W912HV-18-B-0005-Am0003_Revised_Specifications.pdf

PA00022 Repl ace/ Renovat e EJ Ki ng Hi gh School 15SF0004 Combi ned Fl eet Act i v i t i es Sasebo, Japan

SECTI ON TABLE OF CONTENTS

DI VI SI ON 08 - OPENI NGS

SECTI ON 08 41 13

ALUMI NUM- FRAMED ENTRANCES AND STOREFRONTS

PART 1 GENERAL

1. 1 SUMMARY

1. 2 REFERENCES

1. 3 ADMI NI STRATI VE REQUI REMENTS

1. 3. 1 Ent r ance Per f or mance Requi r ement s

1. 3. 1. 1 Ai r I nf i l t r at i on

1. 3. 1. 2 Wi nd Loads

1. 3. 1. 3 Def l ect i on

1. 3. 1. 4 Condensat i on Resi st ance and Ther mal Tr ansmi t t ance

Per f or mance Requi r ement s

1. 3. 1. 5 Wat er I nf i l t r at i on

1. 3. 2 St r uct ur al

1. 3. 2. 1 For ced Ent r y

1. 4 SUBMI TTALS

1. 5 QUALI TY ASSURANCE

1. 5. 1 Qual i f i cat i ons

1. 5. 1. 1 I nst al l er Qual i f i cat i ons

1. 5. 1. 2 Manuf act ur er Qual i f i cat i ons

1. 5. 2 Pr e- I nst al l at i on Meet i ngs

1. 5. 3 Si ngl e Sour ce Responsi bi l i t y

1. 6 DELI VERY, STORAGE, AND HANDLI NG

1. 6. 1 Or der i ng

1. 6. 2 Packi ng, Shi ppi ng, Handl i ng and Unl oadi ng

1. 6. 3 St or age and Pr ot ect i on

1. 7 PROJECT CONDI TI ONS/ SI TE CONDI TI ONS

1. 7. 1 Fi el d Measur ement s

1. 8 DESI GN AND PERFORMANCE CRI TERI A

1. 9 SUSTAI NABLE DESI GN REQUI REMENTS

1. 9. 1 Recycl ed Cont ent

1. 10 DESI GN DATA REQUI REMENTS

PART 2 PRODUCTS

2. 1 MATERI ALS

2. 1. 1 Al umi num ( Ent r ances and Component s)

2. 1. 1. 1 Mat er i al St andar d

2. 1. 1. 2 Tol er ances

2. 2 MANUFACTURERS

2. 3 ACCESSORI ES

2. 3. 1 Fast ener s

2. 3. 2 Per i met er Anchor s

2. 3. 3 St eel Ti e Back Br acket s

2. 3. 4 St andar d Ent r ance Har dwar e

2. 3. 4. 1 Weat her st r i ppi ng

2. 3. 4. 2 Thr eshol d

W912HV-18-B-0005 SECTI ON 08 41 13 Page 1 (AM-0003)

2. 3. 4. 3 Of f set Pi vot s

2. 3. 4. 4 Pani c Devi ce

2. 3. 4. 5 Cl oser

2. 3. 4. 6 Secur i t y Lock/ Dead Lock

2. 3. 4. 7 Cyl i nder ( s) / Thumb- t ur n

2. 3. 4. 8 Cyl i nder Guar d

2. 4 RELATED MATERI ALS

2. 4. 1 Seal ant s

2. 4. 2 Al umi num Door s and Fr ames

2. 4. 3 I nt egr al Al umi num Pr oj ect ed Wi ndows

2. 4. 4 Gl ass

2. 5 FABRI CATI ON

2. 5. 1 Ent r ance Syst em Fabr i cat i on

2. 5. 2 Shop Assembl y

2. 5. 2. 1 Wel di ng

2. 5. 3 Fabr i cat i on Tol er ance

2. 5. 3. 1 Mat er i al Cut s

2. 5. 3. 2 Maxi mum Of f set

2. 5. 3. 3 Joi nt s

2. 5. 3. 4 Var i at i on

2. 5. 3. 5 Fl at ness

2. 6 SOURCE QUALI TY CONTROL

2. 6. 1 Sour ce Qual i t y

2. 6. 1. 1 Bui l di ng Encl osur e Syst em

2. 6. 2 Fabr i cat i on Tol er ances

2. 7 SUNSCREEN

2. 7. 1 Gener al

2. 7. 2 Fr ami ng

2. 7. 3 Fast ener s

2. 7. 4 Fi ni sh

2. 8 SUNSHADES

2. 8. 1 Gener al

2. 8. 2 Fast ener s

2. 8. 3 Fi ni sh

PART 3 EXECUTI ON

3. 1 EXAMI NATI ON

3. 1. 1 Si t e Ver i f i cat i on of Condi t i ons

3. 1. 2 Fi el d Measur ement s

3. 2 I NSTALLATI ON

3. 2. 1 Pr epar at i on

3. 2. 1. 1 Adj acent Sur f aces Pr ot ect i on

3. 2. 1. 2 Al umi num Sur f ace Pr ot ect i on

3. 2. 2 Adj ust i ng

3. 2. 3 Rel at ed Pr oduct s I nst al l at i on Requi r ement s

3. 2. 3. 1 Seal ant s ( Per i met er )

