QA_W912CH26R0055.xlsx
XLSX spreadsheet 11 KB Posted
- Attached to
- Ground Hop Kit
- Solicitation number
- W912CH-26-R-0055
- Issued by
-
Department of the Army
About this file
This is a Questions and Answers document for Army Contracting Command solicitation W912CH-26-R-0055 for a Ground Hop Kit (Part Number 12298101, NSN 4910-01-115-6283). The document clarifies Factory Acceptance Test (FAT) requirements for wiring harness components contained within the kit.
The Q&A addresses a critical misconception regarding FAT quantities, clarifying that the stated 23 units do not represent 23 complete kits but rather individual wiring harness parts requiring testing. Specifically, three test samples are required for each of seven part numbers (12298170, 12298168, 12484297, 12298171, 12298169, 12358987, and 12381627), while two samples are required for part number 12488241. To reduce overall FAT burden, contractors may utilize a single actual manufacturer for all wiring harness configurations. If the contractor employs one manufacturer and achieves successful FAT approval for parts 12298170 and 12488241 using the required three and two test samples respectively, that manufacturer is approved to waive FAT requirements for the remaining six harness configurations, contingent upon Section E requirements in the Technical Data Package for Kit 12298101.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| QA_W912CH26R0055.xlsx | XLSX spreadsheet | |
| W912CH26R0055-0003 Amendment.pdf | ||
| QA_W912CH26R0055.xlsx | XLSX spreadsheet | |
| QA_W912CH26R0055.xlsx | XLSX spreadsheet | |
| W912CH26R0055-0002 Amendment.pdf | ||
| W912CH26R0055 Solicitation.pdf | ||
| W912CH25R0055_0001 Amendment.pdf | ||
| First-Article-Waiver-Worksheet (1).pdf | ||
| OPSEC_PLAN_2025.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| Number | QUESTION | ANSWER |
| 1 | The FAT quantities state 23 in total of each configuration that will be consumed. Is that as follows? |
12298168 – Qty 23 12298169 – Qty 23 12298170 – Qty 23 12298171 – Qty 23 12358987 – Qty 23 1238127 – Qty 23 12484297-1 – Qty 23 12484297-2 – Qty 23
| 12488241 – Qty 23 | The quantity of 23 units for FAT is correct; however, this number does not refer to 23 whole kits but rather to the individual wiring harness parts contained within the kit. This kit contains multiple wiring harness part numbers, each requiring FAT testing. Specifically, three samples are required for each of the following part numbers: 12298170, 12298168, 12484297, 12298171, 12298169, 12358987, and 12381627. Additionally, two samples are required for part number 12488241. To reduce the total number of FATs, the contractor may utilize a single actual manufacturer for all wiring harness configurations. Please see the attached additional Section E language for Kit 12298101 for further details. This Kit contains 8 wiring harnesses / cables that all have FAT Requirements. If the contractor uses a single actual manufacturer to produce all of the wiring harnesses and completes a successful (approved) FAT against parts 12298170 and 12488241, using the required three (3) and two (2) test samples respectively, the actual manufacturer is approved to waive the six (6) FATs for the remaining harness configurations. See SEction E for Kit in the TDP. |
| 2 | |
| 3 | |
| 4 | |
| 5 | |
| 6 |
File details come from the government source that posted it. Updated .