PWS FPD Critical Skills Updated 18 Feb 25.pdf

Force Protection Detachment Critical Skills Course

High Risk Driving, Advanced Shooting, and Tactical Casualty Care

470TH MILITARY INTELLIGENCE BRIGADE

Part 1

General Information

1. GENERAL: This is a non-personal services contract under which the personnel rendering the services are not subject, either by the contract’s terms or by the manner of its administration, to the supervision and control usually prevailing in relationships between the Government and its employees. The United States (U.S.) Government shall not exercise any supervision or control over the Contractor’s employees performing the tasks herein. Such contract employees shall be accountable solely to the Contractor who, in turn shall be responsible to the U.S. Government.

1.1 Description of Services/Introduction: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to conduct a 5-day basic course (Basic combat firearms, basic first aid, and high risk driving training), a 5-day intermediate course (Intermediate combat firearms, intermediate first aid, and high risk driving training), and an 8-day advanced course (Advanced combat firearms, tactical combat casualty care (TC3) with live tissue, and high risk driving training). The contractor shall be able to train up to twenty-five (25) individuals as defined in this PWS; except for those items specified as government furnished property (GFP) and government furnished services (GFS). The contractor shall perform to the standards in this contract.

1.2 Background: Force Protection Detachment (FPD) Special Agents and Foreign Service National Investigators (FSNI) require training in high-risk driving, shooting, and medical training course to support mission requirements in austere environments outside the Continental United States (OCONUS). In these environments personnel require special weapons tactics (defined in paragraph 1.4) and skills to face active shooters, hostile situations, or kidnapping scenarios in high risk / high threat areas of operation (AOR).

1.3 Objectives: Course participants leave the training with the knowledge, experience, and skills necessary to successfully complete listed for their particular training class (ref 5.1.1, 5,1.2, 5.1.3)

1.4 Scope: Contractor shall provide non-personal services by providing instruction and hands on training in high-risk driving situations, advanced shooting, and TC3 with live tissue training. The Contractor shall provide the training facilities, weapons, ammunition, vehicles, and all course material and items necessary to instruct the course participants.

1.5 Period of Performance:

Base Year: 24 MAR 2025 – 23 MAR 2026 Option Year 1: 24 MAR 2026– 23 MAR 2027 Option Year 2: 24 MAR 2027 – 23 MAR 2028 Option Year 3: 24 MAR 2028 – 23 MAR 2029 Option Year 4: 24 MAR 2029 – 23 MAR 2030

52.217-8: 24 MAR 2030 – 23 SEP 2030

1.6 General Information:

1.6.1 Quality Control Plan (QCP): The Contractor shall develop, implement, and maintain a QCP and program to ensure all work described in this contract is performed at or above the standard defined in the Performance Requirements Summary

(PRS). The QCP is developed by the contractor for its internal use to ensure that it performs and delivers high-quality service. The contractor’s QCP is the means by which the contractor ensures all work complies with the requirements of the contract. The QCP identifies and corrects potential and actual problem areas throughout the entire scope of the contract.

1.6.1.2.1 Inspection Program. Included shall be a quality control inspection program covering all general and specific tasks included in the contract scope of work. It shall specify tasks or areas to be inspected on a scheduled or unscheduled basis, the manner in which inspections are to be conducted, the titles of the individuals who will perform the inspections, and the percentage of the work that will be inspected on a recurring basis. In developing this inspection program, the Contractor shall identify the key activities and associated characteristics in each process that have a significant influence on specific services and provide for methods for evaluation of the selected characteristics.

1.6.1.2.2 Deficiency Identification. The QCP shall include a method of identifying deficiencies in the quality of services performed before the level of performance becomes unacceptable as defined in the PRS. This shall contain processes for corrective action without dependence upon Government direction.

1.6.1.2.3 Deficiency Correction. The program shall contain process control and process performance measurement procedures that shall include how the Contractor shall implement preventive corrective actions. The Contractor shall demonstrate that it has designed quality into the delivery of services thereby mitigating the risk(s) associated with delivery of deficient or nonconforming services.

1.6.1.2.4 Documentation and Enforcement. The QCP shall include a method of documenting and enforcing quality control operations of both prime contractor and subcontractor work; including inspection and testing.

1.6.1.2.5 Trend Analysis. The QCP shall include a method of performing trend analysis and assessments through the use of metrics.

1.6.1.2.6 Surveillance Methods. The QCP shall contain specific surveillance techniques for all contract services. The surveillance methods shall be comprehensive and adaptable to the reporting system of the plan.

1.6.2 Quality Assurance (QA): The government shall evaluate the contractor’s performance under this contract in accordance with (IAW) the Quality Assurance Surveillance Plan. This plan is primarily focused on what the Government must do to ensure that the contractor has performed IAW the performance standards and contract quality requirements are met. Contract quality requirements mean the technical requirements in the contract relating to the quality of the product or service and those contract clauses prescribing inspection, and other quality controls incumbent on the contractor, to ensure the product or service conforms to the contractual requirements. It defines how the performance standards will be applied, the frequency of surveillance, the performance threshold, and deductions, if applicable.