3. 2. 3. 2 Gl ass

3. 2. 3. 3 Ref er ence

3. 3 PROTECTI ON AND CLEANI NG

3. 3. 1 Pr ot ect i on

3. 3. 2 Cl eani ng

3. 4 WARRANTY

- - End of Sect i on Tabl e of Cont ent s - -

W912HV-18-B-0005 SECTI ON 08 41 13 Page 2 (AM-0003)

SECTI ON 08 41 13

ALUMI NUM- FRAMED ENTRANCES AND STOREFRONTS

PART 1 GENERAL

1. 1 SUMMARY

Thi s Speci f i cat i on i ncl udes al umi num ent r ances, gl ass and gl azi ng, door har dwar e, component s, and sunscr eens t hat ar e f ast ened t o bot h st r uct ur al wal l s and t o st or ef r ont f r ami ng and sunshades t hat ar e f ast ened t o st or ef r ont f r ami ng. Al l f i xed wi ndows shal l be wi ndow wal l const r uct i on.

Type of Al umi num Ent r ance i ncl udes:

I mpact Resi st ance Ent r ances; st i l es and r ai l s as i ndi cat ed, 44. 45 mm dept h, i nt er i or st r uct ur al s i l i cone gl azed, hi gh t r af f i c / i mpact r esi st ant appl i cat i ons.

1. 2 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN ARCHI TECTURAL MANUFACTURERS ASSOCI ATI ON ( AAMA)

AAMA 1503 ( 2009) Vol unt ar y Test Met hod f or Ther mal Tr ansmi t t ance and Condensat i on Resi st ance of Wi ndows, Door s and Gl azed Wal l Sect i ons

AAMA 503 ( 2008) Vol unt ar y Speci f i cat i on f or Fi el d Test i ng of Newl y I nst al l ed St or ef r ont s, Cur t ai n Wal l s and Sl oped Gl azi ng Syst ems

AAMA 800 ( 2010) Vol unt ar y Speci f i cat i ons and Test Met hods f or Seal ant s

AMERI CAN NATI ONAL STANDARDS I NSTI TUTE ( ANSI )

ANSI Z97. 1 ( 2009; Er r at a 2010) Saf et y Gl azi ng Mat er i al s Used i n Bui l di ngs - Saf et y Per f or mance Speci f i cat i ons and Met hods of Test

AMERI CAN SOCI ETY OF CI VI L ENGI NEERS ( ASCE)

ASCE/ SEI 7- 10 ( 2010; Er r at a 2011; Supp 1 2013) Mi ni mum Desi gn Loads f or Bui l di ngs and Ot her Structures

ASTM I NTERNATI ONAL ( ASTM)

ASTM B 221 ( 2014) St andar d Speci f i cat i on f or Al umi num and Al umi num- Al l oy Ext r uded Bar s, Rods, Wi r e, Pr of i l es, and Tubes

W912HV-18-B-0005 SECTI ON 08 41 13 Page 3 (AM-0003)

ASTM B 221M ( 2013) St andar d Speci f i cat i on f or Al umi num and Al umi num- Al l oy Ext r uded Bar s, Rods, Wi r e, Pr of i l es, and Tubes ( Met r i c)

ASTM E 1105 ( 2000; R 2008) St andar d Test Met hod f or Fi el d Det er mi nat i on of Wat er Penet r at i on of I nst al l ed Ext er i or Wi ndows, Skyl i ght s, Door s, and Cur t ai n Wal l s, by Uni f or m or Cycl i c St at i c Ai r Pr essur e Di f f er ence

ASTM E 1424 ( 1991; R 2008) St andar d Test Met hod f or Det er mi ni ng t he Rat e of Ai r Leakage Thr ough Ext er i or Wi ndows, Cur t ai n Wal l s, and Door s Under Speci f i ed Pr essur e and Temper at ur e Di f f er ences Acr oss t he Speci men

ASTM E 283 ( 2004; R 2012) Det er mi ni ng t he Rat e of Ai r Leakage Thr ough Ext er i or Wi ndows, Cur t ai n Wal l s, and Door s Under Speci f i ed Pr essur e Di f f er ences Acr oss t he Speci men

ASTM E 330 ( 2002; R 2010) St r uct ur al Per f or mance of Ext er i or Wi ndows, Door s, Skyl i ght s and Cur t ai n Wal l s by Uni f or m St at i c Ai r Pr essur e Di f f er ence

ASTM E 331 ( 2000; R 2009) Wat er Penet r at i on of Ext er i or Wi ndows, Skyl i ght s, Door s, and Cur t ai n Wal l s by Uni f or m St at i c Ai r Pr essur e Di f f er ence

ASTM E 783 ( 2002; R 2010) St andar d Test Met hod f or Fi el d Measur ement of Ai r Leakage Thr ough I nst al l ed Ext er i or Wi ndows and Door s

ASTM F 1642 ( 2012) St andar d Test Met hod f or Gl azi ng and Gl azi ng Syst ems Subj ect t o Ai r bl ast Loadings

BUI LDERS HARDWARE MANUFACTURERS ASSOCI ATI ON ( BHMA)

ANSI / BHMA A156. 10 ( 2011) Power Oper at ed Pedest r i an Door s

ANSI / BHMA A156. 4 ( 2013) Door Cont r ol s - Cl oser s

GLASS ASSOCI ATI ON OF NORTH AMERI CA ( GANA)

