200514_JBSA-FSH B16 S Wing CID.pdf

“FOR OFFICIAL USE ONLY”

COMPREHENSIVE INTERIOR DESIGN PACKAGE

CORRECTED FINAL SUBMITTAL

RENOVATION OF BUILDING 16 – SOUTH WING

JOINT BASE SAN ANTONIO -FORT SAM HOUSTON, TX

OCTOBER 2019

W9126G20B0049-0004

RENOVATION OF BUILDING 16 – SOUTH WING CORRECTED FINAL SUBMITTAL

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS OCTOBER 2019

KENALL + FNI / SLA HOUSTON, TX / WICHITA FALLS, TX

TABLE OF CONTENTS

Renovation of Building 16 - Fort Sam Houston

TAB I

Interior Design Analysis / Narrative of Interior Design Objectives

TAB II

Item Tag Legend

TAB III

Manufacturers’ Summary List

TAB IV

Furniture Floor Plans

TAB V

Furniture Illustration Sheets

TAB VI

Color Boards & Finish Codes

TAB VII

Finish Floor Plans

TAB l Interior Design Analysis / Narrative of Interior Design Objectives

1. General Description.

1.1. The interior design portion of this project will be limited to the interior renovations of building 16 at

JBSA Fort Sam Houston. No exterior finishes will be modified as part of this project.

1.2. Interior Design services include both the Structural Interior Design (SID) Package and the preparation of a Fixtures, Furniture, and Equipment (FF&E) Package, constituting a Comprehensive Interior Design (CID)

Package.

1.3. The SID consists of the design, selection, specification and coordination of interior finish materials including walls, floors, ceilings, trims, doors, windows, window treatments, signage, and built-in furnishings. The SID also provides basic space planning in anticipation for FF&E requirements, as well as keeping with the functional layout of the building while keeping in mind life safety, privacy and accessibility.

1.4. The FF&E consists of the design, selection, specification, color coordination, and preparation of procurement documentation of the required items necessary for each building. The FF&E furnishings will be coordinated with the SID interior finish materials.

2. Criteria References.

2.1. Request for Proposal (RFP); Contract No. W9126G-17-D-0017

2.2. JBSA Fort Sam Houston Installation Design Guide

3. Design Criteria.

3.1. Space Allocations: Spaces designated in the floorplan have been designed to efficiently allow for the program required by the user. A program summarization is provided in Chapter 3.

3.2. Internal Activities: N/A

4. Basic Analysis.

4.1. Functional Evaluation.

4.2.1. Historical Preservation: Though building 16 is a historical building, the interior has been modified greatly throughout the life of the building. Thus the historical significance is limited to the building exterior, which will be maintained with this renovation.

4.2.2. Arrangement of Basic Components: The AE provided 15% Conceptual Design documents for review by the Government followed by a full design charrette. The current design represents an arrangement of spaces indicating a conference area, private office, open office area, and auxiliary spaces that have been vetted by the User.

4.2.3. The layout of the spaces in the Scope of Work have been designed to maximize efficiency and minimize circulation space in order to accommodate the required program of spaces.

4.2.4. Support spaces as required by the program of spaces will be designed and constructed in a manner to provide minimal impact on the floorplan, while also meeting the needs of the user.

4.2.5. Program of spaces is provided in Chapter 3 – Architectural, of this narrative.

4.2.6. Basis of design:

4.1.1.1 First Floor: First floor interior design will use the museum, located in the east wing, as a precedent for selecting finishes.

4.1.1.2 Second Floor: Second floor interior design will use the Texas Room, located in the east end of the second floor, as a precedent for selecting finishes.

4.2. Environmental Response.

4.2.1. Design Basis: It is the goal of the Interior Designer to provide harmony between capturing historical significance with the necessary durability and maintainability.

4.2.2. Existing windows will provide natural light to all occupied spaces.

4.3. Economic Justification: Interior finishes will be selected to provide durable and low maintenance products that will extend the life of the space and minimize downtime for upkeep.

TAB ll Item Tag Legend

RENOVATION OF BUILDING 16 SOUTH WING

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

Tag

AC-01 Lead Line 3 High Lateral File - 36"w

AC-02 Lead Line 3 High Lateral File - 30"w

CH-01 Knoll Regeneration Workstation Task Chair

CH-02 DTC1-H122C Private Office Task Chair

CH-03 8585 Manager Workstation Guest Chair

CH-04 F37837XK Private Office Guest Chair

CH-05 8458 Conference Chair

CH-06 1051 FT2 Breakroom Chair

CH-07 9177ST Executive Office Task Chair

CH-08 9570ST Executive Conference Chair

CH-09 944 Executive Office Guest Chair

CH-10 4955 Executive Office Lounge Chair

PO-01 Lead Line Private Office - 78" U-Desk

PO-02 Lead Line Private Office - 60" U-Desk

PO-03 Lead Line Private Office - 72" L-Desk

PO-04 Kimball Senator Wood Executive Private Office

ST-01 Lead Line Storage Island - lateral files with top

ST-02 Lead Line Storage Island - 2-door cabinets with top

TA-01 Kimball Traditional - Panel Base Executive Conference Table

TA-03 SWP561 Breakroom Table - Round

TA-04 ARP-2442 Executive Office Coffee Table

TA-06B AH3072 Rectangle nesting Table - 30"d

TA-07 Match PO-01 & PO-02 Round table with drum base - 36"diam

TA-08 Match PO-01 & PO-02 Round table with drum base - 42"diam

WS-01A Lead Line Workstation 7'-6" x 5'-6"

WS-02 Lead Line Workstation 6' x 5'

WS-03 Lead Line Workstation 12' x 8' - Manager

WS-07A Lead Line Workstation 9' x 2'

WS-07B Lead Line Workstation 7'-6" x 2'

WS-08A Lead Line Workstation 5' x 2'-6"

