Package_3_-_P-650_Aircraft_Apron_and_Taxiway_-_CID,SID,_FFE.pdf

P650-FY18 Aircraft Apron, Taxiway & Support Facilities (Buildings 4420 & 4421)

NEW JERSEY

Solicitation No: W912DS-18-B-0035Solicitation No: W9

NEW JERSEY

Joint Base McGuire-Dix-Lakehurst

United States Army Corps of Engineers New York District

ISSUE FOR CONSTRUCTION

03 December 2018

Comprehensive Interior Design (CID)

BowmanAR Text Box

Comprehensive Interior Design Issue for Construction P650 – FY18 Aircraft Apron Taxiway & 3 December 2018 Support Facilities (Building 4420 & 4421)

P650 - FY18 Aircraft Apron Taxiway & Support Facilities (Building 4420 & 4421)

McGuire Joint Base, MDL, New Jersey Issue For Construction

3 December 2018

SECTION

Proj. No. F8Z95503

Table of Contents

1 STRUCTURAL INTERIOR DESIGN (SID)

1.1 SID Design Objectives

1.2 Interior/Exterior Finish Boards

1.3 SID Cut Sheets

1.4 SID Warranty Information

1.5 SID Documents

I-110 Floor Finish Plan – AAS Building (4421)

I-111 Floor Finish Plan – Storage Building (4420)

I-601 Finish Material & Window Treatment Schedule

I-611 Room Finish Schedule

2 FURNITURE, FIXTURES & EQUIPMENT (FF&E)

2.1 FF&E Design Objectives

2.2 Furniture Illustration/Order Forms

2.3 Furniture Schedule

2.4 Alternate Manufacturer List

2.5 Furniture, Fixtures & Equipment (FF&E) Finish Boards

2.6 Points of Contact

2.7 FF&E Procurement List

2.8 FF&E Cost Estimate

2.9 FF&E Warranty Information

2.10 CID Documents

I-101 Furniture Floor Plan – AAS Building (4421)

McGuire Joint Base, MDL, New Jersey

SECTION

Table of Contents

For additional information and questions please contact the Designer of Record:

Anita Bowman Jacobs 1100 North Glebe Road Suite 500 Arlington, VA 22201 Phone: 571-218-1374 anita.bowman@jacobs.com

McGuire Joint Base, MDL, New Jersey

Structural Interior Design (SID) Design Objectives

1.1 SID DESIGN OBJECTIVES

McGuire Joint Base, MDL, New Jersey

SID DESIGN OBJECTIVES

The P650 - FY18 Aircraft Apron, Taxiway and Support Facilities project will consist of the construction of two free-standing buildings: a 2,100 gross square foot, one-story Army Aviation Support Building and a 1,500 gross square foot, primarily unconditioned storage building. The Army Aviation Support Building includes a ready room, field ops, office spaces, lobby area, restrooms and other building support rooms. The storage building will house equipment, tug and a mid-size truck vehicle. The building will reflect both user needs and functionality and will provide a comfortable yet durable facility in which to complete their operations.

The aesthetics of the P650 Army Aviation Support building will provide an image of security, strength, professionalism and pride. The exterior of the building will be brick veneer, cast stone with reinforced CMU. The materials used will need to be durable, with low maintenance and an aesthetically pleasing appearance. The design will be based on the Fort Dix design guidelines.

The image portrayed by the exterior of the P650 building will be carried through to the inside of the building. The interior finishes will be simple, yet functional and durable.

The colors will be neutral with gray tones and blue-gray accents. The flooring finishes offer durability and safety while providing complementary accents that pull the remainder of the room finishes together. The floor in the building support rooms will be sealed concrete, with slip-resistant porcelain tile in restrooms. Public areas like the corridors, field ops and the lobby will receive a durable, luxury vinyl tile, while office areas like the ready room, workroom and private office will receive modular carpet tile.

The carpet tile in the office areas will be a mixture of grey tones. The carpet tile will be durable for ease of replacement, in the event that it is stained or damaged. Walls will be painted a soothing, neutral color in the more public areas of the Army Aviation Support Building with an accent blue-gray color in the office areas.

The Storage building will be unconditioned with the exception of a small closet for fire sprinkler system connection. The exterior wall is based on prefabricated building module with no insulation. The brick wall system will extend up to 40” and the metal panel girt system will meet the brick and extend to the top of the wall. The CMU in the Storage building will receive a durable, neutral epoxy paint.

The overall look and feel of the P650 buildings will be one the occupants will be proud of for many years to come.

McGuire Joint Base, MDL, New Jersey

1.2 INTERIOR/EXTERIOR FINISH BOARDS

PT-1 Paint - Ceilings PT-2 Paint - General Office PT-3 Paint - Private Offices Sherwin Williams Sherwin Williams Sherwin Williams SW7029 Incredible White SW7015 Repose Gray SW9152 Let it Rain

PT-4 Paint - Storage Building MWP-1 Metal Wall Panels - Storage Building Sherwin Williams Centria SW9166 Drift of Mist 993 Off-White

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421) Interior Finish Selections

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421)

McGuire JB, MDL, New Jersey AAS & Storage Building Interior Finish Selections

Paint/ Wall Finishes

1100 N. Glebe Road ,Suite 500 Arlington, Virginia 22201 POC: A. Bowman P: (571) 218-1374

Project No: F8Z95503 Issue For Construction

3 December 2018

PT-1 Paint PT-2 Paint

PT-3 Paint PT-4 Paint MWP-1 Metal Wall Panel

CPT-1 Carpet Tile - Workroom/ Ready Room/ Office Shaw Contract Urban Reflections - Mirror Image 59466 63530 Moonlight

WM-1 Walk-Off Mat - Entrances Mats Inc.

Dri Track - Recessed (New York) Dark Gray

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421) Interior Finish Selections

Carpeting

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421)

McGuire JB, MDL, New Jersey AAS & Storage Building Interior Finish Selections

1100 N. Glebe Road ,Suite 500 Arlington, Virginia 22201 POC: A. Bowman P: (571) 218-1374

CPT-1 Carpet Tile

WM-1 Walk-Off Mat

Project No: F8Z95503

PFT-1 Ceramic Floor Tile - Restroom PFB-1 Ceramic Tile Base - Restroom Crossville Crossville Shades Shades AV248 Thunder AV248 Thunder

PWT-1 Ceramic Wall Tile - Restroom GR-1 Grout - Restroom Crossville Laticrete Shades 78 Sterling Silver AV244 Mist

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421) Interior Finish Selections

Tile

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421)