GANA Gl azi ng Manual ( 2004) Gl azi ng Manual

JAPANESE ARCHI TECTURAL STANDARD SPECI FI CATI ON ( JASS)

JASS 14 ( 2012) Cur t ai n Wal l Const r uct i on

JAPANESE I NDUSTRI AL STANDARDS ( JI S)

JI S A 4706 ( 2015) Wi ndows

JI S H 4000 ( 2006) Al umi num and Al umi num Al l oy Sheet s, W912HV-18-B-0005 SECTI ON 08 41 13 Page 4 (AM-0003)

St r i ps and Pl at es

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

16 CFR 1201 Saf et y St andar d f or Ar chi t ect ur al Gl azi ng Materials

UNDERWRI TERS LABORATORI ES ( UL)

UL 325 ( 2013; Repr i nt May 2015) Door , Dr aper y, Gat e, Louver , and Wi ndow Oper at or s and Systems

1. 3 ADMI NI STRATI VE REQUI REMENTS

Wi t hi n 30 days of t he Cont r act Awar d, submi t t he f ol l owi ng f or r evi ew and appr oval by t he Cont r act i ng Of f i cer :

Li st i ng of pr oduct i nst al l at i ons

Sampl e war r ant y

Manuf act ur er ' s cat al og dat a

I nst al l at i on dr awi ngs

Fabr i cat i on dr awi ngs f or cust om f abr i cat i ons i ncl udi ng sunscr eens and sunshades

Concur r ent l y submi t cer t i f i ed t est r epor t s showi ng compl i ance wi t h speci f i ed per f or mance char act er i s t i cs and UL 325 f or t he f ol l owi ng:

1. 3. 1 Ent r ance Per f or mance Requi r ement s

1. 3. 1. 1 Ai r I nf i l t r at i on

Submi t cer t i f i ed t est r epor t s showi ng compl i ance wi t h speci f i ed per f or mance char act er i st i cs as f ol l ows:

a. For s i ngl e act i ng of f set pi vot , but t hung or cont i nuous gear ed hi nge ent r ances i n t he c l osed and l ocked posi t i on, t est t he speci men i n accor dance wi t h ANSI / BHMA A156. 10, and ASTM E 283 ( JI S A 4706) at a pr essur e di f f er ent i al of 7. 7. 67 k i l ogr am/ squar e met er f or pai r s of door s; maxi mum i nf i l t r at i on f or a pai r of 2. 13 met er by 2. 44 met er ent r ance door s and f r ame i s 0. 034 cubi c met er s per mi nut e/ squar e met er .

b. Maxi mum al l owabl e i nf i l t r at i on, f or a compl et ed st or ef r ont syst em i s not t o exceed 0. 0017 cubi c met er s/ squar e met er when t est ed i n accor dance wi t h ASTM E 1424 at di f f er ent i al st at i c pr essur e of 299 Pa.

1. 3. 1. 2 Wi nd Loads

a. Pr ovi de compl et ed ext er i or wal l s i ncl udi ng vest i bul es st or ef r ont syst em and sunscr een and sunshades capabl e of exceedi ng st r uct ur al pr oper t i es as i ndi cat ed.

b. I nt er i or Wal l s: Pr essur e act i ng i n ei t her di r ect i on 240 PA

W912HV-18-B-0005 SECTI ON 08 41 13 Page 5 (AM-0003)

1. 3. 1. 3 Def l ect i on

Submi t cer t i f i ed t est r epor t s showi ng compl i ance wi t h speci f i ed per f or mance char act er i st i cs as f ol l ows:

The maxi mum al l owabl e def l ect i on i n any member when t est ed i n accor dance wi t h ASTM E 330 ( JI S A 4706) wi t h al l owabl e st r ess i n accor dance wi t h AA Speci f i cat i ons f or Al umi num St r uct ur es i s L/ 175 or

19. 1 mm maxi mum i ncl udi ng al l l oads pr oduced by t he at t achment of sunscr eens and sunshades.

1. 3. 1. 4 Condensat i on Resi st ance and Ther mal Tr ansmi t t ance Per f or mance Requirements

Submi t cer t i f i ed t est r epor t s showi ng compl i ance wi t h speci f i ed per f or mance char act er i st i cs as f ol l ows:

a. U- Val ue Requi r ement s:

( 1) Per f or m t est i n accor dance wi t h AAMA 1503 ( JASS 14) pr ocedur e and on t he conf i gur at i on speci f i ed t her ei n.

( 2) Ther mal Tr ansmi t t ance ( " U" Val ue) maxi mum 3. 69 W/ sqm/ deg C at

24. 14 kmph ext er i or wi nd.

b. CRF Cl ass Requi r ement s:

( 1) Per f or m t est i n accor dance wi t h AAMA 1503 ( JASS 14).

( 2) Condensat i on Resi st ance Fact or Requi r ement s ( CRF) mi ni mum 64.

1. 3. 1. 5 Wat er I nf i l t r at i on

Submi t cer t i f i ed t est r epor t s showi ng compl i ance wi t h speci f i ed per f or mance char act er i st i cs as f ol l ows:

a. Syst em i s desi gned t o pr ovi de no uncont r ol l ed wat er when t est ed i n accor dance wi t h ASTM E 331 or JASS 14( JI S A 4706) at a st at i c pr essur e of 956 PPA. Upper l i mi t of t he maxi mum posi t i ve pr essur e shal l be r equi r ed by ASTM E 331 or JASS 14.

b. Test and cer t i f y t est r esul t s per AAMA 503, ASTM E 1105, ASTM E 783, ASTM E 331 or JI S A 4706, and make avai l abl e upon r equest .