Item Tag Legend

Description

TAB lll Manufacturers Summary List

MANUFACTURERS SUMMARY LIST

Herman Miller

855 East Main Ave. PO Box 302

Zeeland, MI 49464-0302 USA

Main Phone: 616 654 3000 www.hermanmiller.com

Knoll

1235 Water Street

East Greenville, PA 18041

Phone: 800 343-5665 www.knoll.com

Steelcase

901 44TH Street SE

Grand Rapids, Michigan 49508

Phone: 616.247.2710 www.steelcase.com

TAB lV Furniture Floor Plans

UP

UPUP

UPUP

DN

DNDN

DNDN

130 129 128 127 126 125 122 121 120 119 118 117

131-133

115-116

N O

T I

N C

O N

T R

A C

T N

O T

I N

C O

N T

R A

C T

226-230 224 223 222 221 220 219 218 217 216 215 215B 214 213 212 211 210 209 208 207 206 205 204 201-203

US Army Corps of Engineers ®

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I 'D

F

IL

E

N A

M E

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

F

IL

E N

U M

B E

R

1 2 3 4 5

D

C

B

A

IF101.1

F U

R N

IT

U

R E

P L A

N

O V

E R

A L L

S O

U T

H W

IN

G

R E

N O

V A

T

IO

N O

F B

U

IL

D

IN

G

S O

U T

H W

IN

G

F O

R T

W O

R T

H D

IS

T

R

IC

T

K E

N A

L L

F N

I S

A V

O Y

D R

IV

E

S U

IT

E

H O

U S

T O

N T

E X

A S

P H

O N

E (8

-8

J D

IX

O

N

K H

O L C

O M

B

C H

O P

K

IN

S

O C

T O

B E

R

CORRECTED FINAL

0' 8' 16'

GRAPHIC SCALE 1/8" = 1'-0"

4'

NORTH

KEY PLAN1" = 40'-0"IF101.1

A1 OVERALL FLOOR PLAN - FIRST FLOOR FURNITURE - SOUTH WING

1" = 40'-0"IF101.1

D1 OVERALL FLOOR PLAN - SECOND FLOOR FURNITURE - SOUTH WING

OCTOBER 22, 2019

M A

R K

D E

S C

R

IP

T

IO

N D

A T

E

CONF.

130G

OPEN OFFICE

130E

CORRIDOR

130D

STOR.

130C

VEST.

130A

E L E

V

L O

B B

Y

0B

OPEN OFFICE

129B

CORRIDOR

129A

CORRIDOR

128A

OPEN OFFICE

128E

OFFICE

128D

OFFICE

128C

OFFICE

128B

O P

E N

O F

F

IC

E

7B

MECH.

128G

VEST.

131A

MEN

131B

WOMEN

131C

FIRE RISER

133B

MECH.

133A O

P E

N O

F F

IC

E

0E

128129130131

CONF.

130G

OPEN OFFICE

130E

CORRIDOR

130D

STOR.

130C

VEST.

130A

E L E

V

L O

B B

Y

0B

OPEN OFFICE

129B

CORRIDOR

129A

CORRIDOR

128A

O P

E N

O F

F

IC

E

8E

OFFICE

128D

OFFICE

128C

OFFICE

128B

O P

E N

O F

F

IC

E

7B

MECH.

128G

VEST.

131A

MEN

131B

WOMEN

131C

FIRE RISER

133B

MECH.

133A O

P E

N O

F F

IC

E

0E

128129130131

CH-01

AC-01

AC-01

PO-02

CH-04

PO-03

CH-02

WS-01A

CH-05

TA-08

CH-01

AC-01

WS-01A

CH-02

US Army Corps of Engineers ®

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I 'D

F

IL

E

N A

M E

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

F

IL

E N

U M

B E

R

1 2 3 4 5

D

C

B

A

IF107

F U

R N

IT

U

R E

P L A

N

B A

Y S

-1

R E

N O

V A

T

IO

N O

F B

U

IL

D

IN

G

S O

U T

H W

IN

G

F O

R T

W O

R T

H D

IS

T

R

IC

T

K E

N A

L L

F N

I S

A V

O Y

D R

IV

E

S U

IT

E

H O

U S

T O

N T

E X

A S

P H

O N

E (8

-8

J D

IX

O

N

K H

O L C

O M

B

C H

O P

K

IN

S

O C

T O

B E

R

CORRECTED FINAL

0' 8' 16'

GRAPHIC SCALE 1/8" = 1'-0"

4'

NORTH

KEY PLAN1/8" = 1'-0"IF107

A1 FURNITURE PLAN - BAYS 128-133

1/8" = 1'-0"IF107

B1 FURNITURE PLAN - BAYS 128-133 TAGGED COLOR

M A

R K

D E

S C

R

IP

T

IO

N D

A T

E

OCTOBER 22, 2019

WH

O P

E N

O F

F

IC

E

7B

CORR.

127A OPEN OFFICE

127D

CORR.

127C

OPEN OFFICE

127E

JAN

123C

M E

C H

7F

127 126 125 124

O P

E N

O F

F

IC

E

7B

CORR.

127A OPEN OFFICE

127D

CORR.

127C

OPEN OFFICE

127E

JAN

123C

M E

C H

7F

127 126 125 124

WS-08AWS-02

ST-01 ST-02

AC-01

WS-08A

WS-02

CH-01

WS-01A

AC-01

WS-07B

US Army Corps of Engineers ®

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I 'D

F

IL

E

N A

M E

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

F

IL

E N

U M

B E

R

1 2 3 4 5

D

C

B

A

IF108

F U

R N

IT

U

R E

P L A

N

B A

Y S

-1

R E

N O

V A

T

IO

N O

F B

U

IL

D

IN

G

S O

U T

H W

IN

G

F O

R T

W O

R T

H D

IS

T

R

IC

T

K E

N A

L L

F N

I S

A V

O Y

D R

IV

E

S U

IT

E

H O

U S

T O

N T

E X

A S

P H

O N

E (8

-8

J D

IX

O

N

K H

O L C

O M

B

C H

O P

K

IN

S

O C

T O

B E

R

CORRECTED FINAL

0' 8' 16'

GRAPHIC SCALE 1/8" = 1'-0"

4'

NORTH

KEY PLAN1/8" = 1'-0"IF108

A1 FURNITURE PLAN - BAYS 124-127

1/8" = 1'-0"IF108

B1 FURNITURE PLAN - BAYS 124-127 TAGGED COLOR

M A

R K

D E

S C

R

IP

T

IO

N D

A T

E

WH

CORRIDOR

121A

OPEN OFFICE

121C

CONF.