McGuire JB, MDL, New Jersey AAS & Storage Building Interior Finish Selections

1100 N. Glebe Road ,Suite 500 Arlington, Virginia 22201 POC: A. Bowman P: (571) 218-1374

PFT-1 Ceramic Floor Tile PFB-1 Ceramic Tile Base

PWT-1 Ceramic Wall Tile

GR-1 Grout

Project No: F8Z95503

LVT-1 Luxury Vinyl Tile - PLAM-1 Plastic Laminate SS-1 Solid Surface General Use Lobby Millwork Lobby Break Area Countertop, Shaw Formica Lobby Reception Desk Strand 961-58 Fog & Countertop 16530 Pebble Corian

Arrowroot RB-1 Resilient Base - PLAM-2 Plastic Laminate General Use Reception Desk Millwork Roppe Interior Cabinet Areas Pinnacle Rubber Base Formica Lunar Dust 114 934-58 Pearl

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421) Interior Finish Selections

Miscellaneous

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421)

McGuire JB, MDL, New Jersey AAS & Storage Building Interior Finish Selections

1100 N. Glebe Road ,Suite 500 Arlington, Virginia 22201 POC: A. Bowman P: (571) 218-1374

SS-1 Solid Surface

LVT-1 Luxury Vinyl Tile

RB-1 Resilient Base PLAM-2 Plastic Laminate

Project No: F8Z95503 Issue For Construction

PLAM-1 Plastic Laminate

ACT-1 Acoustical Ceiling Tile - General Use CG-1 Corner Guard Armstrong C/S Acrovyn Ultima - Beveled Tegular 15/16" 4000 SM-20N White 262 Driftwood - Suede Texture

WP-1 Wall Protection WB-1 Window Blinds C/S Acrovyn Hunter Douglas SCR-40N Crash Rail Vertical - Aluminum 930 Blue Silk - Suede Texture Aluminum Off White

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421) Interior Finish Selections

Miscellaneous

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421)

McGuire JB, MDL, New Jersey AAS & Storage Building Interior Finish Selections

1100 N. Glebe Road ,Suite 500 Arlington, Virginia 22201 POC: A. Bowman P: (571) 218-1374

ACT-1 Acoustical Ceiling Tile

Project No: F8Z95503 Issue For Construction

3 December 2018

WP-1 Wall Protection

WB-1 Window Blinds

CG-1 Corner Guard

BR-1 Façade Bowerston Shale Company Chocolate Wirecut Modular

CS-1 Façade Continental Cast Stone 1104 Buff Banding

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421) Interior Finish Selections

Exterior Finishes

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421)

McGuire JB, MDL, New Jersey AAS & Storage Building

Exterior Finish Selections

1100 N. Glebe Road ,Suite 500 Arlington, Virginia 22201 POC: A. Bowman P: (571) 218-1374

BR-1 Facade

Project No: F8Z95503 Issue For Construction

CS-1 Facade

SF-1 Storefront Wing Wall/Glazing SF-2 Entrance Doors/Glazing Kawneer Corp. Kawneer Corp.

Aluminum, Tri-Fab #451T - Flouropan & 70% PVDT IR 501UT - Flouropan & 70% PVDT Resin-Kynar 500/Hylar 5000 or Anodized Resin-Kynar 500/Hylar 5000 or Anodized Metal: Dark Bronze Metal: Dark Bronze Glazing: Solarban 60: Bronze Glazing: Solarban 60: Bronze

SSM-1 Metal Wall & Roof System WD-1 Windows Fabral Wausau Thin Seam - Standing Seam Metal Metal - 2250i Series - Dark Bronze Kynar 500/Hylar 5000 - Dark Bronze Flouropan & 70% PVDT

Resin-Kynar 500/Hylar 5000 or Anodized

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421) Interior Finish Selections

Exterior Finishes

P650 - FY18 Aircraft Apron, Taxiway & Support Facilities (Building 4420 & 4421)

McGuire JB, MDL, New Jersey AAS & Storage Building

Exterior Finish Selections

1100 N. Glebe Road ,Suite 500 Arlington, Virginia 22201 POC: A. Bowman P: (571) 218-1374

SF-1 Storefront Wing Wall/Glazing & SF-2 Entrance Doors/Glazing

SSM-1 Metal Wall & Roof System & WD-1 Windows

Project No: F8Z95503

McGuire Joint Base, MDL, New Jersey

1.3 SID CUT SHEETS

mcelroha

ACT-1

BR-1

performance + testing antimicrobial assessment: passes (AATCC-174) (When installed using Shaw 5036 adhesive) pill test: pass radiant panel: class I nbs smoke: less than 450 electrostatic propensity: less than 3.5 kv

CRI greenlabel plus: USA (GLP9968)

ADA compliance: This product meets the guidelines as set forth in the Americans with Disabilities Act for minimum static coefficient of friction of 0.6 for accessible routes.

mirror image tile product type: carpet tile collection: urban reflections style number: 59466 construction: multi-level pattern loop fiber: eco solution q® nylon dye method: 100% solution dyed primary backing: synthetic secondary backing: ecoworx® tile protective treatments: ssp® shaw soil protection warranty: lifetime commercial limited u.s. metric product size: 24 x 24 in 61 x 61 cm gauge: 1/12 inch 47.2 per 10cm stitches: 10 per inch 38 per 10cm finished pile thickness: 0.121 inches 3.07 mm average density: 5653 per cu.yd. 0.21 g/cm3 kilotex: 10.27 kilotex total thickness: 0.248 inches 6.30 mm tuffted weight: 19 oz/yd2 644.2 gms/sqm pattern repeat: none none gsa approved product yes recommended installation method ashlar brick monolithic quarter turn random coordinating products carpet tile: prisma tile

June 11, 2018 1 of 2

Corporate Headquarters +1 800 257 7429 | +1 706 532 7984 | Atlanta +1 404 853 7429 | Bangalore +9180 6759 0334 x 0335 | Beijing +86 10 6568 5881 | Chicago +1 312 467 1331 | Dubai +971 4 313 2496 | Hong Kong +852 2623 0371 | Latin America (Miami) +1 305 827 5912 | London +44 207 961 4120 | Los Angeles +1 800 233 1614 | Melbourne +1 800 556 302 | Mexico City +55 5010 7600 | Nantong +86 400 800 7429 | New York +1 212 953 7429 | San Francisco +1 415 955 1920 | Santiago +562 2431 5000 x 550 | Shanghai +86 21 5258 9799 | Singapore +65 6733 1811 | Sydney +1 800 556 302

© 2018 Shaw Industries Group, Inc., a Berkshire Hathaway Company

Page 1 of 2mirror image tile - Shaw Contract | Shaw Hospitality

6/11/2018https://www.shawcontract.com/en-us/productspec/ShowFullSpec/59466/63546 mcelroha

