W912CH24R0205-0005_SAM.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0005 2026JUL01

W912CH

ACC-DTA

6501 E. 11 MILE RD.

DETROIT ARSENAL, MI 48397-5000

CHRISTINA HERBIG

EMAIL: CHRISTINA.A.HERBIG.CIV@ARMY.MIL

W912CH-24-R-0205

2025JUN05

X

X 2026JUL31 03:00pm

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 61

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: CHRISTINA HERBIG

Buyer Office Symbol/Telephone Number: CCTA-APN-C/(571)588-8863

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

SOLICITATION: W912CH-24-R-0205

AMENDMENT: 0005

1. The purpose of this Amendment is to:

SF 1449:

a) Re-open the solicitation from 15 August 2025 to 31 July 2026. Proposals shall be submitted electronically to email address christina.a.herbig.civ@army.mil and amy.m.dombrowski.civ@army.mil, by 3:00 PM EST on 31 July 2026.

Proposal shall be valid for an additional 120 days from the closing of this amendment.

The contractor shall acknowledge this Amendment 0005 in Paragraph A.9, Acknowledgement of Amendments, of its proposal submission.

b) Update the regulation changes due to the Revolutionary FAR Overhaul (RFO) throughout the solicitation.

Section A:

a) Updated A.1.1

From: This solicitation is a total small business set-aside in accordance with FAR 19.502-2.

To: This solicitation is a total small business set-aside in accordance with RFO FAR 19.104-1.

b) Updated A.5.3

From: A.5.3 Please pay close attention to the Issued By block location on the cover page of the solicitation for closing date and time.

The closing date and time is based on the local time of the listed location of the Issued By office. In accordance with FAR

15.208(a),offerors are responsible for submitting proposals, and any revisions, and modifications, to be received by the Government office designated in the solicitation by the time specified.

To: A.5.3 Please pay close attention to the Issued By block location on the cover page of the solicitation for closing date and time.

The closing date and time is based on the local time of the listed location of the Issued By office. In accordance with RFO FAR

15.107(a),offerors are responsible for submitting proposals, and any revisions, and modifications, to be received by the Government office designated in the solicitation by the time specified.

b) Updated A.5.7

From: All questions regarding the requirements of this solicitation and applicable attachments must be submitted by May 30, 2025, 12:00

PM EST to christina.a.herbig.civ@army.mil.

To: All questions regarding the requirements of this solicitation and applicable attachments must be submitted by July 20, 2026, 12:00

PM EST to christina.a.herbig.civ@army.mil.

Section F:

Remove:

a) FAR 52.211-8 Time of Delivery

b) FAR 52.211-17 DELIVERY OF EXCESS QUANTITIES

Added:

a) Narrative F.1 Delivery and F.2 Delivery Schedule

Section I:

Updated:

a) RFO FAR 52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS (FEB 2026)

2 61

W912CH-24-R-0205

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

b) RFO FAR 52.204-13 SYSTEM FOR AWARD MANAGEMENT-MAINTENANCE (FEB 2026)

c) RFO FAR 52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, PROPOSED FOR DEBARMENT, OR VOLUNTARILY EXCLUDED (FEB 2026)

d) RFO FAR 52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING RESPONSIBILITY

MATTERS (FEB 2026)

e) RFO FAR 52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS (FEB 2026)

f) RFO FAR 52.210-1 MARKET RESEARCH( FEB 2026)

g) RFO FAR 52.211-5 MATERIAL REQUIREMENTS (FEB 2026)

h) RFO FAR 52.215-2 AUDIT AND RECORDS--NEGOTIATION (FEB 2026)

i) RFO FAR 52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (FEB 2026)

j) RFO FAR 52.215-23 LIMITATIONS ON PASS-THROUGH CHARGES (FEB 2026)

k) RFO FAR 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (FEB 2026)

l) RFO FAR 52.219-8 UTILIZATION OF SMALL BUSINESS CONCERNS (FEB 2026)

m) RFO FAR 52.219-33 NONMANUFACTURER RULE (FEB 2026)

n) RFO FAR 52.222-20 CONTRACTS FOR MATERIALS, SUPPLIES, ARTICLES, AND EQUIPMENT (FEB 2026)

o) RFO FAR 52.222-37 EMPLOYMENT REPORTS ON VETERANS (FEB 2026)

p) RFO FAR 52.222-50 COMBATING TRAFFICKING IN PERSONS ((FEB 2026)

q) RFO FAR 52.222-54 EMPLOYMENT ELIGIBILITY VERIFICATION (FEB 2026)

r) RFO FAR 52.233-1 DISPUTES (FEB 2026)

s) RFO FAR 52.233-3 PROTEST AFTER AWARD (FEB 2026)

t) RFO FAR 52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (FEB 2026)

u) RFO FAR 52.243-1 CHANGES--FIXED PRICE

v) RFO FAR 52.244-6 SUBCONTRACTS FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (APR

2026)

w) RFO FAR 52.253-1 COMPUTER GENERATED FORMS

x) RFO FAR 52.209-1 QUALIFICATION REQUIREMENTS (FEB 2026)

y) RFO FAR 52.219-14 LIMITATIONS ON SUBCONTRACTING (FEB 2026)

z) RFO FAR 52.232-16 PROGRESS PAYMENTS (FEB 2026)

1a) RFO FAR 52.219-28 POSTAWARD SMALL BUSINESS PROGRAM REPRESENTATION (FEB 2026)

