AMD 9-11-2020 Att 2 FID Bragg Human Performance Training Center THOR3-Fitness Equipment.pdf

Furniture Item Descriptions (FID) – AMENDED 9-11-2020 Ft. Bragg – Human Performance Training Center THOR3 Fitness Equipment, PN TBD

Attachment #2 Page 1 of 113

Attachment #2

Furniture Item Descriptions (FID)

ADMIN RM

Attachment #2 Page 2 of 113

TABLE OF CONTENTS PAGE NO.

1.0 GENERAL

1.1 Submittal Requirements

1.1.1 RFQ Response

1.1.2 Non-Conforming RFQ Response

1.2 Submittal and Clarifications Format

1.3 Post Award Submittal

1.4 Contractor General Notes

2.0 Construction Requirements - Panel Supported Work Stations – NOT USED

3.0 Construction Requirements - Freestanding Integrated Desk Systems – NOT USED... 10

4.0 Construction Requirements - Metal/Laminate Desks – NOT USED

5.0 Construction Requirements - Metal/Laminate Open Frame Technical Work Stations –

NOT USED

6.0 Construction Requirements - Metal Furniture: Lateral Files, Vertical Files, Storage

Towers/Cabinets, and Bookcases – NOT USED

7.0 Construction Requirements - Laminate Tables, Metal Bases – NOT USED

8.0 Construction Requirements - Laminate Training Tables – NOT USED

9.0 Construction Requirements - Wood Casegoods, Executive II – NOT USED

10.0 Construction Requirements - Wood Casegoods, Executive III – NOT USED

11.0 Construction Requirements - Wood Conference Tables, Executive II – NOT USED

12.0 Construction Requirements - Wood Conference Tables, Executive III – NOT USED... 10

13.0 Construction Requirements - Laminate Casegoods – NOT USED

14.0 Construction Requirements - Laminate Conference Tables – NOT USED

15.0 Construction Requirements - Ergonomic Seating – NOT USED

16.0 Construction Requirements - Executive Seating – NOT USED

17.0 Construction Requirements - Ergonomic Task Stool – NOT USED

18.0 Construction Requirements - Traditional Executive Seating – NOT USED

19.0 Construction Requirements - Seating, Metal Frame – NOT USED

20.0 Construction Requirements - Seating, Tablet Arm – NOT USED

21.0 Construction Requirements - Seating, Wood Frame – NOT USED

22.0 Construction Requirements - Lounge Seating – NOT USED

23.0 Construction Requirements - Industrial Storage Cabinet – NOT USED

24.0 Ancillary Items – NOT USED

25.0 Construction Requirements - Benching Systems - NOT USED

26.0 Construction Requirements - Console Systems – NOT USED

27.0 Construction Requirements – Fitness Equipment

27.1 Item No. E1: Power Rack

27.2 Item No. E2: High Bridge

27.3 Item No. E3: Adjustable Bench

27.4 Item No. E4: Performance Bar

27.5 Item No. E5: Olympic Hex Bar

27.6 Item No. E6: Large Hex Bar

27.7 Item No. E7: Safety Squat Bar

27.8 Item No. E8: Curl Bar

27.9 Item No. E9: Farmer’s Walk Bars

27.10 Item No. E10: 2” Fat Bar

Attachment #2 Page 3 of 113

27.11 Item No. E11: 2.5” Fat Bar

27.12 Item No. E12: Tsunami Bar Set

27.13 Item No. E13: Earthquake Bar

27.14 Item No. E14: Fat Grip Bars

27.15 Item No. E15: Weight Collars

27.16 Item No. E16: Landmine Attachment

27.17 Item No. E17: Urethane Bumper Plate, 45lbs, Printed

27.18 Item No. E18: Urethane Bumper Plate, 35lbs, Printed

27.19 Item No. E19: Urethane Bumper Plate, 25lbs, Printed

27.20 Item No. E20: Urethane Bumper Plate, 10lbs, Printed

27.21 Item No. E21: Urethane Olympic Weight Plates, 100lbs

27.22 Item No. E22: Urethane Olympic Weight Plates, 45lbs

27.23 Item No. E23: Urethane Olympic Weight Plates, 25lbs

27.24 Item No. E24: Urethane Olympic Weight Plates, 10lbs

27.25 Item No. E25: Urethane Olympic Weight Plates, 5lbs

27.26 Item No. E26: Urethane Olympic Weight Plates, 2.5lbs

27.27 Item No. E27: Plate Storage, Vertical

27.28 Item No. E28: Urethane Dumbbell Set, 5-52.5lb

27.29 Item No. E29: Urethane Dumbbell Set, 55-100lb

27.30 Item No. E30: Urethane Dumbbell Set, 105-150lb

27.31 Item No. E31: Urethane Dumbbell Set, 1-10lb

27.32 Item No. E32: Dumbbell Rack

27.33 Item No. E33: Power Block

27.34 Item No. E34: Competition Kettlebell Set, 8kg-32kg

27.35 Item No. E35: Kettlebell Rack

27.36 Item No. E36: Kettlebell Set, 2kg-22kg

27.37 Item No. E37: Medicine Ball Set, Soft

27.38 Item No. E38: Medicine Ball Set, Hard

27.39 Item No. E39: Small Medicine Ball Rack

27.40 Item No. E40: Bar Attachment Storage

27.41 Item No. E41: Bar Stands

27.42 Item No. E42: Straight Bar Attachment

27.43 Item No. E43: Row/Chinning Bar Attachment

27.44 Item No. E44: Tricep Pressdown Bar Attachment

27.45 Item No. E45: Triceps Rope Attachment

27.46 Item No. E46: Handles Attachment

27.47 Item No. E47: Pulldown Bar Attachment

27.48 Item No. E48: Triangle Attachment

27.49 Item No. E49: Dip Belt

27.50 Item No. E50: T-Handle

27.51 Item No. E51: Suspension Trainer

27.52 Item No. E52: Battle Rope

27.53 Item No. E53: Plyosafe Boxes, Set of 3

27.54 Item No. E54: Push/Pull Sled

27.55 Item No. E55: Rolling Sled

27.56 Item No. E56: Inverse Leg Curl, Plate Loaded

27.57 Item No. E57: Posterior Chain Developer

Attachment #2 Page 4 of 113

27.58 Item No. E58: Unilateral/Bilateral Leg Press, Plate Loaded

27.59 Item No. E59: Kneeling Leg Curl, Plate Loaded

27.60 Item No. E60: Low Row, Plate Loaded

27.61 Item No. E61: Lat Pulldown, Plate Loaded

27.62 Item No. E62: 4-Way Neck, Plate Loaded

27.63 Item No. E63: Gripper

27.64 Item No. E64: Tibia Dorsi Flexion, Plate-Loaded

27.65 Item No. E65: Core Super Stretch

27.66 Item No. E66: Pro XL Treadmill

27.67 Item No. E67: Curve XL Treadmill

27.68 Item No. E68: Boost Treadmill

27.69 Item No. E69: Elliptical Cross Trainer

27.70 Item No. E70: Concept II Rower

27.71 Item No. E71: Recumbent Bike

27.72 Item No. E72: Monark Bike

27.73 Item No. E73: Stair Mill

27.74 Item No. E74: Versaclimber

27.75 Item No. E75: Jacobs Ladder

27.76 Item No. E76: Endless Rope

27.77 Item No. E77: Ski Erg

27.78 Item No. E78: Bike Erg

27.79 Item No. E79: Upper Body Bike

27.80 Item No. E80: Power Plate

27.81 Item No. E81: Swiss Swing

27.82 Item No. E82: Shuttle MVP

27.83 Item No. E83: Foam Roller