1.6.3 Recognized Holidays: contractor is not required to perform services on holidays.

New Year’s Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Thanksgiving Day Juneteenth Day Christmas Day Independence Day

1.6.4 Hours of Operation: The contractor is responsible for conducting business between the hours of 0700-1900 Central Standard Time (CST) seven (7) days a week, except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. For other than firm fixed price contracts, the contractor will not be reimbursed when the government facility is closed for the above reasons. The Contractor must, at all times, maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons.

1.6.5 Place of Performance: The work to be performed under this contract will be performed at the Contractor’s facility or a training facility obtained by the Contractor.

1.6.6 Type of Contract: The Government anticipates the award of a firm fixed-price type requirements type contract.

1.6.7 Access and General Protection Policy and Procedures:

1.6.7.1 FPCON: In addition to the changes otherwise authorized by clause of the contract, should the US Government Force Protection Condition (FPCON) at any individual installation change, the Government may require changes in contractor security matters or process in accordance with DoDI 2000.16. During FPCONs Charlie and Delta, only contract services that have been deemed “mission essential” by the Government will continue. Contract services will resume when the FPCON is reduced to Bravo or lower.

1.6.7.2 Physical Security: Reserved.”

1.6.7.3 Escorts: Reserved.

1.6.7.4 Personnel Security Clearance Requirements: Reserved

1.6.7.5 Background Checks: The Contractor shall ensure contractor employees and subcontractor employees performing services under this contract have passed a security check conducted by the State Police Department of their U.S. residence. Security checks that have been completed as part of a personnel security clearance background investigation, or a previous background check that was a condition of employment, meet this requirement. Documentation of these checks will be made available to the KO or COR within 10 days of request. The Government retains the right to exclude any employee from performance of duties under this contract if a background security check reveals an employee is a security risk. The exclusion of an employee for security reasons will not relieve the Contractor from performance of services required under this contract. If the Government determines additional background checks are required, at a minimum, and upon request from the Government, the Contractor shall provide to the KO or COR, the following information on any contractor or subcontractor employee performing services under this contract:

• Full birth name

• Married name (if applicable)

• SSN or local equivalent (ID card number)

• Date of birth

• Place of birth (city, country)

1.6.7.5.1 Background Check Notification Requirements: If a background check on any employee or subcontractor employee performing services under this contract, whether the check was conducted as a condition of employment or as part of the contract with the Government, reveals any information from any source of criminal activity by Contractor employees, subcontractors, or subcontractor employees, the Contractor shall notify the KO and COR of that information within 24 hours. The Contractor shall make notification of:

(1) Traffic violations, other than parking, will be reported to the KO or COR only if the contract is for drivers for the Government.

(2) Any suspicious activity by Contractor employees, subcontractors, or subcontractor employees the Contractor believes may pose a risk to U.S. or host nation national security or imminent risk of deadly bodily harm to any person; and

(3) Any actions taken against Contractor employees, subcontractors, or subcontractor employees pursuant to this requirement.

1.6.7.5.2 Remedies. In addition to other remedies available to the Government, the Contractor’s failure to comply with the requirements of this paragraph my result in requiring the Contractor to remove a Contractor employee or employees from the performance of the contract.

1.6.7.5.3 Subcontracts. The Contractor shall include the substance of this paragraph and the preceding paragraph in all subcontracts.

1.6.7.6 Uncleared Contractor Common Access Card (CAC) Credentialing and Access Procedures:

Reserved

1.6.7.7 Employment Eligibility: The Contractor shall ensure that all Contractor employees and sub-contractor employees performing services under this contract in the U.S. or its territories have been pre-screened for employment eligibility using the E-verify Program on the Department of Homeland Security website http://www.uscis.gov/e-verify. Personnel that have not met the employment eligibility requirement on this website are not authorized to perform services under this contract. Verification of the eligibility check will be made available to the KO or COR within three (3) days of request. This requirement is not in lieu of and does not relieve the Contractor from the I-9 Employment Eligibility Verification Forms for employment of personnel.

1.6.7.8 Reserved

1.6.8 Post Award Conference/Contract Periodic Progress Meetings: The Contractor shall attend the post award conference convened by the contracting activity or contract administration office IAW Federal Acquisition Regulation (FAR) Subpart 42.5. The KO, COR, with other Government personnel, as appropriate, may meet periodically with the Contractor to review the Contractor's performance. At these meetings the KO will apprise the contractor of how the government views the Contractor's performance and the Contractor will apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the government.

1.6.9 Contracting Officer Representative (COR): The COR will be identified by separate letter. The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: ensure the Contractor performs the technical requirements of the contract; perform inspections necessary in connection with contract performance; maintain written and oral communications with the Contractor concerning technical aspects of the contract; issue written interpretations of technical requirements, including Government drawings, designs, specifications; monitor Contractor's performance and notifies both the KO and Contractor of any deficiencies; coordinate availability of government furnished property; and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates, or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

1.6.10 Key Personnel: The following contractor personnel are considered key personnel by the government: Contract manager/alternate contract manager and On-site Lead Trainer. The Contractor shall provide a contract manager who shall be responsible for the performance of the work. The name of this person and an alternate, who shall act for the Contractor when the manager is absent, shall be designated in writing to the Contracting Officer within three (3) days of contract award. Contract Manager and alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The Contract Manager or alternate shall be available between the hours of 0700 hours to 1900 hours Central Standard Time (CST).