CPT-1

mirror image tile product transparency

Shaw Contract is dedicated to providing clients with a building chemistry that's safe and dependable. Working together, we will help you meet your goals as they pertain to material health. EcoWorx products with Eco Solution Q nylon are Cradle to Cradle Certified (tm) Silver and assessed for impacts on human health and the environment. This product can be recycled. When it's time to replace, we can collect and recycle it through our Environmental Guarantee.* attributes + certifications

Cradle to Cradle Certified™ silver level (version 3.1)

Health Product Declaration (HPD): 1,000 ppm disclosure

Environmental Product Declaration (EPD): 3rd party certified in accordance with ISO14044, ISO14025 & EN15804

Living Building Challenge (LBC): free of red list chemicals

Declare: LBC compliant nsf 140: gold

CRI Green Label Plus (GLP): USA (GLP9968)

Building Research Establishment (BRE): certified

Good Environmental Choice Australia (GECA): certified

Singapore Green Label: 039-003 ce marking (EN 14041): 3rd party certified environmental guarantee*: free pickup & delivery available north america total recycled content: 45% (post industrial 45% | post consumer 0%) product packaging: 100% recyclable country of origin**: USA green leed contribution credit

MR Credit: Building Product Disclosure and Optimization Environmental Product Declarations - Option 1. Environmental Product Declaration (EPD)

3rd party certified in accordance with ISO14044, ISO14025 & EN15804

MR Credit: Building Product Disclosure and Optimization Material Ingredients - Option 1: Material Ingredient Reporting

C2C silver level (version 3.1)

MR Credit: Building Product Disclosure and Optimization Material Ingredients - Option 2. Material Ingredient Optimization

C2C silver level (version 3.1)

MR Credit: Building Product Disclosure and Optimization Sourcing of Raw Materials - Option 1.

Raw Material Source and Extraction Reporting annual GRI sustainability report

MR Credit: Building Product Disclosure and Optimization Sourcing of Raw Materials - Option 2:

Leadership Extraction Practices environmental guarantee: free pickup & delivery available north america

EQ Credit: Low Emitting Materials Option 1. Product Category Calculations green label plus certification: GLP9968

MR Credit: Interiors Life-Cycle Impact Reduction Option 3. Design for Flexibility ecoworx tile w/ lokdots installation system additional information

* To learn more about the recyclability of our products and our Environmental Guarantee, please visit shawcontract.com.

**Meets or exceeds all local and national regulations in country of manufacture.

June 11, 2018 2 of 2

Specifications are subject to nominal manufacturing variances. Material supply and/or manufacturing processes may necessitate specification changes without notice. This carpet is an exclusive design and may not be duplicated in any manner. Use of this design in the creation of another carpet design is also strictly prohibited. Visit shawcontract.com/testing for more information.

Corporate Headquarters +1 800 257 7429 | +1 706 532 7984 | Atlanta +1 404 853 7429 | Bangalore +9180 6759 0334 x 0335 | Beijing +86 10 6568 5881 | Chicago +1 312 467 1331 | Dubai +971 4 313 2496 | Hong Kong +852 2623 0371 | Latin America (Miami) +1 305 827 5912 | London +44 207 961 4120 | Los Angeles +1 800 233 1614 | Melbourne +1 800 556 302 | Mexico City +55 5010 7600 | Nantong +86 400 800 7429 | New York +1 212 953 7429 | San Francisco +1 415 955 1920 | Santiago +562 2431 5000 x 550 | Shanghai +86 21 5258 9799 | Singapore +65 6733 1811 | Sydney +1 800 556 302

© 2018 Shaw Industries Group, Inc., a Berkshire Hathaway Company

Page 2 of 2mirror image tile - Shaw Contract | Shaw Hospitality

6/11/2018https://www.shawcontract.com/en-us/productspec/ShowFullSpec/59466/63546

6/18/2018http://www.continentalcaststone.com/colors/pics/1104buff.GIF

BowmanAR Text Box 1104 Buff

BowmanAR

CS-1

Sill:

Banding:

GR-1

Product Specifications

Strand

0516V

Class III Printed Film Vinyl Plank

20 mil or 0.020" (0.5 mm)

2.5 mm or nominal 0.098"

18" wide x 36" long

Width: 457.2 mm, Length: 914.4 mm

ExoGuard™ Quartz-Enhanced Urethane

Commercial Grade

Glue Down

Style Name

Style Number

Construction

Class / ASTM F1700

Wearlayer Thickness

Overall Thickness

Nominal Dimensions

Actual Size / ASTM F536

Finish

Backing Class

Installation

Recommended Adhesive 4100, S150, 200, Kwikflash

Testing

ADA Compliant

1500 psi passes < 8%

Passes

Passes

Passes

Passes

Passes, >0.45 watts/cm2, NFPA Class I

Slip Resistance / ASTM D2047

Static Load Limit / ASTM F970

Residual Indentation / F1914

Flexibility / ASTM F137

Resistance to Heat / ASTM F1514

Resistance to Light / ASTM F1515

Resistance to Chemicals / ASTM F925

Radiant Flux / ASTM E648

Smoke Density / ASTM E662 Passes, <450

Packaging

Square Feet per Carton 45 sf

Pieces per Carton 10 pcs

Weight per Carton 37.65 lbs

Environmental

Indoor Air Quality FloorScore® certified

Strand

Warranty

10 year limited commercial wear warranty. 10 year under bed warranty when installed with Shaw 4100 or Shaw S150 spray adhesive.

Please visit www.shawhardsurface.com for the most current warranty information.

shawhardsurface.com

Specifications are subject to nominal manufacturing variance.

Material supply and/or manufacturing processes may necessitate changes without notice.

High Performance Luxury Vinyl Plank mcelroha

LVT-1

Crossville, Inc. • P.O. Box 1168, Crossville, TN 38557 • Phone: 931.484.2110 • Fax: 931.456.2956 • E-Mail: Crossc@CrossvilleInc.com • CrossvilleInc.com

AV241 Frost UPS

AV247 Haze UPS

SBC1/.10103HMOS

Warm Grays

(AV243, AV245, AV247)

SBC2/.10212MT Shine

SBC1/.10212MT Luster

AV242 Vapor UPS

AV248 Thunder UPS

SBC2/.10103HMOS

Cool Grays

(AV244, AV246, AV248)

AV243 Fog UPS

AV249 Ink UPS

SBC3/.10103HMOS

Whites

(AV241, AV242)

AV244 Mist UPS AV245 Clay UPS AV246 Ash UPS

• Honed mosaics and metallic borders add design versatility and aesthetic appeal

• Cross-Sheen® finish for easy cleaning (available on UPS only)

• Comprised of nine contemporary colors

• Field tile is rectified and designed to be modular with a minimum 3mm grout joint

• Features subtle linear pattern. This pattern can run in the same direction or alternate to provide greater visual texture