1. 3. 2 St r uct ur al

Submi t cer t i f i ed t est r epor t s showi ng compl i ance wi t h speci f i ed per f or mance char act er i st i cs as i ndi cat ed i ncl udi ng sunscr eens and sunshades.

1. 3. 2. 1 For ced Ent r y

Submi t cer t i f i ed t est r epor t s showi ng compl i ance wi t h speci f i ed per f or mance char act er i st i cs as f ol l ows:

Test i n accor dance wi t h ASTM F 1642 ( JI S A 4706).

W912HV-18-B-0005 SECTI ON 08 41 13 Page 6 (AM-0003) j2ee9smg Line

1. 4 SUBMI TTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 01 Pr econst r uct i on Submi t t al s

Sampl e War r ant y

Li st i ng of Pr oduct I nst al l at i ons

SD- 02 Shop Dr awi ngs

I nst al l at i on Dr awi ngs

Fabr i cat i on Dr awi ngs

SD- 03 Pr oduct Dat a

Manuf act ur er ' s Cat al og Dat a

SD- 04 Sampl es

Ter r acot t a baguet t a

Fact or y col or coat ed al umi num

SD- 05 Desi gn Dat a

Desi gn Dat a; G

Submi t desi gn anal ysi s wi t h cal cul at i ons showi ng t hat t he desi gn of each di f f er ent s i ze and t ype of uni t and i t s anchor age t o t he st r uct ur e meet s t he mi ni mum st r uct ur al pr oper t i es and l oads i ndi cat ed. Cal cul at i ons ver i f y i ng t he st r uct ur al pr oper t i es of each pr oposed uni t and anchor age, shal l be pr epar ed and si gned by a r egi st er ed pr of essi onal engi neer . The component s and anchor age devi ces t o t he st r uct ur e, as det er mi ned by t he desi gn anal ysi s, shal l be r ef l ect ed i n t he shop dr awi ngs.

SD- 06 Test Repor t s

Cer t i f i ed Test Repor t s

SD- 07 Cer t i f i cat es

Manuf act ur er ' s Pr oduct War r ant y

1. 5 QUALI TY ASSURANCE

1. 5. 1 Qual i f i cat i ons

1. 5. 1. 1 I nst al l er Qual i f i cat i ons

Pr ovi de document at i on of I nst al l er exper i ence t o per f or m wor k of t hi s sect i on, who has speci al i zed i n t he i nst al l at i on of wor k s i mi l ar t o t hat

W912HV-18-B-0005 SECTI ON 08 41 13 Page 7 (AM-0003) r equi r ed f or t hi s pr oj ect , and who i s accept abl e t o pr oduct manuf act ur er .

1. 5. 1. 2 Manuf act ur er Qual i f i cat i ons

Ensur e manuf act ur er i s capabl e of pr ovi di ng f i el d ser vi ce r epr esent at i on dur i ng const r uct i on, appr ovi ng accept abl e i nst al l er and appr ovi ng appl i cat i on met hod.

1. 5. 2 Pr e- I nst al l at i on Meet i ngs

Conduct pr e- i nst al l at i on meet i ng t o ver i f y pr oj ect r equi r ement s, subst r at e condi t i ons, manuf act ur er ' s i nst al l at i on i nst r uct i ons, and manuf act ur er ' s war r ant y r equi r ement s.

1. 5. 3 Si ngl e Sour ce Responsi bi l i t y

Pr ovi de desi gn, st r uct ur al engi neer i ng, and cust om f abr i cat i on f or door por t al syst em and suppl y of al l component s, mat er i al s, and pr oduct s based on a s i ngl e manuf act ur er of sol e r esponsi bi l i t y . Pr ovi s i on of pr oduct s f r om numer ous sour ces f or s i t e assembl y wi t hout compl et e s i ngl e sour ce desi gn and suppl y r esponsi bi l i t y i s not accept abl e. Wor k i t ems and component s t o be f abr i cat ed or suppl i ed by s i ngl e sour ce ar e:

a. Door assembl i es t o be i nst al l ed i n door por t al , st or ef r ont f r ami ng as speci f i ed i n Sect i on 08 11 16 ALUMI NUM DOORS AND FRAMES.

b. Gl azed wal l t o be const r uct ed ar ound door por t al as speci f i ed i n t hi s Section.

c. I nt egr al al umi num pr oj ect ed wi ndows ar e speci f i ed under Sect i on 08 51 13, ALUMI NUM WI NDOWS.

d. oor oper at i ng har dwar e t o be i nst al l ed on or wi t hi n door por t al as speci f i ed i n Sect i on 08 71 00 DOOR HARDWARE.

e. Gl ass as speci f i ed i n Sect i on 08 81 00 GLAZI NG.

1. 6 DELI VERY, STORAGE, AND HANDLI NG

1. 6. 1 Or der i ng

Compl y wi t h manuf act ur er ' s or der i ng i nst r uct i ons and l ead- t i me r equi r ement s t o avoi d const r uct i on del ays.

