $ 0120 Ship Turbine Shaft to and from Contractor's Shop, Unit 4 1 Job $ $

Ship Intermediate Shaft to and from Contractor's Shop, Unit

Job

Ship Generator Shaft and Thrust Bearing Runner to and from Contractor's Shop, Unit 4

Job

Machine Turbine Shaft Flange Face as Needed for New Runner Hub and Boring for New Coupling Bolts, Unit 4.

Job

Inspect, Ship, and Refurbish Upper Generator Guide Bearing Pads, Unit 4 1 Job $ $

0125 Inspect, Ship, and Refurbish Lower Generator Guide Bearing Pads, Unit 4 1 Job $ $

0126 Provide New Turbine Guide Bearing, Unit 4 1 Job $ $ 0127 Furnish New Turbine Guide Bearing, Spare Bearing 1 Job $ $ 0128 Inspect Spare Upper Generator Guide Bearing Pads 1 Job $ $ 0129 Inspect Spare Lower Generator Guide Bearing Pads 1 Job $ $ 0130 Generator Thrust Bearing Phase 1 Inspection, Unit 4 1 Job $ $

Generator Thrust Bearing Phase 1 Inspection, Spare Thrust Bearing 1 Job $ $

Inspect and Refurbish Air Breaker, Air Depression Valve, Draft Tube and Scroll Case Unwatering Valve and Check Valve Assemblies, Unit 4 1 Job $ $

0133 Refurbish Wicket Gate Servomotors, Unit 4 1 Job $ $ 0134 Inspect and Refurbish Existing Wicket Gates, Unit 4 1 Job $ $

Provide New Greased Bushings/Bearing Plate for Wicket Gate Linkage, Operating Mechanism, Gate Stem, Wicket Gate Servos and Vacuum Valve, Unit 4 1 Job $ $

0136 Wicket Gate Operating Mechanism Refurbishment, Unit 4 1 Job $ $

Provide a Pneumatic Shear Pin Detection System with Alarms, Unit 4 1 Job $ $

Provide One Set of Shear Pins, Including One Set of Spare Shear Pins, Unit 4 1 Job $ $

0139 Stay Ring Inspection, Unit 4 1 Job $ $

Head Covers and Facing Plate Inspection and Refurbishment, Unit 4 1 Job $ $

Machining of Stay Ring Mounting Flange and Surface for Outer Head Cover, Unit 4 1 Job $ $

Bottom Ring (Top of Discharge Ring) and Facing Plate Inspection and Refurbishment, Unit 4 1 Job $ $

0143 Operating Ring Refurbishment, Unit 4 1 Job $ $

Line Bore Wicket Gate Stem Bushing Housings. Upper 2 sets of bushings shop bored and lower set field bored, Unit 4 1 Job $ $

0145 Provide New Packing Box, Gland, and Lantern, Unit 4 1 Job $ $ 0146 Provide Shaft Sleeve, Unit 4 1 Job $ $ 0147 Installation of Discharge Ring Anchors: 435, Unit 4 1 Job $ $ 0148 First 10 Cubic Feet of Epoxy, Unit 4 1 EA $ $ 0149 Provide Automatic Grease System, Unit 4 1 Job $ $ 0150 Provide Turbine Guide Bearing Oil System, Unit 4 1 Job $ $ 0151 Provide Head Cover Drainage Pumps System, Unit 4 1 Job $ $ 0152 Design and Provide Thrust Bearing Oil Coolers, Unit 4 1 Job $ $ 0153 HPOIS, Unit 4 1 Job $ $ 0154 Brake and Jack System Replacement, Unit 4 1 Job $ $ 0155 Brake Ring Field Inspection, Unit 4 1 Job $ $ 0156 New Static Oil Head System, Unit 4 1 Job $ $ 0157 Piezometer Tap Inspection and Surface Treatment, Unit 4 1 Job $ $

0158 Discharge Ring 48" Weld Overlay and Machining, Unit 4 1 Job $ $

Blade Servomotor Refurbishment including Honing for Cast Iron Rings, Unit 4 1 Job $ $

0160 Turbine Guide Bearing Cover, Unit 4 1 Job $ $

Provide New Inner, Intermediate, and Outer Head Cover flange coupling bolts (horizontal and vertical), Unit 4 1 Job $ $

0162 Runner Leakage Detection System, Unit 4 1 Job $ $ 0163 Scroll Case Man Door Refurbishment, Unit 4 1 Job $ $

Provide New Draft Tube Man Door and Refurbish Door Frame, Unit 4 1 Job $ $

0165 Intermediate Shaft Modifications, Unit 4 1 Job $ $ 0166 Machine Head Cover Flanges in Shop, Unit 4 1 Job $ $ 0167 GENMAT Thrust Bearing Analysis 1 Job $ $ 0168 Existing Generator Air Cooler Testing 1 Job $ $

Blade Servomotor FEA Including Piston Cap, Joint Fasteners, and Piston 1 Job $ $

0170 Oil Purification System 1 Job $ $ 0171 Oil Water Skimmer 1 Job $ $

0172-0187 ELECTRICAL WORK

Furnish Complete Set Of Stator Coils Including Supplies and Accessories For A Complete New Winding Including Factory Testing, Unit 4 1 Job $ $

Manufacture prototype coils identical to production coils and perform prototype testing, Unit 4 1 Job $ $

Furnish production run coils for and perform voltage endurance testing of production run coils, Unit 4 1 Job $ $

0175 Furnish Spare Parts, Unit 4 1 Job $ $ 0176 Removing Abandoned Rotating Exciter Parts, Unit 4 1 Job $ $ 0177 Furnish and Install New Stator Core, Unit 4 1 Job $ $ 0178 Install and Test New Stator Winding, Unit 4 1 Job $ $ 0179 Furnish and Install New Generator Terminal Box, Unit 4 1 Job $ $ 0180 Rewire Turbine Pit and Generator, Unit 4 1 Job $ $ 0181 Perform Special Field Tests, Unit 4 1 Job $ $