1.6.11 Special Qualifications or Certifications:

1.6.11.1 Contractor personnel training Tactical Combat Casualty Care (TC3) shall have experienced in the delivery of care in all three (3) phases of Tactical Combat Casualty Care (Care Under Fire, Tactical Field Care, and Tactical Evaluation Care) or Tactical Paramedic-Certified or National Association of Emergency Medical Technician TC3 tier 2 or 3 certified or National Association of Emergency Medical Technician Instructor Certified or a former U.S. Army 18D.

1.6.11.1 IA/IT Training Certification: Reserved.

http://www.uscis.gov/e-verify

1.6.12 Identification of Contractor Employees: Contractor employees shall identify themselves as Contractor personnel and shall avoid representing themselves as Government employees. This identification includes meeting attendance, answering Government telephones, email communications, and working in other situations where Contractor status is not obvious. Contractor personnel identification shall be easily identifiable through the display of badges, name tags, lanyards, etc.

1.6.12.1 Badging of Contractor Employees: Reserved

1.6.12.2 Uniform: Reserved.

1.6.13 Contractor Travel: Reserved

1.6.14 Other Direct Costs (ODC): Reserved

1.6.15 Data Rights: Reserved

1.6.16. Non-Disclosure Requirements: Performance under this contract may require the Contractor to access data and information proprietary to a Government agency, another Government Contractor, or of such nature that its dissemination or use other than as specified in this work statement would be adverse to the interests of the Government or others. Neither the Contractor, nor Contractor personnel, shall divulge, nor release data or information developed, or obtained under performance of this work statement, except to authorize Government personnel or upon written approval of the KO. The Contractor shall not use, disclose, or reproduce proprietary data, which bears a restrictive legend, other than as specified in this PWS. All documentation showing individual names or other personal information shall apply and shall be controlled and protected under the provisions of the Privacy Act of 1974, Public Law 93-579, 5 United States Code (U.S.C.) Section 552a.

1.6.16.1 Non-Disclosure Statements: Reserved

1.6.16.2 Advertisement and Social Media: The Contractor shall NOT post information to public website or social media locations, personal or professional, that in any way disclose names, locations, hotel data, participants, discussions, pictures, etc. before, during or after the contract period of performance without the express consent of the Government. The use of propaganda violates DOD Commercial Use of Imagery Guidelines stated at (www.dimoc.mil/resourcess/limitations/). The Contractor shall not cite any information (e.g., contract information, pictures, locations, etc.) obtained through this contract on any marketing tools to include its company website.

1.6.16.3 Information Assurance: At no time will the Contractor or associated sub-contractor employees transmit government documents or information over using methods that do not meet the security requirements specified in the National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171, "Protecting Controlled Unclassified Information in Nonfederal Information Systems and Organizations" such as personal electronic mail accounts, public digital data storage sites (cloud storage), social media platforms or instant messaging. Approved government sites such as U.S. Army Aviation and Missile Research Development and Engineering Center (ARMDEC) Safe Exchange at https://safe.amrdec.army.mil/SAFE/About.aspx, or All Partners Access Network (APAN) at https://community.apan.org/, or other transmission means determined by the government must be used.

1.6.17 Organizational Conflict of Interest (OCI): Reserved

1.6.18 Phase-in/Phase-Out (PIPO) Period: Reserved

1.6.19 General Training Requirements:

1.6.19.1 Anti-Terrorism (AT) Level I Training: Reserved

http://www.dimoc.mil/resourcess/limitations/

1.6.19.2 OPSEC Awareness: If the Contractor, or a subcontractor, or employees of either disclose any information that disrupts or harms the Government's operations or activities, then the Government retains the right to exclude any employee from performance of duties under this contract. The exclusion of an employee for security reasons will not relieve the Contractor from performance of services required under this contract. By way of example, personnel shall not sketch or take photos of government facilities or activities, unless related to service to be provided. All government paper products and removable digital storage material that is received, generated, or stored during the contract will be destroyed completely when no longer needed to preclude recognition of information.

1.6.19.3 Information Assurance (IA) Training: Reserved

1.6.19.4 Information Assurance (IA)/Information Technology (IT) Training: Reserved

1.6.19.5 Threat Awareness Reporting Program (TARP Training): Reserved

1.6.19.6 iWATCH Training: Reserved

1.6.19.7 OPSEC Training: Reserved

1.6.20 Overseas Training Requirements: Reserved

PART 2

DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1. Definitions:

2.1.1 Area of Responsibility. The U.S. Southern Command (USSOUTHCOM) area of responsibility (AOR) includes the geographic areas of Antigua and Barbuda, Argentina, Aruba, Barbados, Belize, Bolivia, Brazil, British Virgin Islands, Cayman Islands, Chile, Colombia, Costa Rica, Cuba, Curacao, Dominica, Dominican Republic, Ecuador, El Salvador, Falkland Islands, French Guiana, Grenada, Guadeloupe, Guatemala, Guyana, Haiti, Honduras, Jamaica, Martinique, Mayotte, Montserrat, Nicaragua, Panama, Paraguay, Peru, Saint Barthélemy, Saint Martin, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Saint Maarten, Suriname, Trinidad and Tobago, Turks and Caicos Islands, Uruguay, and Venezuela.