1. 6. 2 Packi ng, Shi ppi ng, Handl i ng and Unl oadi ng

Del i ver mat er i al s i n manuf act ur er ' s or i gi nal , unopened, undamaged cont ai ner s wi t h i dent i f i cat i on l abel s i nt act .

1. 6. 3 St or age and Pr ot ect i on

St or e mat er i al s pr ot ect ed f r om exposur e t o har mf ul weat her condi t i ons.

Handl e st or ef r ont mat er i al and component s t o avoi d damage. Pr ot ect st or ef r ont sunscr een and sunshade mat er i al agai nst damage f r om el ement s, const r uct i on act i v i t i es, and ot her hazar ds bef or e, dur i ng and af t er installation.

W912HV-18-B-0005 SECTI ON 08 41 13 Page 8 (AM-0003)

1. 7 PROJECT CONDI TI ONS/ SI TE CONDI TI ONS

1. 7. 1 Fi el d Measur ement s

Ver i f y act ual measur ement s/ openi ngs by f i el d measur ement s bef or e f abr i cat i on; show r ecor ded measur ement s on shop dr awi ngs. Coor di nat e f i el d measur ement s, f abr i cat i on schedul ed wi t h const r uct i on pr ogr ess t o avoi d const r uct i on del ays.

1. 8 DESI GN AND PERFORMANCE CRI TERI A

Desi gn, s i ze component s, and i nst al l door por t al syst em t o wi t hst and t hese l oads wi t hout br eakage, l oss, f ai l ur e of seal s, pr oduct det er i or at i on, and ot her def ect s.

a. Dead and Li ve Loads: Det er mi ned by ASCE/ SEI 7- 10 and cal cul at ed i n accor dance wi t h appl i cabl e codes.

b. Sei smi c l oads: Desi gn and i nst al l syst em t o compl y wi t h appl i cabl e sei smi c r equi r ement s f or pr oj ect l ocat i on as def i ned by Sect i on 1613 of t he I nt er nat i onal Bui l di ng Code ( I BC) .

c. Ef f ect s of appl i cabl e wi nd l oad act i ng i nwar d and out war d nor mal t o pl ane of wal l based on mi ni mum st andar d desi gn pr oper t i es and l oads indicated.

d. Ther mal l oads and movement :

( 1) Ambi ent t emper at ur e r ange: 67 degr ees C.

( 2) Mat er i al sur f aces r ange: 100 degr ees C.

e. Pr ovi de and i nst al l weat her st r i ppi ng, ext er i or gasket s, seal ant s, and ot her accessor i es t o r esi st wat er and ai r penet r at i on.

1. 9 SUSTAI NABLE DESI GN REQUI REMENTS

1. 9. 1 Recycl ed Cont ent

Use mat er i al s wi t h r ecycl ed cont ent , cal cul at ed on t he basi s of post - i ndust r i al and pr e- consumer per cent age cont ent . See Sect i on 01 33 29, LEED DOCUMENTATI ON f or cumul at i ve t ot al r ecycl ed cont ent r equi r ement s.

Mat er i al s i n t hi s sect i on may cont ai n pr e- consumer and post - i ndust r i al r ecycl ed cont ent .

1. 10 DESI GN DATA REQUI REMENTS

Submi t cal cul at i ons t o subst ant i at e compl i ance wi t h st r uct ur al pr oper t i es and connect i on l oadi ng r equi r ement s. A r egi st er ed pr of essi onal engi neer must pr ovi de cal cul at i ons.

Submi t desi gn anal ysi s wi t h cal cul at i ons showi ng t hat t he desi gn of each di f f er ent s i ze and t ype of ent r ance and st or ef r ont uni t , sunscr een and sunshade and i t s anchor age t o t he st r uct ur e meet s t he r equi r ement s i ndi cat ed. Cal cul at i ons ver i f y i ng t he st r uct ur al per f or mance of each ent r ance and st or ef r ont pr oposed f or use, under t he gi ven l oads, must be pr epar ed and si gned by a r egi st er ed pr of essi onal engi neer . Ref l ect t he ent r ance and st or ef r ont component s, connect i ons, and anchor age devi ces t o t he st r uct ur e, as det er mi ned by t he desi gn anal ysi s, i n t he shop dr awi ngs.

W912HV-18-B-0005 SECTI ON 08 41 13 Page 9 (AM-0003)

PART 2 PRODUCTS

2. 1 MATERI ALS

2. 1. 1 Al umi num ( Ent r ances and Component s)

2. 1. 1. 1 Mat er i al St andar d

ASTM B 221 ASTM B 221M; 6063- T5 al l oy and t emper ed or JI S H 4000.

Pr ovi de door st i l e and r ai l f ace di mensi ons of t he ent r ance door s as indicated.

Pr ovi de maj or por t i ons of t he door member s at 0. 3175 cm nomi nal i n t hi ckness and gl azi ng mol di ng t o be 0. 127 cm t hi ck.

2. 1. 1. 2 Tol er ances

Ref er ence t o t ol er ances f or wal l t hi ckness and ot her cr oss- sect i onal di mensi ons of ent r ance member s ar e nomi nal and i n compl i ance wi t h Al umi num St andar ds and Dat a, publ i shed by The Al umi num Associ at i on.

Pr ovi de ei t her EPDM el ast omer i c ext r usi ons or t her mopl ast i c el ast omer gl azi ng gasket s. St r uct ur al s i l i cone seal ant i s r equi r ed.