Furnish Two Assembled Spare Pole Assemblies with Universal Connections 1 Job $ $

Remove, Furnish and Install Rotor Field Pole Assemblies with Class F Insulation, Unit 4 1 Job $ $

Furnish and Install Generator Potential Transformers and Surge Arresters, Unit 4 1 Job $ $

Furnish and Install General Field Wiring, RTDs, Conduit, Gauges, and Switches, Unit 4 1 Job $ $

Furnish and Install Complete New Machine Condition Monitoring System, Unit 4 1 Job $ $

0187 Vectorize Designated Reference Drawings 1 Job $ $

0188-0217 CONTRACT OPTIONS

0188 Generator Thrust Bearing Phase 2 Inspection, Unit 4 (OPTION) 1 Job $ $

Shipment and Refurbish Thrust Bearing Shoes, Including Babbitting, Machining, GENMAT Spacers, and Backside Machining, Unit 4 (OPTION) 1 Job $ $

Refurbish Generator Shaft at Contractor's Shop, Unit 4 (OPTION) 1 Job $ $

Resurface Thrust Bearing Runner on Generator Shaft, Unit 4 (OPTION) 1 Job $ $

0192 Reserved

Blade Servomotor Machining for Cast Iron Rings below Piston, Unit 4 (OPTION) 1 Job $ $

Provide New Generator Air Coolers and Provide Spares, Unit 4 (OPTION) 1 Job $ $

Shipment and Refurbishment of Thrust Bearing Runner Including Resurface Running Face, Resurface Backside, Split Face Work, Furnish Keys and Split Bolts/Hardware, Unit 4 (OPTION) 1 Job $ $

0196 Chrome Plate Gate Servo Piston Rod, Unit 4 (OPTION) 1 Job $ $ 0197 Brake Ring Refurbishment, Unit 4 (OPTION) 1 Job $ $ 0198 Reserved.

0199 Reserved.

0200 Reserved.

0201 Reserved.

0202 Reserved.

0203 Reserved.

Miscellaneous Parts and Materials Including Transportation, Unit 4 (OPTION) 1 Job NTE

0205 Discharge Ring Insert, Unit 4 (OPTION) 1 Job $ $ 0206 Replacement Wicket Gate End Faces (OPTION) 1 Job $ $ 0207 Reserved.

Head Cover Sealing Flanges O-Ring Groove Modification, Unit 4 (OPTION) 1 Job $ $

0209 Reserved.

Restore Wicket Gate Servomotor Head Spigot Fit, Unit 4 (OPTION) 1 Job $ $

0211 Machining Below Shaft Sleeve, Unit 4 (OPTION) 1 Job $ $ 0212 Reserved. 1 Job $ $ 0213 Reserved.

0214 Reserved.

Wicket Gate Servomotor Bore Machining, Unit 4 (OPTION) 1 Job $ $

Provide Blade Servomotor Piston Cap and Fasteners, Unit 4 (OPTION) 1 Job $ $

0217 Reserved. $ $

Unit 3: Base

Est.

Qty. UOM

Unit Price Amount

0218-0228 SITE WORK AND STRUCTURAL

Disassemble Hydraulic Turbine/Generator Unit and Inspect Components, Unit 3 1 Job $ $

Reassemble Generating Unit with New Runner and Components, Unit 3 1 Job $ $

0220 Pre-Disassembly Measurements and Tests, Unit 3 1 Job $ $ 0221 Operational Testing After Reassembly of Generating Unit, Unit 3 1 Job $ $ 0222 Painting Turbine Components, Unit 3 1 Job $ $

Painting Generator Cover Plates, Hand Rails, Exciter Housing, Oil Head Chambers, Unit 3 1 Job $ $

0224 On-site Lead Based Paint Removal and Disposal, Unit 3 1 Job $ $ 0225 Clean and Visually Inspect Oil and Water Piping, Unit 3 1 Job $ $ 0226 Disposal of Existing Turbine Hub Grease, Unit 3 1 Job $ $ 0227 Supply Turbine Oil, Unit 3 7100 Gal $ $

0228 Drain, Clean, and Flush System, Unit 3 1 Job $ $

0229-0277 MECHANICAL WORK

Design, Manufacture, Test and Deliver 63,605 hp Kaplan Runner Assembly, Unit 3

Job

0230 Ship Turbine Shaft to and from Contractor's Shop, Unit 3 1 Job $ $ 0231 Ship Intermediate Shaft to and from Contractor's Shop, Unit 3 1 Job $ $

Ship Generator Shaft and Thrust Bearing Runner to and from Contractor's Shop, Unit 3

Job

Machine Turbine Shaft Flange Face as Needed for New Runner Hub and Boring for New Coupling Bolts, Unit 3

Job

Inspect, Ship, and Refurbish Upper Generator Guide Bearing Pads, Unit 3 1 Job $ $

0235 Inspect, Ship, and Refurbish Lower Generator Guide Bearing Pads, Unit 3 1 Job $ $

0236 Provide New Turbine Guide Bearing, Unit 3 1 Job $ $ 0237 Generator Thrust Bearing Phase 1 Inspection, Unit 3 1 Job $ $

Inspect and Refurbish Air Breaker, Air Depression Valve, Draft Tube and Scroll Case Unwatering Valve and Check Valve Assemblies, Unit 3 1 Job $ $

0239 Refurbish Wicket Gate Servomotors, Unit 3 1 Job $ $ 0240 Inspect and Refurbish Existing Wicket Gates, Unit 3 1 Job $ $

Provide New Greased Bushings/Bearing Plate for Wicket Gate Linkage, Operating Mechanism, Gate Stem, Wicket Gate Servos and Vacuum Valve, Unit 3 1 Job $ $

0242 Wicket Gate Operating Mechanism Refurbishment, Unit 3 1 Job $ $

Provide a Pneumatic Shear Pin Detection System with Alarms, Unit 3 1 Job $ $

0244 Provide One Set of Shear Pins, Unit 3 1 Job $ $ 0245 Stay Ring Inspection, Unit 3 1 Job $ $

0246 Head Covers and Facing Plate Inspection and Refurbishment, Unit 3 1 Job $ $

Machining of Stay Ring Mounting Flange and Surface for Outer Head Cover, Unit 3 1 Job $ $

