121-123_PWS_Enclosure_A_Bid_Set_Plans.pdf

PDF 7 MB Posted Aug 8, 2018

Attached to: MODERNIZATION OF BILLETING BUILDINGS 121&123
Solicitation number: W912LR18B0003
Issued by: Department of the Army Puerto Rico Army National Guard

About this file

From the source

Enclosure A Bid Set Plans

View the file

Other files

File	Type	Posted
SF-1409__Offer_Evaluation_Signed_-_W912LR18B00030001.pdf	PDF	Sep 28, 2018
SF-1409__Offer_Evaluation_-_W912LR18B00030001.pdf	PDF	Sep 27, 2018
Questions_Received_FATA_Billeting_121_123_Modernization_with_Responses.pdf	PDF	Sep 7, 2018
Questions_Received_FATA_Billeting_121_123_Modernization_with_Responses.pdf	PDF	Sep 7, 2018
W912LR18B0003_Pre_Bid_Conference.pdf	PDF	Aug 22, 2018
Attendance_List_W912LR18B003.pdf	PDF	Aug 22, 2018
121-123_Performance_Work_Statement_(PWS).pdf	PDF	Aug 8, 2018
121-123_PWS_Enclosure_B_Tech_Specs.pdf	PDF	Aug 8, 2018
W912LR18B00030001_Modernization_of_Building_121_&_123.pdf	PDF	Aug 8, 2018
W912LR18B0003_Modernization_of_Building_121_&_123.pdf	PDF	Aug 8, 2018

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

L D

I C

MODERNIZATION OF BILLETING BUILDINGS 121&123

JUANA DIAZ, PUERTO RICO

FORT ALLEN (FATC)

BG ISABELO RIVERA

LOCATION PLAN

CPT ALEJANDRO FONSECA, P.E.

REVISIONS

MAJ RAUL CORDERO

BID SET

PUERTO RICO ARMY NATIONAL GUARD

CONSTRUCTION AND FACILITIES MANAGEMENT OFFICE

SAN JUAN, PUERTO RICO

FY 2018

FLOOD PLAN

SITE

TOPOGRAPHIC PLAN

SITE

INDEX OF DRAWINGS

1 COVER SHEET

2 G-1 GENERAL NOTES

3 G-2 STAGING PLAN

4 C-1 UTILITY SITE PLAN (BUILDING 121)

5 C-2 UTILITY SITE PLAN (BUILDING 123)

6 C-3 PROPOSED UTILITY SITE PLAN DETAILS

7 A-1 EXISITING/ DEMOLITION FLOOR PLAN

8 A-2 EXISTING ELEVATIONS

9 A-3 PROPOSED FLOOR PLAN

10 A-4 PROPOSED ELEVATIONS

11 A-5 REFLECTED CEILING PLANS

12 A-6 ROOF PLAN

13 A-7 SCHEDULES, DETAILS

14 A-8 ENLARGED BATHROOM FLOOR PLAN, INT. ELEVATIONS

15 P-1 PROPOSED SANITARY AND WATER DISTRIBUTION PLAN

16 P-2 PLUMBING NOTES AND DETAILS

17 P-3 SANITARY AND WATER ISOMETRIC DIAGRAMS

18 M-1 PROPOSED A/C UNITS DISTRIBUTION PLAN

19 M-2 A/C NOTES AND DETAILS

20 E-1 PROPOSED LIGHTING DISTRIBUTION PLAN

21 E-2 PROPOSED POWER DISTRIBUTION PLAN

22 E-3 ELECTRICAL NOTES AND DETAILS

23 E-4 ELECTRICAL PANELS AND DETAILS

ELIZA BURGOS MARTINEZ, A.I..

