A.02.17 Amendment 0002 SPECIFICATIONS.pdf

Specifications FY22 PN 93308 Army Family Housing (AFH) Replacement Wetzel and Smith Barracks, USAG Rheinland-Pfalz, Baumholder, Germany

US Army Corps of Engineers Amendments to 100% Corrected Design Submittal

Contract Number: W912GB19D0006 Task Order Number: W912GB20F0288

March 2023

Specifications FY22 PN 93308 Army Family Housing (AFH) Replacement Wetzel and Smith Barracks, USAG Rheinland-Pfalz, Baumholder, Germany

Prepared for: US Army Corps of Engineers AECOM

Quality information Prepared by Checked by Verified by Approved by

Deliverable Originator Checker Lead Verifier Project Manager

AECOM Team Deputy PM / Design Manager Argelia Tobias Nieto Almudena Carro Rejas

Brian Goldbach Juan Alonso

Revision History Revision Revision date Details

00 4/15/2021 35% Design Submission

01 7/16/2021 65% Design Submission

02 01/12/2022 95% Design Submission

03 03/03/2022 100% Design Submission

04 XX/04/2022 100% Corrected Design Submission

05 XX/03/2023 Amendments to 100% Corrected Design Submission

Signatures Name Position Date Signature

Deputy PM / Design Manager

Lead Verifier

Project Manager

Other

Baumholder, Germany

Prepared for: US Army Corps of Engineers AECOM

Prepared for:

US Army Corps of Engineers

Prepared by:

AECOM International, Inc.

Siemensstraße 10 63263 Neu-Isenburg Germany

T: +49 (0)6102 3050-360 F: +49 (0)6102 8136-499 aecom.com

© March 2023 AECOM International, Inc. All Rights Reserved.

This document has been prepared by AECOM International, Inc. (“AECOM”) for sole use of our client (the “Client”) in accordance with generally accepted consultancy principles, the budget for fees and the terms of reference agreed between AECOM and the Client. Any information provided by third parties and referred to herein has not been checked or verified by AECOM, unless otherwise expressly stated in the document. No third party may rely upon this document without the prior and express written agreement of AECOM.

Baumholder, Germany

Prepared for: US Army Corps of Engineers AECOM

Table of Contents

1. Introduction

Appendix A Document copies A.1 Corrected Pages

Figures

No table of figures entries found.

Tables

No table of figures entries found.

Baumholder, Germany

Prepared for: US Army Corps of Engineers AECOM

1. Introduction Following document provides amendments to provided Specifications for FY22 PN 93308 Army Family Housing (AFH) Replacement project, located in Wetzel and Smith Barracks, USAG Rheinland-Pfalz, Baumholder, Germany.