27.84 Item No. E84: Vibrating Foam Roller

27.85 Item No. E85: Foam Roller Rack

27.86 Item No. E86: Yoga Block

27.87 Item No. E87: Shoulder Horn

27.88 Item No. E88: 65CM Stability Ball

27.89 Item No. E89: Bosu Ball

27.90 Item No. E90: Bosu Rack

27.91 Item No. E91: Balance Steps

27.92 Item No. E92: Airex Balance Pad

27.93 Item No. E93: BAPS Board

27.94 Item No. E94: Core Board

27.95 Item No. E96: Stretch Cage

27.96 Item No. E97: Stretch Trainer

27.97 Item No. E98: Calf Wedge

27.98 Item No. E99: Stretch Straps

27.99 Item No. E100: Double Pro Stretch

27.100 Item No. E101: Thera Canes

27.101 Item No. E102: Thera Band Oval Pad, Green

27.102 Item No. E103: Thera Band Oval Pad, Blue

27.103 Item No. E104: Thera Band Oval Pad, Black

27.104 Item No. E105: Dyna Disc

Attachment #2 Page 5 of 113

27.105 Item No. E106: Wrist Roller

27.106 Item No. E107: Large Medicine Ball Rack

27.107 Item No. E108: Power Web Set

27.108 Item No. E109: RNT Bands

27.109 Item No. E110: Large Strength Bands, ¼”

27.110 Item No. E111: Large Strength Bands, ½”

27.111 Item No. E112: Large Strength Bands, ¾”

27.112 Item No. E113: Large Strength Bands, 1”

27.113 Item No. E114: Large Strength Bands, 1-1/8”

27.114 Item No. E115: Large Strength Bands, 1-1/2”

27.115 Item No. E116: Large Strength Bands, 1-3/4”

27.116 Item No. E117: Large Strength Bands, 2”

27.117 Item No. E118: Large Strength Bands, 2-1/2”

27.118 Item No. E119: Large Strength Bands, 3-1/4”

27.119 Item No. E120: Large Strength Bands, 4”

27.120 Item No. E121: Exercise Tubing, X-Light

27.121 Item No. E122: Exercise Tubing, Light

27.122 Item No. E123: Exercise Tubing, Medium

27.123 Item No. E124: Exercise Tubing, Heavy

27.124 Item No. E125: Exercise Tubing, X-Heavy

27.125 Item No. E126: Mini Bands, Set

27.126 Item No. E127: Weight Vest

27.127 Item No. E128: Hyper Vest, Large

27.128 Item No. E129: Hyper Vest, X-Large

27.129 Item No. E130: Weight Vest Rack

27.130 Item No. E131: Ankle Weight Set, 5lb

27.131 Item No. E132: Ankle Weight Set, 10lb

27.132 Item No. E133: DuoBall

27.133 Item No. E134: Lacrosse Ball

27.134 Item No. E135: Soft Mini Weighted Ball Set

27.135 Item No. E136: Muscle Glider/Stick Roller

27.136 Item No. E137: Ab Wheels

27.137 Item No. E138: Reaction Ball Set

27.138 Item No. E139: Slide Board

27.139 Item No. E140: UCS Hurdle

27.140 Item No. E141: Mini Hurdles, 6”

27.141 Item No. E142: Mini Hurdles, 12”

27.142 Item No. E143: Agility Bag, 6”

27.143 Item No. E144: Agility Bag, 12”

27.144 Item No. E145: Agility Ladder

27.145 Item No. E146: Power Stride Ladder

27.146 Item No. E147: Cones

27.147 Item No. E148: Bullet Belt

27.148 Item No. E149: The Cat

27.149 Item No. E150: Vertimax Raptor, 4-8lb

27.150 Item No. E151: Vertimax Raptor, 8-16lb

27.151 Item No. E152: Vertimax Raptor, 12-24lb

Attachment #2 Page 6 of 113

27.152 Item No. E153: Leather Jump Ropes

27.153 Item No. E154: Heavy Ropes Set

27.154 Item No. E155: Speed Rope

27.155 Item No. E156: Vertec

27.156 Item No. E157: Fit Lights

27.157 Item No. E158: Blazepods

27.158 Item No. E159: Weight Scale

27.159 Item No. E160: Tape Measure

27.160 Item No. E161: Measurement Wheel

27.161 Item No. E162: Stopwatch

27.162 Item No. E163: Timer

27.163 Item No. E164: Chalk

27.164 Item No. E165: Chalk Stand

27.165 Item No. E166: Sanitation Station, Metal

27.166 Item No. E167: Hydrocollator

27.167 Item No. E168: Recovery System

27.168 Item No. E169: Deep Muscle Stimulator

27.169 Item No. E170: Performance Plate

27.170 Item No. E171: Portable Performance Plate

27.171 Item No. E172: Heart Rate Monitor

27.172 Item No. E173: Air Compressor

27.173 Item No. E174: Interactive Light Board

27.174 Item No. E175: Massage Chair

27.175 Item No. E176: Lounge Chair

27.176 Item No. E177: Lounge Chair and Ottoman

27.177 Item No. E178: Freestanding Mobile Privacy Partition

Attachment #2 Page 7 of 113

1.0 General

Item descriptions and quality requirements, as described in the FID (Furniture Item Descriptions), are for the quality, functional performance and design intent of the furnishings required for this project. Products quoted that meet all functional and quality requirements, including all salient features listed in the product descriptions, will be considered responsive provided they are fully compliant with the RFQ requirements.

Compliance shall be determined by performance, features, quality, design intent, and value. Any item descriptions, salient features or quality requirements listed within this document are not intended to be proprietary.

1.1 Submittal Requirements

All manufacturers shall provide manufacturer’s technical documentation and manufacturer’s construction specifications for each item quoted for verification the proposed products meet all requirements listed in the FID. The RFQ response shall be submitted in the format outlined below.

1.1.1 RFQ Response

RFQ technical responses are the documents which, together with contractual documents (SF18, SF30, Attachment 1 in Excel), make up an overall RFQ response (the quote). RFQ technical responses shall be clearly organized into (1) Adobe Acrobat (PDF) document. The PDF document shall be searchable and include book marks for each item number and be organized per item number of the FID. Each RFQ is a separate contract activity, and specifications from previous projects will not be retrieved and reviewed. All product specifications and information presented shall be legible.

All technical documentation related to each item number shall be located within the same tab in the RFQ response and shall be submitted in the following order:

1. Product Information Required for Each Item Number:

a. Item number for each product submitted in the RFQ response.

b. Manufacturer, product line, and model number for each item and its components.

c. Overall dimensions.

d. Product image.

e. Fabric and finish options proposed for RFQ pricing that have been priced for each item.