AutoCAD SHX Text

PAVED POV PARKING

AutoCAD SHX Text

PAVED POV PARKING

AutoCAD SHX Text

PAVED POV PARKING

AutoCAD SHX Text

OVERHEAD ELECTRICAL LINE

AutoCAD SHX Text

R E V. N O. D A T E R E V. BY

AutoCAD SHX Text D E S C R I P T I O N S

AutoCAD SHX Text

ADJUTANT GENERAL OF PUERTO RICO

AutoCAD SHX Text

DESIGN:

AutoCAD SHX Text

REVISED BY:

AutoCAD SHX Text

SUPERVISOR, DESIGN & PROJECT MANAGEMENT BRANCH

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

PHASE:

AutoCAD SHX Text

STATE CONSTRUCTION & FACILITIES MANAGEMENT OFFICER

AutoCAD SHX Text

MAP: #72000CO765J , #72000C1230J - DATE: NOVEMBER 18, 2009

AutoCAD SHX Text X: 246885.7525 Y: 246105.8914

AutoCAD SHX Text

JUANA DIAZ QUADRANGLES (USGS 1982)

AutoCAD SHX Text

CFMO ARCHITECT - PRARNG

D E

R N

I Z

A T

I O

I L L E

T I N

U I L D

I N

F O

L E

A T

J U

A N

U E

R T

I C

I S

T I N

O L I T

I O

L E

V A

T I O

N S

A-2

AutoCAD SHX Text +17'-4"

AutoCAD SHX Text B.O. CEILING (Low point)

AutoCAD SHX Text +9'-2"

AutoCAD SHX Text

SECOND FLOOR

AutoCAD SHX Text 0'-0"

AutoCAD SHX Text F.F.E.

AutoCAD SHX Text

INT. F.F.E.

AutoCAD SHX Text

INT. F.F.E.

AutoCAD SHX Text

AutoCAD SHX Text +9'-2"

AutoCAD SHX Text

SECOND F.F.E.

AutoCAD SHX Text +4'-8"

AutoCAD SHX Text

LANDING

AutoCAD SHX Text 0'-0"

AutoCAD SHX Text F.F.E.

AutoCAD SHX Text

AutoCAD SHX Text +9'-2"

AutoCAD SHX Text

SECOND F.F.E.

AutoCAD SHX Text +4'-8"

AutoCAD SHX Text

LANDING

AutoCAD SHX Text 0'-0"

AutoCAD SHX Text F.F.E.

AutoCAD SHX Text

AutoCAD SHX Text +17'-4"

AutoCAD SHX Text B.O. CEILING (Low point)

AutoCAD SHX Text +9'-2"

AutoCAD SHX Text

SECOND FLOOR

AutoCAD SHX Text 0'-0"

AutoCAD SHX Text F.F.E.

AutoCAD SHX Text

DEMOLITION NOTES:

AutoCAD SHX Text REMOVE WATER FOUNTAIN. RETURN TO OWNER FOR FUTURE USE. REMOVE AND DISPOSE WINDOW TYPE A/C UNIT REMOVE AND DISPOSE ALUMINUM WINDOW REMOVE AND DISPOSE DOOR AND FRAME SAW CUT AND DEMO. FOR OPENING. REFER TO FLOOR PLAN FOR DIMENSION. REMOVE WALL EXHAUST EQUIPMENT PRESSURE WASH ROOF. PREPARE SURFACE FOR ELASTOMERIC PAINT FINISH. REPLACE ALL EXTERIOR LIGHTING FIXTURES. REFER TO ELECTRICAL PLANS. REMOVE METAL RAILING. REMOVE DECORATIVE BLOCK

AutoCAD SHX Text

EXISTING FRONT ELEVATION

AutoCAD SHX Text

SCALE 3/16" = 1'-0"

AutoCAD SHX Text

NO.

AutoCAD SHX Text

DATE

AutoCAD SHX Text R E V I S I O N S

AutoCAD SHX Text D E S C R I P T I O N

AutoCAD SHX Text

SHEET TITLE:

AutoCAD SHX Text

PROJECT:

AutoCAD SHX Text C A L L E G E N E R A L E S T E V E S #100 , S A N J U A N P U E R T O R I C O 00901 - 2104

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

DESIGN:

AutoCAD SHX Text

TOTAL SHEETS:

AutoCAD SHX Text

SHEET NAME:

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

ELIZA BURGOS, A.I.T.