• Contains a minimum of 4% pre-consumer recycled content and is manufactured by Crossville® using processes that is Green SquaredSM certified

Features and Benefits

Mosaic blends available** 1 x 3 Mosaic Border***

Color Palette

AV241 Frost HON AV242 Vapor HON AV243 Fog HON AV244 Mist HON AV245 Clay HON AV246 Ash HON

AV247 Haze HON AV248 Thunder HON AV249 Ink HON

** Honed finish only.

*** Globally sourced.

Shades by Crossville® mcelroha

PFB-1, PFT-1, PWT-1

Crossville, Inc. • P.O. Box 1168, Crossville, TN 38557 • Phone: 931.484.2110 • Fax: 931.456.2956 • E-Mail: Crossc@CrossvilleInc.com • CrossvilleInc.com

Mosaic & Mosaic Border Available in all colors

Nominal (in) Actual (mm) Thickness (mm) Finish

1 x 3 Mosaics* 297 x 297 10.5 HON

1 x 3 Mosaics Border** 47 x 334.5 10.5 Metallic

* 1 x 3 honed mosaics mesh mounted in 11-7/8 x 11-7/8 sheets.

** Mounted on a 2 x 13 sheet. Globally sourced.

Sizes & Finishes Field Tile Available in all colors

Nominal (in) Actual (mm) Thickness (mm) Finish

6 x 24 147 x 597 10.5 UPS/HON

12 x 24 297 x 597 10.5 UPS/HON

24 x 24 597 x 597 10.5 UPS/HON

Note: All field tile is rectified and modular with a minimum 3mm grout joint.

Actual measurements stated in inches indicate tile is calibrated (non-rectified).

Actual measurements stated in mm indicate tile is rectified.

Product Performance

Breaking Strength >500 lbf ASTM C648

Bond Strength >200 psi ASTM C482

Chemical Resistance Unaffected ASTM C650

Frost Resistance Resistant ASTM C1026

Water Absorption <0.20% ASTM C373

Scratch Hardness 7 Mohs Scale

Wet Dynamic COF

UPS 0.50 – 0.60 DCOF AcuTest™

HON 0.42 – 0.52 DCOF AcuTest™

6 x 24

24 x 24

12 x 24

Sizes (Shown in AV248 Thunder UPS)

Shade & Texture Index

Shades by Crossville™ has a shade variation of V2.

4 x 24 Bullnose 6 x 12 Cove Base (universal, flat top) Honed (Honed finish) is semi-polished

Coordinating Trim Available in all colors

Nominal (in) Actual (mm) Thickness (mm) Finish

4 x 24 Single Bullnose

96 x 597 10.5 UPS/HON

6 x 12 Cove Base

150 x 297 10 UPS

Shades by Crossville®

V2 V3 V4V1 V1 Uniform appearance V2 Slight Variation V3 Moderate Variation V4 Substantial Variation

This porcelain tile product is produced with a V2 variation. Differences among pieces from the same production run are minimal. Inspect the product upon delivery and for best results, blend tile from several cartons during installation.

Our Porcelain Stone® products are available in popular plank shapes with no minimum order and quick fulfillment. Depending on the product, there are up to 4 widths and 7 lengths, creating more than 2,796 combinations.

Get Planked!

F S -S

H A D E S -8

-17

Environmentally AwareTrade Organizations

Shades by Crossville® contains a minimum of 4 percent pre-consumer recycled content and is manufactured by Crossville® using processes that recycle nearly 12 million pounds of previously discarded filtrate and fired tile waste. In addition to its own fired waste recycling, Crossville also accepts and recycles reclaimed, previously installed tile through its Tile Take-Back™ Program. For more information, visit CrossvilleInc.com/ green.

Crossville® has earned Green SquaredSM certification from the Tile Council of North America (TCNA) for its entire U.S.-manufactured porcelain product line-up, as well as its manufacturing processes.

The company is among the first ever recipients of this certification standard for the tile industry. TCNA developed the Green Squared certification under American National Standards Institute (ANSI) process.

The multi-attribute program (ANSI A138.1) scores products in five categories of performance: product characteristics, manufacturing, corporate governance, innovation and end-of-life. Crossville’s certified products and processes received stringent evaluation from Scientific Certification Systems (SCS), the green building industry’s longest standing third-party certifier.

Our porcelain tiles are available with Hydrotect™. Crossville’s revolutionary invisible coating harnesses the power of light, water, and oxygen to create the best defense against dirt and pollution. Whether indoors or out, floors and walls stay cleaner, providing a superior experience in any space. For complete details check our website at CrossvilleInc.com.

EcoCycle Tile Process™

Green SquaredSM Certified

Hydrotect

Recommended Use

Shades by Crossville® is recommended for interior floors, walls, countertops, and exterior walls in both residential and commercial applications. Shades by Crossville™ is not recommended for exterior horizontal surfaces or exterior paving. The honed field tile is not recommended for wet areas where standing water may occur. If offset pattern is required for tiles 18 inches or longer, Crossville® recommends an offset of not greater than 33%. If an offset greater than 33% is specified, specifier and owner must approve mock-up and lippage.See CrossvilleInc.

com for detailed installation instructions.

Shades by Crossville® Crossville, Inc. PO Box 1168 Crossville, TN 38557

Phone 931.484.2110 Fax 931.456.2956 E-Mail Crossc@CrossvilleInc.com Web CrossvilleInc.com

For over 20 years we have been offering Porcelain tile to commercial customers at National Accounts pricing programs with special discounts. The National Accounts department provides materials forecasting, sales support and samples.

Exterior Cladding

Crossville’s Porcelain Stone® Exterior Cladding Systems are suitable for virtually any conventional masonry application. When used in conjunction with our exterior cladding systems, Crossville’s Porcelain Stone offers clear advantages: decreased construction costs, less site disturbance, low-to-zero maintenance after installation, accelerated construction schedules and greater strength than traditional masonry.

Crossville Inc. guarantees that its products will meet or exceed the performance specifications outlined in ANSI A137.1-2012 and in the performance data section of the Crossville, Inc. general product catalog. For complete details check our website at CrossvilleInc.com.

Our Warranty

National Accounts

Sample fulfillment & Help Line Samples@CrossvilleInc.com 1 800 221.9093

Loose Samples for Architects & Designers

Loose Tile Samples Sizes may vary depending on product series Max. of 4 large field tile per order

Replacement Chips for PSS Rack Max. of 5, 2 x 2 chips per color

Standard Shipping UPS Ground

Information listed here is subject to change.

Please refer to CrossvilleInc.com for the latest, most accurate information.

Crossville® Sample Express

Crossville® produces the Shades by Crossville® mosaics with the honed (HON) finish and the AcuTestsm Wet Dynamic COF ≥ .42. Their small sizes ensure frequent grout joints which provides traction and drainage.