2. 2 MANUFACTURERS

Manuf act ur er s ar e accept abl e pr ovi di ng t hey meet t he r equi r ement s speci f i ed i n t hi s sect i on and pr oj ect dr awi ngs.

2. 3 ACCESSORI ES

2. 3. 1 Fast ener s

Pr ovi de st ai nl ess st eel wher e exposed.

2. 3. 2 Per i met er Anchor s

When st eel anchor s ar e used, pr ovi de i nsul at i on bet ween st eel mat er i al and al umi num mat er i al t o pr event gal vani c act i on.

2. 3. 3 St eel Ti e Back Br acket s

Pr ovi de f act or y f i ni shed st eel t i e back br acket s as r equi r ed by sunscr een manuf act ur er t o t i e sunscr een al umi num car r i er pl at e t o st or ef r ont and wal l .

2. 3. 4 St andar d Ent r ance Har dwar e

2. 3. 4. 1 Weat her st r i ppi ng

Equi p meet i ng st i l es on pai r s of door s wi t h an adj ust abl e ast r agal ut i l i z i ng wool pi l e wi t h pol ymer i c f i n.

Pr ovi de door weat her st r i ppi ng on a s i ngl e act i ng of f set pi vot or but t hung door and f r ame ( s i ngl e or pai r s) compr i sed of a t her mopl ast i c el ast omer weat her st r i ppi ng on a t ubul ar shape wi t h a semi - r i gi d pol ymer i c backi ng.

Pr ovi de Si l l Sweep St r i ps: EPDM bl ade gasket sweep st r i p i n an al umi num

W912HV-18-B-0005 SECTI ON 08 41 13 Page 10 (AM-0003) ext r usi on appl i ed t o t he i nt er i or exposed sur f ace of t he bot t om r ai l wi t h conceal ed f ast ener s. ( Pr ovi de as necessar y t o meet speci f i ed per f or mance tests.)

2. 3. 4. 2 Thr eshol d

Pr ovi de ext r uded al umi num t hr eshol d, one pi ece per door openi ng, wi t h r i bbed sur f ace.

2. 3. 4. 3 Of f set Pi vot s

Pr ovi de manuf act ur er ' s st andar d t op and bot t om pi vot s wi t h one i nt er medi at e of f set pi vot .

2. 3. 4. 4 Pani c Devi ce

Pr ovi de manuf act ur er ' s r ecommended st andar d pani c har dwar e.

2. 3. 4. 5 Cl oser

Pr ovi de sur f ace c l oser onl y per ANSI / BHMA A156. 4.

2. 3. 4. 6 Secur i t y Lock/ Dead Lock

Pr ovi de A/ R MS 1850A l ock wi t h ( 2) A/ R 1871 cyl i nder oper at ed f l ush bol t s.

2. 3. 4. 7 Cyl i nder ( s) / Thumb- t ur n

Pr ovi de manuf act ur er ' s r ecommended st andar d.

2. 3. 4. 8 Cyl i nder Guar d

Manuf act ur er st andar d.

2. 4 RELATED MATERI ALS

2. 4. 1 Seal ant s

Ref er t o Sect i on 07 92 00 JOI NT SEALANTS. Ensur e al l seal ant s conf or m t o

AAMA 800.

2. 4. 2 Al umi num Door s and Fr ames

Ref er t o Sect i on 08 11 16, ALUMI NUM DOORS AND FRAMES.

2. 4. 3 I nt egr al Al umi num Pr oj ect ed Wi ndows

Ref er t o Sect i on 08 51 13, ALUMI NUM WI NDOWS.

2. 4. 4 Gl ass

Ref er t o Sect i on 08 81 00 GLAZI NG.

2. 5 FABRI CATI ON

2. 5. 1 Ent r ance Syst em Fabr i cat i on

Pr ovi de door cor ner const r uct i on consi st i ng of mechani cal c l i p f ast eni ng, SI GMA deep penet r at i on pl ug wel ds and 2. 8575 cm l ong f i l l et wel ds i nsi de

W912HV-18-B-0005 SECTI ON 08 41 13 Page 11 (AM-0003) and out s i de of al l f our cor ner s. Pr ovi de hook- i n t ype ext er i or gl azi ng st op wi t h EPDM gl azi ng gasket s r ei nf or ced wi t h non- st r et chabl e cor d.

Pr ovi de i nt er i or gl azi ng st op mechani cal l y f ast ened t o t he door member i ncor por at i ng a s i l i cone compat i bl e spacer used wi t h s i l i cone seal ant .

Accur at el y f i t and secur e j oi nt s and cor ner s. Make j oi nt s hai r l i ne i n appear ance. Pr epar e component s wi t h i nt er nal r ei nf or cement f or door har dwar e. Ar r ange f ast ener s and at t achment s t o conceal f r om vi ew.

Pr ovi de i nt er nal gal vani zed st eel or st ai nl ess st eel f r ame r ei nf or cement f or at t achment of sunscr eens and sunshades.

2. 5. 2 Shop Assembl y

Fabr i cat e and assembl e uni t s wi t h j oi nt s onl y at i nt er sect i on of al umi num member s wi t h hai r l i ne j oi nt s; r i gi dl y secur e, and seal ed i n accor dance wi t h manuf act ur er ' s r ecommendat i ons.