AutoCAD SHX Text

A. PEDRAZA

AutoCAD SHX Text

DIRECTORATE OF ENGINEERING

AutoCAD SHX Text "I, ENG. ALEJANDRO FONSECA, P.E., LIC.19965, CERTIFY THAT I AM THE PROFESSIONAL WHO DESIGNS THESE PLANS. AND THE SUPLEMENTARIES SPECIFICATIONS. ALSO CERTIFY THAT UNDERSTAND THAT THESE PLANS AND SPECIFICATIONS COMPLY WITH THE APPLICABLE PROVISIONS OF THE REGULATIONS AND CODES OF AGENCIES, REGULATORY BOARD OR PUBLIC CORPORATION WITH JURISDICTION. ACKNOWLEDGE THAT ANY FALSE STATEMENT OR FALSIFICATION OF THE FACTS IS NOT MADE KNOWINGLY OR RECKLESSLY BY EITHER MYSELF, MY AGENTS OR EMPLOYEES, OR OTHERWTH MY KNOWLEDGE, THEY MAKE ME RESPONSABLE FOR ANY JUDICIAL AND DISCIPLINARY ACTION BY OIGPe AND OTHERS COMPETENT AUTHORITIES, INCLUDING BUT NOT LIMITEDTHE PARTICIPATION IN THE PROFESSIONAL CERTIFICATION PROCEDURE OF THE OIGPe"

AutoCAD SHX Text

SHEET:

AutoCAD SHX Text

CERTIFIED:

AutoCAD SHX Text

FY18

AutoCAD SHX Text

SUPERVISOR:

AutoCAD SHX Text

CPT. FONSECA, P.E.

AutoCAD SHX Text

NO.

AutoCAD SHX Text

DATE

AutoCAD SHX Text D E S C R I P T I O N

AutoCAD SHX Text

EXISTING LEFT ELEVATION

AutoCAD SHX Text

SCALE 3/16" = 1'-0"

AutoCAD SHX Text

EXISTING RIGHT ELEVATION

AutoCAD SHX Text

SCALE 3/16" = 1'-0"

AutoCAD SHX Text

EXISTING FRONT ELEVATION

SCALE 3/16" = 1'-0"

A I L S

M O

D E

R N

I Z

A T

I O

I L L

E T

I N

U I L D

I N

F O

L E

A T

J U

A N

R T

I C

M-2

AutoCAD SHX Text

POLES

AutoCAD SHX Text

MK'D

AutoCAD SHX Text

SERVES (A)

AutoCAD SHX Text

DISCONNECT SWITCHES SCHEDULE

AutoCAD SHX Text

AutoCAD SHX Text 4X

AutoCAD SHX Text H.D.

AutoCAD SHX Text

A/C & CU

AutoCAD SHX Text

FUSES

AutoCAD SHX Text

LOAD

AutoCAD SHX Text

NEMA

AutoCAD SHX Text

VOLTS

AutoCAD SHX Text

DUTY

AutoCAD SHX Text

REMARKS

AutoCAD SHX Text Equal or similar to model HBDLDS

AutoCAD SHX Text as manufactured by Hubbell Wiring

AutoCAD SHX Text Devices. Contractor shall coordinate

AutoCAD SHX Text

BRAND

AutoCAD SHX Text Daikin

AutoCAD SHX Text

AHU-1-8

AutoCAD SHX Text

MK'D

AutoCAD SHX Text

AIR CONDITIONING UNITS SCHEDULE

AutoCAD SHX Text

CAPACITY

AutoCAD SHX Text

4 TON

AutoCAD SHX Text

MODEL

AutoCAD SHX Text

FXHQ100MAVE

AutoCAD SHX Text

V/PH/HZ

AutoCAD SHX Text

CHARASTERISTICS

AutoCAD SHX Text

ELECTRICAL

AutoCAD SHX Text 208/1%%C/60

AutoCAD SHX Text

REMARKS

AutoCAD SHX Text

CEILING SUSPENDED

AutoCAD SHX Text

BREAKERS

AutoCAD SHX Text

CIRCUIT

AutoCAD SHX Text

%%UNOTES:

AutoCAD SHX Text Daikin

AutoCAD SHX Text

CU-1-8

AutoCAD SHX Text

4 TON

AutoCAD SHX Text

RXYMQ4PVE

AutoCAD SHX Text 208/1%%C/60

AutoCAD SHX Text

VRV III S R410A-60

AutoCAD SHX Text

SS8

AutoCAD SHX Text

SS1

AutoCAD SHX Text exact electrical protection's size for

AutoCAD SHX Text A/C equipment and wiring prior to

AutoCAD SHX Text order and installation.