Bottom Ring (Top of Discharge Ring) and Facing Plate Inspection and Refurbishment, Unit 3 1 Job $ $

0249 Operating Ring Refurbishment, Unit 3 1 Job $ $

Line Bore Wicket Gate Stem Bushing Housings. Upper 2 sets of bushings shop bored and lower set field bored, Unit 3 1 Job $ $

0251 Provide New Packing Box, Gland, and Lantern, Unit 3 1 Job $ $ 0252 Provide Shaft Sleeve, Unit 3 1 Job $ $ 0253 Installation of Discharge Ring Anchors: 435, Unit 3 1 Job $ $ 0254 First 10 Cubic Feet of Epoxy, Unit 3 1 EA $ $ 0255 Provide Automatic Grease System, Unit 3 1 Job $ $ 0256 Provide Turbine Guide Bearing Oil System, Unit 3 1 Job $ $ 0257 Provide Head Cover Drainage Pumps System, Unit 3 1 Job $ $ 0258 Design and Provide Thrust Bearing Oil Coolers, Unit 3 1 Job $ $ 0259 HPOIS, Unit 3 1 Job $ $ 0260 Brake and Jack System Replacement, Unit 3 1 Job $ $ 0261 Brake Ring Field Inspection, Unit 3 1 Job $ $ 0262 New Static Oil Head System, Unit 3 1 Job $ $ 0263 Piezometer Tap Inspection and Surface Treatment, Unit 3 1 Job $ $ 0264 Discharge Ring 48" Weld Overlay and Machining, Unit 3 1 Job $ $

Blade Servomotor Refurbishment including Honing for Cast Iron Rings, Unit 3 1 Job $ $

0266 Turbine Guide Bearing Cover, Unit 3 1 Job $ $

Provide New Inner, Intermediate, and Outer Head Cover flange coupling bolts (horizontal and vertical), Unit 3 1 Job $ $

0268 Runner Leakage Detection System, Unit 3 1 Job $ $ 0269 Scroll Case Man Door Refurbishment, Unit 3 1 Job $ $

Provide New Draft Tube Man Door and Refurbish Door Frame, Unit 3 1 Job $ $

0271 Intermediate Shaft Modifications, Unit 3 1 Job $ $ 0272 Machine Head Cover Flanges in Shop, Unit 3 1 Job $ $ 0273-0277 Reserved

0278-0297 ELECTRICAL WORK

Furnish Complete Set Of Stator Coils Including Supplies and Accessories For A Complete New Winding Including Factory Testing, Unit 3 1 Job $ $

0279 Reserved 1 Job $ $

Furnish production run coils for and perform voltage endurance testing of production run coils, Unit 3 1 Job $ $

0281 Furnish Spare Parts, Unit 3 1 Job $ $ 0282 Removing Abandoned Rotating Exciter Parts, Unit 3 1 Job $ $ 0283 Furnish and Install New Stator Core, Unit 3 1 Job $ $ 0284 Install and Test New Stator Winding, Unit 3 1 Job $ $ 0285 Furnish and Install New Generator Terminal Box, Unit 3 1 Job $ $

0286 Rewire Turbine Pit and Generator, Unit 3 1 Job $ $ 0287 Reserved 1 Job $ $

Remove, Furnish and Install Rotor Field Pole Assemblies with Class F Insulation, Unit 3 1 Job $ $

Furnish and Install Generator Potential Transformers and Surge Arresters, Unit 3 1 Job $ $

Furnish and Install General Field Wiring, RTDs, Conduit, Gauges, and Switches, Unit 3 1 Job $ $

Furnish and Install Complete New Machine Condition Monitoring System, Unit 3 1 Job $ $

0292-0297 Reserved

0298-0327 CONTRACT OPTIONS

0298 Generator Thrust Bearing Phase 2 Inspection, Unit 3 (OPTION) 1 Job $ $

Shipment and Refurbish Thrust Bearing Shoes, Including Babbitting, Machining, GENMAT Spacers, and Backside Machining, Unit 3 (OPTION) 1 Job $ $

0300 Refurbish Generator Shaft at Contractor's Shop, Unit 3 (OPTION) 1 Job $ $

Resurface Thrust Bearing Runner on Generator Shaft, Unit 3 (OPTION) 1 Job $ $

0302 Reserved

Blade Servomotor Machining for Cast Iron Rings below Piston, Unit 3 (OPTION) 1 Job $ $

0304 Provide New Generator Air Coolers, Unit 3 (OPTION) 1 Job $ $

Shipment and Refurbishment of Thrust Bearing Runner Including Resurface Running Face, Resurface Backside, Split Face Work, Furnish Keys and Split Bolts/Hardware, Unit 3 (OPTION) 1 Job $ $

0306 Chrome Plate Gate Servo Piston Rod, Unit 3 (OPTION) 1 Job $ $ 0307 Brake Ring Refurbishment, Unit 3 (OPTION) 1 Job $ $ 0308 Reserved 0309 Reserved 0310 Reserved 0311 Reserved

Miscellaneous Parts and Materials Including Transportation, Unit 3 (OPTION) 1 Job NTE $

0313 Discharge Ring Insert, Unit 3 (OPTION) 1 Job $ $ 0314 Replacement Wicket Gate End Faces (OPTION) 1 Job $ $ 0315 Reserved

Head Cover Sealing Flanges O-Ring Groove Modification, Unit 3 (OPTION) 1 Job $ $

0317 Reserved 0318 Restore Wicket Gate Servomotor Head Spigot Fit, Unit 3(OPTION) 1 Job $ $ 0319 Machining Below Shaft Sleeve, Unit 3 (OPTION) 1 Job $ $ 0320 Reserved 0321 Reserved 0322 Reserved 0323 Wicket Gate Servomotor Bore Machining, Unit 3 (OPTION) 1 Job $ $

Provide Blade Servomotor Piston Cap and Fasteners, Unit 3

0325-0327 Reserved $ $

Unit 2: Base

Item No.

Description

Est.