Number Section Page

1 01 22 00 PRICE AND PAYMENT PROCEDURES (NAU) 46 of 1711

2 01 22 00 PRICE AND PAYMENT PROCEDURES (NAU) 51 of 1711

3 01 22 00 PRICE AND PAYMENT PROCEDURES (NAU) 52 of 1711

4 01 22 00 PRICE AND PAYMENT PROCEDURES (NAU) 53 of 1711

5 05031 METALWORK / METALLBAUARBEITEN 347 of 1711

6 06027 CARPENTRY WORK / TISCHLERARBEITEN 352 of 1711

7 06027 CARPENTRY WORK / TISCHLERARBEITEN 354 of 1711

8 06027 CARPENTRY WORK / TISCHLERARBEITEN 355 of 1711

9 06027 CARPENTRY WORK / TISCHLERARBEITEN 356 of 1711

10 06027 CARPENTRY WORK / TISCHLERARBEITEN 357 of 1711

11 06027 CARPENTRY WORK / TISCHLERARBEITEN 358 of 1711

12 06027 CARPENTRY WORK / TISCHLERARBEITEN 359 of 1711

13 06027 CARPENTRY WORK / TISCHLERARBEITEN 360 of 1711

14 06027 CARPENTRY WORK / TISCHLERARBEITEN 361 of 1711

15 09024 TILE AND SLAB WORK / FLIESEN- UND PLATTENARBEITEN 418 of 1711

16 09024 TILE AND SLAB WORK / FLIESEN- UND PLATTENARBEITEN 422 of 1711

22045 GAS, WATER AND DRAINAGE SYSTEMS - EQUIPMENT, ELEMENTS,

PREFABRICATED BATHROOMS / GAS-, WASSER- UND ENTWÄSSERUNGSANLAGEN -

AUSSTATTUNG, ELEMENTE, FERTIGBÄDER

22045 GAS, WATER AND DRAINAGE SYSTEMS - EQUIPMENT, ELEMENTS,

PREFABRICATED BATHROOMS / GAS-, WASSER- UND ENTWÄSSERUNGSANLAGEN -

AUSSTATTUNG, ELEMENTE, FERTIGBÄDER

22045 GAS, WATER AND DRAINAGE SYSTEMS - EQUIPMENT, ELEMENTS,

PREFABRICATED BATHROOMS / GAS-, WASSER- UND ENTWÄSSERUNGSANLAGEN -

AUSSTATTUNG, ELEMENTE, FERTIGBÄDER

22045 GAS, WATER AND DRAINAGE SYSTEMS - EQUIPMENT, ELEMENTS,

PREFABRICATED BATHROOMS / GAS-, WASSER- UND ENTWÄSSERUNGSANLAGEN -

AUSSTATTUNG, ELEMENTE, FERTIGBÄDER

22045 GAS, WATER AND DRAINAGE SYSTEMS - EQUIPMENT, ELEMENTS,

PREFABRICATED BATHROOMS / GAS-, WASSER- UND ENTWÄSSERUNGSANLAGEN -

AUSSTATTUNG, ELEMENTE, FERTIGBÄDER

22 26058 LIGHTS AND LAMPS / LEUCHTEN UND LAMPEN 657 of 1711

23 28063 ALARM SYSTEMS / GEFAHRENMELDEANLAGEN 717 of 1711

24 01 22 00 PRICE AND PAYMENT PROCEDURES (NAU) 863 of 1711

25 01 22 00 PRICE AND PAYMENT PROCEDURES (NAU) 868 of 1711

26 01 22 00 PRICE AND PAYMENT PROCEDURES (NAU) 869 of 1711

27 01 22 00 PRICE AND PAYMENT PROCEDURES (NAU) 870 of 1711

28 06016 CARPENTRY AND WOOD CONSTRUCTION / ZIMMER- UND HOLZBAUARBEITEN 1171 of 1711

29 06016 CARPENTRY AND WOOD CONSTRUCTION / ZIMMER- UND HOLZBAUARBEITEN 1172 of 1711

Baumholder, Germany

Prepared for: US Army Corps of Engineers AECOM

Appendix A Document copies A.1 Corrected Pages

Section 01 22 00 Page 1

SECTION TABLE OF CONTENTS

DIVISION 01 – GENERAL REQUIREMENTS

SECTION 01 22 00

PRICE AND PAYMENT PROCEDURES (NAU)

04/21

PART 1 GENERAL

1.1. PRICE AND PAYMENT PROCEDURES

1.1.1. Single Job Payment Items

1.2. SCHEDULE OF ITEMS: BASE ITEMS

1.2.1. Base Item 0001: Demolition for Building 8832

1.2.2. Base Item 0002: 12 Three bedroom units in a single 4 story apartment building and civil works, neighborhood recreational amenities, trash collection enclosures, utilities, landscaping, and new heating plant building in Smith Barracks area

1.2.3. Base Item 0002AA: German Government Charge

1.2.4. Base Item 0003: 40 Town houses in blocks A, B, C, D, G, H and I, civil works for the complete development, neighborhood recreational amenities, trash collection enclosures, utilities, landscaping, and new heating plant building in Wetzel area

1.2.5. Base Item 0003AA: German Government Charge

1.2.6. Base Item 0004: UXO Services

1.3. SCHEDULE OF ITEMS: OPTION ITEMS

1.3.1. Awarding of Options

1.3.2. Option 1: Item 0005: Wood door in Apartments

1.3.3. Option 2: Item 0006: Electrical 120V systems in Apartments. .. 5

1.3.4. Option 3: Item 0007: Ceiling fan in Apartments

1.3.5. Option 4: Item 0008: 6 Town Houses allocated in the block E (6 units 3 bedrooms Town Houses) in Wetzel area

1.3.6. Item 0008AA: German Government Charge

1.3.7. Option 5: Item 0009: 6 Town Houses allocated in the block H (4 units 3 bedrooms Town Houses and 2 units 4 bedroom TH) in Wetzel area. 6

1.3.8. Item 0009AA: German Government Charge

1.3.9. Option 6: Item 0010: Window with shutters in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area

1.3.10. Option 7: Item 0011: Cover installations with plasterboard in garage in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area. 7

1.3.11. Option 8: Item 0012: Exterior galvanized steel stairs with handrail and concrete foundation in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area

1.3.12. Option 9: Item 0013: 120V installation in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area

1.3.13. Option 10: Item 0014: Ceiling fan in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area joseluis.cantero Cross-Out joseluis.cantero Callout F joseluis.cantero Cross-Out joseluis.cantero Callout H, joseluis.cantero Cross-Out joseluis.cantero Callout H, joseluis.cantero Cross-Out joseluis.cantero Callout H, joseluis.cantero Cross-Out joseluis.cantero Callout H, joseluis.cantero Cross-Out joseluis.cantero Callout H, Section 01 22 00 Page 6 below. The scope of work includes, but is not limited to, services, and equipment associated. Coordinate all affected and associated works for installation, operational testing, and commissioning.

1.3.5. Option 4: Item 0008: 6 Town Houses allocated in the block E (6 units 3 bedrooms Town Houses) in Wetzel area.

Unit of Measure: Job.

Payment will be made for costs associated with all new construction works for 6 Town houses in block E (6 units 3 bedrooms Town Houses) in Wetzel area, USAG Rheinland-Pfalz, Baumholder, Germany, except for those items identified as options. The scope of work includes, but is not limited to, substructure, shell, interiors, services, equipment and furnishings, special constructions & demolition and building sitework.

The site preparation and utilities work in the immediate vicinity of the existing facilities are also included.

1.3.6. Item 0008AA: German Government Charge.

The contractor must be required to make a payment to the German Government for their administrative efforts associated with this project under this item. The US Government must determine the amount of this item at the time of award and all amounts under this item must be paid directly to the German Government by the contractor.

No separate or additional payment must be made to the contractor for any effort required to make this payment: to the extent the contractor incurs any costs in making this payment, such costs for the contractor must be included in other Base Items.

Payment for this item must be made no earlier than 30 calendar days prior to the contractor making payment to the German Government. The specific payment instructions must be provided to the contractor after award and prior to payment.

1.3.7. Option 5: Item 0009: 6 Town Houses allocated in the block H (4 units 3 bedrooms Town Houses and 2 units 4 bedroom TH) in Wetzel area.

Unit of Measure: Job.

Payment will be made for costs associated with all new construction works for 6 Town Houses allocated in the block H (4 units 3 bedrooms Town Houses and 2 units 4 bedroom TH) in Wetzel area, USAG Rheinland- Pfalz, Baumholder, Germany, except for those items identified as options. The scope of work includes, but is not limited to, substructure, shell, interiors, services, equipment and furnishings, special constructions & demolition and building sitework. The site preparation and utilities work in the immediate vicinity of the existing facilities are also included.

1.3.8. Item 0009AA: German Government Charge.

The contractor must be required to make a payment to the German Government for their administrative efforts associated with this project under this item. The US Government must determine the amount of this item at the time of award and all amounts under this item must be paid directly to the German Government by the contractor.

No separate or additional payment must be made to the contractor for any effort required to make this payment: to the extent the contractor joseluis.cantero Cross-Out joseluis.cantero Callout F joseluis.cantero Cross-Out joseluis.cantero

F

Section 01 22 00 Page 7 incurs any costs in making this payment, such costs for the contractor must be included in other Base Items.