AutoCAD SHX Text

1. THE MECHANICAL CONTRACTOR SHALL COORDINATE EXACT ELECTRICAL PROTECTION SIZE OF A/C EQUIPMENT AND WIRING, WITH MANUFACTURER AND ELECTRICAL CONTRACTOR, PRIOR TO ORDER AND INSTALLATION. 2. CEILING MOUNTED AIR HANDLING UNITS MUST BE INSTALLED WITH A DECORATION PANEL, FILTER CHAMBER, AND LONG LIFE FILTER. 3. ALL AIR HANDLING UNITS MUST BE INSTALLED WITH A GROUP CONTROL THERMOSTAT EQUAL TO MODEL BRC1C62 (WIRED REMOTE CONTROLLER) AS MANUFACTURED BY DAIKIN. SEE MECHANICAL FLOOR PLAN TO VERIFIY AHU's CONTROLLED GROUP. 4. ALL AIR CONDITIONING UNITS MUST BE INSTALLED BY AN CERTIFIED (STATE AND FEDERAL LAWS AND REGULATIONS) TECHNICIAN, ALSO, THE TECHNICIAN MUST BE CERTIFIED BY THE MANUFACTURER FOR THE PROPER INSTALLATION AND WARRANTIES.

AutoCAD SHX Text

%%UHVAC GENERAL NOTES:

AutoCAD SHX Text

1. ALL WORK SHALL BE IN ACCORDANCE WITH STATE AND LOCAL CODES AND OWNER CRITERIA ALL FEES AND TAXES RELATED TO INSPECTIONS, PERMITS AND LICENSES SHALL BE PAID FOR BY THIS CONTRACTOR. 2. ALL WORKS SHALL BE ACCOMPLISHED BY EXPERIENCED PERSONNEL IN ACCORDANCE WITH THE RECOMMENDED PRACTICES OF THE ASHRAE. SMACNA AND ALL APPLICABLE CODES AND THOSE OF THE MANUFACTURERS OF THE EQUIPMENT AND MATERIALS TO BE INSTALL. 3. THE CONTRACTOR SHALL VISIT THE JOB SITE AND PREMISES, AND BE FAMILIAR WITH THE JOB CONDITIONS PRIOR TO SUBMITTING BID. 4. AIR CONDITIONING AND VENTILATING SYSTEM SHALL BE COMPLETE IN EVERY DETAIL AND SHALL INCLUDE ALL ITEMS NECESSARY FOR A COMPLETE AND FUNCTIONING INSTALLATION, SUBJECT TO FINAL APPROVAL OF OWNER. ALL MATERIAL USED FOR THE JOB SHALL BE NEW AND THE BEST OF THEIR KINDS. ALL EQUIPMENT USED SHALL BEAR A U.L. LABEL. 5. MECHANICAL CONTRACTOR SHALL VERIFY VOLTAGE OF ALL MECHANICAL EQUIPMENT WITH ELECTRICAL CONTRACTOR BEFORE ORDERING OF EQUIPMENT AND PROVIDE MOTORS AND MOTORS STARTERS. THE MECHANICAL CONTRACTOR SHALL BE RESPONSIBLE OF THE COORDINATION AND THE PROVISION OF ANY POWER REQUIREMENT FOR THE EQUIPMENT CONTROL SYSTEM. 9. PARALLEL RUNS OF HORIZONTAL PIPING SHALL BE GROUPED TOGETHER ON TRAPEZE UNISTRUT TYPE HANGERS, PIPES SHALL BE FASTENED BY MEANS OF GALVANIZED STEEL PIPE CLAMPS. A PVC SLEEVE SHALL BE PROVIDED BETWEEN PIPE AND HANGER TO AVOID GALVANIC ACTION. SPACING OF PIPE SUPPORTS SHALL NOT EXCEED 8 FEET FOR PIPES UP TO 2 INCHES AND 10 FEET ON ALL OTHER PIPING. 10. DRAIN LINES FROM THE AIR CONDITIONING UNITS SHALL BE TAKE TO OPEN DRAIN CONNECTIONS. THESE LINES SHALL BE PLASTIC PVC (1-1/2" DIAMETER) SCHEDULE 40 TYPE I, WITH SOLDER JOINTS AND FITTINGS WITH A MINIMUM SLOPE OF 1/4"/FT. PROVIDE WITH CLEANOUTS AND SUPPORTS ALONG THE LINE OF DRAIN. THE DRAIN SHALL BE INSULATED WITH 1/2" THICKNESS FOAM PLASTIC CLOSED CELL (K-0.28) SEALED WITH ADEQUATE ADHESIVE AT CEILINGS. 11. THE MECHANICAL CONTRACTOR SHALL SUPPLY AND INSTALL ALL ELECTRICAL CONTROLS, SAFETY SWITCHES AND ACCESSORIES NOT INDICATED IN THE ELECTRICAL DRAWINGS BUT NECESSARY FOR THE PROPER OPERATION OF THE EQUIPMENT IN ACCORDANCE WITH MECHANICAL EQUIPMENT MANUFACTURER RECOMMENDATIONS AND THE NATIONAL ELECTRIC CODE. 12. THE MECHANICAL CONTRACTOR PERFORM ALL WIRING AND CONNECTIONS (POWER AND CONTROL) NOT INDICATED IN THE ELECTRICAL DRAWINGS AND NECESSARY FOR THE PROPER OPERATION OF THE MECHANICAL EQUIPMENT IN STRICT ACCORDANCE WITH THE RULES OF THE NATIONAL ELECTRICAL CODE. 13. THE CONTRACTOR SHALL TAKE EVERY PRECAUTIONS IN ORDER TO MINIMIZED OR ELIMINATE THE TRASMISSION OF NOISE OR VIBRATION FROM THE EQUIPMENT, PIPING SYSTEM OR DUCT SYSTEM TO THE CONDITIONING SPACE. 15. ANY PIPE OR DUCT WHERE OCCUR, ENTERING OR PASSING THROUGH WALLS OR PLENUM LIMITS MUST BE PERFECTLY SEALED AT ALL POINT WHERE ITS PERFORATED THE WALL OR THE LIMITING PARTITIONS. 16. FINAL LOCATION OF AIR CONDITIONING AND VENTILATION EQUIPMENT, WALL AND ROOF PENETRATIONS AND PIPING AND DUCTWORK RUNNING SHALL BE COORDINATED WITH THE ENGINEER, THE OWNER AND THE GENERAL CONTRACTOR. 17. AIR CONDITIONING EQUIPMENT MUST BE PROVIDED WITH THERMOSTATIC EXPANSION VALVE, LIQUID SOLENOID VALVES, REFRIGERANT-22 FILTER DRYER, ANTI-CORROSIVE TREATMENT ND PACK LESS GLOBE VALVE FOR FIELD INSTALLATION WHEN APPLICABLE. 18. ALL EXTERIOR A/C UNIT EQUIPMENT (CONDENSING UNITS), SHALL BE PROTECTED AGAINST CORROSION. THE ANTI-CORROSIVE TREATMENT SHALL BE EQUAL TO BLYGOLD PROTECTIVE COATING AS MANUFACTURED BY BLYGOLD AMERICA, INC. 19. THE ENERGY EFFICIENCY RATIO FOR ALL MINI-SPLIT A/C UNITS SHALL BE 14.0 MINIMUM. 20. THE CONTRACTOR SHALL BE RESPONSIBLE FOR PROVIDE AND PLACE ID TAGS SYSTEM TO IDENTIFY THE A/C UNITS COMPONENTS (FAN COILS AND CONDENSING UNITS). SEE IDENTIFICATION TAG DETAIL. THE INFORMATION TO ID TAGS WILL BE PROVIDE BY THE OWNER. 21. THE CONTRACTOR SHALL BE RESPONSIBLE FOR PROVIDE AND INSTALL TWO TIE-DOWNS FOR EACH CONDENSING UNIT INSTALLED OVER A WALL PLATFORM. SEE DETAIL. THE TIE-DOWNS CONSISTS OF A 3/8" DIA. GALVANIZED STEEL TENSOR CABLE, COVERED WITH PLASTIC. THE TIE-DOWN MUST BE ANCHORED TO PLATFORM USING 3/8"-16 X 3-1/2" EYE BOLTS WITH SPLIT LOCK WASHERS & LOCK NUTS AND 3/8" X 4" GALVANIZED EYE-HOOK TURN BUCKLE. THE UNION BETWEEN TENSOR CABLE AND EYE-HOOK TURN BUCKLE MUST BE USING 3/8" GALVANIZED CLAMPS. SEE DETAIL. 22. ALL A/C UNIT EQUIPMENT SHALL HAVE THE FOLLOWING WARRANTY: a. 90 DAYS OF FULL WARRANTY INCLUDING, BUT NOT LIMITED TO, INSTALLATION WORKS, SERVICE AND EQUIPMENT. b. TWO YEARS IN EQUIPMENT AND PARTS. c. TEN YEARS IN COMPRESSOR AND COIL. 23. THE CONTRACTOR MUST BE RESPONSIBLE FOR COORDINATE THE FINAL LOCATION OF EACH MECHANICAL AND ELECTRICAL EQUIPMENT OR SYSTEM ELEMENTS (AIR HANDING UNITS, CONDENSING UNITS, DISCONNECT SWITCHES, REFRIGERANT OR DRAIN PIPES, ETC.) WITH THE OTHERS CONSTRUCTION BRANCHES, TRADES OR SPECIALTIES (CIVIL, ELECTRICAL, ARCHITECTURAL, ETC). THE MAIN GOAL IS TO REACH THE ORIGINAL DESIGN'S INTENT IN EACH BUILDING COMPONENTS. EACH CHANGE, IF ANY, MUST BE APPROVED BY THE OWNER PRIOR TO BE DONE. 24. FINAL LOCATIONS FOR THERMOSTAT AND TEMPERATURE SENSORS WILL BE COORDINATED WITH INTERIOR WALL LAYOUT. 25. THE CONTRACTOR MUST BE RESPONSIBLE FOR INSTALL ALL MECHANICAL AND ELECTRICAL EQUIPMENT OR SYSTEM ELEMENTS (AIR HANDING UNITS, CONDENSING UNITS, DISCONNECT SWITCHES, REFRIGERANT OR DRAIN PIPING, ETC.) ANCHORED RIGIDLY FROM THE STRUCTURE. BY MEANS OF ADJUSTABLE HANGERS, THREADED RODS, UNISTRUT HANGERS AND CHANNELS; OR USING OTHER MEANS NOT MENTIONED BUT NECESSARY FOR THE PROPER INSTALLATION OF THE TOTAL SYSTEM. SEE INSTALLATION DETAILS AND TECHNICAL SPECIFICATIONS.