2. 5. 2. 1 Wel di ng

Conceal wel ds on al umi num member s i n accor dance wi t h AWS r ecommendat i ons or met hods r ecommended by manuf act ur er . Member s showi ng wel di ng bl oom or di scol or at i on on f i ni sh or mat er i al di st or t i on wi l l be r ej ect ed.

2. 5. 3 Fabr i cat i on Tol er ance

Fabr i cat e and assembl e uni t s wi t h j oi nt s onl y at i nt er sect i on of al umi num member s wi t h hai r l i ne j oi nt s; r i gi dl y secur e, and seal ed i n accor dance wi t h manuf act ur er ' s r ecommendat i ons.

Fabr i cat e al umi num ent r ances i n accor dance wi t h ent r ance manuf act ur er ' s pr escr i bed t ol er ances.

2. 5. 3. 1 Mat er i al Cut s

Squar e t o 0. 8 mm of f squar e, over l ar gest di mensi on; pr opor t i onat e amount of

0. 8 mm on t he t wo di mensi ons.

2. 5. 3. 2 Maxi mum Of f set

0. 4 mm i n al i gnment bet ween t wo consecut i ve member s i n l i ne, end t o end or

0. 4 mm bet ween f r ami ng member s at gl azi ng pocket cor ner s.

2. 5. 3. 3 Joi nt s

( Bet ween adj acent member s i n same assembl y: Hai r l i ne and squar e t o adj acent member .

2. 5. 3. 4 Var i at i on

I n squar i ng di agonal s f or door s and f abr i cat ed assembl i es: 1. 6 mm.

2. 5. 3. 5 Fl at ness

For door s and f abr i cat ed assembl i es: 1. 6 mm of neut r al pl ane.

W912HV-18-B-0005 SECTI ON 08 41 13 Page 12 (AM-0003)

2. 6 SOURCE QUALI TY CONTROL

2. 6. 1 Sour ce Qual i t y

Pr ovi de al umi num ent r ances speci f i ed her ei n f r om a s i ngl e sour ce.

2. 6. 1. 1 Bui l di ng Encl osur e Syst em

When al umi num ent r ances ar e par t of a bui l di ng encl osur e syst em, i ncl udi ng st or ef r ont f r ami ng, wi ndows, cur t ai n wal l syst em, sunscr eens and r el at ed pr oduct s, pr ovi de bui l di ng encl osur e syst em pr oduct s f r om a s i ngl e sour ce manufacturer.

2. 6. 2 Fabr i cat i on Tol er ances

Fabr i cat e al umi num ent r ances i n accor dance wi t h ent r ance manuf act ur er ' s pr escr i bed t ol er ances.

2. 7 SUNSCREEN

2. 7. 1 Gener al

Sunscr een shal l be an al umi num and t er r a cot t a sunscr een syst em wi t h hor i zont al member s t er r a cot t a baguet t a modul e bl ades over ext r uded al umi num i nner t ubes as i ndi cat ed. Submi t mi ni mum 150 mm pr of i l es of t er r acot t a baguet t a pr of i l e.

2. 7. 2 Fr ami ng

Ext r uded al umi num as i ndi cat ed and st andar d wi t h t he manuf act ur er , f act or y f i ni shed. Submi t st andar d and cust om col or s f or f act or y col or coat ed al umi num as i ndi cat ed or as sel ect ed by t he Conr act i ng Of f i cer . Pr ovi de neopr ene shi ms as r equi r ed.

2. 7. 3 Fast ener s

St ai nl ess st eel bol t s and scr ews.

2. 7. 4 Fi ni sh

a. Ter r acot t a: Nat ur al f i ni sh

b. Al umi num: Fact or y col or coat i ng

2. 8 SUNSHADES

2. 8. 1 Gener al

Pr ovi de al umi num l ouver ed sunshades ( l ouver ed t ype) and al umi num sunshade ( sol i d t ype) as i ndi cat ed t o conf or m wi t h desi gn dat a r equi r ement s.

2. 8. 2 Fast ener s

Pr ovi de st ai nl ess st eel f ast ener s of t ype r ecommended by t he sunshade manufacturer.

2. 8. 3 Fi ni sh

Fi ni sh shal l be anodi zed f i ni sh i dent i cal t o wi ndows as speci f i ed her ei n.

W912HV-18-B-0005 SECTI ON 08 41 13 Page 13 (AM-0003)

PART 3 EXECUTI ON

3. 1 EXAMI NATI ON

3. 1. 1 Si t e Ver i f i cat i on of Condi t i ons

Ver i f y subst r at e condi t i ons ( whi ch have been pr evi ousl y i nst al l ed under ot her sect i ons) ar e accept abl e f or pr oduct i nst al l at i on i n accor dance wi t h manuf act ur er ' s i nst r uct i ons.

Ver i f y openi ngs ar e s i zed t o r ecei ve st or ef r ont syst em and si l l pl at e i s l evel i n accor dance wi t h manuf act ur er ' s accept abl e t ol er ances.

3. 1. 2 Fi el d Measur ement s

Ver i f y act ual measur ement s/ openi ngs by f i el d measur ement s bef or e f abr i cat i on; show r ecor ded measur ement s on shop dr awi ngs. Coor di nat e f i el d measur ement s, f abr i cat i on schedul e wi t h const r uct i on pr ogr ess t o avoi d const r uct i on del ays.