2.1.2. Contractor. The total contractor organization or a separate entity of it; such as an affiliate, division, or plant that performs its own purchasing.

2.1.3. Contracting officer (KO). A person with the authority to enter into, administer, and/or terminate contracts and make related determinations and findings.

2.1.4. Contracting Officer’s Representative (COR). An individual designated and authorized in writing by the contracting officer to perform specific technical or administrative functions.

2.1.5. Defective Service. A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.6. Deliverable. Anything that can be physically delivered but may include non-manufactured things such as meeting minutes or reports.

2.1.7. Foreign National. A foreign national is not a U.S. citizen. Green card holders are also identified as foreign nationals. A foreign national is further categorized as either a third country national or a local national based on the person’s citizenship and location of performance of duty.

2.1.8. Key Personnel. Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.9. Local National. Local nationals are foreign nationals who are citizens of the country where the performance of duty will occur.

2.1.10. Performance Work Statement (PWS). A statement of work for performance-based acquisitions that describes the required results in clear, specific, and objective terms with measurable outcomes.

2.1.11. Physical Security. Protection of the perimeter area, government property, and assets that prevent the loss or damage of Government property.

2.1.12. Quality Assurance. The various functions, including inspection, performed by the government to determine whether a Contractor has fulfilled the contract obligations pertaining to quality and quantity.

2.1.13. Quality Assurance Surveillance Plan (QASP). A plan describing how the agency will survey, observe, test, sample, evaluate and document the Contractor’s performance in meeting critical performance standards identified in the contract.

2.1.14. Quality Control (QC). Tasks performed by the Contractor to improve the quality of the organization’s output.

2.1.15. Shall. An imperative command; has a duty to or is required to. Denotes that a regulation must be followed unless the contracting officer has obtained a deviation.

2.1.16. Subcontractor. Any supplier, distributor, vendor, or firm that furnishes supplies or services to or for a prime contractor or another subcontractor.

2.1.17. Third Country National. Third country nationals are foreign nationals who are not citizens of the country where the performance of duty will occur.

2.1.18. Work Day. The number of hours per day the Contractor provides services in accordance with the contract.

2.1.19. Work Week. Monday through Friday, unless specified otherwise.

2.2 Acronyms:

AFFSSIR Armed Forces Repository of Specimen Samples ALMS Army Learning Management System ANSI American National Standards Institute AOR Area of Responsibility AR Army Regulation ATCTS Army Training Certification Tracking System AT Anti-Terrorism CAC Common Access Card CST Central Standard Time CFR Code of Federal Regulations CI Counterintelligence CLIN Contract Line Item Number CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative DD Form 254 Department of Defense Contract Security Requirement List DNA Deoxyribonucleic Acid (DNA) DOD Department of Defense DODD Department of Defense Directive DODI Department of Defense Instruction FAR Federal Acquisition Regulation FHP Force Health Protection FCG Foreign Clearance Guide FN Foreign National FPD Force Protection Detachment FSNI Foreign Service National Investigators FY Fiscal Year GFE Government Furnished Equipment GFP Government Furnished Property GFS Government Furnished Services IA Information Assurance IAW In Accordance With IT Information Technology JPAS Joint Personnel Adjudication System JTR Joint Travel Regulation KO Contracting Officer LN Local National

LOA Letter of Authorization NCIC-III National Crime Information Center Interstate Identification Index NIST National Institute of Standards and Technology NTV Non-Tactical Vehicle ODC Other Direct Costs OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs OSHA Occupational Safety and Health Administration OPSEC Operation Security PIPO Phase In/Phase Out PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QASP Quality Assurance Surveillance Plan QCP Quality Control Program RA Requiring Activity SCR Service Contract Reporting SOP Standard Operating Procedures SPOT Synchronized Pre-deployment and Operational Tracker TC3 Tactical Combat Casualty Care TCN Third Country National TE Technical Exhibit TSDB Terrorist Screening Data Base U.S.C. United States Code USSOUTHCOM United States Southern Command

PERFORMANCE WORK STATEMENT (PWS)

Version 1

October 2023

PART 3

Page 10 of 410th Ver 1 2023-10

Government Furnished Equipment (GFE), Government Furnished Property (GFP), and Government

Furnished Services (GFS)

3. GOVERNMENT FURNISHED ITEMS AND SERVICES:

3.1. Services: Reserved

3.2 Facilities: Reserved

3.3 Utilities: Reserved

3.4 Equipment: Reserved

3.5 Materials: Reserved

3.6 Common Access Cards (CAC): Reserved

October 2023

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4. CONTRACTOR FURNISHED ITEMS AND RESPONSIBILITIES:

4.1 General: The Contractor shall furnish all supplies, equipment, facilities and services required to perform work under this contract that are not listed under Part 3 of this PWS.