Crossville cannot control situations involving incorrect installation, improper slope to the drain for elimination of standing water and poor surface cleaning.

This information is provided so that customers may make a realistic and informed decision when comparing Shades by Crossville to other tile products in wet area environments, such as residential/commercial bathrooms, showers, and interior pool decks.

Regular cleaning is the best way to keep Shades by Crossville® tile looking good for years to come. Use clean, hot water (combined with a household cleaner for more aggressive cleaning). Rinse thoroughly and dry with a soft cloth. No waxes are needed. More information regarding the care and maintenance of Crossville® products is available at CrossvilleInc.com.

Care and Maintenance

Wet Tile Use

FTB-0824 Rev 5 (11/17)

PRODUCT DESCRIPTION

Melamine-impregnated decorative surface papers are combined with phenolic-treated kraft paper and consolidated in a press at high pressures. The sheet back is sanded to maintain a uniform thickness and facilitate bonding.

COLORS AND FINISH

Formica® Brand Laminate sheets (horizontal general purpose grade 10/HGS) are available in a broad selection of designs and colors. Standard finishes for each pattern are detailed in the Formica Corporation - National Product Guide (Form No. 02-034W).

Not all finishes are available in all Solid Colors / Patterns / Wood-grains. All Grade 10 material is Make-to-Order, with the exception of Formica Architectural Doors

Formica Brand Laminate sheets (horizontal post-forming grade 12/HGP and vertical post-forming grade 20/VGP) are available in a broad selection of designs and colors. Standard finishes for each pattern are detailed in the Formica Corporation - National Product Guide (Form No. 02-034W). Not all finishes are available in all Solid Colors / Patterns / Woodgrains.

RECOMMENDED APPLICATION

Grade 10/HGS

Formica Brand Laminate – general purpose grade 10/HGS is intended for application to interior horizontal or vertical surfaces where design, appearance, quality, durability, resistance to stain, and resistance to heat from ordinary sources are important considerations.

Grade 12 /HGP

Formica Brand Laminate – post-forming laminate grade 12/HGP is intended for application to interior horizontal or vertical surfaces requiring 1/2" (12.7mm) or greater outside radiused edges, and/or 3/16" (4.8mm) cove radii, where design, appearance, quality, durability, resistance to stain, and resistance to heat from ordinary sources are important considerations.

Grade 20/ VGP

Formica Brand Laminate – post-forming grade 20/VGP is intended for application to interior vertical surfaces requiring 3/8" (9.5mm) or greater outside radiused edges, where design, appearance, quality, durability, resistance to stain, and resistance to heat from ordinary sources are important considerations.

FABRICATION AND ASSEMBLY

LIMITATIONS

Formica Brand Laminate is designed for interior use only. Do not adhere directly to plaster, drywall (gypsum board), or concrete. Do not use in areas exposed to temperatures exceeding 275°F (135°C) or for exterior applications. When using Grade 20, finished panel widths should not exceed 24" (610mm) maximum, unless the adhesive system is a rigid set adhesive like PVA (wood glue).

We do not recommend contact adhesive for Grade 20 panels wider than 24" (610mm). When using Grade 20-90 gloss finish on a panel application, there will be a degree of telegraphing on the surface. Formica recommends using Grade 10-90 or 12-90 gloss for these applications.

MACHINING LOW SHEEN L AMINATE SHEETS

Formica Brand Laminate with low sheen surfaces are subject to marring. Fabricating with peel coat on surface (if applicable) is recommended. Router base should be clean and free of burrs and debris. Table saws should be clean, flat, and free of burrs.

STORAGE

Formica Brand Laminate should be stored horizontally, with a caul board or other protective sheet placed on top to protect the material from possible damage. The material should be protected from moisture, and should never be stored in contact with the floor or an outside wall. Optimum conditions for storage are approximately 75°F (24°C), and 45% to 55% relative humidity.

PRECONDITIONING

Prior to fabrication, allow laminate sheet and substrate to acclimate for at least 48 hours at the same ambient conditions.

Optimum conditions are approximately 75°F (24°C), and relative humidity of 45% to 55%. Provisions should be made for the circulation of air around the materials.

SUBSTRATES

Formica Brand Laminate sheet should be bonded to an appropriate substrate such as Medium Density Fiberboard (MDF), or #45 density particleboard (ANSI A208.1 - 1999). A marginal substrate such as plywood may be used; however it must meet APA standards and be “A” faced, hardwood veneer or multi-ply core plywood. If you choose to use plywood Formica recommends F200, F270 or PVAc adhesives to bond HPL. Refer to the Substrate Tech Guide. Substrates should be sanded smooth, and should be clean, free of oil or grease, and uniform in thickness.

Formica Brand Laminate sheet (grade 10/HGS) can be bonded to metal substrates using contact adhesive (see recommendations below, under Adhesives). Refer to Formica® Laminate Brief - Veneered to Metal Substrates for General Information, Materials, Conditions and Methods. Formica Corporation does not warranty this particular application.

FORMICA® LAMINATE BY FORMICA GROUP

TECHNICAL DATA (GENERAL PURPOSE GRADE 10 AND POST-FORMING GRADES 12 & 20)

mcelroha

PLAM-1, PLAM-2

ADHESIVES

Contact, semi-rigid (PVAc), or rigid (urea, resorcinol) adhesives may be used. Follow the adhesive manufacturer’s recommenda-tions. Certain combinations of finish, substrate, and adhesive can cause telegraphing.

When bonding Formica Brand Laminate sheet (grade 10/ HGS) to metal substrates using contact adhesive, use Formica brand flammable solvent-based #155 or non-flammable solvent-based #120M contact adhesives. Do not use water-based or SBR types of contact adhesive when bonding laminate sheets to metal substrates.

ASSEMB LY

Material, equipment, and workmanship should conform to the Formica Corporation recommended standard practices, condi-tions, procedures, and recommendations as specified by ANSI/ NEMA LD3-2005, Architectural Woodwork Quality Standards and ANSI 161.2-1998 Standards.

Formica Brand Laminate sheets (grade 10, 12, and 20) can be sawed, drilled, routed, and fabricated using standard carbide tipped cutting tools.

Holes for screws or bolts should be drilled oversized.

Panel assemblies should be laminated with the appropriate backing sheet to minimize warpage. Formica backing sheets (grade 91/BKV or 92/BKH) are recommended for less critical applications. Optimum balancing is obtained by bonding the same surface laminate on both sides of the assembly with the same adhesive. Always align sanding marks in the same direction.