121B

NIPR COMM

122D

ELECT.

122C

BREAK

122B

VEST.

122A

OPEN OFFICE

120E

OFFICE

120F

CORRIDOR

120A

OFFICE

120D

CONF.

120C

OFFICE

120B

VEST.

123A

WOMEN

123B

JAN

123C

123 122 121 120

CORRIDOR

121A

OPEN OFFICE

121C

CONF.

121B

NIPR COMM

122D

ELECT.

122C

BREAK

122B

VEST.

122A

OPEN OFFICE

120E

OFFICE

120F

CORRIDOR

120A

OFFICE

120D

CONF.

120C

OFFICE

120B

VEST.

123A

WOMEN

123B

JAN

123C

123 122 121 120

CH-05

CH-01

WS-01A

PO-02

CH-02 CH-04

CH-03

AC-01

WS-01A

CH-01

TA-06B

CH-05

CH-04 CH-02

PO-01 WS-01A

CH-01

AC-01

CH-02

PO-02

CH-06

TA-03

TA-06B

WS-03

US Army Corps of Engineers ®

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I 'D

F

IL

E

N A

M E

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

F

IL

E N

U M

B E

R

1 2 3 4 5

D

C

B

A

IF109

F U

R N

IT

U

R E

P L A

N

B A

Y S

-1

R E

N O

V A

T

IO

N O

F B

U

IL

D

IN

G

S O

U T

H W

IN

G

F O

R T

W O

R T

H D

IS

T

R

IC

T

K E

N A

L L

F N

I S

A V

O Y

D R

IV

E

S U

IT

E

H O

U S

T O

N T

E X

A S

P H

O N

E (8

-8

J D

IX

O

N

K H

O L C

O M

B

C H

O P

K

IN

S

O C

T O

B E

R

CORRECTED FINAL

0' 8' 16'

GRAPHIC SCALE 1/8" = 1'-0"

4'

NORTH

KEY PLAN1/8" = 1'-0"IF109

A1 FURNITURE PLAN - BAYS 120-123

1/8" = 1'-0"IF109

B1 FURNITURE PLAN - BAYS 120-123 TAGGED COLOR

M A

R K

D E

S C

R

IP

T

IO

N D

A T

E

OPEN OFFICE

117D CORRIDOR

117A

OPEN OFFICE

117C

CONF.

117B

CORRIDOR

118A

OPEN OFFICE

118B

OPEN OFFICE

118C

OFFICE

118D

MECH.

119E

OFFICE

119D

CORRIDOR

119A

OPEN OFFICE

119C

SIPR COMM.

119B

OPEN OFFICE

119F

MENS

115A

MECH

115C

STOR

116B

VEST

116A

JAN

115B

MECH

141F

118 117 116 115119

119 118 117 115-116

CH-05

TA-06B

AC-01

CH-01

CH-03

CH-02

CH-01

WS-01A

CH-01

PO-02

CH-02

PO-02

AC-01

WS-01A

CH-04CH-01

WS-01A

CH-04

CH-01

WS-03

US Army Corps of Engineers ®

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I 'D

F

IL

E

N A

M E

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

F

IL

E N

U M

B E

R

1 2 3 4 5

D

C

B

A

IF110

F U

R N

IT

U

R E

P L A

N

B A

Y S

-1

R E

N O

V A

T

IO

N O

F B

U

IL

D

IN

G

S O

U T

H W

IN

G

F O

R T

W O

R T

H D

IS

T

R

IC

T

K E

N A

L L

F N

I S

A V

O Y

D R

IV

E

S U

IT

E

H O

U S

T O

N T

E X

A S

P H

O N

E (8

-8

J D

IX

O

N

K H

O L C

O M

B

C H

O P

K

IN

S

O C

T O

B E

R

CORRECTED FINAL

0' 8' 16'

GRAPHIC SCALE 1/8" = 1'-0"

4'

NORTH

KEY PLAN1/8" = 1'-0"IF110

A1 FURNITURE PLAN - BAYS 115-119

1/8" = 1'-0"IF110

B1 FURNITURE PLAN - BAYS 115-119 TAGGED COLOR

M A

R K

D E

S C

R

IP

T

IO

N D

A T

E

DN

DN

226-230 224 223 222 221 220

STORAGE

224A

OFFICE

OPEN OFFICE

BREAKROOM

220A

MECHANICAL

220B

S

IP

R C

O M

M

D

NIPR COMM

220C

VEST.

220E

OFFICE

220F

OFFICE

220G

A /V

OPEN OFFICE

224B

STOR.

ELEV. MACH.

STOR.

CORR.

230A

S T

A

IR

MEN

WOMEN

CORRIDOR

200H

CORRIDOR

200G

CORRIDOR

200K

226-230 224 223 222 221 220

STORAGE

224A

OFFICE

OPEN OFFICE

BREAKROOM

220A

MECHANICAL

220B

S

IP

R C

O M

M

D

NIPR COMM

220C

VEST.

220E

OFFICE

220F

OFFICE

220G

A /V

OPEN OFFICE

224B

STOR.

ELEV. MACH.

STOR.

CORR.