Payment for this item must be made no earlier than 30 calendar days prior to the contractor making payment to the German Government. The specific payment instructions must be provided to the contractor after award and prior to payment.

1.3.9. Option 6: Item 0010: Window with shutters in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area.

Unit of Measure: Job.

Payment will be made for costs associated with all construction works for Window with shutters in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area, USAG Rheinland-Pfalz, Baumholder, Germany, with the exception of the option items listed below. The scope of work includes, but is not limited to, services, and equipment associated.

Coordinate all affected and associated works for installation, operational testing, and commissioning.

1.3.10. Option 7: Item 0011: Cover installations with plasterboard in garage in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area.

Unit of Measure: Job.

Payment will be made for costs associated with all construction works for Cover installations with plasterboard in garage in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area, USAG Rheinland-Pfalz, Baumholder, Germany, with the exception of the option items listed below. The scope of work includes, but is not limited to, services, and equipment associated. Coordinate all affected and associated works for installation, operational testing, and commissioning.

1.3.11. Option 8: Item 0012: Exterior galvanized steel stairs with handrail and concrete foundation in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area.

Unit of Measure: Job.

Payment will be made for costs associated with all construction works for Exterior galvanized steel stairs with handrail and concrete foundation in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area, USAG Rheinland-Pfalz, Baumholder, Germany, with the exception of the option items listed below. The scope of work includes, but is not limited to, services, and equipment associated. Coordinate all affected and associated works for installation, operational testing, and commissioning.

1.3.12. Option 9: Item 0013: 120V installation in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area.

Unit of Measure: Job.

Payment will be made for costs associated with all construction works for 120V installation in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area, USAG Rheinland-Pfalz, Baumholder, Germany, with the exception of the option items listed below. The scope of work includes, but is not limited to, services, and equipment associated. Coordinate joseluis.cantero Cross-Out joseluis.cantero Callout H, joseluis.cantero Cross-Out joseluis.cantero Callout H, joseluis.cantero Cross-Out joseluis.cantero Cross-Out joseluis.cantero Callout H, joseluis.cantero Callout H, joseluis.cantero Cross-Out joseluis.cantero Callout H, joseluis.cantero Callout H, joseluis.cantero Cross-Out joseluis.cantero Cross-Out joseluis.cantero Cross-Out joseluis.cantero Callout H, joseluis.cantero

Section 01 22 00 Page 8 all affected and associated works for installation, operational testing, and commissioning.

1.3.13. Option 10: Item 0014: Ceiling fan in 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area.

Unit of Measure: Job.

Payment will be made for costs associated with all construction works for 40 Town Houses in blocks A, B, C, D, F, G, and I in Wetzel area, USAG Rheinland-Pfalz, Baumholder, Germany, with the exception of the option items listed below. The scope of work includes, but is not limited to, services, and equipment associated. Coordinate all affected and associated works for installation, operational testing, and commissioning.

1.3.14. Option 11: Item 0015: Window with shutters in 6 Town Houses in block E in Wetzel area.

Unit of Measure: Job.

Payment will be made for costs associated with all construction works for Window with shutters in 6 Town Houses in blocks E in Wetzel area, USAG Rheinland-Pfalz, Baumholder, Germany, with the exception of the option items listed below. The scope of work includes, but is not limited to, services, and equipment associated. Coordinate all affected and associated works for installation, operational testing, and commissioning.

1.3.15. Option 12: Item 0016: Cover installations with plasterboard in garage in 6 Town Houses in block E in Wetzel area.

Unit of Measure: Job.

Payment will be made for costs associated with all construction works for Cover installations with plasterboard in garage in 6 Town Houses in block E in Wetzel area, USAG Rheinland-Pfalz, Baumholder, Germany, with the exception of the option items listed below. The scope of work includes, but is not limited to, services, and equipment associated.

Coordinate all affected and associated works for installation, operational testing, and commissioning.

1.3.16. Option 13: Item 0017: Exterior galvanized steel stairs with handrail and concrete foundation in 6 Town Houses in block E in Wetzel area.

Unit of Measure: Job.

Payment will be made for costs associated with all construction works for Exterior galvanized steel stairs with handrail and concrete foundation in 6 Town Houses in block E in Wetzel area, USAG Rheinland- Pfalz, Baumholder, Germany, with the exception of the option items listed below. The scope of work includes, but is not limited to, services, and equipment associated. Coordinate all affected and associated works for installation, operational testing, and commissioning.

joseluis.cantero Cross-Out joseluis.cantero Cross-Out joseluis.cantero Callout H, joseluis.cantero

Smith Barracks Contract Number: W912GB-19-D-0006

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

900 / 2,100 mm, fire retardant for 30 min, smoke-tight and self-closing, U = 1,8 W/m²K, sound absorption coefficient Rw,P = 32 dB, peephole, kick plate, Hardware set 3.

05031.2.8 DEG02 Single Leaf Aluminum Glazed Door for Building Main Entrance DEG02. External. Single leaf with aluminum frame, glazing - 2-pane safety laminated glazing, for Building Main Entrance, W / H (rough dimensions) = 1,135 / 2,200 mm, W / H (clear dimensions) = 960 / 2,120 mm, U = 1,2 W/m²K, sound absorption coefficient Rw,P = 32 dB, Hardware set 1.

Surface treatment, color coating (powder) manufacturer’s standard white or similar to RAL 9016

– Traffic White.

05031.2.9 DEM04 Up & Over Garage Door with Ventilation Grille DEM04. External. Up and Over galvanized steel garage door (I.e. one piece, not segmented), W / H (rough dimensions) = 2,500 / 2,250 mm, W / H (clear dimensions) = 2,360 / 2,130 mm, sound absorption coefficient Rw,P = 32 dB.

Frame and leaf: galvanized steel.

Color: manufacturer standard white or similar to RAL 9016 - Traffic White.

Automatic gate opener with stainless steel drive cover with fixed wall mounted control (openable by pin code, illuminated keypad, wireless connected) and remote control.

Protection against trapping: Flexible plastic rails between the door leaf and frame and additional protective caps over the lever arms.

Multiple spring safety system.