1b) RFO FAR 52.222-19 CHILD LABOR--COOPERATION WITH AUTHORITIES AND REMEDIES (FEB 2026)

1c) RFO FAR 52.222-35 EQUAL OPPORTUNITY FOR VETERANS (FEB 2026)

1d) RFO FAR 52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (FEB 2026)

1e) RFO FAR 52.223-3 HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (FEB 2026)

1f) RFO FAR 52.223-11 OZONE-DEPLETING SUBSTANCES (FEB 2026)

1g) RFO FAR 52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS (APR 2026) (EXECUTIVE ORDER 14398)2026-O0040)

1h) RFO FAR 52.204-91 Contractor Identification

1i) RFO DFARS 252.225-7013 DUTY-FREE ENTRY (AUG 2025)

1j) RFO DFARS 252.204-7021 CONTRACTOR COMPLIANCE WITH THE CYBERSECURITY MATURITY MODEL

CERTIFICATION LEVEL REQUIREMENTS(NOV2025)

1k) RFO DFARS 252.227-7013 RIGHTS IN TECHNICAL DATA--OTHER THAN COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (AUG 2025)

Added:

a) RFO FAR 52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (FEB 2026)

b) RFO FAR 52.240-93 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEM (FEB 2026)

c) RFO DFARS 252.227-7989 RIGHTS IN TECHNICAL DATA, COMPUTER SOFTWARE, AND COMPUTER SOFTWARE DOCUMENTATION OTHER THAN COMMERCIAL

PRODUCTS ORCOMMERCIAL SERVICES (DEVIATION 2026-O0036) (FEB 2026)

d) RFO DFARS 252.227-7990 TECHNICAL DATA-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEVIATION (2026-O0036) (FEB 2026)

e) RFO DFARS 252.227-7991 RIGHTS IN BID OR PROPOSAL INFORMATION ((DEVIATION 2026-O0036)(FEB 2026)

f) RFO DFARS 252.227-7994 LIMITATIONS ON THE USE OR DISCLOSURE OF GOVERNMENT-FURNISHED INFORMATION MARKED WITH RESTRICTIVE LEGENDS

(DEVIATION 2026-O0036) (FEB 2026)

g) RFO DFARS 252.227-7996 TECHNICAL DATA-WITHHOLDING OF PAYMENT (DEVIATION 2026-O0036) (FEB 2026)

h) RFO DFARS 252.227-7997 Validation of Asserted Restrictions (DEVIATION 2026-O0036) (FEB 2026)

i) RFO DFARS 252.240-7997 NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS (DEVIATION 2026-O0025) (FEB 2026)

Removed:

a)52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE b)52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES DEVELOPED OR PROVIDED BY KASPERSKY LAB AND OTHER COVERED

ENTITIES (DEC 2023)

c)52.204-28 Federal Acquisition Supply Chain Security Act Orders Federal Supply Schedules, Governmentwide Acquisition Contracts, and

Multi-Agency Contracts (Dec 2023) d)52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES e)52.204-30 Federal Acquisition Supply Chain Security Act Orders Prohibition (Dec 2023)

3 61

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

f)52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS \parg)52.204-25 PROHIBITION ON CONTRACTING FOR CERTAIN

TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT

h)52.204-27 Prohibition on a ByteDance Covered Application (Jun 2023) i)252.227-7014 RIGHTS IN NONCOMMERCIAL COMPUTER SOFTWARE AND NONCOMMERCIAL COMPUTER SOFTWARE DOCUMENTATION (JAN 2025) j)252.227-7019 VALIDATION OF ASSERTED RESTRICTIONS--COMPUTER SOFTWARE (JAN 2025) k)252.227-7026 DEFERRED DELIVERY OF TECHNICAL DATA OR COMPUTER SOFTWARE l)252.227-7013 Rights in Technical Data Other than Commercial Products and Commercial Services (MAR 2023) m)252.204-7020 NIST SP 800-171 DoD Assessment Requirements (NOV 2023)

Section K:

Updated:

a) RFO FAR 52.209-7 INFORMATION REGARDING RESPONSIBILITY MATTERS

b) RFO FAR 52.209-13 VIOLATION OF ARMS CONTROL TREATIES OR AGREEMENTSCERTIFICATION

c) RFO FAR 52.252-2 CLAUSES INCORPORATED BY REFERENCE (Feb 1998) FEB/1998

d) RFO DFAR 252.204-7007 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2025)

Added:

a) RFO DFARS 252.227-7992 Identification and Assertion of Use, Release, or Disclosure Restrictions (DEVIATIONS 2026-O0036) (FEB 2026)

b) RFO FAR 52.240-90 SECURITY PROHIBITIONS AND EXCLUSIONS REPRESENTATIONS AND CERTIFICATIONS

Removed:

a)52.204-29 Federal Acquisition Supply Chain Security Act Orders-Representation and Disclosures (Dec 2023) b)52.225-20 PROHIBITION ON CONDUCTING RESTRICTED BUSINESS OPERATIONS IN SUDAN--CERTIFICATION c)52.225-25 PROHIBITION ON CONTRACTING WITH ENTITIES ENGAGING IN SANCTIONED ACTIVITIES RELATING TO IRAN--REPRESENTATION AND

CERTIFICATION

d)52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT e)52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2025) (DEVIATION 2025--O0003) and (DEVIATION 2025-O00004)

Section L:

Updated:

a) RFO FAR 52.204-7 SYSTEM FOR AWARD MANAGEMENT-REGISTRATION (FEB2026)

b) RFO FAR 52.215-1 INSTRUCTIONS TO OFFERORS--COMPETITIVE ACQUISITION (FEB 2026)

c) RFO FAR 52.216-1 TYPE OF CONTRACT (FEB 2026)

d) RFO FAR 52.233-2 SERVICE OF PROTEST (FEB2026)

e) In L.3.2.1 updated the references to FAR 15.403-5(a)(1) to RFO FAR 15.403-4(a)(1) and replace DFARS 252.215-7008 to RFO DFARS 252.215-

7992.

f) In L.2.2.1.6 updated reference FAR 15.207(c) to RFO FAR 15.108(c).

g) Changed all 52.211-8 references to F.2 Delivery Schedule.

h) Changed L.1.2.1

From: The Government specified minimum acceptance period is 180 calendar days.

To: The Government specified minimum acceptance period is 120 calendar days.

i) Updated L.3.2.1

From: In accordance with FAR 15.403-4(a)(1), certified cost or pricing data is not required for initial proposal submission. However, after initial proposal submission, if only one offer is received, the Government reserves the right to request certified cost or pricing data in accordance with DFARS 252.215-7992. In the event certified cost or pricing data is required, the offeror may submit a written request for exception based on the applicable clauses contained herein.

To: In accordance with RFO FAR 15.403-2(b)(1), certified cost or pricing data is not required for initial proposal submission. However, after initial proposal submission, if only one offer is received, the Government reserves the right to request certified cost or pricing data in accordance with RFO DFARS 252.215-7992 (DEVIATION 2026-O0048). In the event certified cost or pricing data is required, the offeror may submit a written request for exception based on the applicable clauses contained herein.

Added:

a) RFO FAR 52.215-22 Limitations on Pass-Through Charges Identification of Subcontract Effort (FEB 2026)

b) RFO DFARS 252.215-7992 ONLY ONE OFFER (DEVIATION 2026-O0048) (MAR 2026)

Removed:

a)52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING

4 61

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

b)52.204-22 ALTERNATIVE LINE ITEM PROPOSAL c)52.211-1 AVAILABILITY OF SPECIFICATIONS LISTED IN THE GSA INDEX OF FEDERAL

SPECIFICATIONS, STANDARDS AND COMMERCIAL ITEM DESCRIPTIONS, FPMR PART 101-29 (Sep 2023) d)52.211-2 Availability of Defense Specifications, Standards, and Data Item

Descriptions in the Acquisition Streamlining and Standardization Information System (ASSIST) Website (Sep 2023) e)252.204-7019 NOTICE OF NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS

Section M:

Replace:

a) Replacement of all references to FAR 52.211-8, Time of Delivery to F.2 Delivery Schedule.

b) Replacement of all references to Discussions in Section M to Negotiations.

Updated:

a) RFO FAR 52.217-5 EVALUATION OF OPTIONS (FEB 2026)

b) Updated

From: M.1.1 The Government will only award a contract to an offeror that meets all the responsibility criteria at FAR 9.104.

M.1.2 To make sure that an offeror meets the responsibility criteria at FAR 9.104 the Government may:

To: M.1.1 The Government will only award a contract to an offeror that meets all the responsibility criteria at RFO FAR 9.104.

M.1.2 To make sure that an offeror meets the responsibility criteria at RFO FAR 9.104 the Government may:

c) M.4.3 Award without Negotiations. This RFP includes RFO FAR Provision 52.215-1 Instructions to Offerors Competitive Acquisition in

Section L which advises offerors that the Government intends to make award without conducting Negotiations. Where awards will be made without Negotiations, exchanges with offerors are limited to Clarifications as defined in RFO FAR 15.202(a)(2).

Therefore, the offerors initial proposal should contain the offerors best terms from a Price and non-Price Factor standpoint. However, under RFO FAR 52.215-1(f)(4), the Government reserves the right to hold Negotiations, if necessary. If the Contracting Officer determines that the number of proposals that would otherwise be in the competitive range exceeds the number at which an efficient competition can be conducted, the Contracting Officer may limit the number of proposals in the competitive range to the greatest number that will permit an efficient competition among the most highly rated proposals.

d) M.5.1.3, Delivery Schedule Subfactor Adjective Ratings & Descriptions:

OUTSTANDING - Proposal provides a delivery schedule that is sooner than the solicited schedule with FAT for the respective CLIN in

Section F.2 Delivery Schedule.

ACCEPTABLE - Proposal provides a delivery schedule that is equal to the solicited schedule with FAT for the respective CLIN in Section

F.2 Delivery Schedule.

MARGINAL - Proposal provides a delivery schedule that is later than the solicited schedule for the respective CLIN in Section F.2

Delivery Schedule by 45 days or less.

UNACCEPTABLE - Proposal provides a delivery schedule that is later than the solicited schedule for the respective CLIN in Section F.2

Delivery Schedule by more than 45 days. Proposal is un-awardable.

e) M.5.2.1.1 to: The unit price for each separately priced CLIN, will be multiplied by the estimated quantity for the corresponding CLIN and the results added together to produce the overall price; plus M.5.2.1.2 Any downward adjustment(s) based on USG approval of FAT waiver(s) in accordance with Section M.6.2.

f)Update

From: M.5.2.2 Price Reasonableness: The Government will evaluate whether the offeror's proposed price is reasonable. A price is reasonable if, in its nature and amount, it does not exceed that which would be incurred by a prudent person in the conduct of competitive business.