230A

S T

A

IR

MEN

WOMEN

CORRIDOR

200H

CORRIDOR

200G

CORRIDOR

200K

TA-07

CH-05

CH-01

WS-01A

CH-03

WS-02

CH-01

CH-02

CH-04

ST-02

ST-01

AC-02 AC-01

TA-04

CH-09

CH-10

PO-04

PO-02

WS-03

CH-07

WS-02

US Army Corps of Engineers ®

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I 'D

F

IL

E

N A

M E

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

F

IL

E N

U M

B E

R

1 2 3 4 5

D

C

B

A

IF116

F U

R N

IT

U

R E

P L A

N

B A

Y S

-2

R E

N O

V A

T

IO

N O

F B

U

IL

D

IN

G

S O

U T

H W

IN

G

F O

R T

W O

R T

H D

IS

T

R

IC

T

K E

N A

L L

F N

I S

A V

O Y

D R

IV

E

S U

IT

E

H O

U S

T O

N T

E X

A S

P H

O N

E (8

-8

J D

IX

O

N

K H

O L C

O M

B

C H

O P

K

IN

S

O C

T O

B E

R

CORRECTED FINAL

0' 8' 16'

GRAPHIC SCALE 1/8" = 1'-0"

4'

NORTH

KEY PLAN1/8" = 1'-0"IF116

A1 FURNITURE PLAN - BAYS 220-230

1/8" = 1'-0"IF116

B1 FURNITURE PLAN - BAYS 220-230 TAGGED COLOR

M A

R K

D E

S C

R

IP

T

IO

N D

A T

E

A

IF

A

IF

A

IF

A

IF

A

IF

A

IF

A

IF

A

IF

A

IF

A

IF

219 218 217 216 215 215B

EXECUTIVE

CONFERENCE

218A /V

OFFICE

OFFICE

OFFICE

REST

215A

CORRIDOR

200F CORRIDOR

200E

STAIRWELL

215B

219 218 217 216 215 215B

EXECUTIVE

CONFERENCE

218A /V

OFFICE

OFFICE

OFFICE

REST

215A

CORRIDOR

200F CORRIDOR

200E

STAIRWELL

215B

CH-08

TA-01

US Army Corps of Engineers ®

SHEET ID

U S

A R

M Y

C O

R P

S O

F E

N G

IN

E

E R

S

D R

A W

N B

Y

D E

S

IG

N E

D B

Y

S U

B M

IT

T

E D

B Y

S

IZ

E

C H

E C

K E

D B

Y

A N

S I 'D

F

IL

E

N A

M E

IS

S

U E

D A

T E

C O

N T

R A

C T

N O

S O

L

IC

IT

A

T

IO

N N

O

F

IL

E N

U M

B E

R

1 2 3 4 5

D

C

B

A

IF117

F U

R N

IT

U

R E

P L A

N

B A

Y S

-2

R E

N O

V A

T

IO

N O

F B

U

IL

D

IN

G

S O

U T

H W

IN

G

F O

R T

W O

R T

H D

IS

T

R

IC

T

K E

N A

L L

F N

I S

A V

O Y

D R

IV

E

S U

IT

E

H O

U S

T O

N T

E X

A S

P H

O N

E (8

-8

J D

IX

O

N

K H

O L C

O M

B

C H

O P

K

IN

S

O C

T O

B E

R

CORRECTED FINAL

0' 8' 16'

GRAPHIC SCALE 1/8" = 1'-0"

4'

NORTH

KEY PLAN1/8" = 1'-0"IF117

A1 FURNITURE PLAN - BAYS 215-219

1/8" = 1'-0"IF117

B1 FURNITURE PLAN - BAYS 215-219 TAGGED COLOR

M A

R K

D E

S C

R

IP

T

IO

N D

A T

E

TAB V

Furniture Illustration Sheets

RENOVATION OF BUILDING 16 - SOUTH WING

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE SURFACE with square edge, solid color laminate, 24”x66”, electric mechanism, base to match all other metal components with metallic paint. no grommets. Provide adequate streachers for length of top so product will not sag with 300lb weight limit.

FIXED RETURN SURFACE with square edge, solid color laminate, 24”x66”, provide standard grommets or gap for cords.

+/- 50” HIGH PANELS on interior spine to be grade 2 fabric. COM alone cannot be counted as a grade level. Min 4 simplex outlets in each station with 4-circuit power. Access to power must be located in panel located in front of sit to stand table.

MARKERBOARD tile to be 36”w x 20”h and placed above return surface. Must be imbedded tile and not applied.

BOX/FILE UNDER SURFACE LATERAL to be 36”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

WIRE MANAGEMENT metal wire management tray to hold all wires in fully enclosed system. cannot be open metal tray. To be located under the height adjustable desk, min 5’-0” length.

POWER STRIP to mount to underside of worksurface.

* All workstation worksurfaces to be standard solid laminate

* Task and guest seating is not included in pricing of workstation

* 4-circuit, 8-wire system, 2+2 power

WORKSTATION TYPICAL: WS-01A

= POWER LOCATION

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE SURFACE with square edge, solid color laminate, 24”x66”, electric mechanism, base to match all other metal components with metallic paint. no grommets. Provide adequate streachers for length of top so product will not sag with 300lb weight limit.

FIXED RETURN SURFACE with square edge, solid color laminate, 24”x66”, provide standard grommets or gap for cords.

+/- 50” HIGH PANELS on interior spine to be grade 2 fabric. COM alone cannot be counted as a grade level. Min 4 simplex outlets in each station with 4-circuit power. Access to power must be located in panel located in front of sit to stand table.

+/- 30” HIGH PANELS on return interior spine to be grade 2 fabric. COM alone cannot be counted as a grade level. Min 4 simplex outlet in each station with 4-circuit power.

MARKERBOARD tile to be 36”w x 20”h and placed above desk surface. Must be imbedded tile and not applied.

BOX/FILE UNDER SURFACE LATERAL to be 36”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

WIRE MANAGEMENT metal wire management tray to hold all wires in fully enclosed system. cannot be open metal tray. To be located under the height adjustable desk, min 5’-0” length.

POWER STRIP to mount to underside of worksurface.

* All workstation worksurfaces to be standard solid laminate

* Task and guest seating is not included in pricing of workstation

* 4-circuit, 8-wire system, 2+2 power

WORKSTATION TYPICAL: WS-01B

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE SURFACE with square edge, solid color laminate, 24”x48”, electric mechanism, base to match all other metal components with metallic paint. no grommets. Provide adequate streachers for length of top so product will not sag with 300lb weight limit.