2. Drawings:

a. Provide plan view drawings clearly legible and labeled showing legend of components and dimensions for each freestanding desk and panel-supported work station, including clusters.

b. Provide elevations or isometrics.

i. Elevations required with stacking/segmented drawings for panel tiles

c. Electrical and data shall be on a separate drawing from itemized component drawing. Drawing shall be clearly legible and labeled, identifying all locations of electrical and data/communication outlets.

Attachment #2 Page 8 of 113

3. Product Specific Compliance Documentation:

a. Provide published, detailed, technical documentation including, but not limited to, specification guides, price catalogs, and manufacturer’s published GSA Price List to demonstrate compliance with requirements.

b. Highlight, circle, or mark the model, size, type, and any optional features proposed in the RFQ response.

4. Technical Supporting Compliance Documentation:

a. Provide manufacturer’s technical and construction specifications demonstrating compliance to requirements.

b. Documentation shall only be submitted once for multiple items from the same product line.

c. Clearly indicate the item numbers that submitted documentation supports.

5. Testing Documentation:

a. Contractors are NOT required to submit testing documentation with quotes; however, the Contracting Officer reserves the right to request actual copies of test reports at any time before or after award.

6. Environmental Documentation:

a. Contractors are NOT required to submit environmental documentation with quotes; however, the Contracting Officer reserves the right to request actual copies of environmental documentation at any time before or after award.

b. Provide certification for Indoor Air Quality (GREENGUARD or equivalent).

c. Provide documentation regarding recycled content and recyclability for all products submitted.

7. Warranty Documentation:

a. Warranty documentation is required to be submitted for seating only.

b. Contractors are NOT required to submit warranty documentation with quotes; however, the Contracting Officer reserves the right to request actual copies of warranties at any time before or after award.

c. Although all other items do not require warranty documentation, the contractor is responsible for providing warranty coverage as required in the FID.

d. Provide any additional or extended warranty that exceeds manufacturer’s standard warranty; extended warranty shall be clearly stated on manufacturer’s letterhead and include a verifiable digital signature containing encryption or handwritten signature, date, and title of the company official accepting technical responsibility.

e. Some warranties may exceed GSA warranties. Refer to item descriptions for specific warranty requirements by product type.

1.1.2 Non-Conforming RFQ Response

Submittal of product brochures shall not be acceptable in place of technical documentation or construction specifications. Submittal of a general price list containing large amounts of items not relevant to the procurement is not acceptable. Extended warranties shall not be typed onto the manufacturer’s current warranty. Submittals not in compliance with Section 1.1.1 of the FID shall be considered non-conforming and declined.

Attachment #2 Page 9 of 113

1.2 Submittal and Clarifications Format

The RFQ shall be submitted via electronic communications as stated in Section 1.1.1.

The technical supporting documentation shall be submitted in a searchable Adobe Acrobat (PDF) document and organized and bookmarked by item number of the FID.

Embedded objects, i.e. embedded links, files, images within clarification responses, shall be considered non-conforming.

1.3 Post Award Submittal

Refer to Statement of Work (SOW).

1.4 Contractor General Notes

1. All products proposed to be installed within one office, suite, or area shall consist of items of one style and finish. All products shall be free of rough or sharp edges.

Proposed products shall include all components necessary to provide a complete and stable unit. Items shall have consistent quality standards as described and required in the FID.

2. Although such work is not specifically indicated, furnish and install all supplementary or miscellaneous items, appurtenances, and devices incidental to, or necessary for, sound, secure, and complete installation.

3. Awarded contractor is responsible for verifying all existing field conditions i.e.

including, but not limited to base-infeed requirements and electrical conditions.

Contractor shall coordinate with power plans

4. Provide end user with a full color way of textiles and varying colored fabrics within the same manufacturer or graded in range for selection after award.

5. Awarded contractor shall coordinate locations of equipment with end user.

6. Plans provided may not match project requirements in all instances. Follow FID descriptions and configurations and Attachment 1 quantities and locations.

7. Provide a proposed layout of fitness equipment to show appropriate clearances.

END OF SECTION

Attachment #2 Page 10 of 113

2.0 Construction Requirements - Panel Supported Work Stations – NOT USED

3.0 Construction Requirements - Freestanding Integrated Desk Systems – NOT USED

4.0 Construction Requirements - Metal/Laminate Desks – NOT USED

5.0 Construction Requirements - Metal/Laminate Open Frame Technical Work

Stations – NOT USED

6.0 Construction Requirements - Metal Furniture: Lateral Files, Vertical Files, Storage

Towers/Cabinets, and Bookcases – NOT USED

7.0 Construction Requirements - Laminate Tables, Metal Bases – NOT USED

8.0 Construction Requirements - Laminate Training Tables – NOT USED

9.0 Construction Requirements - Wood Casegoods, Executive II – NOT USED

10.0 Construction Requirements - Wood Casegoods, Executive III – NOT USED

11.0 Construction Requirements - Wood Conference Tables, Executive II – NOT USED

12.0 Construction Requirements - Wood Conference Tables, Executive III – NOT USED

13.0 Construction Requirements - Laminate Casegoods – NOT USED

14.0 Construction Requirements - Laminate Conference Tables – NOT USED

15.0 Construction Requirements - Ergonomic Seating – NOT USED

16.0 Construction Requirements - Executive Seating – NOT USED

17.0 Construction Requirements - Ergonomic Task Stool – NOT USED

18.0 Construction Requirements - Traditional Executive Seating – NOT USED

19.0 Construction Requirements - Seating, Metal Frame – NOT USED

20.0 Construction Requirements - Seating, Tablet Arm – NOT USED

21.0 Construction Requirements - Seating, Wood Frame – NOT USED

22.0 Construction Requirements - Lounge Seating – NOT USED

23.0 Construction Requirements - Industrial Storage Cabinet – NOT USED

24.0 Ancillary Items – NOT USED

Attachment #2 Page 11 of 113

25.0 Construction Requirements - Benching Systems - NOT USED

26.0 Construction Requirements - Console Systems – NOT USED

27.0 Construction Requirements – Fitness Equipment

Warranty Requirements:

1. Manufacturer’s Standard Commercial Warranty

General Requirements:

1. Joints shall be welded.

2. Non-marring floor glides and/or levelers.

3. All equipment shall be commercial rated and have a manufacturer’s standard commercial warranty.

27.1 Item No. E1: Power Rack

Overall Dimensions: 72”W x 94-95”D x 90-110”H

a. Full racks with attachments and storage

b. Rack uprights shall be 4” x 3” 7 gauge steel with laser cut notches and UHMW plastic (for protection against plates/barbells)

c. 1” Holes shall be on the 4” side of the upright for rack attachments

d. (15) Slots for hooks and accessories

e. (5) Peg weight storage pins on each side

i. Bottom peg is 11”L; each peg above is incrementally 2” shorter

Researched product lines:

PowerLift –Rack

Item image is for general illustration purposes only, and it is not an exact representation of the requirement.