Shaped lever arm for self-closing.

Rotary catch lock for break-in-resistance.

Gate handle in the middle, plastic star handle inside, special lock with multiple locking function with profile half cylinder and locking or unlocking pin that can be operated from the inside. 2-point locking by automatically locking plastic rotary latch (adjustable).

Polystyrene insulation, plate with roll-up plaster.

Bottom rubber end profile, including fastening clips.

With ventilation grill: W / H = ca. 600 / 100 mm, lower edge 190 mm above finished floor.

05031.2.10 DEM05 Double Leaf Door RS for Technical Rooms

DEM05. External. Double steel leaf door RS with standard manufacturer finish, factory basecoat

- painted steel frame, for Sprinkler Pump Room and Heating Room, W / H (rough dimensions)

= 1,790 / 2,205 mm, W / H (clear dimensions) = 1,615 / 2,165 mm, smoke-tight and self-closing, joseluis.cantero Cross-Out

DEM08

joseluis.cantero Cross-Out 2,375 joseluis.cantero Cross-Out 2,235 joseluis.cantero Callout

DEM08

joseluis.cantero Callout 2,375 joseluis.cantero

2,235

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

06027. CARPENTRY WORK / TISCHLERARBEITEN

06027.0 General Carpentry Work Requirements

This section includes all work associated with supply and installation of furniture in the kitchen, bedrooms, laundry, foyer and bathroom of each apartment as well as of wooden doors. The section includes kitchen cabinets, bedroom wardrobes and closets, coat closets, different shelves and wooden doors. Refer to the section 22045 for the bathroom cabinets.

Installation in accordance with the following drawings:

A-411 Kitchen

A-472 Laundry

AE121 Furnitures

AF902 Kitchen / Bathroom

AI661 Furniture Schedule

All information provided does not release the supplier from his duty of care and sole responsibility regarding the operationally safe function and execution in accordance with the generally recognized rules of technology. Any working drawings and calculations prepared by the Contractor shall be submitted prior to the start of installation. The inspection and approval of these documents does not release the contractor from the obligation to take measurements at the construction site and to ensure the correct quality and function of the system.

Within the scope of his services, the Contractor shall prepare complete documentation for all components and systems delivered and installed as described in Submittal Register and submit it to COR prior to acceptance.

All products used for the execution of the construction measure are neutrally tendered.

06027.0.1 CODES AND REGULATIONS

The standards and rules in the version valid at the time of conclusion of the contract, including amendments, corrections and supplements, shall apply in each case.

Particularly to be observed as components of the general terms and conditions of contract in the respective current versions are the generally recognized rules of technology for the respective trades, such as:

Hoffmann1, Marina Schreibmaschine A-451

Hoffmann1, Marina Schreibmaschine A-471

Hoffmann1, Marina Schreibmaschine

AE-661

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Hervorheben

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

Kitchens and equipment installation and integration

SD-10 O&M Data

Kitchen Equipment

Interior Wooden Doors

06027.0.3 COORDINATION WITH OTHER WORKS.

Contractor needs to verify the sizes and the position of the electrical appliances supplied by the

COR (fridge, range, dishwasher, oven) and coordinate the eletrical and sanitary systems

(including built-in extractor hood) with the kitchen installation. Before installation of the kitchen cabinet complete installation of electical and sanitary preinstallation have to be verified.

Coordinate placement and installations (e.g. wall anchors) with tiling (bathroom, kitchen backsplash) and technical installations (electrical, water).

Coordinate door frame fitting with drywall construction, as the steel frames need to be fitted along with the metal framework of the partition walls.

Coordinate dimensional tolerances with drywall construction to ensure accuracy and load bearing components within drywall constructions where necessary to fix the furniture on the walls.

Coordinate window sill workflow and dimensional tolerances with window construction to ensure accuracy.

06027.0.4 GENERAL TECHNICAL SPECIFICATIONS

06027.0.4.1 General

For a visual impression of the overall kitchen and bathroom designs and typical components refer to drawing AF902 and A411.

Deliver here described items undamaged and store in a safe, dry, and clean location. Handle so as to prevent damage. Therefore, all materials, products and installations shall be protected throughout the entire installation process and prior to final acceptance; special care is to be taken to ensure surfaces remain free of scratches, stains, or other damage to avoid schedule impact to the project.

Contractor to provide a set of replacement parts (such as hinges, closer, locks, knobs, shelve rods) for occasional repair and replacement. Provide 5 pieces per type.

Hoffmann1, Marina Schreibmaschine A451 and A461

Linie

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

Fasteners shall be appropriate for use with the respective wall construction.

06027.0.4.2 Kitchen

Material

3-layer chipboard, P3 in accordance with DIN EN 312, 19 mm thick, carcass, doors, drawer front, base, trim.

Exposed surfaces (such as cabinet carcass exterior, doors, panels, shelve boards) are required to be made of high-pressure laminate (HPL) in accordance with DIN EN 438, minimum 0.8 mm thick, water vapor resistant, scratch resistant, impact resistant, light-resistant, abrasion-resistant, stain-resistant and heat-resistant, on Color: manufacturer’s standard white.

Non-visible surfaces (carcass interior sides, shelves, panel edges, etc) to have melamine coating on all sides, with 2 mm plastic edging in the same color, all narrow edges glued around. Color:

manufacturer’s standard white.

All base cabinets with plastic furniture feet, H approx. 150 mm, rot-proof, height adjustable, with brackets for fastening the plinth fastening. Material / Finish as the cabinets.

Drawers with full-extension runners with soft-close automatic. Minimum loading capacity per drawer: 25 kg.

Base cabinets to be delivered with furniture feet made of plastic, one on each corner of the cabinet, height about 15cm (per drawings), rot-proof, height-adjustable, with brackets for mounting the base.

Kitchen cabinet doors shall be hinged with cup hinges with automatic closing, door hinge DIN right

/ DIN left, according to plans. Cabinet shelves to be height adjustable and fixed with pins.