The Government may decide of price reasonableness by any means allowable under FAR 15.404-1.

To: M.5.2.2 Price Reasonableness: The Government will evaluate whether the offeror's proposed price is reasonable. A price is reasonable if, in its nature and amount, it does not exceed that which would be incurred by a prudent person in the conduct of competitive business.

The Government may decide of price reasonableness by any means allowable under RFO FAR 15.404-1.

g) Update M.5.2.3

From: Unbalanced Pricing: The Government will evaluate the Offeror's proposal for unbalanced pricing. Unbalanced pricing exists when, despite an acceptable total evaluated price, the price of one or more contract line items is significantly over- or understated as indicated by the application of cost and price analysis techniques. Offerors are cautioned that a proposal the Government assesses to be

5 61

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

unbalanced as to price, may either be rejected or determined unacceptable for award. See FAR 15.404-1(g) for more information on unbalanced pricing.

To: M.5.2.3 Unbalanced Pricing: The Government will evaluate the Offeror's proposal for unbalanced pricing. Unbalanced pricing exists when, despite an acceptable total evaluated price, the price of one or more contract line items is significantly over- or understated as indicated by the application of cost and price analysis techniques. Offerors are cautioned that a proposal the Government assesses to be unbalanced as to price, may either be rejected or determined unacceptable for award. See RFO FAR 15.404-6 for more information on unbalanced pricing.

h) Update M.6.1

From: M.6.1 Per FAR 17.203(d), offerors may price the option CLIN in this solicitation incrementally, by entering different option unit prices that will apply to different sub quantities or quantity ranges (if the Government elects to exercise less than 100% of the option).

Notwithstanding this fact, the provision entitled EVALUATION OF OPTIONS (FAR 52.217-5, located elsewhere in this Section M) indicates that the Government's evaluation for contract award will include each offeror's price for 100% of the option quantity.

To: M.6.1 Per RFO FAR 17.203(d), offerors may price the option CLIN in this solicitation incrementally, by entering different option unit prices that will apply to different sub quantities or quantity ranges (if the Government elects to exercise less than 100% of the option).

Notwithstanding this fact, the provision entitled EVALUATION OF OPTIONS (RFO FAR 52.217-5, located elsewhere in this Section M) indicates that the Government's evaluation for contract award will include each offeror's price for 100% of the option quantity.

i) Update M.7.1

From: M.7.1 If the offeror submits a request for waiver of First Article Testing but fails to comply with the requirements of paragraph

L.__ PROVISION FOR WAIVER, the requested waiver may not be granted. If the waiver is not granted, more favorable alternative offers of price or delivery, conditioned upon the granting of a waiver, will not be considered in the evaluation process.

To: M.7.1 If the offeror submits a request for waiver of First Article Testing but fails to comply with the requirements of paragraph

L.6 PROVISION FOR WAIVER, the requested waiver may not be granted. If the waiver is not granted, more favorable alternative offers of price, conditioned upon the granting of a waiver, will not be considered in the evaluation process.

Under no circumstances will credit for a granted FAT waiver be applied towards an offeror's delivery schedule.

li22. **Offerors are advised that all FAR and DFARS citations throughout this solicitation reference the structures and language established by the Revolutionary FAR Overhaul (RFO).

This solicitation incorporates the streamlined parts, plain-language revisions, and agency-specific class deviations implemented under this comprehensive overhaul initiative. **

3. Amendment 0004 was not utilized.

4. All other terms and conditions, except for those addressed above, remain unchanged and are in full force and effect.

*** END OF NARRATIVE A0005 ***

A.1 DESCRIPTION OF THE ACTION

This solicitation is intended to result in the award of a single, firm-fixed price (FFP) contract with a 100% option for the supplies specified.

A.1.1 This solicitation is a total small business set-aside in accordance with FAR 19.104-1.

A.1.2 There is a Technical Data Package (TDP) associated with this procurement. The TDP is Distribution Statement D, which limits access to Department of Defense (DoD) and U.S. DoD contractors only. Please refer to Section C.1 for additional information.

A.2 EVALUATION FACTORS FOR AWARD

6 61

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Offerors are encouraged to review Section M of this solicitation for evaluation factors and basis for award.

A.3 SOLICITATION STRUCTURE

The Government will utilize North American Industry Classification System (NAICS) code 336390 (Other motor vehicle parts manufacturing).

This NAICS code will also be assigned to subsequent awarded delivery orders thereunder.

A.4 System for Award Management (SAM), Size Standards, and NAICS Codes

Failure to register in SAM for the corresponding NAICS code identified in paragraph A.3 prior to submitting a proposal against this solicitation may preclude an award being made to your company. Offerors should be aware of how U.S. Small Business (SB) concerns are defined in RFO FAR Part 19, Defense Federal Acquisition Regulation Supplement (DFARS) Part 19, and 13 CFR 121, Small Business Size

Regulations. Offerors are advised to review 13 CFR 121.103, "How does SBA Determine Affiliation".

A.5 Electronic Contracting

A.5.1 All Army Contracting Command Detroit Arsenal solicitations will be publicized on the System for Award Management website

(https://www.sam.gov). Any additional attachments, including Technical Data Packages (TDPs) when available electronically, will be separate attachments or links embedded in the solicitation.