All inside corners of cutouts must be radiused as large as possible, 1/8" (3.18mm) minimum, to avoid stress cracking. The edges and corners should be routed, sanded, or filed smooth and free of chips or nicks. Panels fabricated using metal substrates, which are more dimensionally stable than wood-based materials, should be installed in a framing system, which captures the perimeter of the panel yet allows for the normal dimensional movement of the laminate. This is to protect the panel edge and prevent edge lifting or separation from the substrate, which can occur under dry conditions.

TECHNICAL DATA

Performance compliance of Formica Brand Laminate General purpose grade 10 and Post-forming grades 12 and 20

FORMICA® LAMINATE BY FORMICA GROUP

TECHNICAL DATA (GENERAL PURPOSE GRADE 10 AND POST-FORMING GRADES 12 & 20) CONTINUED

Appearance 3.1 No ABC Defects

3.3 Slight

Cleanability 3.4 Stain Resistance

Reagents 1 - 10 Reagents 11 - 15

3.4

No Effect

Boiling Water Resistance 3.5 No Effect High Temperature Resistance 3.6 Slight Ball Impact Resistance - in

3.8 50 (min.)

Radiant Heat Resistance - sec 3.10 Dimensional Change

Machine Direction - % Cross Direction - %

3.11

0.50 (max.)

0.90 (max.)

Wear Resistance - cycles 3.13 400 (min.)

Appearance 3.1 No ABC Defects

No ABC Defects

3.3 Slight Slight

Cleanability 3.4

Stain Resistance Reagents 1 - 10 Reagents 11 - 15

3.4

Boiling Water Resistance 3.5 Slight Slight

High Temperature Resistance 3.6 Slight Slight

Ball Impact Resistance - in

3.8 30 (min.)

762 (min.)

20 (min.)

508 (min.)

Radiant Heat Resistance - sec 3.10 100 (min.) 80 (min.)

Dimensional Change Machine Direction - % Cross Direction - %

3.11

Wear Resistance - cycles 3.13 400 (min.) 400 (min.)

Formability - in

3.14

Blister Resistance - sec 3.15 55 40

FIRE TEST DATA – ASTM E- 84

Formica Corporation conducts and maintains an active fire test- ing program to provide code regulators, architects, and designers with current information on a variety of panel assemblies. Fire test data using Formica® Brand Laminate sheets (grades 10/HGS, 12HGP, and 20/VGP) is available upon request. Contact Formica®

Technical Services at 1-800-FORMICA™ (option 2) or 513-786- 3578 for assistance.

CODES AND SPECIFICATIONS

FORMICA BRAND L AMINATE

( GENERAL PURPOSE — GRADE 10/HGS / HORIZONTAL APPLICATION)

FMVSS 302

NSF Standard 35 ASTM-G22 Approved

Greenguard Certification

( POST-FORMING — GRADE 12 /HGP / HORIZONTAL APPLICATION)

U.S. Federal Specification, LP-508-H, Style D, Type II, Class 1

FMVSS 302

NSF Standard 35

( POST-FORMING — GRADE 20/ VGP / VERTICAL APPLICATION)

U.S. Federal Specification, LP-508-H, Style D, Type II, Class 2 CFR Part 3280 Manufacturing Home Construction and

Safety Standards

FMVSS 302

NSF Standard 35

SIZES

Sheet widths: 30” (762mm), 36" (914mm), 48" (1219mm), 60" (1524mm) Sheet lengths: 96" (2438mm, 120" (3048mm), 144" (3658mm) *Check National Product Guide for specific size options for a décor.

THICKNESS

WEIGHT PER SQUARE FOOT

Grade 10/HGS: 0.324 pounds Grade 12/HGP: 0.252 pounds Grade 20/VGP: 0.180 pounds

TO ORDER FORMICA BRAND LAMINATE SAMPLES,

PLEASE CALL

U.S.: 1-800-FORMICA™ (select option 1) Canada: 1-800-363-1405 for ZIP-CHIP service

HOW TO SPECIFY

Surface (and appropriate backing sheet) shall be Formica Brand Laminate by Formica Group, Cincinnati, Ohio.

COLOR NUMBER

COLOR NAME

GRADE

FINISH

SIZE

USE AND CARE

Refer to Formica Brand Laminate Use and Care Guide

Formica Brand Laminate sheet may be cleaned with a damp cloth and mild detergent.

If in doubt about the suitability of a particular cleaner or detergent, check with its manufacturer. Use of abrasive cleaners, powders, scouring pads, steel wool, sandpaper, etc., can damage the finish of the decorative surface and are not recommended.

Acid or alkaline-based cleaners, compounds, etc., will mar, etch, corrode, and permanently discolor the decorative surface of laminate. Never use these materials on laminate, nor allow bottles, rags, etc., contaminated with them to contact the surface.

Accidental spills or splatters from these harsh materials should be wiped off immediately, and the area cleaned thoroughly with a damp cloth.

TYPICAL NEMA

THICKNESS THICKNESS RANGE

Grade 10 ( HGS) .044" (1.1mm) .043" - .053" (1.08mm - 1.32mm)

Grade 12 ( HGP) .035" (0.9mm) .034" - .044" (0.88mm - 1.12mm)

Grade 20 ( VGP) .027" (0.7mm) .024" - .032" (0.6mm - 0.8mm)

LIMITED WARRANTY

Formica Corporation expressly warrants that, for a period of one

(1) year from the date of first sale, these products will be reason-ably free of defects in materials and workmanship, and that when properly handled and fabricated, will conform, within accepted tolerance, to applicable manufacturing specifications. Colors subject to dye lot variations. This limited warranty only applies to Formica Brand Laminate which is stored, handled, fabricated and installed in the manner recommended by Formica Corpora-tion. Due to the variety of uses and applications to which Formica Brand Laminate may be put, FORMICA CORPORATION CAN MAKE NO

WARRANTY THAT THIS PRODUCT IS SUITABLE FOR ANY PARTICULAR

PURPOSE AND CAN MAKE NO OTHER WARRANTIES, EXPRESS

OR IMPLIED, OTHER THAN THOSE SET FORTH ABOVE.

DISCLAIMER OF WARRANTIES

THE WARRANTIES SET FORTH HEREIN OR IN FORMICA CORPORA-

TION’S WARRANTY DOCUMENTS WITH RESPECT TO A PRODUCT ARE

THE ONLY WARRANTIES MADE BY FORMICA CORPORATION IN

CONNECTION WITH THESE PRODUCTS, AND ARE EXPRESSLY IN LIEU

OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY

FORMICA CORPORATION ARE SOLD ONLY TO THE SPECIFICATIONS

SPECIFICALLY SET FORTH BY FORMICA CORPORATION IN WRITING.

