Questions and Answers for Solicitation W912GY-25-Q-0014_SAM.docx
DOCX document 16 KB Posted
- Attached to
- Workstations
- Solicitation number
- W912GY-25-Q-0014
About this file
The file is a Questions and Answers document for Solicitation W912GY-25-Q-0014, which pertains to a small business set-aside procurement by the Department of the Army Materiel Command Contracting Command Detroit Arsenal. The solicitation requires ten (10) workstations with specific technical specifications, including 16+ drawers, load capacity between 2,500-3,600 pounds, storage capacity of 25,000-30,000 cubic inches, and dimensions ranging from 60-72 inches wide, 38-42 inches high, and 24-30 inches deep. Workstations must feature 16-gauge steel construction, caster wheels, keyed locking systems, and rubberized foam or Neoprene liners in cabinet tops and drawer bottoms.
The Army intends to award a single firm fixed-price purchase order using simplified acquisition procedures under NAICS code 332439, with a small business standard of 600 employees. Contractors must be registered in the System for Award Management (SAM) and submit all contractual and technical questions in writing to the Contract Specialist, Mr. Rory Thelen, via email. The solicitation is available only through electronic medium, and offerors are responsible for continually reviewing the website for potential amendments.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Questions and Answers for Solicitation W912GY-25-Q-0014
1. Do you have a picture of the workstation you can send me?
· No pictures are available. This is a new procurement for Sierra Army Depot.
2. Do you have a preference or requirement for the height of the drawers?
· There is currently no preference or requirement for the height of the drawers. The only specifications are that the largest drawers must have a weight capacity of at least 200 pounds. The smallest drawers must have a load capacity of at least 125 pounds. The drawers must fit in a workstation meeting the length, width and depth specified in Section C of the solicitation.
4. Will end user accept options for painted surfaces to be enhanced with anti-microbial and static dissipating coatings?
· No. Painted surfaces enhanced with anti-microbial and static dissipating coatings are not part of the specifications listed in Section C of the solicitation.
5. Will drawer liners need to be static dissipating?
· No.
6. On the request it is listed to have a total of 16 drawers, would you happen to know the different heights and lengths?
· There are no specific measurements available for the drawers. The specification requires that there be at least 16 drawers, that the drawers meet the minimum weight requirements, and that they fit within a workstation of the length, width, and height parameters listed in Section C of the solicitation.
7. Do you have a drawing of the tool box?
· No drawings are available as this is a new procurement for SIAD. Offerors are responsible to quote workstations that meet the specifications listed in Section C of the solicitation.
8. Will these workstations require a chair in between the drawers?
· No. The workstations are multi-drawer, rolling toolchests with flat tops that serve as a workspace. These are not desks, so no gap or space is required for a chair.
9. Do you have any drawings or pictures of what is being requested.
· No. These workstations are a new procurement for SIAD.
10. Do you have a manufacturer part number?
· No. This is a new procurement for SIAD. Offerors are responsible for quoting a workstation that meets the specifications found in Section C of the solicitation. Offerors shall provide the National Stock Number or Manufacturer’s Part Number of the workstation.
11. Are there any requirements for compartments in the drawers?
· No.
13. Would 18-gauge material be acceptable for this project?
· Yes
14. How should proposals be submitted?
· Please email proposals directly to rory.g.thelen.civ@army.mil.
File details come from the government source that posted it. Updated .