4.2 Facility Security Clearance: Reserved.

4.3. Materials: The Contractor shall provide all training materials needed to educate course participants.

The Contractor shall also provide a certificate of course completion for participants that successfully completed the training.

4.4. Equipment: The Contractor shall provide all firearms and ammunition for this training. The firearms will be Sig Sauer P320 / M-17 or M18 9mm pistol with concealed holster from the hip, belt, or appendix.

The contractor shall also provide M4 Carbine / AR-15 rifles. The Contractor shall provide one (1) firearm per student during firearm training. The Contractor shall provide all vehicles and materials to support the driving training to include all safety equipment (helmet, gloves, glasses, etc.). The contractor shall provide vehicles for the course. The contractor is responsible for all maintenance, parts, gas, oils, and tires.

October 2023

PART 5

SPECIFIC TASKS

5. Specific Tasks: Contractor shall provide non-personal services by providing instruction in a basic combat firearms, basic first aid, intermediate combat firearms, intermediate first aid, advanced combat firearms, tactical combat casualty care (TC3) with live tissue, and high-risk driving training. The Contractor shall provide the training facility, weapons, ammunition, vehicles, and all course material and items necessary to instruct the course participants.

5.1.1 5-Day Basic Course (2-days Firearms Training, 2-Days Drivers Training, 1-Day Medical Training)

5.1.1.1 The contractor shall provide basic training on combat pistol marksmanship development for Sig

Sauer P320 / M-17 or M18 9mm pistol to include fundamentals of marksmanship, loading / unloading /reloading, immediate action drills for firearm malfunction, proper and safe drawing techniques utilizing concealed holsters, and accuracy enhancement drills from the standing and kneeling positions and while moving.

STD: No less than 15 Sig Sauer P320 / M-17 or M18 9mm pistols available at all times during range operations.

AQL: 100% compliant

5.1.1.2 The contractor shall conduct weapons qualification for Sig Sauer P320 / M-17 or M18 9mm pistol.

STD: The contractor shall provide weapon qualification range and scorecard IAW CIDR 195-1.

STD: All participants qualify IAW CIDR 195-1.

AQL: 100% Compliant

5.1.1.3 The contractor shall conduct driving training on pavement, concrete, asphalt, or any other typical improved roadway surface.

STD: The contractor shall ensure that each vehicle executing training during driving scenarios includes an instructor.

STD: The contractor shall use light armored vehicles for driver training.

5.1.1.4 The contractor shall conduct barricade breaching training that will include overcoming adversarial employment of barricades and obstacles, particularly the use of other vehicles, to trap or channel students into an ambush situation. Contractor training shall include high-speed backing, evasive maneuvers (driving around the obstacle), and ramming through the obstacle by use of the student’s vehicle.

STD: The contractor shall use non-tactical vehicles (NTV) for driver training.

STD: The contractor shall use both manual and automatic transmissions for this training.

5.1.1.5 The contractor shall conduct training on the indications and warnings of a pending ambush to include adversarial preparation of the environment to conduct an ambush and physical features of ideal ambush locations.

October 2023

STD: The contractor shall use automatic transmissions for this training.

5.1.1.6 The contractor shall conduct training on evasive driving techniques to include controlled acceleration, evasive steering, collision avoidance, shuffle steering, forward and reverse serpentine, brake and evade, down driver drills, controlling insipient skidding, precision intervention technique (PIT) maneuvers, and open road ramming.

5.1.1.7 The contractor shall conduct training on recognition of obstacles and hazards on paved surfaces, evaluation and decision-making factors to avoid or overcome the obstacle by going through, over, or around.

STD: The contractor shall use non-tactical vehicles (NTV) for driver training.

5.1.1.8 The contractor shall conduct training on escape drills to include driving in close proximity with other tactical drivers, side-by-side or in a file, while avoiding collisions.

5.1.1.9 The contractor shall conduct hands-on first aid training that will include: evaluate a casualty, splint fractures, apply a tourniquet to control extremity, apply an occlusive dressing, apply a hemostatic dressing, apply preventive measures to control shock, perform casualty burn care, apply an emergency bandage, and perform casualty movement.

STD: The contractor shall conduct training IAW Army TC 4-02.1.

AQL: 100% Compliant

5.1.2 5-Day Intermediate Course (2-days Firearms Training, 2-Days Drivers Training, 1-Day Medical Training)

5.1.2.1 The contractor shall provide training on combat pistol tactical development for Sig Sauer P320 / M-17 or M18 9mm pistol to include unconventional shooting positions, use of barricades, shooting from around vehicles, and shooting while moving.

STD: No less than 15 Sig Sauer P320 / M-17 or M18 9mm pistols available at all times during range operations.

October 2023

AQL 100% compliant

5.1.2.2 The contractor shall provide training on combat pistol react to contact for Sig Sauer P320 / M-17 or M18 9mm pistol to include live-fire drills.