FORMICA CORPORATION’S SOLE OBLIGATION FOR A REMEDY TO

BUYER SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING

PRODUCTS, OR AT THE OPTION OF FORMICA CORPORATION, RETURN

OF THE PRODUCT AND REFUND OF THE PURCHASE PRICE. BUYER

ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF

THE PRODUCTS PURCHASED, WHETHER USED SINGLY OR IN

COMBINATION WITH OTHER SUBSTANCES.

LIMITATION OF LIABILITY

No claim by buyer of any kind, including claims for indemnification, whether as to quality or amount of products delivered or for non-delivery of products, shall be greater in amount than the purchase price of the products in respect of which damages are claimed. IN NO EVENT SHALL FORMICA

CORPORATION BE LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT,

INCIDENTAL, RELIANCE, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES OR COVER, OR LOSS OF PROFIT, REVENUE OR USE, IN

CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE

SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE

PRODUCTS SOLD HEREUNDER, OR FOR ANY

LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

BUYER SHALL INSPECT FOR NONCONFORMITY PROMPTLY UPON

RECEIPT. Failure by buyer to give Formica Corporation written notice of claim within 30 days from date of delivery or, in the case of non-delivery from the date fixed for delivery, shall constitute a waiver by buyer of all claims in respect of such products.

This limited warranty gives purchaser of Formica Brand Laminate specific legal rights. Other rights may be available and vary from state to state.

Any information or suggestion concerning application, specifica-tions or compliances with codes and standards is provided solely for your convenient reference and without any representation as to accuracy or suitability. Formica Corporation disclaims any legal responsibility. The user must verify and test the suitability of any information or products for their own particular purpose of specific application.

MANUFACTURER

Formica Brand Laminate sheets are manufactured by Formica Corporation.

Formica Corporation 10155 Reading Road Cincinnati, Ohio 45241-5279

TECHNICAL SERVICES

Technical assistance may be obtained through your local Formica®

Brand Products Distributor or from Formica Corporation trained representatives in sales offices throughout the country. To assist these representatives, Formica Corporation maintains a sales and technical services staff in Cincinnati, Ohio. For technical assistance, contact your distributor or sales representative; write the company directly at Formica Corporation Technical Services Department, 10155 Reading Road, Cincinnati, OH, 45241; call (513) 786-3578 or 1-800-FORMICA™; or fax (513) 786-3195. In Canada, call 1-800-363-1405. In Mexico, call (525) 530-3135.

Formica is a sublicensed trademark to Formica Corporation. Formica and the Formica Anvil logo are registered trademarks of The Diller Corporation. 1-800 -FORMICA is a trademark of The Diller Corporation. The products and manufacturing processes of Formica Corporation are protected under U.S. and foreign patents.

All ® brands are registered trademarks of the respective owners. All ™ brands are trademarks of the respective owners.

For warranty information, please visit www.formica.com or call 1-800 -FORMICA™.

Green Guard Environmental Institute Formica® high-pressure laminate ( HPL) is Green Guard Indoor Air Quality Certified under the Green Guard Standard for Low-Emitting Products.

©2010 Formica Corporation Cincinnati, Ohio 45241

INTERIOR LATEX

PROMAR 200

ZERO VOC

OUR PROFESSIONAL, TOP QUALITY, COMPLETE,

ZERO VOC SOLUTION.

mcelroha

PT-1,2,3,4

EXCELLENT QUALITY. ZERO VOCS.

SIX SHEENS. ALL COLORS.

IT DOESN’T GET MORE COMPLETE THAN THIS.

PROMAR 200 ZERO VOC IS BROUGHT TO YOU BY

A NAME YOU KNOW AND TRUST.

Professional painters have it all with ProMar® 200 Zero VOC Interior Latex.

A complete professional line that not only has zero VOCs, but is also available in six sheens and every color. All while

For 150 years, Sherwin-Williams has provided contractors, builders, property managers, architects and designers with the trusted products they need to build their business and satisfy customers. ProMar 200 Zero VOC Interior Latex is just one more way we bring you industry-leading paint technology — innovation you can pass on to your customers.

Plus, with more than 4,100 stores and 2,400 sales representatives across North America, personal service and expert advice is always available near jobsites. Find out more about ProMar 200 Zero VOC at your nearest Sherwin-Williams store or to have a sales representative contact you, call 800-524-5979.

Sherwin-Williams.com ©2017 The Sherwin-Williams Company #2006016PD 1/17 delivering productivity with outstanding durability and touchup. And now, the flat sheen has improved hide and uniformity, and meets MPI certification.

PROMAR 200 ZERO VOC KEY BENEFITS

• Exceptional durability, easy application and excellent hide. • Outstanding touchup reduces repaint costs.

• Anti-microbial agents inhibit the growth of mold and mildew on the paint surface.

• Zero VOCs meets the most stringent VOC requirements.

Complies with LEED v4, GREENGUARD Environmental Institute (GEI) and other green guidelines and regulations.

ProMar 200 Zero VOC Flat meets MPI 53 and 143.

• Available in flat, low sheen eg-shel, low gloss eg-shel, eg-shel, semi-gloss and gloss.

• Available in all colors — including deep, vivid accents.

PRODUCT CERTIFIED FOR

LOW CHEMICAL EMISSIONS

UL.COM/GG

UL 2818

Successful Painting Jobs Start Here.

An Advanced Technology, Versatile Sealer and Stain Blocker for a Variety of Surfaces

Multi-Purpose

Assures Adhesion On Slick Surfaces

Latex Primer

Ideal for both interior and exterior applications, Sherwin-Williams Multi-Purpose Primer has excellent adhesion and bonding properties even on many “hard to paint” surfaces. For use on a wide array of substrates, it is a universal favorite. It can be tinted and is compatible with a full range of topcoats.

• Assures adhesion and bonding of the topcoat — even on slick, glossy surfaces

• Assures uniform appearance of topcoats

• Excellent stain blocking

• Seals minor dried water stains and tannin

• Seals out solvent-sensitive stains — tar, solvent-based markers, etc.