FIXED RETURN SURFACE with square edge, solid color laminate, 24”x60”, provide standard grommets or gap for cords.

+/- 50” HIGH PANELS on interior spine to be grade 2 fabric. COM alone cannot be counted as a grade level. Min 4 simplex outlets in each station with 4-circuit power. Access to power must be located in panel located in front of sit to stand table.

MARKERBOARD tile to be 36”w x 20”h and placed above return surface. Must be imbedded tile and not applied.

BOX/FILE UNDER SURFACE LATERAL to be 36”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

WIRE MANAGEMENT metal wire management tray to hold all wires in fully enclosed system. cannot be open metal tray. To be located under the height adjustable desk, min 5’-0” length.

POWER STRIP to mount to underside of worksurface.

*All workstation worksurfaces to be standard solid laminate

* Task and guest seating is not included in pricing of workstation

* 4-circuit, 8-wire system, 2+2 power

WORKSTATION TYPICAL: WS-02

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE SURFACE on bridge with square edge, solid color laminate, 24”x66”, electric mechanism, base to match all other metal components, with metallic paint. Provide adequate streachers for length of top so product will not sag with 300lb weight limit.

FIXED DESK SURFACE with square edge, solid color laminate, 30”x60”, with modesty panel, and provide standard grommets or gap for cords.

FIXED CREDENZA SURFACE with square edge, solid color laminate, 24”x72” and provide standard grommets or gap for cords.

+/- 65” HIGH PANELS on interior spine to be grade 2 fabric. COM alone cannot be counted as a grade level. Min 4 simplex outlets in each station with 4-circuit power. To be located at area 1.

+/- 65”HIGH SLIDING PANEL DOOR with frosted acrylic.

OVERHEAD STORAGE mounted to panel with hinged doors. Laminate style preferred.

BOX/FILE UNDER SURFACE PED to be 15”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

BOX/FILE UNDER SURFACE LATERAL to be 36”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

WIRE MANAGEMENT plastic or metal wire management tray to be located under the height adjustable desk, min 4’-0” length.

POWER STRIP to mount to underside of worksurface.

*All workstation worksurfaces to be standard solid laminate

* Task and guest seating is not included in pricing

*4-circuit, 8-wire system, 2+2 power

WORKSTATION TYPICAL: WS-03

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE SURFACE on bridge with square edge, solid color laminate, 24”x66”, electric mechanism, base to match all other metal components, with metallic paint. Provide adequate stretchers for length of top so product will not sag with 300lb weight limit.

FIXED DESK SURFACE with square edge, solid color laminate, 30”x60”, with modesty panel, and provide standard grommets or gap for cords.

FIXED CREDENZA SURFACE with square edge, solid color laminate, 24”x72” and provide standard grommets or gap for cords.

+/- 65” HIGH PANELS on interior spine to be grade 2 fabric. COM alone cannot be counted as a grade level. Min 4 simplex outlets in each station with 4-circuit power. To be located at area 1.

+/- 65”HIGH SLIDING PANEL DOOR with frosted acrylic.

OVERHEAD STORAGE mounted to panel with hinged doors. Laminate style preferred.

BOX/FILE UNDER SURFACE PED to be 15”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

BOX/FILE UNDER SURFACE LATERAL to be 36”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

WIRE MANAGEMENT plastic or metal wire management tray to be located under the height adjustable desk, min 4’-0” length.

POWER STRIP to mount to underside of worksurface.

*All workstation worksurfaces to be standard solid laminate

* Task and guest seating is not included in pricing

*4-circuit, 8-wire system, 2+2 power

WORKSTATION TYPICAL: WS-04

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE SURFACE on bridge with square edge, solid color laminate, 24”x66”, electric mechanism, base to match all other metal components, with metallic paint. Provide adequate stretchers for length of top so product will not sag with 300lb weight limit.

FIXED RETURN SURFACE with square edge, solid color laminate, 24”x72”, and provide standard grommets or gap for cords.

+/- 65” HIGH PANELS on interior spine to be grade 2 fabric. COM alone cannot be counted as a grade level. Min 4 simplex outlets in each station with 4-circuit power. To be located at area 1.

+/- 65”HIGH SLIDING PANEL DOOR with frosted acrylic.

OVERHEAD STORAGE mounted to panel with hinged doors. Laminate style preferred.

BOX/FILE UNDER SURFACE LATERAL to be 36”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

WIRE MANAGEMENT plastic or metal wire management tray to be located under the height adjustable desk, min 4’-0” length.

POWER STRIP to mount to underside of worksurface.

*All workstation worksurfaces to be standard solid laminate

* Task and guest seating is not included in pricing

*4-circuit, 8-wire system, 2+2 power

WORKSTATION TYPICAL: WS-05

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE SURFACE with square edge, solid color laminate, 24”x60”, electric mechanism, base to match all other metal components with metallic paint. no grommets. Provide adequate stretchers for length of top so product will not sag with 300lb weight limit.

FIXED RETURN SURFACE with square edge, solid color laminate, 24”x84”, provide standard grommets or gap for cords.

+/- 50” HIGH PANELS on interior spine to be grade 2 fabric. COM alone cannot be counted as a grade level. Min 4 simplex outlets in each station with 4-circuit power. Access to power must be located in panel located in front of sit to stand table.

MARKERBOARD tile to be 36”w x 20”h and placed above return surface. Must be imbedded tile and not applied.

BOX/FILE MOBILE PED to be 15”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

BOX/FILE UNDERSURFACE LATERAL to be 36”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

WIRE MANAGEMENT metal wire management tray to hold all wires in fully enclosed system. cannot be open metal tray. To be located under the height adjustable desk, min 5’-0” length.

POWER STRIP to mount to underside of worksurface.

*All workstation worksurfaces to be standard solid laminate

* Task and guest seating is not included in pricing of workstation

*4-circuit, 8-wire system, 2+2 power

WORKSTATION TYPICAL: WS-06A

= POWER LOCATION

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE SURFACE with square edge, solid color laminate, 24”x60”, electric mechanism, base to match all other metal components with metallic paint. no grommets. Provide adequate stretchers for length of top so product will not sag with 300lb weight limit.