Qty. UOM

Unit Price Amount

BASE WORK: UNIT 2

0328-0338 SITE WORK AND STRUCTURAL

Disassemble Hydraulic Turbine/Generator Unit and Inspect Components, Unit 2 1 Job $ $

Reassemble Generating Unit with New Runner and Components, Unit 2 1 Job $ $

0330 Pre-Disassembly Measurements and Tests, Unit 2 1 Job $ $

Operational Testing After Reassembly of Generating Unit, Unit 2 1 Job $ $

0332 Painting Turbine Components, Unit 2 1 Job $ $

Painting Generator Cover Plates, Hand Rails, Exciter Housing, Oil Head Chambers, Unit 2 1 Job $ $

0334 On-site Lead Based Paint Removal and Disposal, Unit 2 1 Job $ $ 0335 Clean and Visually Inspect Oil and Water Piping, Unit 2 1 Job $ $ 0336 Disposal of Existing Turbine Hub Grease, Unit 2 1 Job $ $ 0337 Supply Turbine Oil, Unit 2 7100 Gal $ $

0338 Drain, Clean, and Flush System, Unit 2 1 Job $ $

BASE WORK: UNIT 2

0339-0387 MECHANICAL WORK

Design, Manufacture, Test and Deliver 63,605 hp Kaplan Runner Assembly, Unit 2

Job

0340 Ship Turbine Shaft to and from Contractor's Shop, Unit 2 1 Job $ $ 0341 Ship Intermediate Shaft to and from Contractor's Shop, Unit 2 1 Job $ $

Ship Generator Shaft and Thrust Bearing Runner to and from Contractor's Shop, Unit 2

Job

Machine Turbine Shaft Flange Face as Needed for New Runner Hub and Boring for New Coupling Bolts, Unit 2

Job

Inspect, Ship and Refurbish Upper Generator Guide Bearing Pads, Unit 2 1 Job $ $

Inspect, Ship, and Refurbish Lower Generator Guide Bearing Pads, Unit 2 1 Job $ $

0346 Provide New Turbine Guide Bearing, Unit 2 1 Job $ $ 0347 Generator Thrust Bearing Phase 1 Inspection, Unit 2 1 Job $ $

Inspect and Refurbish Air Breaker, Air Depression Valve, Draft Tube and Scroll Case Unwatering Valve and Check Valve Assemblies, Unit 2 1 Job $ $

0349 Refurbish Wicket Gate Servomotors, Unit 2 1 Job $ $ 0350 Inspect and Refurbish Existing Wicket Gates, Unit 2 1 Job $ $

Provide New Greased Bushings/Bearing Plate for Wicket Gate Linkage, Operating Mechanism, Gate Stem, Wicket Gate Servos and Vacuum Valve, Unit 2 1 Job $ $

0352 Wicket Gate Operating Mechanism Refurbishment, Unit 2 1 Job $ $

Provide a Pneumatic Shear Pin Detection System with Alarms, Unit 2 1 Job $ $

0354 Provide One Set of Shear Pins, Unit 2 1 Job $ $ 0355 Stay Ring Inspection, Unit 2 1 Job $ $

Head Covers and Facing Plate Inspection and Refurbishment, Unit 2 1 Job $ $

Machining of Stay Ring Mounting Flange and Surface for Outer Head Cover, Unit 2 1 Job $ $

Bottom Ring (Top of Discharge Ring) and Facing Plate Inspection and Refurbishment, Unit 2 1 Job $ $

0359 Operating Ring Refurbishment, Unit 2 1 Job $ $

Line Bore Wicket Gate Stem Bushing Housings. Upper 2 sets of bushings shop bored and lower set field bored, Unit 2 1 Job $ $

0361 Provide New Packing Box, Gland, and Lantern, Unit 2 1 Job $ $ 0362 Provide Shaft Sleeve, Unit 2 1 Job $ $ 0363 Installation of Discharge Ring Anchors: 435, Unit 2 1 Job $ $ 0364 First 10 Cubic Feet of Epoxy, Unit 2 1 EA $ $ 0365 Provide Automatic Grease System, Unit 2 1 Job $ $ 0366 Provide Turbine Guide Bearing Oil System, Unit 2 1 Job $ $ 0367 Replace Head Cover Drainage Pumps System, Unit 2 1 Job $ $ 0368 Design and Provide Thrust Bearing Oil Coolers, Unit 2 1 Job $ $ 0369 HPOIS, Unit 2 1 Job $ $ 0370 Brake and Jack System Replacement, Unit 2 1 Job $ $ 0371 Brake Ring Field Inspection, Unit 2 1 Job $ $ 0372 New Static Oil Head System, Unit 2 1 Job $ $ 0373 Piezometer Tap Inspection and Surface Treatment, Unit 2 1 Job $ $ 0374 Discharge Ring 48" Weld Overlay and Machining, Unit 2 1 Job $ $

Blade Servomotor Refurbishment including Honing for Cast Iron Rings, Unit 2 1 Job $ $

0376 Turbine Guide Bearing Cover, Unit 2 1 Job $ $

Provide New Inner, Intermediate, and Outer Head Cover Flange Coupling Bolts (horizontal and vertical), Unit 2 1 Job $ $

0378 Runner Leakage Detection System, Unit 2 1 Job $ $ 0379 Scroll Case Man Door Refurbishment, Unit 2 1 Job $ $

Provide New Draft Tube Man Door and Refurbish Door Frame, Unit 2 1 Job $ $

0381 Intermediate Shaft Modifications, Unit 2 1 Job $ $ 0382 Machine Head Cover Flanges in Shop, Unit 2 1 Job $ $ 0383-0387 Reserved

BASE WORK: UNIT 2

0388-0403 ELECTRICAL WORK

Furnish Complete Set Of Stator Coils Including Supplies and Accessories For A Complete New Winding Including Factory Testing, Unit 2 1 Job $ $

0389 Reserved 1 Job $ $

Furnish production run coils for and perform voltage endurance testing of production run coils, Unit 2 1 Job $ $