Attachment #2 Page 12 of 113

ii. UHMW plastic cover at end of each peg along with a cover

f. (4) Movable rhino bar catches with double pin to attach to rack

g. 20” x 22” Bumper plate storage with adjustable dividers

h. (2) Rack attached landmines; sleeve shall hold standard Olympic bar

i. (2) Dual grip chin-up bars with angled ends; handles are 18” apart

j. (4) Dual grip chin handles

k. Provide (2) band, bar and chain storage

l. Hybrid uprights

m. (2) Pair of full 7 gauge steel 2” x 3” spotter bars each with 2 safety pins

n. (8) Band attachments, (4) below, (4) at top

o. (1) Ladder pull-up attachment with 1” bar, 1.5” bar, 2.5” bar, and 2” spheres

p. (4) Post-mounted rack balls; 3” or 4” diameter

q. (4) 40” x 16” Technique trays with double pin to attach to rack

r. (2) Set of spotter platforms, folding

s. (2) Dip attachments

t. (4) Jammer arms with double pin to attach to rack

i. Rhino bar catches can be attached

ii. Shall allow for easy transition between upper and lower body movements

iii. Shall have a peg on each arm for weight plates

u. Shall be fully compatible with item E2

v. Manufacturer’s standard commercial warranty

Finish:

a. Manufacturer shall be able to provide custom paint colors for squat rack and components

27.2 Item No. E2: High Bridge

Overall Dimensions: 72”W x 3”D x 3”H

a. 11 gauge steel, minimum

b. Shall connect between racks and have chin-up bar

c. Shall be fully compatible with item E1

PowerLift – Connecting Bridge Chin Up Handle

Attachment #2 Page 13 of 113

d. Manufacturer’s standard commercial warranty

a. Manufacturer shall be able to provide custom paint colors for components

27.3 Item No. E3: Adjustable Bench

Overall Dimensions: 30”W x 49.75”D x 19”H

a. 0-90 Degree adjustable bench

b. Angle options shall include (6) positions, minimum:

i. Shall include 0, 15, 30, 45, 60, 80/90 degrees

c. Seat angle adjust when back angle is adjusted

d. Back and seat pads

e. Built-in wheels and handles for easy transport

f. Bench shall store upright when not in use

g. Manufacturer’s standard commercial warranty

Finish:

a. Vinyl: Manufacturer’s standard selections

b. Metal: Manufacturer shall be able to provide custom paint colors

27.4 Item No. E4: Performance Bar

Loadable Sleeve Length: 14” minimum

Sorinex Rogue Rage Fitness PowerLift – Lever Action Bench

Researched product lines:

Sorinex Rogue

Perform Better

Attachment #2 Page 14 of 113

a. Olympic Bar, 7’L

b. 20kg Weight

c. 28mm Diameter

d. Roller and needle bearing construction

e. Knurling on bar with knurl marks

f. Meets IWF competition standards

g. Loadable zinc sleeves

h. Manufacturer’s standard commercial warranty

a. Manufacturer’s standard selection shall include bright zinc

27.5 Item No. E5: Olympic Hex Bar

Overall Dimensions: 56”L x 25”W

a. Olympic combo hex bar

Researched product lines:

Perform Better – Olympic Combo Hex Bar Rogue-Trap Bar Promaxima-Trap Bar High Tech Professional Strength Systems-American Barbell Hex Trap Bar

Attachment #2 Page 15 of 113

b. Bar for weightlifting, powerlifting and multi-use

c. Loadable sleeves, 10” minimum

d. Manufacturer’s standard commercial warranty

a. Bar: Manufacturer’s standard selection

27.6 Item No. E6: Large Hex Bar

Overall Dimensions: 88”L x 28.25”W

a. Combo hex bar

b. Weighs 60-85lbs.

c. Bar for weightlifting, powerlifting and multi-use

d. Loadable sleeves, 16” minimum

e. Manufacturer’s standard commercial warranty

a. Bar: Manufacturer’s standard selection

27.7 Item No. E7: Safety Squat Bar

Overall Length: 87.5-89”

Perform Better – Mega Trap Bar Rogue-Trap Bar Promaxima-Trap Bar High Tech Professional Strength Systems-American Barbell Hex Trap Bar

Researched product lines:

Sorinex – Safety Squat Bar Rogue – Safety Squat Bar Promaxima – Olympic Safety Squat Bar Perform Better – Safety Squat Bar Gopher Sports – Cambered Safety Squat Bar

Attachment #2 Page 16 of 113

a. Cambered bar with padding for neck and shoulders and protruding handles

b. Minimum (10) needle bearings

c. Loadable sleeves, 13-16” minimum

d. Weighs 60-70lbs.

e. Manufacturer’s standard commercial warranty

a. Manufacturer’s standard selection

27.8 Item No. E8: Curl Bar

Overall Length: 47-54.5”

Researched product lines:

Rogue – Curl Bar Promaxima – Olympic Power Curl Bar Perform Better – Olympic Curl Bar Gopher Sports – Curl Bar

Attachment #2 Page 17 of 113

a. Cambered bar

b. Knurling on bar with knurl marks

c. Loadable sleeves, 10.5” minimum

d. Weighs 17-30lbs.

e. 1-1.25” grip

f. Manufacturer’s standard commercial warranty

27.9 Item No. E9: Farmer’s Walk Bars

Overall Length: 60” minimum

a. Bars with 1-1.25” diameter handles

b. Loadable sleeves, 12” minimum

c. Manufacturer’s standard commercial warranty

27.10 Item No. E10: 2” Fat Bar

Overall Length: 86” minimum

Sorinex - Farmer’s Walk Handles Rogue – Farmers Walk Handles Promaxima – Farmer’s Walk Logs

New York Barbells – 2” Fat Bar

Attachment #2 Page 18 of 113

a. Bar with 2” grip

b. Knurling on bar with knurl marks

c. 400lbs. capacity

d. Loadable sleeves, 14” minimum

e. Item shall be from the same manufacturer as Item No. E11

f. Manufacturer’s standard commercial warranty

27.11 Item No. E11: 2.5” Fat Bar

Overall Length: 86” minimum

a. Bar with 2” grip

b. Knurling on bar with knurl marks

c. 600lbs. capacity

d. Loadable sleeves, 14” minimum

e. Item shall be from the same manufacturer as Item No. E10

f. Manufacturer’s standard commercial warranty

27.12 Item No. E12: Tsunami Bar Set

New York Barbells – 2.5” Fat Bar

Perform Better – Tsunami Bars

Attachment #2 Page 19 of 113

a. Flexible barbells; set shall contain (3) bars:

i. 11lbs. bar – 72”L

a) Load capacity 10-25lbs.

ii. 13lbs. bar - 78”L

a) Load capacity 25-45lbs.

iii. 15lbs. bar – 90”L

a) Load capacity 45-135lbs.

b. Loadable sleeves

c. Shall include collars

27.13 Item No. E13: Earthquake Bar

a. Flexible barbell made of hardened ash wood with a composite resin center

b. 6-8.75lb Bar – 80-87”L

c. Load capacity 300lbs.