FIXED RETURN SURFACE with square edge, solid color laminate, 24”x84”, provide standard grommets or gap for cords.

+/- 50” HIGH PANELS on interior spine to be grade 2 fabric. COM alone cannot be counted as a grade level. Min 4 simplex outlets in each station with 4-circuit power. Access to power must be located in panel located in front of sit to stand table.

+/-42” HIGH PANELS on interior spine located beneath transaction counter, to be grade 2 fabric, COM alone cannot be counted as a grade level. Min 4 simplex outlets in each station with 4-circuit power.

MARKERBOARD tile to be 36”w x 12”h and placed above return surface. Must be imbedded tile and not applied.

BOX/FILE MOBILE PED to be 15”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

BOX/FILE UNDERSURFACE LATERAL to be 36”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

TRANSACTION COUNTER to be 12”x84” with solid color laminate.

WIRE MANAGEMENT metal wire management tray to hold all wires in fully enclosed system. cannot be open metal tray. To be located under the height adjustable desk, min 5’-0” length.

POWER STRIP to mount to underside of worksurface.

* All workstation worksurfaces to be standard solid laminate

* Task and guest seating is not included in pricing of workstation

*4-circuit, 8-wire system, 2+2 power

WORKSTATION TYPICAL: WS-06B

= POWER LOCATION

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE SURFACE with square edge, solid color laminate, 24”x66”, electric mechanism, base to match all other metal components with metallic paint. no grommets. Provide adequate stretchers for length of top so product will not sag with 300lb weight limit.

FIXED ADJACENT SURFACE with square edge, solid colorlaminate, 24”x42”, provide standard grommets or gap for cords.

+/- 50” HIGH PANELS on interior spine to be grade 2 fabric. COM alone cannot be counted as a grade level. Min 4 simplex outlets in each station with 4-circuit power. Access to power must be located in panel located in front of sit to stand table.

MARKERBOARD tile to be 42”w x 20”h and placed above lateral fiile. Must be imbedded tile and not applied.

BOX/FILE UNDER SURFACE LATERAL to be 42”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

WIRE MANAGEMENT metal wire management tray to hold all wires in fully enclosed system. cannot be open metal tray. To be located under the height adjustable desk, min 5’-0” length.

POWER STRIP to mount to underside of worksurface.

* All workstation worksurfaces to be standard solid laminate

* Task and guest seating is not included in pricing of workstation

* 4-circuit, 8-wire system, 2+2 power

WORKSTATION TYPICAL: WS-07A

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE SURFACE with square edge, solid color laminate, 24”x48”, electric mechanism, base to match all other metal components with metallic paint. no grommets. Provide adequate stretchers for length of top so product will not sag with 300lb weight limit.

FIXED ADJACENT SURFACE with square edge, solid color laminate, 24”x42”, provide standard grommets or gap for cords.

+/- 50” HIGH PANELS on interior spine to be grade 2 fabric. COM alone cannot be counted as a grade level. Min 4 simplex outlets in each station with 4-circuit power. Access to power must be located in panel located in front of sit to stand table.

MARKERBOARD tile to be 42”w x 20”h and placed above lateral file. Must be imbedded tile and not applied.

BOX/FILE UNDER SURFACE LATERAL to be 42”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

WIRE MANAGEMENT metal wire management tray to hold all wires in fully enclosed system. cannot be open metal tray. To be located under the height adjustable desk, min 5’-0” length.

POWER STRIP to mount to underside of worksurface.

* All workstation worksurfaces to be standard solid laminate

* Task and guest seating is not included in pricing of workstation

* 4-circuit, 8-wire system, 2+2 power

WORKSTATION TYPICAL: WS-07B

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

FIXED SURFACE with square edge, solid color laminate, 30”x60”, no grommets. Provide adequate stretchers for length of top so product will not sag with 300lb weight limit.

POST LEGS base to match all other metal components with metallic paint

WIRE MANAGEMENT metal wire management tray to hold all wires in fully enclosed system. cannot be open metal tray. To be located under the height adjustable desk, min 5’-0” length.

* All workstation worksurfaces to be standard solid laminate

* Task and guest seating is not included in pricing of workstation

WORKSTATION TYPICAL: WS-08A

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE SURFACE on bridge with square edge, woodgrain laminate, 24”x66”, electric mechanism, base to match all other metal components, provide standard grommets for cords.

FIXED DESK SURFACE with square edge, woodgrain laminate, 30”x78”, with full height modesty panel, BBF, and provide standard grommets for cords.

FIXED CREDENZA SURFACE with square edge, woodgrain laminate, 24”x48” and provide standard grommets for cords.

WALL MOUNT TACKBOARD unit with open shelf 50”h x 72”w with grade 2 fabric and standard woodgrain laminate.

OPEN BOOKCASE freestanding 80”h x 36”w x 24”d with standard woodgrain laminate.

FILE/FILE UNDER SURFACE PED to be 15”w x 24”d with standard laminate chassis and drawer fronts.

WIRE MANAGEMENT plastic or metal wire management tray to be located under the height adjustable desk, min 4’-0” length.

POWER STRIP to mount to underside of worksurface.

* All wood tones shown in 3D should be woodgrain laminate

* Task and guest seating is not included in pricing

PRIVATE OFFICE TYPICAL: PO-01

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE SURFACE on bridge with square edge, woodgrain laminate, 24”x66”, electric mechanism, base to match all other metal components, provide standard grommets for cords.

FIXED DESK SURFACE with square edge, woodgrain laminate, 30”x60”, with full height modesty panel, and provide standard grommets for cords.

FIXED CREDENZA SURFACE with square edge, woodgrain laminate, 24”x48” and provide standard grommets for cords.

WALL MOUNT TACKBOARD unit with open shelf 50”h x 72”w with grade 2 fabric and standard woodgrain laminate.

OPEN BOOKCASE freestanding 80”h x 30”w x 24”d with standard woodgrain laminate.