STD: No less than 15 Sig Sauer P320 / M-17 or M18 9mm pistols available at all times during range

AQL 100% compliant

5.1.2.3 The contractor shall conduct weapons qualification for Sig Sauer P320 / M-17 or M18 9mm pistol.

AQL: 100% Compliant

5.1.2.4 The contractor shall conduct driving training on pavement, concrete, asphalt, or any other typical

5.1.2.5 The contractor shall conduct barricade breaching training that will include overcoming adversarial employment of barricades and obstacles, particularly the use of other vehicles, to trap or channel students into an ambush situation. Contractor Training shall include high-speed backing, evasive

5.1.2.6 The contractor shall conduct training on the indications and warnings of a pending ambush to ideal ambush locations.

5.1.2.7 The contractor shall conduct training on evasive driving techniques to include controlled serpentine, brake and evade, down driver drills, controlling insipient skidding, precision intervention technique (PIT) maneuvers, and open road ramming.

October 2023

STD: The contractor shall use non-tactical vehicles (NTV) for driver training

5.1.2.8 The contractor shall conduct training on recognition of obstacles and hazards on paved surfaces, or around.

STD: The contractor shall use non-tactical vehicles (NTV) for driver training.

5.1.2.9 The contractor shall conduct training on escape drills to include driving in close proximity with

5.1.2.10 The contractor shall train the participants in providing life-saving techniques from the point of injury to transporting casualties to higher level medical care. The contractor shall focus on self-aid, buddy-aid, and aiding other people with different trauma scenarios that include single to multiple wounds.

STD: The contractor shall conduct training IAW the Tactical Combat Casualty Care Guidelines as prescribed by the Committee on Tactical Combat Casualty Care.

5.1.3 8-Day Advanced Course (3-days Firearms Training, 2-Days Drivers Training, 3-Day Medical Training)

5.1.3.1 The contractor shall provide training on combat firearms tactical development for Sig Sauer P320 / M-17 or M18 9mm pistols and M4 carbine or AR-15 to include unconventional shooting positions, use of barricades, shooting from around vehicles, and shooting while moving.

STD: No less than 15 Sig Sauer P320 / M-17 or M18 9mm pistols and M4 carbine or AR-15 available at all times during range operations.

AQL 100% compliant.

5.1.3.2 The contractor shall conduct training on shooting and driving drills to include concealed carry and weapons manipulation, employment of pistol to include engaging from the vehicle, engaging targets through the vehicle.

STD: The contractor shall conduct training with Sig Sauer P320 / M-17 or M18 9mm pistols.

ACQL- 100% compliant.

5.1.3.3 The contractor shall instruct course participants in maneuvering vehicle under duress, down driver drills, dismounting or ditching the vehicle if disabled while continuing to engage targets on foot, October 2023 and establishing a strong point to defend.

STD: The contractor shall conduct training with Sig Sauer P320 / M-17 or M18 9mm pistols.

5.1.3.4 The contractor shall provide advance training on combat firearms react to contact times for the Sig Sauer P320 / M-17 or M18 9mm pistols and M4 Carbine or AR-15 to include live-fire drills mounted and dismounted.

STD: No less than 15 Sig Sauer P320 / M-17 or M18 9mm pistols and M4 carbine or AR-15 available at all times during range operations.

5.1.3.5 The contractor shall conduct weapons qualification for Sig Sauer P320 / M-17 or M18 9mm pistol.

AQL: 100% Compliant

5.1.3.6 The contractor shall conduct driving training on pavement, concrete, asphalt, or any other typical

5.1.3.7 The contractor shall conduct barricade breaching training that will include overcoming adversarial employment of barricades and obstacles, particularly the use of other vehicles, to trap or channel students into an ambush situation. Contractor Training shall include high-speed backing, evasive

5.1.3.8 The contractor shall conduct training on the indications and warnings of a pending ambush to ideal ambush locations.

5.1.3.9 The contractor shall conduct training on evasive driving techniques to include controlled

October 2023 serpentine, brake and evade, down driver drills, controlling insipient skidding, precision intervention technique (PIT) maneuvers, and open road ramming.

5.1.3.10 The contractor shall conduct training on recognition of obstacles and hazards on paved surfaces, or around.

STD: The contractor shall use non-tactical vehicles (NTV) for driver training.

5.1.3.11 The contractor shall conduct training on escape drills to include driving in close proximity with

5.1.3.12 The contractor shall conduct hands-on medical training that will include real-life critical trauma scenarios that prepares participants to react to single and multiple casualties under tactical conditions. The contractor shall train the participants in providing life-saving techniques from the point of injury to transporting casualties to higher level medical care. The contractor shall conduct live tissue medical training focused on self-aid, buddy-aid, and aiding other people with different trauma scenarios that include single to multiple wounds.

STD: The contractor shall conduct training IAW the Tactical Combat Casualty Care Guidelines as prescribed by the Committee on Tactical Combat Casualty Care.