A.5.2 Interested offerors shall submit a proposal via email to the Contract Specialist (Christina.A.Herbig.civ@army.mil) and cc the corresponding Contracting Officer (amy.m.dombrowski.civ@army.mil) with the subject header:

Proposal Submission - W912CH-24-R-0205 (company name).

Once a proposal is received, the Contract Specialist/Contracting Officer will reply with the respective Offeror stating receipt of proposal submission.

A.5.3 Please pay close attention to the Issued By block location on the cover page of the solicitation for closing date and time. The closing date and time is based on the local time of the listed location of the Issued By office. In accordance with RFO FAR

15.107(a),offerors are responsible for submitting proposals, and any revisions, and modifications, to be received by the Government office designated in the solicitation by the time specified.

Note: There is no "expected" or "target" length of time for proposal submission; size and content may be factors, therefore offerors are strongly cautioned when submitting proposals to allow adequate time for submission.

A.5.4 Solicitations may remain posted on www.SAM.gov after the solicitation closing date.

A.5.5 Any award issued as a result of this solicitation will be distributed electronically. In the event of a FOIA request for a copy of any award issued as a result of this solicitation, or any subsequent modifications to the contract, the contract and modifications will be released, including the awarded unit price. This is the notice required by Executive Order 12600 (June 23, 1987) of the Governments intention to release unit prices in response to any request under the Freedom of Information Act (FOIA), 5 USC 552. Unit price is defined as the contract price per unit or item purchased as it appears in Section B of the contract and is NOT referring to nor does it include Cost or Pricing data/information. If an Offeror objects to such release in the base contract or contract modifications, the

Offeror must notify the contracting officer in writing prior to the closing date identified in this solicitation and include the rationale for the objection consistent with the provisions of FOIA. A release determination will be made based on rationale given.

A.5.6 Questions pertaining to this solicitation should be directed to the Contract Specialist identified on the cover page of this solicitation. For technical assistance in doing business with the Government, and doing business electronically, please visit the

Procurement Technical Assistance Center (PTAC) website at http://www.aptac-us.org/ to locate a regional center.

A.5.7 All questions regarding the requirements of this solicitation and applicable attachments must be submitted by 20 July, 2026, 12:00

PM EST to christina.a.herbig.civ@army.mil. The Government shall review all questions received but is not obligated to answer questions submitted after the date noted above prior to the solicitation close date.

A.6 DISTRIBUTION AND DESTRUCTION OF EXPORT CONTROL TECHNICAL DATA PACKAGE

A.6.1 This solicitation and resulting contract contains technical data whose export is restricted by the Army Export Control Act

(section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 48014852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provision of DoD Directive 5230.25 and DoD Instruction 2040.02. This also applies to distribution of the TDP to all SUBCONTRACTORS at every level.

A.6.2 To be eligible to gain access to this export controlled TDP (via SAM.gov) an offeror must have a current DD 2345, Militarily

Critical Technical Data Agreement certification on file with the Defense Logistics Information Service (DLIS). To obtain certification, contractors must submit a DD Form 2345 to the United States (U.S.)/Canada Joint Certification Office (JCO), along with a copy of supporting documentation. DD Form 2345 and instructions can be found on the Joint Certification Program website at:

http://www.dla.mil/HQ/InformationOperations/Offers/Products/LogisticsApplications/JCP.aspx Processing time is estimated at six

7 61

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(6) to ten (10) weeks after receipt. Upon receipt of certification, an offeror may request the TDP in accordance with the solicitation's Section C Technical Data Package instructions.

A.6.3 Upon completion of the purposes for which Government Technical Data has been provided, the offeror, and all subcontractors, vendors, and sub-vendors of the offeror, are required to destroy all documents, including all reproductions, duplications, or copies thereof as may have been further distributed.

A.6.4 Destruction of this technical data shall be accomplished by: shredding, pulping, burning, or melting any physical copies of the

TDP and/or deletion or removal of downloaded TDP files from computer drives and electronic devices, and any copies of those files.

A.7 ARMY CONTRACTING COMMAND DETROIT ARSENAL (DTA) OMBUDSPERSON

Information regarding the Ombudsperson for this contract is located at the following website: https://www.tacom.army.mil/ombudsperson .

(Best viewed using Google Chrome or Microsoft Edge)

A.8 ALL OR NONE

Offers in response to this solicitation must be submitted for the total quantity of the items identified in the solicitation.

A.8.1 ONLY ONE AWARD WILL BE MADE AS A RESULT OF THIS SOLICITATION.

A.8.2 OFFERS SUBMITTED FOR LESS THAN THE TOTAL QUANTITIES OF ALL THE ITEMS IN THIS SOLICITATION WILL BE DEEMED NONRESPONSIVE.

A.9 ACKNOWLEDGEMENT OF AMENDMENTS

Acknowledge all the amendments received from the Government by identifying the amendment number and its issue date below:

Amendment Number: Date:

*** END OF NARRATIVE A0001 ***

8 61

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION F - DELIVERIES OR PERFORMANCE

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

F-1 DELETED 52.211-17 DELIVERY OF EXCESS QUANTITIES SEP/1989

F-2 DELETED 52.211-8 TIME OF DELIVERY JUN/1997

F.1 Delivery

For the purpose of offerors compiling FOB Destination offers, the final destination for the supplies will be one or more of the following destinations; in the following estimated percentages, if listed: 100% to Anniston, AL.

F.2 DELIVERY SCHEDULE

F.2.1 Delivery under this contract must conform to the required schedule specified below, unless no-cost acceleration is acceptable.