Embedded and flush-mounted door and drawer handle profile strip aluminum stainless steel color, height

40 mm, 2500 x 19.8 mm (L x D), useful length 2450 mm, dowel length 10 mm; stainless steel colored anodized (E6)

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

Provide seamless, rounded corners at counter nosing and at the intersection of the countertop and the backsplash. The wall area between the top of the base cabinets and the bottom of the upper cabinets shall be surfaced with ceramic tiles or wall covering that complements the countertop.

Kitchen countertops

Material: 40 mm Chipboard ,P5, formaldehyde-free

Visible surface, visible edges etc.:

HPL, thickness approx. 0.8 mm, abrasion and impact resistant, heat resistant and resistant to common household chemicals, with 2mm ABS glueing in identical color, all narrow edges glued around. Color: light marble look or similar.

Including silicone jointing in the transition area to rising rear and side walls, color shade to match countertop and according to samples.

One kitchen base cabinet door and one drawer shall be provided with child-safe closing hardware for storage of cleaning supplies. Child safety device will neither require key nor a locking cylinder.

Submit proposed locking device prior to final contract agreement.

All colors and finishes are as described in AF-902. Where the color is not explicitly specified herein it is to be determined per color/material sample and COR choice, as a part of the Submittal Process.

Execution in accordance with architectural drawings A-411 and A-431.

06027.0.4.3 General Buil-In Furniture

Material: 3-layer chipboard, P3 in accordance with DIN EN 312, 19 mm thick, carcass, doors, drawer front, base, trim. RAL 9010.

Exposed surfaces (such as cabinet carcass exterior, doors, panels, shelve boards) are required to be made of high-pressure laminate (HPL) in accordance with DIN EN 438, minimum 0.8 mm thick, water vapor resistant, scratch resistant, impact resistant, light-resistant, abrasion-resistant, stain-resistant and heat-resistant, on Color: manufacturer’s standard white.

Non-visible surfaces (carcass interior sides, shelves, panel edges, etc) to have melamine coating on all sides, with 2 mm plastic edging in the same color, all narrow edges glued around. Color:

manufacturer’s standard white.

Hoffmann1, Marina Schreibmaschine A-451

Hoffmann1, Marina Schreibmaschine A-471

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine Including self-adhesive closure profile to the surrounding walls, support profile PVC, surface aluminum white, 15 x15 mm section, concave profile. To be installed in one piece lenght of the countertop. Connection part at the corners only. End caps.

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

All base cabinets with plastic furniture feet, H approx. 150 mm, rot-proof, height adjustable, with brackets for fastening the plinth fastening. Material / Finish as the cabinets.

06027.0.4.4 Wooden Doors:

Refer to drawing AI501 for plan and section details.

Refer to drawings AI601 and AI602 for configuration, openings, materials and finishes, accessories and hardware sets, setting out points and dimensions, location, fire performance or acoustic and thermal properties.

Refer to drawings A-101, A-111 and AF-121 for doors plan location.

Following specifications apply to all wooden door positions:

06027.0.4.5 Door Frames:

Wrap-around frame, two-piece, Material: Steel, reveal assembly in various wall types, standard factory basecoat.

Door frames are to be delivered with manufacturer’s standard white similar to colors RAL 9003 signal white, RAL 9016 Traffic White.

Refer to color board in drawing AF901 for finishes and color samples.

Refer to door schedule in drawing AI602 for materials and finishes definition for each door type.

06027.0.4.6 Door Leaves:

Single leaf, single fold, flush-closing, material: solid chipboard, 40 mm, factory basecoat and paint, climate class II, stress group M, door handles in 1000 mm height above finished floor, door hinge

DIN right / DIN left according to plans, U = 1,8 W/m²K.

Door leaves are to be delivered with manufacturer’s standard white similar to colors RAL 9003 signal white, RAL 9016 Traffic White.

Refer to color board in drawing AF901 for finishes and color samples.

Refer to door schedule in drawing AI602 for materials and finishes definition for each door type.

For definition of Hardware Sets refer to section 08029 Hardware work and the Door Schedule on the sheet AI-602.

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

06027.0.5 EXECUTION, QUALITY, and TESTING

Seal all skirting with a sealing profile (sealing lip) at the bottom edge. Joints between worktop and wall or rear wall paneling elastoplastic sealed, color matched to wall covering. Connections of sink and refrigerator must be included.

Execute works in accordance with the design drawings and following approval of submittals where applicable. Provide a fully functional and integrated kitchen, bathroom, laundry and bedroom furnishing.

Ensure correct functioning of all moving parts, proper installation of door leafs with even and parallel joints and edges.

Remove all packing materials and other trash from the jobsite. Upon completion of installation, all products must be clean, including inside all drawers and doors, and the area must be free of debris and left in a clean and neat condition. Any defects in or damage to furniture must be repaired or replaced and approved by the Contracting Officer. Damaged products that cannot be satisfactorily repaired must be replaced. Correct any problems with assembly and installation. Prior to any furniture repair, replacement, and/or assembly and installation corrections, protect the building surfaces.

06027.1 Kitchen Furnishings

06027.1.1 Modular Kitchen cabinets with counter and sink, U-shape Kitchen Built-in furnishing: Asymmetric U-shape layout, mainly assembled of modular low and high cabinets, shelving units and countertop.

Max. Length: 3,410 mm

Max. Width: 3,050 mm

Height: 2,400 mm

Connection bottom: to floor

Connection top: to suspended ceiling via 100 mm high trim full length of the kitchen cabinets

Execution in accordance with architectural drawings A-411, A-451, AF902.

Modules are:

Base Cabinet W / D / H = ca. 600 / 600 / 870 mm, single leaf swing door, one inlaid shelf board

Hoffmann1, Marina Linie

Hoffmann1, Marina Kommentar sheet deleted

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine upper

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine base

Hoffmann1, Marina Schreibmaschine Height of base cabinets with countertop must not exceed 865 mm from the top of the finished floor.