5. x. Service Contract Reporting (SCR): Reserved

October 2023

PART 6

APPLICABLE PUBLICATIONS

6. APPLICABLE PUBLICATIONS (CURRENT EDITIONS)

6.1 U.S. Army Field Manual FM 3-23.35: Combat Training with Pistols, M9 and M11

6.2 U.S. Army Field Manual FM 3-21.75: The Warrior Ethos and Soldier Combat Skills

6.3 U.S. Army Field Manual FM 3-20.21: Tactics, Techniques, and Procedures for Counterinsurgency Operations

6.4 U.S. Army Training Publication 4-02.13: Casualty Evacuation

6.5 U.S. Army Training Circular 4-02.1: First Aid

6.6 U.S. Army Criminal Investigation Division Regulation 195-1: Criminal Investigation Operational Procedures

October 2023

ATTACHMENT 1

Performance Requirements Summary The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The standard should relate to timeliness, quality, or quantity (metrics) of service required by the Contractor is stated in the PWS verbiage. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success.

Performance Objective Standard Performance Threshold (This is the maximum error rate.

It could possibly be “Zero deviation from standard”)

Acceptable Quality Levels (AQL’s)

Method of Surveillance

PRS#1 - PWS para 5.1.1.1 Basic Pistol. The contractor shall provide basic training on combat pistol marksmanship development for Sig Sauer P320 / M-17 or M18 9mm pistol to include fundamentals of marksmanship, loading / unloading /reloading, immediate action drills for firearm malfunction, proper and safe drawing techniques utilizing concealed holsters, and accuracy enhancement drills from the standing and kneeling positions and while moving.

No less than 15 Sig Sauer P320 / M-17 or M18 9mm pistols available at all times during range operations.

100% Compliance Periodic Inspection

PRS#2 - PWS para 5.1.1.2 Weapon Qualification. The contractor shall conduct weapons qualification for Sig Sauer P320 / M-17 or M18 9mm pistol.

The contractor shall provide weapon qualification range and scorecard IAW CIDR 195-1. All participants qualify IAW CIDR 195-1.

100% Compliance Periodic Inspection

PRS #3 - PWS para 5.1.1.3 Driving Improved Surface. The contractor shall conduct driving training on pavement, concrete, asphalt, or any other typical improved roadway surface.

The contractor shall ensure that each vehicle executing training during driving scenarios includes an instructor.

100% Compliance Periodic Inspection

October 2023

PRS #4 - PWS para 5.1.1.4 Barricade Breaching. The contractor shall conduct barricade breaching training that will include overcoming adversarial employment of barricades and obstacles, particularly the use of other vehicles, to trap or channel students into an ambush situation. Contractor training shall include high-speed backing, evasive maneuvers (driving around the obstacle), and ramming through the obstacle by use of the student’s vehicle.

The contractor shall use non-tactical vehicles (NTV) for driver training. The contractor shall use both manual and automatic transmissions for this training.

100% Compliance Periodic Inspection

PRS #5 - PWS para 5.1.1.5 I&W Ambush. The contractor shall conduct training on the indications and warnings of a pending ambush to include adversarial preparation of the environment to conduct an ambush and physical features of ideal ambush locations.

The contractor shall use non-tactical vehicles (NTV) for driver training. The contractor shall use automatic transmissions for this training.

100% Compliance Periodic Inspection

PRS #6 - PWS para 5.1.1.6 Evasive Driving. The contractor shall conduct training on evasive driving techniques to include controlled acceleration, evasive steering, collision avoidance, shuffle steering, forward and reverse serpentine, brake and evade, down driver drills, controlling insipient skidding, precision intervention technique (PIT) maneuvers, and open road ramming.

The contractor shall use non-tactical vehicles (NTV) for driver training. The contractor shall use automatic transmissions for this training.

100% Compliance Periodic Inspection

PRS #7 - PWS para 5.1.1.7 Obstacle and Hazard Recognition.

The contractor shall conduct barricade breaching training that will include overcoming adversarial employment of barricades and obstacles, particularly the use of other vehicles, to trap or channel students into an ambush situation.

Contractor Training shall include high-speed backing, evasive maneuvers (driving around the obstacle), and ramming through the obstacle by use of the student’s vehicle.

The contractor shall use non-tactical vehicles (NTV) for driver training. The contractor shall use automatic transmissions for this training.

October 2023

PRS #8 - PWS para 5.1.1.8 Escape Drills. The contractor shall conduct training on the indications and warnings of a pending ambush to include adversarial preparation of the environment to conduct an ambush and physical features of ideal ambush locations.

The contractor shall use non-tactical vehicles (NTV) for driver training. The contractor shall use automatic transmissions for this training.

100% Compliance Periodic Inspection

PRS #9 - PWS para 5.1.1.9 First Aid. The contractor shall conduct hands-on first aid training that will include: evaluate a casualty, splint fractures, apply a tourniquet to control extremity, apply an occlusive dressing, apply a hemostatic dressing, apply preventive measures to control shock, perform casualty burn care, apply an emergency bandage, and perform casualty movement.

The contractor shall conduct training IAW Army TC 4-02.1.

