BIM File Instructions.pdf
PDF 45 KB Posted
- Solicitation number
- W9128F-19-B-0008
About this file
This solicitation package provides details for the renovation of the Wing Command Post 90 at Malmstrom Air Force Base in Montana. The project involves renovating approximately two-thirds of an existing building's basement for a total area of 11,468 square feet. Scope of work includes removing an existing concrete floor slab, lowering the elevation, and pouring a new slab. Interior demolition, new construction of walls, restrooms, finishes and associated utilities are also within scope. The solicitation will be issued on September 20, 2019 and close on October 20, 2019. This opportunity is set aside exclusively for small businesses. The estimated cost range is between $1,000,000 and $5,000,000. The contractor must commence work within 10 days of notice to proceed and complete the project within 365 calendar days. Performance and payment bonds are required. Questions should be directed to the specified contracting specialist by the stated deadline.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 19B0008 (OF 1419A) Page 3.pdf | ||
| 19B0008 (OF 1419A) Page 2.pdf | ||
| 19B0008 (OF 1419).pdf | ||
| Am_0004.pdf | ||
| Am_0003.pdf | ||
| Am_0003-Drawings.pdf | ||
| Am_0002.pdf | ||
| Am_0001.pdf | ||
| W9128F19B0008-Drawings.PDF | ||
| W9128F19B0008-Specs.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CAD/BIM files developed for the RFP can be obtained for use in preparation of the design by contacting the following:
William Rawe, william.t.rawe@usace.army.mil
A response will be provided Monday to Friday, 7:00 A.M. – 3:00 P.M. MST.
The request for CAD/BIM files must contain an email address where the files are to be sent. The Government will then send the files through a file transfer website. The system will generate an email with instructions on how to download them.
Disclaimer
The files contained herein were used to compile design documents for the subject project. The subject files are being provided for information only to prospective bidders and are provided on an AS-IS basis.
Files are provided in either .dgn, .dwg, or .RVT format, depending upon the nature of the work communicated. Please note that the Government does not warrant consistency or accuracy of the files in relation to the electronic .PDF files that serve as the basis for bidding the work. Use of the design model(s) shall not limit compliance with As-Built requirements in this contract. Utilization of these files shall not limit compliance with any portions or requirements of the .PDF design drawings or specifications.
mailto:william.t.rawe@usace.army.mil mailto:william.t.rawe@usace.army.mil
File details come from the government source that posted it. Updated .