Hoffmann1, Marina Hervorheben

Hoffmann1, Marina Schreibmaschine two

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine s

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Linie

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

Base Cabinet W / D / H = ca. 900 / 600 / 870 mm, double leaf swing doors, one inlaid shelf board

Corner Cabinet with L-shaped footprint: W / L / H = ca. 930 / 860 / 870 mm, single revolving door, one inlaid revolving shelf board

Corner Cabinet with L-shaped footprint: W / L / H = ca. 1,020/ 810 / 870 mm, single revolving door, one inlaid revolving shelf board

Base Cabinet : W / D / H = ca. 900 / 600 / 870 mm, double leaf swing doors, one inlaid shelf board

Drawers Cabinet Unit: W / D / H = ca. 600 / 600 / 870 mm, 2 drawers

Drawers Cabinet Unit: W / D / H = ca. 450 / 600 / 870 mm, 4 drawers

Upper Open Shelving Units: W / D / H = ca. 640 / 290 / 900 mm, no doors. two shelf boards

Upper Open Shelving Units: W / D / H = ca. 860 / 290 / 900 mm, no doors, two shelf boards

Upper Closed Wall Cabinet Shelving Unit for the Extractor Hood: W / D / H = ca. 800 / 400 /

900 mm, double leaf swing doors, two inlaid shelf boards

Upper Closed Wall Cabinet: W / D / H = ca. 900 / 290 / 900 mm, double leaf swing doors, two inlaid shelf boards

Upper Closed Wall Cabinet: W / D / H = ca. 450 / 290 / 900 mm, single leaf swing door, two inlaid shelf boards

Upper Closed Wall Cabinet W / D / H = ca. 600 / 290 / 900 mm, single leaf swing door, two inlaid shelf boards

Pantry Unit: W / D / H = ca. 600 / 600 / 2400 mm, two single leaf swing doors, four inlaid shelf boards

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine one

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine five

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine 1,040

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine

DELETE!

Hoffmann1, Marina Schreibmaschine

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

Countertop (breakfast bar): L-shape, W / L / H = ca. 900 / 2330 / 40 mm

Countertop (sink area): L-shape, W / L / H = ca. 930 / 2810 / 40 mm

Inset Sink with two bowls, stainless steel, satin finish, W / D / H = ca. 750 / 530 / 180 mm

Built-In recirculating Hood, Stainless steel, W / D / H = ca. 800 / 360 / 25 mm, 3 different fan speeds, energy efficiency class: A+ or better, annual energy consumption <= 40 kWh/a, air flow at maximum speed in normal use: >= 630 m³/h, Airborne acoustical A-weighted sound power emissions at minimum speed available in normal use: <= 45 dB, Airborne acoustical A-weighted sound power emissions at maximum speed available in normal use: <= 65 dB, Grease Filter removal and suitable for dish washer, Grease Efficiency at least 85 %, Power consumption in

Off mode or standby mode: 0 Watt, built-in LED downlights

Front Panel on the backside of the cabinets below the breakfast bar: L / H = ca. 2,330 / 870 mm

Continuous panel along top edge, stretching from extractor hood unit to pantry unit: L / H = ca.

3920 / 100 mm

LED lighting strip integrate into kitchen cabinets:

LED lighting strip: to be mounted in a straight line on the bottom side of the high cabinets, parallel to the unit front, light: min. 950 Lumen bright, light color: warm white, light color temperature: 3,000

Kelvin, voltage: 230V AC (50 Hz), height: max. 32 mm, color: white, L = ca. 3160 mm

06027.2 General built-in furniture

06027.2.1 Modular Bedroom Wardrobe, floor to ceiling

Modular Bedroom Wardrobe, floor to ceiling, incl. Interiors and doors

Wardrobe Unit: W / D / H = ca. 910 / 600 / 2360 mm, double leaf swing doors, two inlaid shelf boards

Execution in accordance with architectural drawings AE121, A481.

06027.2.2 Modular Linen Closets , floor to ceiling

Modular Linen Closets , floor to ceiling, incl. Interiors and doors

Linen Closet Unit: W / D / H = ca. 1100 / 600 / 2360 mm, double leaf swing doors, two inlaid

Hoffmann1, Marina Hervorheben

Hoffmann1, Marina Schreibmaschine 860 x 500 x 160 min

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine Provide remote control for accessibility.

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine Two part

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine 2-part L-shaped countertop, 40 mm thickness. Part A, W/L ca 900x1715 mm. Part B, W/L = 600/1320 mm.

Hoffmann1, Marina Schreibmaschine 2-part L-shaped countertop, 40 mm thickness. Part A, W/L ca. 600x2200 mm. Part B, W/L ca. 600/940 mm.

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine Top mount

Hoffmann1, Marina Textfeld Basin dimensions 340 x 420 x 160 mm und 340 x 420 x 160 mm, Volumen 2 x 16 L

Hoffmann1, Marina Schreibmaschine

- Side panel at the end of the breakfast bar: L/H = ca. 600 / 825

Hoffmann1, Marina Linie

Hoffmann1, Marina Textfeld Provide breakfast end bar panels, 19 mm 3-layer chipboard, P3,HPL to match countertop finish:

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Schreibmaschine Install wall connection panels flush with the carcass. Material and surface as for the carcass.

Hoffmann1, Marina Schreibmaschine and closet rod.

Hoffmann1, Marina Linie

Hoffmann1, Marina four

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

shelf boards

Execution in accordance with architectural drawings AE121.

06027.2.3 Modular Entrance Coat Closet, floor to ceiling

Modular Entrance Coat Closet, floor to ceiling, incl. Interiors and doors, Coat Closet: W / D / H = ca. 910 / 600 / 2360 mm, no doors, including 2 inlaid shelf boards and clothes rails

Execution in accordance with architectural drawings AE121.

06027.2.4 Modular Bedroom Closet - Master Walk-in-closet, floor to c.

Modular Bedroom Closet - Master Walk-in-closet, floor to ceiling, incl. Interiors, no doors

Open Shelving Units: W / D / H = ca. 1525 / 600 / 2360 mm, no doors, two inlaid shelf boards, including clothes rails in two heights

Execution in accordance with architectural drawings A-481.