d. 2” Grooves cut into wood channel sleeve

27.14 Item No. E14: Fat Grip Bars

Perform Better – Earthquake Bar Rogue – Bandbell Bar

Power Lift – Thick Bars

Attachment #2 Page 20 of 113

a. Set of (3) thick barbells:

i. 2”, 20lbs.

ii. 2.5”, 35lbs.

iii. 3”, 53lbs.

b. Loadable sleeves

c. Rust resistant

27.15 Item No. E15: Weight Collars

a. Pair of safety clamps to prevent weights from falling off weight bar

b. Lever, cam lock; “snap key”

c. Manufacturer’s standard commercial warranty

a. Clamps: Manufacturer’s standard selection

27.16 Item No. E16: Landmine Attachment

Overall Length: 47-54.5”

Perform Better – Muscle Clamp Weight Collars Life Fitness- Life Fitness-Lock Jaw ACC-CL-1001-02 Ivanko-Olympic Collars with Grip

Researched product lines:

Purmotion – Renegade Varsity Rogue – Post Landmine Promaxima – Landmine post Gopher Sports – Renegade Varsity Landmine Trainer

Attachment #2 Page 21 of 113

a. Landmine attachment that mounts in the center hole of a weight plate

b. Promotes diagonal strength training

c. Olympic bar sleeve shall fit into insert

d. Portable design

27.17 Item No. E17: Urethane Bumper Plate, 45lbs, Printed

a. Competition quality urethane rubber and steel bumper plate

b. Solid black with colored ring (blue) on edge to denote weight

c. Shall be IWF standard diameter with collar opening and plate thickness

Researched product lines:

Uesaka Bumper Plates Promaxima Sorinex Rogue

Attachment #2 Page 22 of 113

d. Steel center insert

e. Plates shall allow minimum bounce

f. Item shall be from the same manufacturer as Item Nos. E18, E19, E20

g. 4 year warranty, minimum

a. Manufacturer shall be able to provide custom color and logo options

27.18 Item No. E18: Urethane Bumper Plate, 35lbs, Printed

b. Solid black with colored ring (yellow) on edge to denote weight

c. Shall be IWF standard diameter with collar opening and plate thickness

d. Steel center insert

e. Plates shall allow minimum bounce

f. Item shall be from the same manufacturer as Item Nos. E17, E19, E20

27.19 Item No. E19: Urethane Bumper Plate, 25lbs, Printed

b. Solid black with colored ring (green) on edge to denote weight

c. Shall be IWF standard diameter with collar opening and plate thickness

d. Steel center insert

e. Plates shall allow minimum bounce

f. Item shall be from the same manufacturer as Item Nos. E17, E18, E20

g. 4 year warranty, minimum

Researched product lines:

Uesaka Bumper Plates Promaxima Sorinex Rogue Rage Fitness

Researched product lines:

Uesaka Bumper Plates Promaxima Sorinex

Attachment #2 Page 23 of 113

27.20 Item No. E20: Urethane Bumper Plate, 10lbs, Printed

b. Solid black with colored ring (black) on edge to denote weight

c. Shall be IWF standard diameter with collar opening and plate thickness

d. Steel center insert

e. Plates shall allow minimum bounce

f. Item shall be from the same manufacturer as Item Nos. E17, E18, E19

27.21 Item No. E21: Urethane Olympic Weight Plates, 100lbs

a. Urethane coating to prevent chipping, rusting, scratching

b. Provide 12-Sided plates, if available

Researched product lines:

Uesaka Bumper Plates Promaxima Sorinex Rogue Rage Fitness

Researched product lines:

Iron Grip – Urethane Olympic Weight Plate Sorinex – Bosco Bumpers

Attachment #2 Page 24 of 113

c. Handles for loading/moving

d. Integrated metal sleeve

e. Item shall be from the same manufacturer as Item Nos. E22, E23, E24, E25, E26

f. Manufacturer’s standard commercial warranty

a. Urethane Plates: Manufacturer’s standard selection

27.22 Item No. E22: Urethane Olympic Weight Plates, 45lbs

b. Provide 12-Sided plates, if available

c. Handles for loading/moving

d. Integrated metal sleeve

e. Item shall be from the same manufacturer as Item Nos. E21, E23, E24, E25, E26

27.23 Item No. E23: Urethane Olympic Weight Plates, 25lbs

b. Provide 12-Sided plates, if available

c. Handles for loading/moving

d. Integrated metal sleeve

e. Item shall be from the same manufacturer as Item Nos. E21, E22, E24, E25, E26

Rogue – Urethane Grip Plate Life Fitness Hammer Strength HS-OP Promaxima-Olympic Plates

Researched product lines:

Iron Grip – Urethane Olympic Weight Plate Rogue – Urethane Grip Plate Life Fitness Hammer Strength HS-OP Promaxima-Olympic Plates

Attachment #2 Page 25 of 113

27.24 Item No. E24: Urethane Olympic Weight Plates, 10lbs

b. Provide 12-Sided plates, if available

c. Handles for loading/moving

d. Integrated metal sleeve

e. Item shall be from the same manufacturer as Item Nos. E21, E22, E23, E25, E26

27.25 Item No. E25: Urethane Olympic Weight Plates, 5lbs

b. Provide 12-Sided plates, if available

c. Handles for loading/moving

d. Integrated metal sleeve

e. Item shall be from the same manufacturer as Item Nos. E21, E22, E23, E24, E26

27.26 Item No. E26: Urethane Olympic Weight Plates, 2.5lbs

Rogue – Urethane Grip Plate Life Fitness Hammer Strength HS-OP Promaxima-Olympic Plates

Researched product lines:

Iron Grip – Urethane Olympic Weight Plate Rogue – Urethane Grip Plate Life Fitness Hammer Strength HS-OP Promaxima-Olympic Plates

Researched product lines:

Iron Grip – Urethane Olympic Weight Plate Rogue – Urethane Grip Plate Life Fitness Hammer Strength HS-OP Promaxima-Olympic Plates

Attachment #2 Page 26 of 113

a. Urethane coating to prevent chipping, rusting, scratching

b. Provide 12-Sided plates, if available

c. Handles for loading/moving

d. Integrated metal sleeve

e. Item shall be from the same manufacturer as Item Nos. E21, E22, E23, E24, E25

27.27 Item No. E27: Plate Storage, Vertical

a. Metal storage rack for bumper and urethane weight plates

b. Shall have tiered storage posts for traditional plate sizes

c. Large footprint base with rubberized footpads

d. Item shall coordinate with Item Nos. E17-E20 and E21-E26

a. Manufacturer’s standard powder coat paint selection

27.28 Item No. E28: Urethane Dumbbell Set, 5-52.5lb

Gopher – IronRange Plate Storage Tree Rogue – Vertical Plate Tree 2.0 Perform Better – Olympic Plate Tree