FILE/FILE UNDER SURFACE PED to be 15”w x 24”d with standard laminate chassis and drawer fronts.

BOX/BOX/FILE UNDERSURFACE PED to be 15”w x 24”d with standard laminate chassis and drawer fronts.

WIRE MANAGEMENT plastic or metal wire management tray to be located under the height adjustable desk, min 4’-0” length.

POWER STRIP to mount to underside of worksurface.

* All wood tones shown in 3D should be woodgrain laminate

* Task and guest seating is not included in pricing

PRIVATE OFFICE TYPICAL: PO-02

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE SURFACE desk with square edge, woodgrain laminate, 30”x72”, electric mechanism, base to match all other metal components, provide standard grommets for cords.

FIXED RETURN SURFACE with square edge, woodgrain laminate, 24”x48”, and provide standard grommets for cords.

MODESTY PANEL, woodgrain laminate, undersurface mount to extend full length of desk and to be inset 6”.

BOX/BOX/FILE UNDERSURFACE PED to be 15”w x 24”d with standard laminate chassis and drawer fronts.

FILE/FILE UNDER SURFACE PED to be 15”w x 24”d with standard laminate chassis and drawer fronts.

WIRE MANAGEMENT plastic or metal wire management tray to be located under the height adjustable desk, min 4’-0” length.

POWER STRIP to mount to underside of worksurface.

* All wood tones shown in 3D should be woodgrain laminate

* Task and guest seating is not included in pricing

PRIVATE OFFICE TYPICAL: PO-03

FRONT BACK

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

ADJUSTABLE DESK with square edge, wood veneer, 36”x72”, electric mechanism, base to be hidden in BBF peds on each side, provide standard grommets for cords.

FIXED CREDENZA SURFACE with square edge, wood veneer, 24”x138” and provide standard grommets for cords.

2 DOOR UNDERSURFACE CABINET to be 36”h x 24”d with standard wood veneer chassis and door fronts.

FILE/FILE UNDER SURFACE LATERAL to be 36”w x 24”d with standard wood veneer chassis and drawer fronts.

WIRE MANAGEMENT plastic or metal wire management tray to be located under the height adjustable desk, min 4’-0” length.

POWER STRIP to mount to underside of worksurface.

* This office only to be dark wood veneer

* Task and guest seating is not included in pricing

PRIVATE OFFICE TYPICAL: PO-04

FRONT BACK

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

FIXED SURFACE with square edge, woodgrain laminate, 24”x60”, top to fit over top of (2) lateral files.

3 HIGH LATERALS to be 30”w x 24”d with painted metal chassis and drawer fronts with metallic paint.

* All wood tones shown in 3D should be woodgrain laminate

WORKSTATION TYPICAL: ST-01

JOINT BASE SAN ANTONIO - FORT SAM HOUSTON, SAN ANTONIO, TEXAS

CORRECTED FINAL SUBMITTAL

OCTOBER 2019

BASE BID COMPONENTS:

FIXED SURFACE with square edge, woodgrain laminate, 24”x60”, top to fit over top of (2) storage cabinets..

2 DOOR CABINETS to be 30”w x 24”d with painted metal chassis and door fronts with metallic paint -height to match 3-high lateral files.

* All wood tones shown in 3D should be woodgrain laminate

WORKSTATION TYPICAL: ST-02

CORRECTED FINAL SUBMITTAL

Telephone: Fax: Fax:

Unit cost: Price Total:

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

Dallas, TX. 75206 kelcie_holcomb@gensler.com

Level 1: 62

Level 2: 13

Standard Mesh

Grade 3/C

Standard paint

Photo:

GSA Contract Period:

Model Number:

POC:

Model Name: Regeneration

Description:

FSC Group:

Basis of Design

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Knoll Item name: Workstation Task Chair

Item Number: CH-01

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

BPA/GSA Contract No:

Finish Samples:

Dimension: 29"w x 24.6d"x 38.1-43.3"h

Black frame, Upholstered seat, mesh back, adjustable arms, carpet casters.

Task chair with mesh back; standard cylinder; carpet casters;

adjustable arms; black frame. Upholstered seat.

Finish:

Delivery:

Qty:

Location:

Workstations

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

Level 1: 11

Level 2: 2

Leather

Grade 1/A

Polished aluminum frame, leather seat & back, adjustable arms, carpet casters, upholstered seat.

Qty:

Delivery:

Location:

Private Offices

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Finish Samples:

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Dorso-T

Model Number: DTC1-H122C

Description:

Task chair with grade 1 leather back & seat; standard cylinder;

carpet casters; adjustable arms; polished aluminum frame.

Dimension: 26.5"w x 25d"x 38.5"-43.75"h

Finish:

Photo:

Basis of Design

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Krug Item name: Private Office Task Chair

Item Number: CH-02

CORRECTED FINALSUBMITTAL

OCTOBER2019

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

Location:

Manager Workstations with 65"H Panels

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Qty:

Delivery:

Side chair with mesh back and upholstered seat with arms;

standard four legs, steel glides (carpet).

Dimension: 23"w x 24d"x 36"h

Finish:

Black frame, Upholstered seat and back.

Finish Samples:

Grade 3/C

Level 1: 2

Level 2: 1

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Zooey

Model Number: 8585

Description:

Photo:

Basis of Design

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Global Item name: Manager Workstation Guest Chair

Item Number: CH-03

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

Private Offices

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Qty:

Delivery:

Guest chair with arms; upholstered seat and back with wood frame.

Dimension: 22.75"w x 22.63d"x 32.25"h

Finish:

Wood frame, Upholstered seat and back.

Finish Samples:

Grade 3/C

Level 1: 21

Level 2: 4

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Balance

Model Number: F37837XK

Description:

Photo:

Basis of Design

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: OFS Item name: Private Office Guest Chair

Item Number: CH-04

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

Conference Rooms and Open Collaboration

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Qty:

Delivery:

Task chair with mesh back, upholstered seat; standard cylinder;

carpet casters; fixed arms; black frame.

Dimension: 26.5"w x 25d"x 38.75"-43"h

Finish:

Black frame, Upholstered seat.