F.2.2 DEFINITIONS:

F.2.2.1 DAYS means the number of days after the date of contract award when you must deliver the stated quantity (QTY) of supplies.

F.2.2.2 DELIVERY is defined as follows:

F.2.2.3 DAC (Days After Contract).

FOB Destination - Contractor is required to deliver its shipment as provided in FAR 52.247-34(a)(1)-(2) by the time specified in the individual contract. The contractor must take into consideration the length of time necessary to deliver its shipment to the destination designated in the contract, to ensure that the item reaches its destination by the time reflected in the contract.

F.2.3 The Government requires deliveries according to the following schedule:

F.2.3.1 GOVERNMENT SOLICITED DELIVERY SCHEDULE: CLIN(s) 0001AA-0002AA

F.2.3.1.1 Start deliveries 300 DAC; or FAT Approval, whichever is later.

F.2.3.2 GOVERNMENT SOLICITED DELIVERY SCHEDULE: CLIN 0003AA

F.2.3.2.1 Delivery is 330 days after award.

F.2.3.2.2 *CLIN 0003AA: Offerors may not propose an alternative Delivery Schedule for this CLIN.

F.2.4 Accelerated delivery schedule is acceptable for CLINs 0001AA-0002AA.

F.2.5 The offeror may propose an alternative delivery schedule for CLINs 0001AA-0002AA; fill in the appropriate information here:

F.2.6 Contractor Proposed Accelerated Delivery Schedule

F.2.6.1 Start deliveries___ DAC; or FAT Approval, whichever is later.

F.2.6.1.1 Any acceleration in F.2.6.1 will be subtracted from F.2.3.2.1 at award.

*** END OF NARRATIVE F0001 ***

9 61

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION I - CONTRACT CLAUSES

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

I-1 CHANGED 52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS FEB/2026

(FEB 2026)

I-2 CHANGED 52.204-13 SYSTEM FOR AWARD MANAGEMENT-MAINTENANCE (FEB 2026) FEB/2026

I-3 DELETED 52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE AUG/2020

I-4 DELETED 52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES DEC/2023

DEVELOPED OR PROVIDED BY KASPERSKY LAB AND OTHER COVERED ENTITIES

(DEC 2023)

I-5 DELETED 52.204-28 Federal Acquisition Supply Chain Security Act Orders?Federal Supply DEC/2023

Schedules, Governmentwide Acquisition Contracts, and Multi-Agency

Contracts (Dec 2023)

I-6 ADDED 52.204-91 CONTRACTOR IDENTIFICATION (FEB 2026) FEB/2026

I-7 CHANGED 52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH FEB/2026

CONTRACTORS DEBARRED, SUSPENDED, PROPOSED FOR DEBARMENT, OR

VOLUNTARILY EXCLUDED (FEB 2026)

I-8 CHANGED 52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING RESPONSIBILITY FEB/2026

MATTERS (FEB 2026)

I-9 CHANGED 52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS (FEB FEB/2026

2026)

I-10 CHANGED 52.210-1 MARKET RESEARCH( FEB 2026) FEB/2026

I-11 CHANGED 52.211-5 MATERIAL REQUIREMENTS (FEB 2026) FEB/2026

I-12 CHANGED 52.215-2 AUDIT AND RECORDS--NEGOTIATION (FEB 2026) FEB/2026

I-13 CHANGED 52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (FEB 2026) FEB/2026

I-14 CHANGED 52.215-23 LIMITATIONS ON PASS-THROUGH CHARGES (FEB 2026) FEB/2026

I-15 CHANGED 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (FEB 2026) FEB/2026

I-16 CHANGED 52.219-8 UTILIZATION OF SMALL BUSINESS CONCERNS (FEB 2026) FEB/2026

I-17 CHANGED 52.219-33 NONMANUFACTURER RULE (FEB 2026) FEB/2026

I-18 CHANGED 52.222-20 CONTRACTS FOR MATERIALS, SUPPLIES, ARTICLES, AND EQUIPMENT (FEB 2026) FEB/2026

I-19 CHANGED 52.222-37 EMPLOYMENT REPORTS ON VETERANS (FEB 2026) FEB/2026

I-20 CHANGED 52.222-50 COMBATING TRAFFICKING IN PERSONS ((FEB 2026) FEB/2026

I-21 CHANGED 52.222-54 EMPLOYMENT ELIGIBILITY VERIFICATION (FEB 2026) FEB/2026

I-22 ADDED 52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS(APR2026) APR/2026

I-23 DELETED 52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES FEB/2021

I-24 CHANGED 52.233-1 DISPUTES (FEB 2026) FEB/2026

I-25 CHANGED 52.233-3 PROTEST AFTER AWARD (FEB 2026) FEB/2026

I-26 CHANGED 52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (FEB 2026) FEB/2026

I-27 ADDED 52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (FEB 2026) FEB/2026

I-28 CHANGED 52.243-1 CHANGES--FIXED PRICE FEB/2026

I-29 CHANGED 52.244-6 SUBCONTRACTS FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (APR APR/2026

2026)

I-30 CHANGED 52.253-1 COMPUTER GENERATED FORMS FEB/2026

I-31 CHANGED 252.204-7021 CONTRACTOR COMPLIANCE WITH THE CYBERSECURITY MATURITY MODEL JAN/2023

CERTIFICATION LEVEL REQUIREMENTS(NOV2025)