Attachment #2 Page 27 of 113

a. Set of (14) pairs of dumbbells ranging from 5lbs to 52.5lbs in 2.5lb increments

b. Provide 12-sided anti-roll dumbbells

c. Impact resistant premium urethane coating

d. 1.75” Diameter handles shall be press-fit and welded to produce a one-piece solid dumbbell

e. Item shall be from the same manufacturer as Item Nos. E29, E30

f. 6 year warranty, minimum

a. Manufacturer’s standard selection shall include black

27.29 Item No. E29: Urethane Dumbbell Set, 55-100lb

a. Set of (10) pairs of dumbbells ranging from 55lbs to 100lbs in 5lb increments

b. Provide 12-sided anti-roll dumbbells

c. Impact resistant premium urethane coating

d. 1.75” Diameter handles shall be press-fit and welded to produce a one-piece solid dumbbell

e. Item shall be from the same manufacturer as Item Nos. E28, E30

Sorinex

Researched product lines:

Sorinex

Attachment #2 Page 28 of 113

27.30 Item No. E30: Urethane Dumbbell Set, 105-150lb

a. Set of (10) pairs of dumbbells ranging from 105lbs to 150lbs in 5lb increments

b. Provide 12-sided anti-roll dumbbells

c. Impact resistant premium urethane coating

d. 1.75” Diameter handles shall be press-fit and welded to produce a one-piece solid dumbbell

e. Item shall be from the same manufacturer as Item Nos. E28, E29

27.31 Item No. E31: Urethane Dumbbell Set, 1-10lb

a. Provide a complete set of pairs of dumbbells of 1lb, 2lb, 3lb, 4lb, 5lb, 7.5lb, 10lb

b. Impact resistant premium urethane coating

c. Handles shall be press-fit and welded to produce a one-piece solid dumbbell

d. Manufacturer’s standard warranty

Sorinex Rogue Rage Fitness

Researched product lines:

Sorinex

Attachment #2 Page 29 of 113

27.32 Item No. E32: Dumbbell Rack

Overall Dimensions: 97-100 120”W x 26-30”D x 36-38”H

a. Provide commercial quality dumbbell rack

b. 3-Tier dumbbell storage unit

c. Shall be capable of storing (15) pairs of dumbbells, minimum

d. 2” x 3” 7 Gauge steel frame with welded joints

e. Solid steel core dumbbell saddles with high density protective coating

f. Rack shall have rubber feet to prevent movement

g. Item shall coordinate with Item Nos. E28-E30

h. Manufacturer’s standard commercial warranty

a. Manufacturer shall be able to provide custom paint colors

27.33 Item No. E33: Power Block

Sorinex – Iron Bear Multistorage Unit

Power Block – Pro Series Expandable

Attachment #2 Page 30 of 113

a. Provide set of expandable 5-90 dumbbells; weights are incrementally added by 2.5 5

b. Urethane coated steel plates

c. Center handle with contoured rubber grip

d. Auto-Lock lever on handle

e. Side rails show color bands that correspond with weight selection

f. Selector pin is polypropylene and rated for 500lbs max load held in place by magnets

27.34 Item No. E34: Competition Kettlebell Set, 8kg-32kg

a. Set of (7) competition style kettlebells ranging from 8kg to 32kg in 4kg increments

b. Kettlebells shall be comprised of durable steel and coated with latex free material

Researched product lines:

Sorinex Rogue – Competition Kettlebell Perform Better – First Place Competition Kettlebell

Attachment #2 Page 31 of 113

c. Provide handle design to offer freedom and comfort during exercise

d. Kettlebells shall be color coded for weight identification

e. 10 year warranty, minimum

a. Kettlebell Coating: Manufacturer’s standard selection

27.35 Item No. E35: Kettlebell Rack

Overall Dimensions: 97-100”W x 26-30”D x 36-38”H

a. Provide commercial quality kettlebell rack

b. 3-Tier kettlebell storage unit

c. 2” x 3” 7 Gauge steel frame with welded joints

d. Solid steel, flat, rubber coated trays

e. Rack shall have rubber feet to prevent movement

f. Item shall coordinate with Item No. E34

g. Manufacturer’s standard commercial warranty

27.36 Item No. E36: Kettlebell Set, 2kg-22kg

Sorinex – Iron Bear Multistorage Unit

Item image is for general illustration purposes only, and it is not an exact representation of the requirement.

Perform Better – First Place Kettlebell

Attachment #2 Page 32 of 113

a. Set of (11) kettlebells ranging from 2kg to 22kg in 2kg increments

b. Kettlebells shall be comprised of durable steel and coated with latex free material

c. Provide handle design to offer freedom and comfort during exercise

d. Kettlebells shall be color coded for weight identification

e. 10 year warranty, minimum

a. Kettlebell Coating: Manufacturer’s standard selection

27.37 Item No. E37: Medicine Ball Set, Soft

a. 14” Diameter non-bouncing medicine balls

b. Heavy duty cover with reinforced stitching

c. Impact absorbing

d. Provide set to include 8lbs, 10lbs, 12lbs, 14lbs, 16lbs, 18lbs, 20lbs, 25lbs, 30lbs weights

Everything Track and Field – Gravity Kettlebell

Researched product lines:

Gopher Performance – Evolution 2.0 Medicine Balls Perform Better – Dynamax Medicine Ball Sorinex – Dynamax Standard Medicine Ball

Attachment #2 Page 33 of 113

a. Medicine ball: Manufacturer’s standard selection shall provide a variety of colors

27.38 Item No. E38: Medicine Ball Set, Hard

a. Bouncing medicine balls

b. Rubber coating on exterior for grip

c. Impact absorbing

d. Provide set to include 8lbs, 10lbs, 12lbs, 15lbs, 18lbs, 20lbs, 25lbs, 30lbs weights

a. Medicine ball: Manufacturer’s standard selection shall provide a variety of colors

27.39 Item No. E39: Small Medicine Ball Rack

Perform Better – First Place Elite Medicine Ball Rogue – Rubber Medicine Ball Promaxima – Hard Medicine Ball

Researched product lines:

Gopher Performance – UltraFit 3-shelf Medicine Ball Storage Rack Perform Better – PB Extreme Horizontal Medicine Ball Rack Rogue – 3-Tier Mass Storage System Promaxima – 3-Tier Medicine Ball Rack Powerlift – Horizontal Medicine Ball Rack

Attachment #2 Page 34 of 113

a. Provide commercial quality rack for medicine ball storage

b. 3-Tier storage unit

c. Heavy duty steel frame

d. Rack shall have casters

e. Item shall coordinate with Item No. E38

27.40 Item No. E40: Bar Attachment Storage

Overall Dimensions: 24-30”W x 30-32”D x 40-44”H

a. Provide commercial quality rack for storage of attachments and accessories

b. Holds (5) bars on storage pegs

c. Heavy gauge punched steel frame UHMW plastic to protect frame

d. 24” x 16” Accessory tray at top

e. Rack shall have rubber feet to prevent movement

f. Item shall coordinate with Item Nos. E42-E48, E50

27.41 Item No. E41: Bar Stands

Overall Dimensions: 18”W x 18”D x 8.5”H

Researched product lines:

Sorinex – Iron Bear Multistorage Unit

Attachment #2 Page 35 of 113

a. Steel barbell holder with (9) steel tubes 7”L x 2”Diameter

b. Shall store barbells vertically

a. Metal: Manufacturer’s standard selection

27.42 Item No. E42: Straight Bar Attachment

a. 20”L Revolving straight bar with hand grip covers

b. Shall have swivels or points of attachment to cable

27.43 Item No. E43: Row/Chinning Bar Attachment

a. Seated row/chin bar with hand grip covers

27.44 Item No. E44: Tricep Pressdown Bar Attachment

Overall Dimensions: 20”W x 24”D x 30”H

General Requirements:

a. Triceps pressdown V-shaped bar

Sorinex – 9-Bar Storage Unit Rogue – 9 Bar holder

Attachment #2 Page 36 of 113

27.45 Item No. E45: Triceps Rope Attachment

Overall Dimensions: 20”W x 24”D x 30”H

General Requirements:

a. Triceps rope with capped ends

a. Rope: Manufacturer’s standard selection

b. Metal: Manufacturer’s standard selection

27.46 Item No. E46: Handles Attachment

a. Set of handles with hand grips covers

27.47 Item No. E47: Pulldown Bar Attachment

a. Wide grip lat pulldown bar with hand grips covers

27.48 Item No. E48: Triangle Attachment

a. 7.5-9”L with 2” diameter handle grip

b. Shall have swivels or points of attachment to cable

Researched product lines:

Sorinex – Mighty Mitts Fat Chin Triangle Rogue – Monster Grip Triangle

Attachment #2 Page 37 of 113

27.49 Item No. E49: Dip Belt

a. Nylon belt designed to fit around user’s waist

b. 30”L Zinc-coated steel chain

c. Rust resistant

d. Carabineer attaches steel chain to belt and allows access for weights to be added onto chain

27.50 Item No. E50: T-Handle

a. Opening shall fit a standard size Olympic bar sleeve

Researched product lines:

Perform Better – Weightlifting Dip Belt Gopher – Fortify Weightlifting Dip Belt Rogue – Dip Belt

Researched product lines:

Sorinex – Landmine T-bar Handle Rogue – Straight Landmine Handle Perform Better – T-Handle

Attachment #2 Page 38 of 113

b. 32-34”L Welded steel bar, rust resistant

c. Rubber handles

27.51 Item No. E51: Suspension Trainer

a. Durable nylon webbing straps with loop-and-barrel locking adjusters and carabineer tested at 1,300lbs

b. Padded block door anchor connects to Suspension Trainer for use in any room

c. Suspension anchor for hanging straps off stabilized bars, poles, etc.

d. Manufacturer’s standard warranty

27.52 Item No. E52: Battle Rope

TRX

Researched product lines:

Perform Better – First Place 2” Training Rope Gopher – Warrior Rope Gopher Performance – Warrior Rope

Attachment #2 Page 39 of 113

a. 50ft. braided rope with a diameter no less than 2”

b. Handles

c. Manufacturer’s standard commercial warranty

a. Ropes: Manufacturer’s standard selection

27.53 Item No. E53: Plyosafe Boxes, Set of 3

a. Provide set of 3 boxes, 12”, 18”, and 24”

b. Each box is fully assembled with steel reinforced ¾” thick oak wood construction covered with foam panels and vinyl cover

c. Vinyl cover has built-in bacterial inhibitor

d. Each box has a raised lip for stacking and locking to prevent movement when stacked

e. Stainless steel handles on all boxes

a. Vinyl: Manufacturer’s standard selection

Researched product lines:

UCS – Plyo-Safe Elite Plyo-Boxes Perform Better - UCS SPS Plyo-Safe Plyobox Set

Attachment #2 Page 40 of 113

b. Wood: Manufacturer’s standard selection

27.54 Item No. E54: Push/Pull Sled

Overall Dimensions: 33-39.5”W x 32-37”D x 35-39”H

a. Push/pull/drag sled with vertical and horizontal (high and low) handles

b. Single or double loops for pulling/dragging with straps

c. (2) or (3) Vertical bars for weight plate loading

d. Vertical bars may be utilized for quick turn-around

e. Large weight capacity

f. 3-Point sled with sled runners on each

a. Metal: Manufacturer’s standard powder coat selections

27.55 Item No. E55: Rolling Sled

Overall Dimensions: 51.4”W x 31.9”D x 37.3”H

Legend Fitness – Pro series Push/Pull Power Sled Gopher Performance – Yukon 2.0 Push/Pull Sled Gopher – Grinder Speed Sled Perform Better – Extreme Triton Sled

Researched product lines:

Torque Fitness – Tank M2 Iron Company – Tank Variable Power Curve Resistance Trainer Gopher Performance – The TANK Variable Resistance Sled

Attachment #2 Page 41 of 113

a. Indoor/Outdoor sled with (4) tires

b. (3) Levels of resistance with magnetic braking system

c. Bi-directional

d. Handle grip with coating

e. Unit weight is 150lbs.

f. (2) Vertical bars for weight plate loading not to exceed 270lbs.

a. Manufacturer’s standard powder coat selection shall include black

27.56 Item No. E56: Inverse Leg Curl, Plate Loaded

Overall Dimensions: 37”W x 58”D x 64”H

Researched product lines:

Westide Barbell – Inverse Curl Rogue – Westside Inverse Curl

Attachment #2 Page 42 of 113

a. Machine shall work user’s hamstrings

b. Provide heavy gauge steel frame with weight bearing pivot points

c. Shall have knee pad and chest and ankle roller pads

d. Chest pad and ankle rollers shall incrementally adjust in height

e. Structured cushions shall be upholstered with a pliable durable material

f. Foot plate located near ankle rollers shall incrementally adjust for user’s height when horizontal

g. Shall have adjustable start/stop positions

h. Rubber hand grips

i. Machine shall have rubber feet to prevent movement

j. Manufacturer’s standard commercial warranty

Finish:

b. Metal: Manufacturer’s standard selection shall include clear coat

27.57 Item No. E57: Posterior Chain Developer

Overall Dimensions: 35-43”W x 67-78.75”D x 46-61.25”H

a. Machine shall work user’s lower back and abs, glutes and hamstrings

b. Provide heavy gauge steel frame

c. Provide foot plate at base and at ankle rollers

d. Foot plate located near ankle rollers shall incrementally adjust for user’s height when horizontal

e. Shall have pads at ankles and thigh pads with rollover

Researched product lines:

Power Lift – Posterior Chain Developer Promaxima – Combo Glute Ham Developer/Back Extension Legend Fitness – Pro Series GHDH Combo Sorinex – Frankenhyper

Attachment #2 Page 43 of 113

f. Structured cushions shall be upholstered with a pliable durable material

g. Provide swing arm with weight stack guide rods for weight plate loading

h. Swing arm shall have attachment points for straps, belts, bands, etc. to attach to

i. Provide band attachment pegs

j. Rubber hand grips

k. Machine shall have rubber feet to prevent movement

l. Manufacturer’s standard commercial warranty

Finish:

27.58 Item No. E58: Unilateral/Bilateral Leg Press, Plate Loaded Overall Dimensions: 62”W x 105”D x 63”H

a. Machine shall work user’s lower body unilaterally and bilaterally

b. Provide heavy gauge steel frame with weight bearing pivot points

c. Individual foot platforms with non-slip texture; platforms can be locked together

d. Leg press angle 40 degrees

e. Shall have a seat and back pads

f. Back pad shall be incrementally height adjustable

g. Structured cushions shall be upholstered with a pliable durable material

h. Shall have weight stack guide rods for weight plate loading

i. Shall have (6) weight stack guide rods for storage, minimum

j. Rubber hand grips

k. Machine shall have rubber feet to prevent movement

l. Manufacturer’s standard commercial warranty

Finish:

27.59 Item No. E59: Kneeling Leg Curl, Plate Loaded

Power Lift – Uni/Bi-Lateral Leg Press

Attachment #2 Page 44 of 113

Overall Dimensions: 48-52”W x 50-54”D x 48-54”H

a. Machine shall work user’s hamstrings unilaterally and bilaterally

b. Provide heavy gauge steel frame with weight bearing pivot points

c. Shall have a forearm, thigh, knee and ankle pads

d. Structured cushions shall be upholstered with a pliable durable material

e. Shall have weight stack guide rods for weight plate loading

f. Shall have (2) weight stack guide rods for storage, minimum

g. Rubber hand grips

h. Machine shall have rubber feet to prevent movement

i. Manufacturer’s standard commercial warranty

Finish:

27.60 Item No. E60: Low Row, Plate Loaded

Overall Dimensions: 53-62”W x 48-52”D x 47-57”H

Hammer Strength – Plate Loaded Iso-Lateral Kneeling Leg Curl Strength Warehouse – Kneeling Leg Curl Pro Gym Supply – Plate Loaded Iso-Lateral Kneeling Leg Curl

Researched product lines:

Hammer Strength – Plate Loaded Iso-Lateral Row Power Lift – Plate Loaded Row Pro Gym Supply – Plate Loaded Iso Lateral Low Row

Attachment #2 Page 45 of 113

a. Machine shall work user’s lats and back unilaterally and bilaterally

b. Provide heavy gauge steel frame with weight bearing pivot points

c. Shall have a seat and chest pads

d. Seat pad shall be incrementally height adjustable

e. Structured cushions shall be upholstered with a pliable durable material

f. Shall have weight stack guide rods for weight plate loading

g. Rubber hand grips with collars to prevent slippage while using

h. Hand grips shall provide standard and neutral grips

i. Machine shall have rubber feet to prevent movement

j. Manufacturer’s standard commercial warranty

Finish:

27.61 Item No. E61: Lat Pulldown, Plate Loaded

Overall Dimensions: 71-82”W x 49-57”D x 70-80”H

Researched product lines:

Hammer Strength – Plate Loaded Iso-Lateral Front Lat Pulldown Power Lift – Front Lat Pulldown Pro Gym Supply – Plate Loaded Iso Lateral Front Lat Pulldown

Attachment #2 Page 46 of 113

a. Machine shall work user’s lats unilaterally and bilaterally

b. Provide heavy gauge steel frame with weight bearing pivot points

c. Shall have a seat, chest and leg pads

d. Seat and leg pads shall be incrementally height adjustable

e. Structured cushions shall be upholstered with a pliable durable material

f. Shall have weight stack guide rods for weight plate loading

g. Shall have (6) weight stack guide rods for storage, minimum

h. Rubber hand grips with collars to prevent slippage while using

i. Hand grips shall provide standard and neutral grips

j. Machine shall have rubber feet to prevent movement

k. Manufacturer’s standard commercial warranty

Finish:

27.62 Item No. E62: 4-Way Neck, Plate Loaded

Overall Dimensions: 54-63”W x 33-46”D x 62-69”H

Researched product lines:

Hammer Strength – 4-Way Neck ProGym Supply – Plate Loaded 4-Way Neck Power Lift – 4-Way Neck

Attachment #2 Page 47 of 113

a. Machine shall work user’s neck to include anterior, posterior, lateral and flexion

b. Provide heavy gauge steel frame

c. Shall have a seat and neck pads

d. Seat shall be incrementally height adjustable

e. Structured cushions shall be upholstered with a pliable durable material

f. Shall have weight stack guide rod for weight plate loading

g. Shall have (1) weight stack guide rod for storage

h. Provide hand grips for user to stabilize

i. Machine shall have rubber feet to prevent movement

j. Manufacturer’s standard commercial warranty

Finish:

27.63 Item No. E63: Gripper

Overall Dimensions: 21-23”W x 43-48”D x 33-47”H

Researched product lines:

Life Fitness-Gripper Promaxima-Gripper

Attachment #2 Page 48 of 113

a. Machine shall work on user’s grip strength

b. Provide heavy gauge steel frame

c. Shall have a seat pad and weight stack guide rod

d. Rubber hand grips with collars to prevent slippage while using

e. Base frame shall have rubber feet to prevent movement

f. Manufacturer’s standard commercial warranty

Finish:

27.64 Item No. E64: Tibia Dorsi Flexion, Plate-Loaded

Overall Dimensions: 21-24”W x 15-18”D x 12-15”H

Researched product lines:

Hammer Strength – Plate Loaded Tibia Dorsi Flexion Titan Fitness – Tibia Dorsi Calf Machine ProGym Supply – Plate Loaded Tibia Dorsi Flexion

Attachment #2 Page 49 of 113

a. Machine shall work user’s tibialis anterior at the front of the lower leg

b. Provide heavy gauge steel frame

c. Shall have weight stack guide rods on each end

d. Shall have a pad for user’s leg

e. Provide textured foot platform

f. Base frame shall have rubber feet to prevent movement

g. Manufacturer’s standard commercial warranty

Finish:

27.65 Item No. E65: Core Super Stretch

Overall Footprint: 42”W x 62”D x 79”H

a. Equipment utilized to stretch the following (7) movements:

i. Hanging stretch

ii. Double leg center stretch

iii. Double leg left stretch

iv. Double leg right stretch

v. Single leg left stretch

vi. Single leg right stretch

vii. Maximum abduction stretch

b. Provide padding for seat, behind the back, under legs, inside legs

c. Vertical rail shall be able to be positioned at several angles

d. Provide handles with lever to adjust vertically on rail

e. Adjustment knob for positioning legs at several angles

f. Pull knob on back pad for adjustment in and out.

g. Pull knob to raise/lower leg pads

h. Pull knob to adjust angle of leg pads

i. Pull knob to adjust angle of vertical rail

j. Manufacturer’s standard commercial warranty

Finish:

a. Metal: Manufacturer’s standard selections

b. Vinyl: Manufacturer’s standard selections

27.66 Item No. E66: Pro XL Treadmill

Overall Dimensions: 48”W x 94”D x 70”H

MedX – Core Super Stretch

Woodway – Pro XL Treadmill

Attachment #2 Page 50 of 113

a. Commercial grade treadmill with slat belt running surface

b. Standard height handrail

c. Digital display shall show pace, speed, distance, and time

d. Manufacturer’s standard commercial warranty

e. User weight capacity 400 lb.

f. Heavy-duty welded steel frame construction

g. Multi-ply tread belts are fusion-seamed for strength, flexibility, and quiet travel over

18mm phenolic deck or high density fiberboard

h. Workout profiles shall include, at a minimum, endurance and fit tests, running, interval, cardiovascular, walking, and custom

i. LED matrix or illuminated console shall display…