AutoCAD SHX Text

FXHQ100MAVE

AutoCAD SHX Text 3/8"X5/8"

AutoCAD SHX Text

AHU

AutoCAD SHX Text

RXYMQ4PVE

AutoCAD SHX Text

RXYMQ4PVE

AutoCAD SHX Text

FXHQ100MAVE

AutoCAD SHX Text

BRC1C62

AutoCAD SHX Text P1/P2

AutoCAD SHX Text F1/F2

AutoCAD SHX Text

IN F1/F2

AutoCAD SHX Text

PIPING DIAGRAM

AutoCAD SHX Text

WIRING DIAGRAM

AutoCAD SHX Text

CONDENSATE WATER

AutoCAD SHX Text

DRAIN PIPING 3/4"

AutoCAD SHX Text

PVC SCH-40

AutoCAD SHX Text

REFRIGERANT

AutoCAD SHX Text

PIPING

AutoCAD SHX Text

%%UTYPICAL A/C DRAIN DETAIL

AutoCAD SHX Text 3/16"=1'-0"

AutoCAD SHX Text

%%UTYPICAL REFRIGERANT PIPING DETAIL

AutoCAD SHX Text 3/16"=1'-0"

AutoCAD SHX Text

AHU

AutoCAD SHX Text

USE REFRIGERANT LINE COVER

AutoCAD SHX Text LDK92i WALL DUCT KIT 3.5"

AutoCAD SHX Text

BY FORTRESS

AutoCAD SHX Text

%%UNOTE:

AutoCAD SHX Text

GYPSUM BOARD

AutoCAD SHX Text

CEILING

AutoCAD SHX Text

AHU

AutoCAD SHX Text

GYPSUM BOARD

AutoCAD SHX Text

CEILING

AutoCAD SHX Text

AHU

AutoCAD SHX Text

AHU

AutoCAD SHX Text #4 @ 8" c.c.