I-32 DELETED 252.227-7014 RIGHTS IN NONCOMMERCIAL COMPUTER SOFTWARE AND NONCOMMERCIAL COMPUTER JAN/2025

SOFTWARE DOCUMENTATION(JAN 2025)

I-33 DELETED 252.227-7019 VALIDATION OF ASSERTED RESTRICTIONS--COMPUTER SOFTWARE (JAN 2025) JAN/2025

I-34 DELETED 252.227-7026 DEFERRED DELIVERY OF TECHNICAL DATA OR COMPUTER SOFTWARE APR/1988

I-35 DELETED 52.204-30 Federal Acquisition Supply Chain Security Act Orders?Prohibition (Dec DEC/2023

2023)

I-36 CHANGED 52.209-1 QUALIFICATION REQUIREMENTS (FEB 2026) FEB/2026

(a) Definition. "Qualification requirement," as used in this clause, means a Government requirement for testing or other quality assurance demonstration that must be completed before award.

(b) One or more qualification requirements apply to the supplies or services covered by this contract. For those supplies or services requiring qualification, whether the covered product or service is an end item under this contract or simply a component of an end item, the product, manufacturer, or source must have demonstrated that it meets the standards prescribed for qualification before award of this contract. The product, manufacturer, or source must be qualified at the time of award whether or not the name of the product, manufacturer, or source is actually included on a qualified products list, qualified manufacturers list, or qualified bidders list.

Offerors should contact the agency activity designated below to obtain all requirements that they or their products or services, or their subcontractors or their products or services, must satisfy to become qualified and to arrange for an opportunity to demonstrate

10 61

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

their abilities to meet the standards specified for qualification.

(Name)_____________________________________________________________

(Address)__________________________________________________________

(c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided.

Offeror's Name

Manufacturer's Name

Source's Name

Item Name

Service Identification

Test Number (to the extent known)

(d) Even though a product or service subject to a qualification requirement is not itself an end item under this contract, the product, manufacturer, or source must nevertheless be qualified at the time of award of this contract. This is necessary whether the Contractor or a subcontractor will ultimately provide the product or service in question. If, after award, the Contracting Officer discovers that an applicable qualification requirement was not in fact met at the time of award, the Contracting Officer may either terminate this contract for default or allow performance to continue if adequate consideration is offered and the action is determined to be otherwise in the Government's best interests.

(e) If an offeror, manufacturer, source, product or service has met the qualification requirement but is not yet on a qualified products list, qualified manufacturers list, or qualified bidders list, the offeror must submit evidence of qualification prior to award of this contract. Unless determined to be in the Government's interest, award of this contract will not be delayed to permit an offeror to submit evidence of qualification.

(f) Any change in location or ownership of the plant where a previously qualified product or service was manufactured or performed requires reevaluation of the qualification. Similarly, any change in location or ownership of a previously qualified manufacturer or source requires reevaluation of the qualification. The reevaluation must be accomplished before the date of award.

(End of Clause)

I-37 CHANGED 52.219-14 LIMITATIONS ON SUBCONTRACTING (FEB 2026) FEB/2026

(a) This clause does not apply to the unrestricted portion of a partial set-aside.

(b) Definition. Similarly situated entity, as used in this clause, means a first-tier subcontractor, including an independent contractor, that

(1) Has the same small business program status as that which qualified the prime contractor for the award (e.g., for a small business set-aside contract, any small business concern, without regard to its socioeconomic status); and

(2) Is considered small for the size standard under the North American Industry Classification System (NAICS) code the prime contractor assigned to the subcontract.

(c) Applicability. This clause applies only to

(1) Contracts that have been set aside for any of the small business concerns identified in 19.000(a)(3);

(2) Part or parts of a multiple-award contract that have been set aside for any of the small business concerns identified in

19.000(a)(3);

(3) Contracts that have been awarded on a sole-source basis in accordance with sections 19.105, 19.106, 19.107, and 19.108;

11 61

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(4) Orders expected to exceed the simplified acquisition threshold and that are set aside for small business concerns under multiple-award contracts, as described in 8.4 and 16.5;

(5) Orders, regardless of dollar value, that are set aside in accordance with sections 19.105, 19.106, 19.107, and 19.108 under multiple-award contracts, as described in 8.4 and 16.5; and

(6) Contracts using the HUBZone price evaluation preference to award to a HUBZone small business concern unless the concern waived the evaluation preference.

(d) Independent contractors. An independent contractor shall be considered a subcontractor.

(e) By submission of an offer and execution of a contract, the Contractor agrees that in performance of a contract assigned a North

American Industry Classification System (NAICS) code for

(1) Services (except construction), it will not pay more than 50 percent of the amount paid by the Government for contract performance to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract;

(2) Supplies (other than procurement from a nonmanufacturer of such supplies), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities.

Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract;

(3) General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 85 percent subcontract amount that cannot be exceeded; or

(4) Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 75 percent subcontract amount that cannot be exceeded.

(f) The Contractor shall comply with the limitations on subcontracting as follows:

(1) For contracts, in accordance with paragraphs (c)(1), (2), (3) and (6) of this clause

[___] By the end of the base term of the contract and then by the end of each subsequent option period; or

[___] By the end of the performance period for each order issued under the contract.

(2) For orders, in accordance with paragraphs (c)(4) and (5) of this clause, by the end of the performance period for the order.

(g) A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (e) of this clause will be performed by the aggregate of the joint venture participants.