0391 Furnish Spare Parts, Unit 2 1 Job $ $ 0392 Removing Abandoned Rotating Exciter Parts, Unit 2 1 Job $ $ 0393 Furnish and Install New Stator Core, Unit 2 1 Job $ $ 0394 Install and Test New Stator Winding, Unit 2 1 Job $ $ 0395 Furnish and Install New Generator Terminal Box, Unit 2 1 Job $ $ 0396 Rewire Turbine Pit and Generator, Unit 2 1 Job $ $ 0397 Reserved 1 Job $ $

Remove, Furnish and Install Rotor Field Pole Assemblies with Class F Insulation, Unit 2 1 Job $ $

Furnish and Install Generator Potential Transformers and Surge Arresters, Unit 2 1 Job $ $

Furnish and Install General Field Wiring, RTDs, Conduit, Gauges, and Switches, Unit 2 1 Job $ $

Furnish and Install Complete New Machine Condition Monitoring System, Unit 2 1 Job $ $

0402-0403 Reserved $ $

0404-0437 CONTRACT OPTIONS

0404 Generator Thrust Bearing Phase 2 Inspection, Unit 2 (OPTION) 1 Job $ $

Shipment and Refurbish Thrust Bearing Shoes, Including Babbitting, Machining, GENMAT Spacers, and Backside Machining, Unit 2 (OPTION) 1 Job $ $

Refurbish Generator Shaft at Contractor's Shop, Unit 2 (OPTION) 1 Job $ $

Resurface Thrust Bearing Runner on Generator Shaft, Unit 2 (OPTION) 1 Job $ $

0408 Reserved

Blade Servomotor Machining for Cast Iron Rings below Piston, Unit 2 (OPTION) 1 Job $ $

0410 Provide New Generator Air Coolers, Unit 2 (OPTION) 1 Job $ $

Shipment and Refurbishment of Thrust Bearing Runner Including Resurface Running Face, Resurface Backside, Split Face Work, Furnish Keys and Split Bolts/Hardware, Unit 2 (OPTION) 1 Job $ $

0412 Chrome Plate Gate Servo Piston Rod, Unit 2 (OPTION) 1 Job $ $ 0413 Brake Ring Refurbishment, Unit 2 (OPTION) 1 Job $ $ 0414 Reserved 0415 Reserved 0416 Reserved

Miscellaneous Parts and Materials Including Transportation, Unit 2 (OPTION) 1 Job NTE

0418 Discharge Ring Insert, Unit 2 (OPTION) 1 Job $ $ 0419 Replacement Wicket Gate End Faces (OPTION) 1 Job $ $ 0420 Reserved

Head Cover Sealing Flanges O-Ring Groove Modification, Unit 2 (OPTION) 1 Job $ $

0422 Reserved

Restore Wicket Gate Servomotor Head Spigot Fit, Unit 2 (OPTION) 1 Job $ $

0424 Machining Below Shaft Sleeve, Unit 2 (OPTION) 1 Job $ $ 0425 Reserved 1 0426 Reserved 0427 Reserved 0428 Wicket Gate Servomotor Bore Machining, Unit 2 (OPTION) 1 Job $ $

Provide Blade Servomotor Piston Cap and Fasteners, Unit 2

0430-0437 Reserved $ $

Unit 1: Base

Est.

Qty. UOM

Unit Price Amount

BASE WORK: UNIT 1

0438-0452 SITE WORK AND STRUCTURAL

Disassemble Hydraulic Turbine/Generator Unit and Inspect Components, Unit 1 1 Job $ $

Reassemble Generating Unit with New Runner and Components, Unit 1 1 Job $ $

0440 Pre-Disassembly Measurements and Tests, Unit 1 1 Job $ $

Operational Testing After Reassembly of Generating Unit, Unit 1 1 Job $ $

0442 Painting Turbine Components, Unit 1 1 Job $ $

Painting Generator Cover Plates, Hand Rails, Exciter Housing, Oil Head Chambers, Unit 1 and Miscellaneous 1 Job $ $

0444 On-site Lead Based Paint Removal and Disposal, Unit 1 1 Job $ $ 0445 Clean and Visually Inspect Oil and Water Piping, Unit 1 1 Job $ $ 0446 Disposal of Existing Turbine Hub Grease, Unit 1 1 Job $ $ 0447 Supply Turbine Oil, Unit 1 7100 Gal $ $

0448 Drain, Clean, and Flush System, Unit 1 1 Job $ $

0449-0452 Reserved $ $

BASE WORK: UNIT 1

0453-0498 MECHANICAL WORK

Design, Manufacture, Test and Deliver 63,605 hp Kaplan Runner Assembly, Unit 1

Job

0454 Ship Turbine Shaft to and from Contractor's Shop, Unit 1 1 Job $ $

Ship Intermediate Shaft to and from Contractor's Shop, Unit

Job

Ship Generator Shaft and Thrust Bearing Runner to and from Contractor's Shop, Unit 1

Job

Machine Turbine Shaft Flange Face as Needed for New Runner Hub and Boring for New Coupling Bolts, Unit 1

Job

Inspect, Ship, and Refurbish Upper Generator Guide Bearing Pads, Unit 1 1 Job $ $

0459 Inspect, Ship, and Refurbish Lower Generator Guide Bearing Pads, Unit 1 1 Job $ $

0460 Provide New Turbine Guide Bearing, Unit 1 1 Job $ $ 0461 Generator Thrust Bearing Phase 1 Inspection, Unit 1 1 Job $ $

Inspect and Refurbish Air Breaker, Air Depression Valve, Draft Tube and Scroll Case Unwatering Valve and Check Valve Assemblies, Unit 1 1 Job $ $

0463 Refurbish Wicket Gate Servomotors, Unit 1 1 Job $ $ 0464 Inspect and Refurbish Existing Wicket Gates, Unit 1 1 Job $ $

Provide New Greased Bushings/Bearing Plate for Wicket Gate Linkage, Operating Mechanism, Gate Stem, Wicket Gate Servos and Vacuum Valve, Unit 1 1 Job $ $