• Good wet and dry hide

Key Benefits:

OTC Yes LEED® 09 CI Yes

SCAQMD Yes LEED® 09 NC Yes

CARB Yes LEED® 09 CS Yes

CARB SCM

Yes LEED® H and S Yes

MPI Yes NGBS Yes

As of 08/01/2014

Complies with

• Great application characteristics — brush, roll or spray

• Fast dry, sandable and easy cleanup

• Can be used as a pre-wallcovering primer to promote easy removal

• Provides easy “slip” for positioning of wallpaper

• Can be applied in temperatures as low as 35°F

• Meets the most stringent VOC regulations

• Has achieved GREENGUARD® GOLD Certification

Sherwin-Williams.com ©2014 The Sherwin-Williams Company #A100775PD 8/14

Use on Interior:

− Ceiling Tiles

− Paneling

− Wall Laminate

− Cured Plaster

− Drywall

− Varnished Woodwork

− Kitchen Cabinets

− Ceramic Wall Tile

− Under Wallcovering

Use on Interior and Exterior:

− Wood − Aluminum − Galvanized Metal − Previously Painted Surfaces − PVC Piping

− Concrete and Masonry − Many Plastics − Glossy Surfaces − Fiberglass − Copper − Glazed Block

PRODUCT CERTIFIED FOR

LOW CHEMICAL EMISSIONS

UL.COM/GG

UL 2818

12.29.2017 | Page 1

T E C H N I C A L D A T A S H E E T T P R W A L L B A S E

700 series

Roppe Corporation | 1602 N. Union St. - Fostoria, OH 44830 | (800) 537 - 9527

• Extremely Durable

• Extremely Flexible

• Will Not Shrink, Gap or Cup

• Recycleable (IMPACT Recycling Program)

• Qualifies for LEED® Credits

• FloorScore® Certified

Product Description

Technical Data

Roppe 700 Series Wall Base is a unique thermoplastic rubber (TPR) wall base product that is as attractive as it is affordable. 700 Series wall base is incredibly durable, allowing it to stand up to a wide range of use when compared to vinyl wall base.

700 Series wall base is designed for use in both commercial and residential wall base applications.

700 Series wall base is available in various heights, from 2 1/2" to 6", and in cove or no toe to match a variety of flooring installations and application requirements.

700 Series wall base is FloorScore certified, contributes to LEED credits and meets a variety of VOC requirements. 700 Series wall base is manufactured in the USA.

Toe Styles:

Nominal Base Height:

Nominal Base Length:

Nominal Base Thickness:

LEED v2009 IEQ Credit 4.1:

ASTM F1861 – Resilient Wall Base:

ASTM E648 (NFPA 253) - Critical Radiant Flux:

ASTM E662 (NFPA 258) - Smoke Density:

ASTM E84 - Flammability:

CAN/ULC-S102.2 - Surface Burning:

Acclimation Time:

Storage & Acclimation Temperature:

Cove, No Toe

2 1/2" (63.5 mm) 4" (101.6 mm) 4 1/2" (114.3 mm) 6" (152.1 mm)

48" Sections (1.22 m) 120' Rolls (36.58 m)

1/8" (3.2 mm)

Qualifies

Type TP, Group 2, Style A & B

Class I, > 0.45 W/cm2

Passes, <450

Class A

FSR 10, SDS 60

48 Hours

65° - 85° F

Features

Approved Adhesives AW-510 Acrylic Wet-Set Adhesive WB-600 Acrylic Wall Base Adhesive C-630 Contact Adhesive

Additional Accessories Inside and outside factory corners, are available to match wall base installations.

Custom Offerings Product color may be altered to match other colors in 12 carton increments with a minimum of 48 cartons.

Availability, Cost & Samples Roppe Flooring products are sold through distribution. To locate the nearest distributor, visit roppe.com or send an e-mail to support@roppe.

com.

Technical Documents & Support Additional product resources and technical documents are available online at roppe.com. For additional technical support, send an e-mail to solutions@rhctechnical.com.

Additional Information mcelroha

RB-1

T E C H N I C A L D A T A S H E E T

12.29.2017 | Page 2Roppe Corporation | 1602 N. Union St. - Fostoria, OH 44830 | (800) 537 - 9527

T P R W A L L B A S E

700 series

Base Height:

Base Thickness:

Base Length:

Carton Quantity:

Carton Weight - 2 1/2":

Carton Weight - 4":

Carton Weight - 4 1/2":

Carton Weight - 6":

2 1/2" (63.5 mm), 4" (101.6 mm), 4 1/2" (114.3 mm), 6" (152.1 mm) 1/8" (3.2 mm) 48" (1.22 m) Sections 120' (36.58 m) Coils 30 Pieces / 1 Coil 27 lbs.

42 lbs.

45 lbs.

62 lbs.

Cove Base No Toe Base

Wall Base & Corners

Base Height:

Base Thickness:

Base Length:

Carton Quantity:

Carton Weight - 2 1/2":

Carton Weight - 4":

Carton Weight - 6":

2 1/2" (63.5 mm), 4" (101.6 mm), 6" (152.1 mm) 1/8" (3.2 mm) 48" (1.22 m) Sections 120' (36.58 m) Coils 30 Pieces / 1 Coil 25 lbs.

41 lbs.

60 lbs.

Corner Type:

Corner Height:

Corner Thickness:

Corner Return Length:

Corner Carton Quantity:

Carton Weight - 2 1/2":

Carton Weight - 4":

Carton Weight - 6":

Inside & Outside 2 1/2" (63.5 mm), 4" (101.6 mm), 6" (152.1 mm) 1/8" (3.2 mm) 3" 25 Pieces 2 lbs.

3.8 lbs.

5 lbs.

Cove Base Factory Corners

1. PRE-INSTALLATION CHECKLIST

• Consult all associated product literature concerning installation and warranty prior to installation.

• Allow all trades to complete work prior to installation.

• Deliver all materials to the installation location in its original packaging with labels intact.

• Inspect all materials to ensure there is no damage.

• Do not stack pallets to avoid damage.

• Ensure installation area and material storage temperatures are between 65º F (19º C) and 85º F (30º C) and 40% - 65% RH for at least 48 hours before, during and after installation.

• Ensure HVAC system is operational and fully functioning at normal operating conditions 48 hours prior to, during and 48 hours after installation.

• Protect installation area from extreme temperature changes, such as heat and freezing, as well as direct sunlight for at least 48 hours before, during and after installation.

• Do not proceed with installation until all conditions have been met.

2. PRODUCT LIMITATIONS

Do not install materials over existing wall base, flash-coved rubber, vinyl or linoleum flooring, cork, or asphaltic materials. Do not install wall base materials in outdoor areas and in or around commercial kitchens. Do not install in areas that may be subjected to sharp, pointed objects. Do not allow product to be directly exposed to extreme heat sources, such as radiators, ovens or other high-heat equipment.

May be susceptible to staining from harsh disinfectants, cleaning agents, dyes or other harsh chemicals – ensure all chemicals and materials that may come in contact with wall base will not stain, mar or otherwise damage the material prior to use.

3. SUBSTRATE PREPARATION

All substrates must be clean, smooth, permanently dry, flat, and structurally sound. Substrates must be free of visible water or condensation, dust, sealers, water-based / acrylic paint, residual adhesives and adhesive removers, solvents, wax, oil, grease, asphalt, gypsum compounds, visible alkaline salts or excessive efflorescence, mold, mildew and any other extraneous coating, film, material or foreign matter.

Substrate must be a structurally sound interior wall surface, such as dry plaster, cured drywall,…