06027.2.5 Shelving Units

Shelving Units: W / D / H = ca. 855 / 600 / 2360 mm, no doors, five inlaid shelf boards

Execution in accordance with architectural drawings AE121.

06027.2.6 Shelves in Laundry on Wall

Wall-Mounted Shelves in Laundry

3 x Wall-Mounted Shelves: W / D / H = ca. 1525 / 300 / 30 mm, no doors

Execution in accordance with architectural drawings A-431.

06027.2.7 Built-in Bathroom Shelving

Built-In Bathroom Shelving

Cabinet recessed in dry wall: W / D / H = ca. 340 / 245 / 1040 mm, no doors, three inlaid shelf boards

Shelves: to be height adjustable and fixed with pins.

Execution in accordance with architectural drawings A-421.

06027.3 Miscellaneous Joinery Works

Hoffmann1, Marina Schreibmaschine A-461

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine A-471

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine and A-481

Hoffmann1, Marina Schreibmaschine . Install wall connection panels flush with the carcass. Material and surface as for the carcass.

Hoffmann1, Marina Textfeld Shelf: 19 mm particleboard, melamine-coated, color: RAL 9010, load capacity up to 40 kg Brackets: Heavy-duty L-profile with cross bar, white lacquered,2 per shelf, load capacity in pairs up to 150 kg

Hoffmann1, Marina Schreibmaschine and A-481

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine

Hoffmann1, Marina Schreibmaschine four

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine Provide solid wood 10x30mm support profiles on the side walls - drywall on one and bedroom closet on other. melamine-coated. Color to match shelves.

Hoffmann1, Marina Textfeld 19 mm chipboard, melamine-coated, color: RAL 9010, load capacity up to 40 kg

Hoffmann1, Marina Schreibmaschine and AE-121

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine six

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine , L=750 mm

Hoffmann1, Marina Schreibmaschine Install wall connection panels flush with the carcass. Material and surface as for the carcass.

Hoffmann1, Marina and A-481

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

09024.0.5.6 Joints are to be straight, with a 2 mm joint width in a joint-coordinated pattern (cross joints). Start point as indicated in drawings A-411, A-421, A-431, A-501.

Necessary joints in the mortar bed must be applied at regular intervals between 2m and 5m, depending on the expected thermal expansion pursuant to the ZDB flyer, so that uncontrolled cracking is ruled out (DIN 18202).

09024.0.5.7 Tiles: Closed wall surfaces: Start with placement of a whole wall tile in the reference point as in drawings A-411, A-421, A-431. Wall surfaces are to be divided symmetrically. Sliced tiles are only allowed on room corners and must be larger than half a tile if applicable, so that in the corners several rows of tiles are to be cut. The cut tile rows is to be the same width.

Edge trim is to be applied on the external corners

Floor tiles: Start with placement of a whole floor tile in the reference point as in drawings A-501, A-

421, A-43.

The tiling situation is to be clarified and approved before executed.

09024.0.5.8 There must be no rigid connection between wall based tiles and the covering;

elastic jointing is required here.

09024.1. Ceramic wall tiles 600x300mm adhered to substrate with tile adhesive and 2mm joints grouted Wall tiles including adhesive and grout.

Material: Ceramic tiles, manufacturer’s standard white similar to RAL 9003 - Signal white

Tile format: 30/60 cm

Joint dimension: 2 mm

Surface: flat, polished tiles

The tile coverings must offer the following quality characteristics and features:

- easy to maintain

- color and lightfast

- resistant to scratches

- non-flammable

- no carbonization

- without smell

- pressure and shockproof

- not degradable

Hoffmann1, Marina Schreibmaschine A-451

Hoffmann1, Marina Schreibmaschine A-471

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine A-461

Hoffmann1, Marina Schreibmaschine A-451

Hoffmann1, Marina Schreibmaschine A-471

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine A-461

Hoffmann1, Marina Kommentar sheets A411, A421, A431 deleted

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina

A-461 and A-471

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

Installation method: thin-bed method (tile adhesive)

09024.10 Revision access steel frame H/W 44/60cm

Revision access steel frame H/W 44/60cm with impregnated plasterboard insert. To be installed according to the tile plan as indicated in A-421, including cutting and grouting of the tiles.

To be installed after the tile work.

Frame material : stainless steel

Fittings : galvanized steel

Color: white RAL9016

Inspection door inspection flap magnetic for invisible inspection openings.

Installation: Drywall, clear finish on plasterboard surfaces

Hoffmann1, Marina Schreibmaschine A-461

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

Concealed cistern with actuation from the front, condensation water insulated

Ceramic fixings M 12, fixing distance 18 cm or 23 cm

Wall-hung toilets with connection dimensions according to DIN EN 33: 2011-11

Wall-hung toilets with a projection of up to 62 cm

Suitable for 1-volume, 2-volume or flush-stop flushing self-supporting dry construction element with powder-coated frame

Galvanized footrests, adjustable 0-20 cm, non-slip

Technical Data:

Flush volume: 6 and 3 l

Large flush volume setting range: 4.5 / 6 / 7.5 l

Small flush volume setting range: 3-4 l

Calculated flow: 0.11 l / s

3. Flush plate for dual flush

Material: Plate and pushbuttons: white

Design rings: high polish chrome

Size:

Width: 246 mm

Height: 164 mm

Depth: 15 mm

22045.1.2 Bathtub

The bathtub element consists of the following parts:

1. Bathtub

Material: Sanitary acrylic

Color: manufacturer's standard white or similar to RAL 9016 - traffic white, glossy

Coating: without coating

Size:

Length: 180 cm

Width: 80 cm

Height: 46.5 cm

Adjustable feet: 18.5cm max.

Built-in bathtub, rectangular

Eccentric central outlet, drain hole dia 52mm

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine Interior depth: 40 cm max.