0466 Wicket Gate Operating Mechanism Refurbishment, Unit 1 1 Job $ $

Provide a Pneumatic Shear Pin Detection System with Alarms, Unit 1 1 Job $ $

0468 Provide One Set of Shear Pins, Unit 1 0469 Stay Ring Inspection, Unit 1 1 Job $ $

Head Covers and Facing Plate Inspection and Refurbishment, Unit 1 1 Job $ $

Machining of Stay Ring Mounting Flange and Surface for Outer Head Cover, Unit 1 1 Job $ $

Bottom Ring (Top of Discharge Ring) and Facing Plate Inspection and Refurbishment, Unit 1 1 Job $ $

0473 Operating Ring Refurbishment, Unit 1 1 Job $ $

Line Bore Wicket Gate Stem Bushing Housings. Upper 2 sets of Bushings Shop Bored and Lower Set Field Bored, Unit 1 1 Job $ $

0475 Provide New Packing Box, Gland, and Lantern, Unit 1 1 Job $ $ 0476 Provide Shaft Sleeve, Unit 1 1 Job $ $ 0477 Installation of Discharge Ring Anchors: 435, Unit 1 1 Job $ $ 0478 First 10 Cubic Feet of Epoxy, Unit 1 1 EA $ $ 0479 Provide Automatic Grease System, Unit 1 1 Job $ $ 0480 Provide Turbine Guide Bearing Oil System, Unit 1 1 Job $ $ 0481 Provide Head Cover Drainage Pumps System, Unit 1 1 Job $ $ 0482 Design and Provide Thrust Bearing Oil Coolers, Unit 1 1 Job $ $ 0483 HPOIS, Unit 1 1 Job $ $ 0484 Brake and Jack System Replacement, Unit 1 1 Job $ $ 0485 Brake Ring Field Inspection, Unit 1 1 Job $ $ 0486 New Static Oil Head System, Unit 1 1 Job $ $ 0487 Piezometer Tap Inspection and Surface Treatment, Unit 1 1 Job $ $ 0488 Discharge Ring 48" Weld Overlay and Machining, Unit 1 1 Job $ $

Blade Servomotor Refurbishment including Honing for Cast Iron Rings, Unit 1 1 Job $ $

0490 Turbine Guide Bearing Cover, Unit 1 1 Job $ $

Provide New Inner, Intermediate, and Outer Head Cover flange coupling bolts (horizontal and vertical), Unit 1 1 Job $ $

0492 Runner Leakage Detection System, Unit 1 1 Job $ $ 0493 Scroll Case Man Door Refurbishment, Unit 1

Provide New Draft Tube Man Door and Refurbish Door Frame, Unit 1

1 Job $ $

0495 Intermediate Shaft Modifications, Unit 1 1 Job $ $ 0496 Machine Head Cover Flanges in Shop, Unit 1 1 Job $ $ 0497 Reserved 0498 Reserved

BASE WORK: UNIT 1

0499-0507 ELECTRICAL WORK

0499 Furnish Spare Parts, Unit 1 1 Job $ $ 0500 Removing Abandoned Rotating Exciter Parts, Unit 1 1 Job $ $ 0501 Furnish and Install New Generator Terminal Box, Unit 1 1 Job $ $ 0502 Rewire Turbine Pit and Generator, Unit 1 1 Job $ $

Furnish and Install Generator Potential Transformers and Surge Arresters, Unit 1 1 Job $ $

Furnish and Install General Field Wiring, RTDs, Conduit, Gauges, and Switches, Unit 1 1 Job $ $

Furnish and Install Complete New Machine Condition Monitoring System, Unit 1 1 Job $ $

Remove, Furnish, and Install 87 Rotor Field Pole Assemblies with Class F Insulation, Unit 1 1 Job $ $

0507 Reserved

0508-0537 CONTRACT OPTIONS

0508 Generator Thrust Bearing Phase 2 Inspection Unit 1 (OPTION) 1 Job $ $

Shipment and Refurbish Thrust Bearing Shoes, Including Babbitting, Machining, GENMAT Spacers, and Backside Machining, Unit 1 (OPTION) 1 Job $ $

Refurbish Generator Shaft at Contractor's Shop, Unit 1 (OPTION) 1 Job $ $

Resurface Thrust Bearing Runner on Generator Shaft, Unit 1 (OPTION) 1 Job $ $

0512 Reserved

Blade Servomotor Machining for Cast Iron Rings below Piston, Unit 1 (OPTION) 1 Job $ $

0514 Provide New Generator Air Coolers, Unit 1 (OPTION) 1 Job $ $

Shipment and Refurbishment of Thrust Bearing Runner Including Resurface Running Face, Resurface Backside, Split Face Work, Furnish Keys and Split Bolts/Hardware, Unit 1 (OPTION) 1 Job $ $

0516 Chrome Plate Gate Servo Piston Rod, Unit 1 (OPTION) 1 Job $ $ 0517 Brake Ring Refurbishment, Unit 1 (OPTION) 1 Job $ $

0518 Reserved 0519 Reserved 0520 Reserved 0521 Reserved

Miscellaneous Parts and Materials Including Transportation, Unit 1 (OPTION) 1 Job NTE

0523 Discharge Ring Insert, Unit 1 (OPTION) 1 Job $ $ 0524 Replacement Wicket Gate End Faces (OPTION) 1 Job $ $ 0525 Reserved

Head Cover Sealing Flanges O-Ring Groove Modification, Unit 1 (OPTION) 1 Job $ $

0527 Reserved

Restore Wicket Gate Servomotor Head Spigot Fit, Unit 1 (OPTION) 1 Job $ $

0529 Machining Below Shaft Sleeve, Unit 1 (OPTION) 1 Job $ $ 0530 Reserved 0531 Reserved 0532 Reserved

Wicket Gate Servomotor Bore Machining, Unit 1 (OPTION) 1 Job $ $

Provide Blade Servomotor Piston Cap and Fasteners, Unit 1

0535-0537 Reserved $ $

0538-0559 EXCESS WORK OPTION

Est.