(1) In a joint venture comprised of a small business protege and its mentor approved by the Small Business Administration, the small business protege shall perform at least 40 percent of the work performed by the joint venture. Work performed by the small business protege in the joint venture must be more than administrative functions.

(2) In an 8(a) joint venture, the 8(a) participant(s) shall perform at least 40 percent of the work performed by the joint venture. Work performed by the 8(a) participants in the joint venture must be more than administrative functions..

(End of clause)

I-38 CHANGED 52.232-16 PROGRESS PAYMENTS (FEB 2026) FEB/2026

12 61

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

The Government will make progress payments to the Contractor when requested as work progresses, but not more frequently than monthly, in amounts of $2,500 or more approved by the Contracting Officer, under the following conditions:

(a) Computation of amounts.(1) Unless the Contractor requests a smaller amount, the Government will compute each progress payment as 80 percent of the Contractor's total costs incurred under this contract whether or not actually paid, plus financing payments to subcontractors (see paragraph (j) of this clause), less the sum of all previous progress payments made by the Government under this contract. The Contracting Officer will consider cost of money that would be allowable under Federal Acquisition Regulation (FAR) 31.205-

10 as an incurred cost for progress payment purposes.

(2) The amount of financing and other payments for supplies and services purchased directly for the contract are limited to the amounts that have been paid by cash, check, or other forms of payment, or that are determined due and will be paid to subcontractors

(i) In accordance with the terms and conditions of a subcontract or invoice; and

(ii) Ordinarily within 30 days of the submission of the Contractor's payment request to the Government.

(3) The Government will exclude accrued costs of Contractor contributions under employee pension plans until actually paid unless

(i) The Contractor's practice is to make contributions to the retirement fund quarterly or more frequently; and

(ii) The contribution does not remain unpaid 30 days after the end of the applicable quarter or shorter payment period (any contribution remaining unpaid shall be excluded from the Contractor's total costs for progress payments until paid).

(4) The Contractor shall not include the following in total costs for progress payment purposes in paragraph (a)(1) of this clause:

(i) Costs that are not reasonable, allocable to this contract, and consistent with sound and generally accepted accounting principles and practices.

(ii) Costs incurred by subcontractors or suppliers.

(iii) Costs ordinarily capitalized and subject to depreciation or amortization except for the properly depreciated or amortized portion of such costs.

(iv) Payments made or amounts payable to subcontractors or suppliers, except for

(A) Completed work, including partial deliveries, to which the Contractor has acquired title; and

(B) Work under cost-reimbursement or time-and-material subcontracts to which the Contractor has acquired title.

(5) The amount of unliquidated progress payments may exceed neither (i) the progress payments made against incomplete work (including allowable unliquidated progress payments to subcontractors) nor (ii) the value, for progress payment purposes, of the incomplete work.

Incomplete work shall be considered to be the supplies and services required by this contract, for which delivery and invoicing by the

Contractor and acceptance by the Government are incomplete.

(6) The total amount of progress payments shall not exceed 80 percent of the total contract price.

(7) If a progress payment or the unliquidated progress payments exceed the amounts permitted by subparagraphs (a)(4) or (a)(5) of this clause, the Contractor shall repay the amount of such excess to the Government on demand.

(8) Notwithstanding any other terms of the contract, the Contractor agrees not to request progress payments in dollar amounts of less than $2,500. The Contracting Officer may make exceptions.

(9) The costs applicable to items delivered, invoiced, and accepted shall not include costs in excess of the contract price of the items.

(b) Liquidation. Except as provided in the Termination for Convenience of the Government clause, all progress payments shall be liquidated by deducting from any payment under this contract, other than advance or progress payments, the unliquidated progress payments, or 80 percent of the amount invoiced, whichever is less. The Contractor shall repay to the Government any amounts required by a retroactive price reduction, after computing liquidations and payments on past invoices at the reduced prices and adjusting the unliquidated progress payments accordingly. The Government reserves the right to unilaterally change from the ordinary liquidation rate to an alternate rate when deemed appropriate for proper contract financing.

(c) Reduction or suspension. The Contracting Officer may reduce or suspend progress payments, increase the rate of liquidation, or take a combination of these actions, after finding on substantial evidence any of the following conditions:

(1) The Contractor failed to comply with any material requirement of this contract (which includes paragraphs (f) and (g) of this

13 61

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

clause).

(2) Performance of this contract is endangered by the Contractor's (i) failure to make progress or (ii) unsatisfactory financial condition.

(3) Inventory allocated to this contract substantially exceeds reasonable requirements.

(4) The Contractor is delinquent in payment of the costs of performing this contract in the ordinary course of business.

(5) The fair value of the undelivered work is less than the amount of unliquidated progress payments for that work.

(6) The Contractor is realizing less profit than that reflected in the establishment of any alternate liquidation rate in paragraph (b) of this clause, and that rate is less than the progress payment rate stated in subparagraph (a)(1) of this clause.

(d) Title.

(1) Title to the property described in this paragraph (d) shall vest in the Government. Vestiture shall be immediately upon the date of this contract, for property acquired or produced before that date. Otherwise, vestiture shall occur when the property is or should have been allocable or properly chargeable to this contract.

(2) Property, as used in this clause, includes all of the below-described items acquired or produced by the Contractor that are or should be allocable or properly chargeable to this contract under sound and generally accepted accounting principles and practices.

(i) Parts, materials, inventories, and work in process;

(ii) Special…