100% Compliance Periodic Inspection

PRS #10 - PWS para 5.1.2.1 Tactical Pistol Development. The contractor shall provide training on combat pistol tactical development for Sig Sauer P320 / M-17 or M18 9mm pistol to include unconventional shooting positions, use of barricades, shooting from around vehicles, and shooting while moving.

No less than 15 Sig Sauer P320 / M-17 or M18 9mm pistols available at all times during range operations.

100% Compliance Periodic Inspection

PRS #11 - PWS para 5.1.2.2 Pistol React to Contact. The contractor shall provide training on combat pistol react to contact for Sig Sauer P320 / M-17 or M18 9mm pistol to include live-fire drills

No less than 15 Sig Sauer P320 / M-17 or M18 9mm pistols available at all times during range

October 2023

PRS #12 - PWS para 5.1.2.10 Tactical Combat Casualty Care.

The contractor shall train the participants in providing life-saving techniques from the point of injury to transporting casualties to higher level medical care. The contractor shall focus on self-aid, buddy-aid, and aiding other people with different trauma scenarios that include single to multiple wounds.

The contractor shall conduct training IAW the Tactical Combat Casualty Care Guidelines as prescribed by the Committee on Tactical Combat Casualty Care.

100% Compliance Periodic Inspection

PRS #13 - PWS para 5.1.3.1 Tactical Pistol and Rifle Development. The contractor shall provide training on combat firearms tactical development for Sig Sauer P320 / M-17 or M18 9mm pistols and M4 carbine or AR-15 to include unconventional shooting positions, use of barricades, shooting from around vehicles, and shooting while moving.

No less than 15 Sig Sauer P320 / M-17 or M18 9mm pistols and M4 carbine or AR-15 available at all times during range operations.

100% Compliance Periodic Inspection

PRS #14 - PWS para 5.1.3.2 Shooting and Driving. The contractor shall conduct training on shooting and driving drills to include concealed carry and weapons manipulation, employment of pistol to include engaging from the vehicle, engaging targets through the vehicle.

The contractor shall conduct training with Sig Sauer P320 / M-17 or M18 9mm pistols.

100% Compliance Periodic Inspection

PRS #15 - PWS para 5.1.3.3 Vehicle Maneuvering Under Duress. The contractor shall instruct course participants in maneuvering vehicle under duress, down driver drills, dismounting or ditching the vehicle if disabled while continuing to engage targets on foot, and establishing a strong point to defend

The contractor shall conduct training with Sig Sauer P320 / M-17 or M18 9mm pistols.

100% Compliance Periodic Inspection

PRS #16 - PWS para 5.1.3.4 Pistol and Rifle react to Contact. The contractor shall provide advance training on combat firearms react to contact times for the Sig Sauer P320 / M-17 or M18 9mm pistols and M4 Carbine or AR-15 to include live-fire drills mounted and dismounted.

No less than 15 Sig Sauer P320 / M-17 or M18 9mm pistols and M4 carbine or AR-15 available at all times during range operations.

October 2023

PRS #17 - PWS para 5.1.3.12 Tactical Combat Casualty Care with Live Tissue. The contractor shall conduct hands-on medical training that will include real-life critical trauma scenarios that prepares participants to react to single and multiple casualties under tactical conditions. The contractor shall train the participants in providing life-saving techniques from the point of injury to transporting casualties to higher level medical care. The contractor shall conduct live tissue medical training focused on self-aid, buddy-aid, and aiding other people with different trauma scenarios that include single to multiple wounds.

The contractor shall conduct training IAW the Tactical Combat Casualty Care Guidelines as prescribed by the Committee on Tactical Combat Casualty Care.

October 2023

ATTACHMENT 2

Deliverables Schedule

Deliverable Frequency # of Copies Medium/Format Submit To

1.6.1 Quality

Control Plan

(QCP)

Within 7 days of request

One copy Electronic KO

1.6.7.5 Background Checks

Within 10 days of request

One copy Electronic KO or COR

1.6.7.7 Employment Eligibility

Within 3 days of request

One copy Electronic KO or COR

1.6.10 Key

Personnel

Within 3 days of contract award

One copy Electronic KO

1.6.11 Special

Qualifications or Certifications

Within 3 days of request

Once copy Electronic KO or COR

5.1.1 5-Day Basic Course

Once per training iteration to be completed upon immediate completion of the training.

One copy per participant.

Digital copy either Word or PDF document that includes courses completion status for all participants.

COR

5.1.1.2, 5.1.2.3,

5.1.3.5 Weapon

Qualification Card

Once per training iteration to be completed upon immediate completion of the training.

One copy per participant.

Digital copy PDF document CID Form 85-E-R 05 Jun 17 that includes weapon qualification score for each participant.

COR

5.1.2 5-Day Intermediate Course

Once per training iteration to be completed upon immediate completion of the training.

One copy per participant.

Digital copy either Word or PDF document that includes courses completion status for all participants.

COR

5.1.3 8-Day Advanced Course

Once per training iteration to be completed upon immediate completion of the training.

One copy per participant.

Digital copy either Word or PDF document that includes courses completion status for all participants.

COR

ATTACHMENT 2