Qty. UOM

Unit Price Amount

0538 Miscellaneous Welding (OPTION) 320 LBS $ $ 0539 Machinist Hire (OPTION) 320 HRS $ $ 0540 Electrician Hire (OPTION) 320 HRS $ $ 0541 Welding Services (OPTION) 320 HRS $ $ 0542 Painter Hire (OPTION) 200 HRS $ $ 0543 Other Skilled Craftsmen Hire (OPTION) 320 HRS $ $ 0544 General Laborer Hire (OPTION) 320 HRS $ $ 0545 Liquid Penetrant Method (OPTION) 160 HRS $ $ 0546 Magnetic Particle Method (OPTION) 160 HRS $ $ 0547 Ultrasonic Method (OPTION) 160 HRS $ $ 0548 Engineering Services (OPTION) 100 HRS $ $

0549 Weld Spraying (OPTION)

100 HRS $ $

Generator Thrust Bearing Phase 2 Inspection (OPTION) Spare 1 Job $ $

Shipment and Refurbish Thrust Bearing Shoes, Including Babbitting, Backside Machining, Spare (OPTION) 1 Job $ $

0552 Shipment of Thrust Bearing Runner, Spare (OPTION) 1 Job $ $

Shipment and Refurbishment of Thrust Bearing Runner Including Resurface Running Face, Resurface Backside, Split Face Work, Furnish Keys and Split Bolts/ Hardware, Spare (OPTION) 1 Job $ $

0554 Furnish Mandrel and Clamps for Shaft Sleeve (OPTION) 1 Job $ $ 0555 Reserved

Additional Turbine Shaft Packing Box, Gland, and Lantern Ring (OPTION) 1 Job $ $

0557 Four (4) Additional Spare Shaft Sleeves (OPTION) 1 Job $ $

Refurbish Spare Upper Generator Guide Bearing Pads (OPTION) 1 Job $ $

Refurbish Spare Lower Generator Guide Bearing Pads

INSTRUCTIONS TO BIDDERS

INSTRUCTIONS, CONDITIONS & NOTICES TO BIDDERS

GENERAL REQUIREMENTS

1. Intent: The intent of this solicitation is to award one (1) contract for the Barkley Power Plant Turbine Generator Rehabilitation construction project, Kuttawa, KY.

2. Disclosure of Magnitude of Construction Project: The estimated magnitude of this requirement is between $25,000,000 and $100,000,000.

3. Basis of Selection of Award: Award shall be made to the lowest priced bidder who is determined to be responsive and responsible. See Federal Acquisition Regulation (FAR) 52.214-19, Contract Award—Sealed Bidding—Construction, for more information. In accordance with FAR 52.217-5, Evaluations of Options, the Government intends to evaluate bids for award purposes by adding the total price for all of the options to the total price for the basic requirement. Any, some or all of the options may be exercised at any time but no later than 5 calendar days of submittal approval that triggers the need for an option.

4. Type of Contract: The Government intends to award one (1) firm fixed-price construction contract.

5. Who May Submit: This procurement is full and open.

6. North American Industry Classification System (NAICS) Code and Small Business Size Standard: The NAICS code for this project is 237990, Other Heavy and Civil Engineering Construction, with a size standard of $39,500,000.

7. Specifications and Drawings: Specifications and Drawings will be provided as separate files and will be available on beta SAM. See the complete drawings and specification package located at www.beta.sam.gov

The Specifications and Drawings are part of the solicitation/contract and shall be considered in that respect (see Defense Federal Acquisition Regulation Supplement (DFARS) 252.236-7001, Contract Drawings and Specifications).

8. Pre-Bid Site Visit: An organized site visit has been scheduled to occur during the solicitation period. Bidders should inspect the job site prior to submitting a bid. Bidders should take such other steps as may be reasonably necessary to ascertain the nature and location of the work and the general and local conditions that can affect the work or the cost thereof. Failure to do so will not relieve bidders from the responsibility for properly estimating the difficulty or cost of successfully performing the work. The Government assumes no responsibility for any understanding or representations concerning conditions made by any of its officers, agents or employees, unless included in the solicitation, the specifications or related documents. Please refer to FAR 52.236-27 Alt I, Site Visit (Construction) incorporated by full text in this solicitation, for information pertaining to the scheduled site visit.

REGISTRATION: Only registered persons will be permitted to attend the site visit. In addition to the information below, please also provide your firm’s name, firm’s CAGE and/or Unique Entity Identifier (formerly known as DUNS) number, and name and position title of primary point-of-contact and their telephone number and email address. Please provide this information via email to kristal.r.jones@usace.army.mil.

Contractors and/or potential contractors wishing to attend a pre-bid meeting held at or in LRN restricted/controlled areas (such as a Power Plant or Navigation Lock) shall submit a Nashville District (LRN) Security Access Form to the Contract Specialist two (2) business days prior to the site visit or meeting. If submitting the document in less than five business days, the bidder may not receive approval for participation. The Contract Specialist will notify the Contractor if the request is approved or denied. Any pre-bid meeting which will cover anything other than public domain information shall be limited to U.S. Citizens, except under unique circumstances.

U.S. CITIZENS: The bidder shall submit a Nashville District Corps of Engineers U.S. Citizen Pre-Bid and/or Site Visit Request Form to the LRN Point of Contact, Contract Specialist Kristal Jones, no later than two (2) business days prior to the site visit. If submitting the document in less than five business (5) days, the bidder may not receive approval for participation. The LRN POC will notify the individual(s) if the request is approved or denied.

The Security Access Form and guidance is available as a pdf attachment on www.beta.sam.gov with this solicitation and is titled Pre-Bid Meeting and/or Site Visit Request Form.