Hoffmann1, Marina Schreibmaschine 13 cm max., top of the bathtub max. 43 cm above the finished floor

Hoffmann1, Marina Linie

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

212l total water capacity

Tap hole drilling according to EN 232 possible

Without anti-slip surface

With round overflow at 38cm

2. Thermostatic shower mixer with shower set, for wall mounting

Material: metal / plastic

Color: chrome

Size:

Length shower hose: 620-640 mm

Handle Position: left and right

3. Bath drain and overflow set for bathtubs

Material: plastic

Overflow discharge rate 0.65l/s

With flexible connection to fit to different bathtub sizes

4. Tiled bathtub apron:

Waterproof polystyrene rigid foam core

Panel dimensions: 1800 x 600 mm

Thickness: 30 mm

Height-adjustable feet for precise fitting under the tub rim

With Mortar coating on both sides directly suitable for tiling

Compression resistant

Bending resistant

5. Revision Opening in bathtub apron:

System for invisible closing of inspection openings in wall coverings made of tiles.

Size: 30 x 60 cm

Consisting of six aluminum angle parts with molded receiving baskets, in which magnets are attached lateral and of six associated counter plates made of ferromagnetic metal.

22045.1.3 Bathtub faucet

Single-lever bath mixer for wall mounting

Hoffmann1, Marina Schreibmaschine 160 l

Hoffmann1, Marina Linie

Hoffmann1, Marina Textfeld diameter 52mm

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

Material: brass

Color: chrome

Approximate size:

Throat: 166mm

Number of consumers: 2

Handle position: above

Max. water consumption of the fitting at 3 bar: 20th

Proper sealing of the areas behind fittings with sealing tapes (DIN 18534)

22045.1.4 Wall mounted vanity unit and wash basin

1. Wash basin with protection of the ceramic surfaces with 2 tap holes and overflow

Material: Sanitary ceramic

Color: manufacturer’s standard white or similar to RAL 9016 - traffic white

Coating: with protection of the ceramic surfaces

Size:

Length: 120 cm

Depth: 48,5 cm

Wash basin position: in the middle

With overflow

2 tap holes

Underside wash basin: unpolished

2. Faucet

Single-lever basin mixer, M-Size with pop-up waste set

Material: brass

Color: chrome

Size:

Height: 168 mm

Projection: 122 mm

Number of tape holes: 1

Connection type: high pressure

Hoffmann1, Marina Streckenzug

Hoffmann1, Marina Schreibmaschine with extended control leveler

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

Max. water consumption of faucet at 3 bar (l/m): 5.7

3. Vanity cabinet with 2 pull-out compartments, full-extension runners with soft-close mechanism.

Size:

Width: 180cm

Depth: 60 cm

Height: 26 cm

Installed in the 3-sided wall recess.

Fronts made from MDF coated with acid-resistant two-component lacquer, three-coat paint finish, white, RAL 9016, 30 percent gloss.

Vanity carcass made from 19mm, 3-layered chipboard, P3, with melamine coating white with plastic edges, 2 mm ABS resin white, incl. metal hinges, chrome

Embedded and flush-mounted handle aluminum profile strip, height 40 mm, 2500 x 19.8 mm

(L x D), dowel length 10 mm; chrome finish

One pull-out compartment shall be provided with child-safe closing hardware for storage of cleaning supplies. Child safety device will neither require key nor a locking cylinder. Submit proposed locking device prior to final contract agreement.

4. Vanity Countertop

Size:

Width: 180cm

Depth: 60 cm

Installed in the 3-sided wall recess.

Material: chipboard P5, formaldehyde-free, D = 40 mm

Surface visible surface, visible edges etc.:

HPL, thickness approx. 0.8 mm, abrasion and impact resistant, heat resistant and resistant to common household chemicals, with 2mm ABS gluing in identical color, all narrow edges glued around. Color: light marble look or similar.

Including silicone jointing in the transition area to rising rear and side walls, color shade to match countertop and according to samples.

5. ‘P’ odor trapMaterial: PVC

Color: white

Size: 32mm diameter waste

Hoffmann1, Marina Schreibmaschine Provide one cabinet with 2 pull out drawers on each side of the vanity countertop, total of 2 per bathroom.

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine 40 cm

Hoffmann1, Marina Schreibmaschine 52 cm

Hoffmann1, Marina Linie

Hoffmann1, Marina Linie

Hoffmann1, Marina Schreibmaschine Provide heavy duty cabinet hanger.

The recommended maximum load of 120 kg/piece according to the DIN EN 14749, DIN EN 14688 and DIN ISO 7170.

Material: galvanizes steel

Hoffmann1, Marina Pfeil

Hoffmann1, Marina continue

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

Color: black matt

Shape: rectangular

22045.2.7 Toilet brush

Toilet brush with Brush bowl and holder

Material: stainless steel

Color: black painted

Brush: disposable plastic brush

Wall attachment without drilling, with special adhesive pad for easy installation on all smooth surfaces.

22045.2.8 Bath curtain rail

Bath curtain rail

Material: stainless steel

Finish: Polished

Wall mounted, screwed on the wall sides

22045.2.9 Grab bars

Grab bar with concealed mounting (cover plate)

Material: stainless steel

Finish: chrome

Style: angular modern

Size:

Width: minimum bathtub 61, behind WC (tilt) 91.5 and next to WC 10.65 cm

Depth: 7 cm

Height: 7,62 cm

Installation type: wall mounted with screws and mounting hardware provided by manufacturer, mounting height as indicated in the drawings A-421. Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the grab bar, fastener, mounting device, or supporting structure

Hoffmann1, Marina Schreibmaschine A-461

Ref. No. Work Specification

AECOM UNCLASSIFIED // FOR OFFICIAL USE ONLY

Ballasts, generators or drivers must have clear markings indicating multi-level outputs and indicate proper terminals for the various outputs.

26058.0.4.5 Lighting and control

Manual controls must match in design and color with faceplates and frames used for power, TV and data outlets.

For further technical specifications of specific groups of items refer to following notes below:

Lighting Control Within Dwelling Units

26058.0.4.6 Lighting in General Areas

Installation integrated kitchen lights in accordance with following drawings: A-411 Kitchen

26058.0.5 EXECUTION, QUALITY, AND TESTING

For information about execution, testing and close out refer to individual items and to 1. Codes and regulations.

26058.1 Lighting…