3. 2 I NSTALLATI ON

I nst al l ent r ance syst em wi t h sunscr eens and sunshades i n accor dance wi t h manuf act ur er ' s i nst r uct i ons and AAMA st or ef r ont and ent r ance gui de speci f i cat i ons manual . At t ach t o st r uct ur e t o per mi t suf f i c i ent adj ust ment t o accommodat e const r uct i on t ol er ances and ot her i r r egul ar i t i es. Pr ovi de al i gnment at t achment s and shi ms t o per manent l y f ast en syst em t o bui l di ng st r uct ur e. Al i gn assembl y pl umb and l evel , f r ee of war p and t wi st .

Mai nt ai n assembl y di mensi onal t ol er ances al i gni ng wi t h adj acent wor k.

Set t hr eshol ds i n bed of mast i c and secur e. Pr ot ect al umi num member s i n cont act wi t h st eel , concr et e, or di ssi mi l ar mat er i al s usi ng nyl at r on pads or bi t umi nous coat i ng. Shi m and br ace al umi num syst em bef or e anchor i ng t o st r uct ur e. Ver i f y weep hol es ar e open, and met al j oi nt s ar e seal ed i n accor dance wi t h manuf act ur er ' s i nst al l at i on i nst r uct i ons. Seal met al t o met al j oi nt s usi ng seal ant r ecommended by syst em manuf act ur er .

3. 2. 1 Pr epar at i on

Fi el d ver i f y di mensi ons pr i or t o f abr i cat i ng door por t al assembl y component s, sunscr eens, and sunshades.

Coor di nat e r equi r ement s f or l ocat i ons of bl ockout s f or anchor age of door por t al col umns and ot her embedded component s wi t h Sect i on 03 30 00. 00 10

CAST- I N- PLACE CONCRETE.

Coor di nat e er ect i on of door por t al wi t h i nst al l at i on of sur r oundi ng gl ass wal l and door assembl i es. Ensur e adequat e pr ovi s i on i s made f or suppor t and anchor age of assembl y component s.

Coor di nat e el ect r i cal r equi r ement s f or el ect r i f i ed door har dwar e t o ensur e pr oper power sour ce, condui t , wi r i ng, and boxes.

Coor di nat e connect i on and suppor t of sunscr eens and sunshades.

3. 2. 1. 1 Adj acent Sur f aces Pr ot ect i on

Pr ot ect adj acent wor k ar eas and f i ni sh sur f aces f r om damage dur i ng pr oduct

W912HV-18-B-0005 SECTI ON 08 41 13 Page 14 (AM-0003) installation.

3. 2. 1. 2 Al umi num Sur f ace Pr ot ect i on

Pr ot ect al umi num sur f aces f r om cont act wi t h l i me, mor t ar , cement , aci ds, and ot her har mf ul cont ami nant s.

3. 2. 2 Adj ust i ng

Adj ust oper at i ng har dwar e f or smoot h oper at i on, and as r ecommended by t he manufacturer.

3. 2. 3 Rel at ed Pr oduct s I nst al l at i on Requi r ement s

3. 2. 3. 1 Seal ant s ( Per i met er )

Ref er t o Sect i on 07 92 00 JOI NT SEALANTS.

3. 2. 3. 2 Gl ass

Ref er t o Sect i on 08 81 00 GLAZI NG.

3. 2. 3. 3 Ref er ence

ANSI Z97. 1, 16 CFR 1201 and GANA Gl azi ng Manual .

3. 3 PROTECTI ON AND CLEANI NG

3. 3. 1 Pr ot ect i on

Pr ot ect i nst al l ed pr oduct ' s f i ni sh sur f aces f r om damage dur i ng const r uct i on. Pr ot ect al umi num st or ef r ont syst em f r om damage f r om gr i ndi ng and pol i shi ng compounds, l i me, aci d, cement , or ot her har mf ul cont ami nant s.

3. 3. 2 Cl eani ng

Repai r or r epl ace damaged i nst al l ed pr oduct s. Cl ean i nst al l ed pr oduct s i n accor dance wi t h manuf act ur er ' s i nst r uct i ons pr i or t o Gover nment ' s accept ance. Remove const r uct i on debr i s f r om pr oj ect s i t e and l egal l y di spose of debr i s.

3. 4 WARRANTY

Submi t t hr ee s i gned copi es of manuf act ur er ' s pr oduct war r ant y f or ent r ance syst em as f ol l ows:

War r ant y Per i od: Two year s f r om Dat e of Subst ant i al Compl et i on of t he pr oj ect , pr ovi ded t hat t he Li mi t ed War r ant y begi ns i n no event l at er t han s i x mont hs f r om dat e of shi pment by manuf act ur er . I n addi t i on, suppor t wel ded door cor ner const r uct i on wi t h a l i mi t ed l i f et i me war r ant y f or t he l i f e of t he door under nor mal use.

Ensur e War r ant y l anguage i s i dent i cal t o " As Appr oved" ver si on of t he sampl e war r ant y submi t t ed and r et ur ned f r om t he Cont r act i ng Of f i cer .

- - End of Sect i on - -

W912HV-18-B-0005 SECTI ON 08 41 13 Page 15 (AM-0003)

1.10 DESIGN DATA REQUIREMENTS

2.6.2 Fabrication Tolerances

3.4 WARRANTY