Flag Pole Installation ec45ih.pdf
PDF 313 KB Posted
- Attached to
- Dump Station Removal & Area Improvement Federal contract opportunity
- Solicitation number
- W912ES24Q0137
About this file
This document appears to be a Solicitation for a federal contract opportunity issued by the U.S. Army Corps of Engineers, St. Paul District, for the removal of an existing dump station and area improvement at the Cross Lake Recreation Area in Crosslake, Minnesota.
The key details include the scope of work to remove the dump station, install new concrete sidewalks, supply and install a new pergola with swing, bike rack, landscaping, and flagpole installation. The contractor is required to provide all equipment, labor, and materials, and follow building specifications and local, county, and national safety standards. The work must be completed by June 27, 2025. Contractors are encouraged to perform a site visit prior to submitting their quotes. The solicitation includes detailed requirements for submittals, a work plan, safety plan, and cleanup. The Contracting Officer Representative and point of contact at the worksite are also provided.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 24Q0137 Amendment 2.pdf | ||
| SOW Attachments 2.pdf | ||
| 24Q0137 Amendment.pdf | ||
| Flagpole - internal-halyard-installation-instructions-2017.pdf | ||
| 24Q0137 Solicitation.pdf | ||
| SOW Attachments.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Single sheave truck, cast aluminum revolving, non-fouling, internal halyard truck
Aluminum flash collar
3000 PSI concrete
Hardwood wedges (supplied by others)
Dry sand tightly tamped after aligning pole Foundation sleeve -16 ga hot dip galvanized steel
Steel centering wedges
1/4" Steel base plate
1/4" Steel support plate welded to grounding spike
Project:
Location:
Architect:
Contractor Customer:
EDER FLAG
MANUFACTURING COMPANY
1000 W. Rawson Avenue Oak Creek, WI 53154
Date:
Revision:
Job:
Model EC45 IH
9" 14"
10"
Ground set tapered aluminum flagpole: ALLOY: 6063T6 Exposed height: 45'-0" Overall height: 49'-0" Ship in 2 sections Butt diameter: 8" Top diameter: 3-1/2" Wall thickness: .188" Finish: 100 grit polish
Winch Detail
1/8" x 7x19 Mil-C-5424 Stainless steel aircraft cable
Gearless, self locking direct drive winch with six tumbler cylinder lock
Standard flag arrangement:
8' x 12'
E xp os ed h ei gh t:
5'
-0
O ve ra ll le ng th
'-0
Ta pe re d po rti on
'-2
S tra ig ht p or tio n:
6'
-1 0"
A cc es s do or
'-0
Fo un da tio n:
'-6
4' -0
Revolving non-fouling internal halyard truck, cast aluminum body, 26 stainless steel ball bearings, and 2-1/2" diameter plated steel sheave.
All shafts with overall length of more than 38'-6" are shipped in two sections.
Each section matched marked for field assembly.
Exposed portion of jam sleeve must be well lubricated prior to assembly.
1-1/2" maximum shop gap allowed for field fitting (ram for tight joint)18"
48"
Neoprene coated 2" diameter steel counterweight
Nylon beaded retainer ring
File details come from the government source that posted it. Updated .