FOREIGN NATIONALS (FNs): All non-U.S. Citizens, including permanent residents wishing to attend the site visit must be approved in advance. FNs wishing to attend a site visit shall submit a completed Nashville District Corps of Engineers Foreign National Pre-Bid Meeting Request Form and legible color copies of two (2) of the following documents: Passport (unexpired or expired), Certificate of U.S. Citizenship (INS Form N-560 04 N- 561), Certificate of Naturalization (INS Form N-550 or N-570), unexpired foreign Passport with I- 551 stamp or attached INS Form I-94 indicating unexpired employment authorization, an Alien Registration Receipt Card with photo (INS Form I-151 or I-551), unexpired Temporary Resident Card (INS Form I-688), unexpired Employment Authorization Card (INS Form I- 688A), unexpired Reentry Permit (INS Form I-327), unexpired Refugee Travel Document (INS Form I-571), or unexpired Employment Authorization Documentation issued by the INS which contains a photograph (INS Form I-688B) to the LRN Point of Contact, Contract Specialist Kristal Jones . These documents must be submitted two (2) weeks prior to the site visit unless otherwise stated herein. FN requests require approval at the Headquarters U.S. Army Corps of Engineers (HQUSACE) level. Exceptions will be considered on a case by case basis but will be limited. The form is available as a pdf attachment on www.beta.sam.gov with this solicitation and is titled Foreign National Pre-Bid Meeting Request Form.

Due to the social distancing guidelines provided by the Centers for Disease Control and Prevention (CDC) because of COVID-19, this site visit will be a video conference presentation that will be held on Thursday, May 28, 2020 at 10:00 a.m. Central Time.

In order to participate in the virtual site visit, contractors must submit a site visit request form for each company representative. Site visit request forms can be found at www.beta.sam.gov under the Attachments section of this solicitation. Companies with foreign national representatives must submit a Foreign National Site Vist Request Form, which can found at www.beta.sam.gov under the Attachments section of this solicitation. All site visit request forms, including site visit request forms for foreign nationals, must be submitted by Thursday, May 21, 2020 at 3:00 p.m. Central Time to Contract Specialist Kristal Jones at the aforementioned e-mail address.

Upon approval of submited site visit request forms, contractors will receive via e-mail the site visit agenda, which will include teleconference and Defense Visual Information Distribution Service (DVIDS) access information, and photographs prior to the virtual site visit pre-bid meeting.

Physical site visits are tentatively scheduled to be held on Thursday, June 18, 2020 and Friday, June 19, 2020 in order for bidders to see and access a de-watered unit. Please note due to the social distancing guidelines provided by the CDC, bidders will only be allowed to have no more than two (2) company representatives to participate in the physical site visit.

9. POINT-OF-CONTACT: For questions and /or concerns regarding the virtual pre-bid meeting site visit, please contact Contract Specialist Kristal Jones via email at the address referenced above.

These will be the only site visits for this project. If you miss the scheduled site visits, no other arrangements will be made due to personnel and time restrictions.

10. POC for Communication/Questions: Any communications regarding this procurement must be made in writing to the Nashville Contracting Branch, Attn: Kristal Jones at email kristal.r.jones@usace.army.mil.

Inquiries must identify the solicitation number, the requestor’s company name, address, email address, and telephone number to include area code.

Phone calls or requests to arrange meetings at the Nashville District during the solicitation period to discuss project requirements or company’s capabilities are highly discouraged and will not be scheduled.

QUESTIONS: Questions regarding the solicitation must be submitted to Kristal Jones via email at kristal.r.jones@usace.army.mil no later than Friday, June 26, 2020 at 11:00 a.m. Central Time.

11. Amendments Prior to Date Set for Closing of Invitation for Bid (IFB). The right is reserved as the interest of the Government may require, to revise or amend the specifications or drawings or both prior to the date set for submission of bid. Such revisions and amendments, if any will be announced by an amendment or amendments to this IFB. If the revisions and amendments are of a nature which requires material changes in quantities or prices proposed or both, the date set for receipt of bids may be postponed by such number of days as in the opinion of the issuing officer will enable bidders to revise their bid. In such cases, the amendment will include an announcement of the new date for receipt of bid.

12. NOTICE TO BIDDER: Use of Class I Ozone-Depleting Substances

a. In accordance with Section 326 of P.L. 102-484, the Government is prohibited from awarding any contract which includes a specification or standard that requires the use of a Class I ozone-depleting substance (ODS) identified in Section 601(a) of the Clean Air Act, (42 U.S.C 767a(a)), or that can be met only through the use of such a substance unless such use has been approved, on an individual basis, by a senior acquisitions official who determines that there is no suitable substitute available.

b. To comply with this statute, the Government has conducted a best effort screening of the specifications and standards associated with this acquisition to determine whether they contain any ODS requirements. This requirement has no relationship to ODSs.

c. If the bidder possesses any special knowledge about any other ODSs required directly or indirectly at any level of contract performance, the U.S. Army would appreciate if such information were surfaced to the Contracting Officer for appropriate action. To preclude delay to the procurement, the bidder should provide any information as soon as possible after release of this IFB and prior to the submission of bids to the extent practicable. It should be understood that there is no obligation on the bidder to comply with the request and that no compensation can be provided for doing so.

13. DEFINITIVE RESPONSIBILITY CRITERIA (DRC)

a. To ensure award is made to a responsible bidder, a determination of responsibility will be conducted.

As part of this responsibility determination, the Contracting Officer will utilize the guidance contained in FAR Subpart 9.1, Responsible Prospective Contractors. In accordance with FAR 9.104-1, to be determined responsible, a prospective contractor must:

(1) Have adequate financial resources to perform the contract, or the ability to obtain them;

(2) Be able to comply with the required or proposed delivery or performance schedule, taking into consideration all existing commercial and governmental business commitments;

(3) Have a satisfactory performance record, similar in scope and magnitude of that stated in the contract requirement;

(4) Have a satisfactory record of integrity and business ethics;

(5) Have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors);

(6) Have the necessary production, construction, and technical equipment and facilities, or the ability to obtain them; and

(7) Be otherwise qualified and eligible to receive an award under applicable laws and regulations.

b. Definitive Responsibility Criteria: In addition to examining the criteria in FAR 9.104-1, the Contracting

Officer will also examine whether the low bidder can meet the requirements of the four (4) definitive responsibility criteria. The apparent low bidder will be required to provide evidence showing their company meets the following experience requirements.

1. The following requirements must be self-performed as a prime or a sub-contractor:

a. A minimum of (3) projects completed within the last twenty (20) years, or two (2) projects completed in the last twenty (20) years and one (1) project that is currently substantially complete, that demonstrate design and scale model testing of new Kaplan runners.