AutoCAD SHX Text

FIN. GRADE

AutoCAD SHX Text # 4 @ 8"

AutoCAD SHX Text

FIN. GRADE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

%%USECTION VIEW

AutoCAD SHX Text # 4 @ 8"

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

%%UCONDENSING UNITS CONCRETE PAD DETAIL

AutoCAD SHX Text

EACH WAY

AutoCAD SHX Text TYPICAL 3/8"t x 4" EYE-HOOK TURN BUCKLE

AutoCAD SHX Text

TYPICAL 1" DIAMETER GALVANIZED CLAMPS

AutoCAD SHX Text TYPICAL 3/8"t - 16 x 3-1/2" EYE-BOLT

AutoCAD SHX Text

TYPICAL 3/8" X 3-3/4" WEDGE ANCHORS

AutoCAD SHX Text

AS MANUFACTURED BY RAMSET/RED HEAD

AutoCAD SHX Text

%%UTYPICAL A/C ANCHOR DETAIL

AutoCAD SHX Text 3/8"=1'-0"

AutoCAD SHX Text

WIRE CABLE WITH PLASTIC COVER

AutoCAD SHX Text

NO.

AutoCAD SHX Text

DATE

AutoCAD SHX Text R E V I S I O N S

AutoCAD SHX Text D E S C R I P T I O N

AutoCAD SHX Text

SHEET TITLE:

AutoCAD SHX Text

PROJECT:

AutoCAD SHX Text C A L L E G E N E R A L E S T E V E S #100 , S A N J U A N P U E R T O R I C O 00901 - 2104

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

DESIGN:

AutoCAD SHX Text

TOTAL SHEETS:

AutoCAD SHX Text

SHEET NAME:

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

VICTOR SANCHEZ, P.E.

AutoCAD SHX Text

A. PEDRAZA

AutoCAD SHX Text

DIRECTORATE OF ENGINEERING

AutoCAD SHX Text

SHEET:

AutoCAD SHX Text

CERTIFIED:

AutoCAD SHX Text

FY18

AutoCAD SHX Text

SUPERVISOR:

AutoCAD SHX Text

CPT. FONSECA, P.E.

AutoCAD SHX Text

NO.

AutoCAD SHX Text

DATE

AutoCAD SHX Text D E S C R I P T I O N

121&123_ 0 Cover Sheet

Sheets and Views

COVER

121&123_1 General Notes LEGEND & GENE

121&123_3 STAGING PLAN (G-2) G-2 (1)

121&123_4 Utility Site Plans(C-1) C-1

121&123_5 Utility Site Plans(C-2) C-2

121&123_6 Utility Site Plans(C-3) C-3

121&123_7 Floor Plan-Demo

121&123_8 Existing Elevations-Demo

Sheets and Views

Demo-Elevation

121&123_9 Proposed Plan FL Plan

121&123_10 Proposed Elevation Elevatio

121&123_11 Reflected Ceiling RCP

121&123_12 Roof Plan A-6

121&123_13 Schedules & Details SCHED &

121&123_14 Enlarged Plans_Int

121&123_15 Plumbing Plans P-1

121&123_16 Plumbing Plans P-2

121&123_17 Plumbing Plans P-3 (1)

121&123_18 Mechanical Plans MECHANICAL

121&123_19 Mechanical Plans-AC NOTES & DETAILS

Sheets and Views

AC NOTES & DETAILS

121&123_20 Electrical Plans LIGHTING

121&123_21 Electrical Plans POWER

121&123_22 Electrical Plans NOTES & DE

121&123_23 Electrical Plans ELECT PANE

File details come from the government source that posted it.