Finish Samples:

Standard Mesh

Grade 3/C

Standard paint

Level 1: 26

Level 2: 4

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Prefer

Model Number: 8458

Description:

Photo:

Basis of Design

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Global Furniture Group Item name: Conference Chair

Item Number: CH-05

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

Breakrooms

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Qty:

Delivery:

Multipurpose armless poly chair with wire rod frame, felt glides and poly seat.

Dimension: 21"w x 23d"x 33.4"h

Finish:

Standard Poly Shell

Chrome base

Felt glides

Finish Samples:

Standard Poly Shell

Chrome base

Felt glides

Level 1: 4

Level 2: 0

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Rio Wire Rod

Model Number: 1051 FT2

Description:

Photo:

Basis of Design

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Sit On It Seating Item name: Breakroom Chair

Item Number: CH-06

CORRECTED FINALSUBMITTAL

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

2nd Floor Executive Office

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Qty:

Delivery:

HB Semi Attached Open Upholstered Arms with Wood Base;

high back

Dimension: 27"w x 27d"x 44"h

Finish:

Dark wood veneer base

Finish Samples:

Grade 1 Leather

Standard dark wood veneer base

Level 1: 0

Level 2: 1

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Marquis

Model Number: 9177ST

Description:

Photo:

Basis of Design

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Cabot Wrenn Item name: Executive Office Task Chair

Item Number: CH-07

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

Photo:

Basis of Design

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Cabot Wrenn Item name: Executive Conference Chair

Item Number: CH-08

Finish Samples:

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Bradford

Model Number: 9570ST

Description:

Plain upholstered back with wood veneer base (as shown in photo)

Dimension: 28"w x 31"d x 44"h

Finish:

Grade 1 Leather

Wood veneer base

Qty:

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Level 2: 44

Location:

2nd Floor Executive Conference Room

Level 1: 0 Delivery:

Dark wood veneer base

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Kimball Item name: Executive Office Guest Chair

Item Number: CH-09

Finish Samples:

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Independence Newcastle

Model Number: 944

Description:

Side chair, no casters; fully upholstered

Dimension: 27"w x 29d"x 34"h

Finish:

Grade 1 Leather

Standard wood veneer base & frame

Qty:

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Level 2: 2

Location:

2nd Floor Executive Office

Level 1: 0 Delivery:

Dark wood veneer

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Cabot Wrenn Item name: Executive Office Lounge Chair

Item Number: CH-10

Finish Samples:

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Ellie

Model Number: 4955

Description:

Leather upholstered seat and back; wood legs

Dimension: 32.25"w x 35"d x 36"h

Finish:

Grade 1 Leather

Standard wood veneer base

Qty:

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Level 2: 4

Location:

2nd Floor Executive Office

Level 1: 0 Delivery:

Standard dark wood veneer

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Lead Line Item name: 3 High Lateral File

Item Number: AC-01

Finish Samples:

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Lead Line

Model Number:

Description:

Standard metallic paint; to be standing height

Dimension: 36"w x 18"dx 36"h

Finish:

Standard metallic paint

Qty:

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Level 2: 1

Location:

Open areas

Level 1: 19 Delivery:

Standard metallic paint

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

Standard metallic paint

Qty:

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Level 2: 2

Location:

Open areas

Level 1: 0 Delivery:

Standard metallic paint

Finish Samples:

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name:

Model Number:

Description:

Standard metallic paint; to be standing height

Dimension: 30"w x 18d"x 36"h

Finish:

Photo:

Basis of Design

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Item name: 3 High Lateral File

Item Number: AC-02

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Lead Line Item name:2 Hight Lateral File

Item Number: AC-03

Finish Samples:

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Lead Line

Model Number:

Description:

Standard metallic paint

Dimension: 30"w x 18d"x 30"h

Finish:

Standard metallic paint

Qty:

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Level 2: 0

Location:

Level 1: 0 Delivery:

Standard metallic paint

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Fluid Concepts Item name: Mix Screen

Item Number: AC-04

Finish Samples:

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Mix Screen

Model Number: MSS4876LL-G1

Description:

Anodized frame; row 3 (top panel) to be frosted acrylic and rows 1-2 (bottom two panels) to be Grade 1; base plate with levellers (LL)

Dimension: 48"w x 76"h

Finish:

Anodized frame; row 3 (top panel) to be frosted acrylic and rows 1-2 (bottom two panels) to be Grade 1

Qty:

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Level 2: 0

Location:

Level 1: 0 Delivery:

Anodized frame; row 3 (top panel) to be frosted acrylic and rows 1-2 (bottom two panels) to be Grade 1

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Lead Line Item name: Mobile Ped

Item Number: AC-05

Finish Samples:

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Lead Line

Model Number:

Description:

Standard metallic paint; no cushion top

Dimension: 15"w

Finish:

Standard metallic paint

Qty:

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Level 2: 0

Location:

Level 1: 0 Delivery:

Standard metallic paint

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

2nd Floor Executive Conference Room

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Qty:

Delivery:

Rectangle table top; panel bases without molding; with power in the top; at least one of the bases must conceal the power cords

Dimension: 24' w x 5'd x 30"h

Finish:

Dark wood veneer top and base.

Finish Samples:

Wood veneer top and base.

Level 1: 0

Level 2: 1

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Traditional

Model Number:

Description:

Photo:

Basis of Design

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Kimball Item name: Executive Conference Table

Item Number: TA-01

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

Private Offices

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Qty:

Delivery:

High performance Laminate, with a 1" thick top.

Dimension: 42"diam.

Finish:

Standard woodgrain laminate

Finish Samples:

Standard woodgrain laminate

Level 1: 0

Level 2: 0

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Private Office Lead Line

Model Number:

Description:

Photo:

Basis of Design

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: To match Private Office PO-01 & PO-02 Item name: Table in Private Office

Item Number: TA-02

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

Breakroom

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Qty:

Delivery:

High performance Laminate, with a 1" thick top; with round base

Dimension: 36"diam.

Finish:

Standard laminate top and standard paint base

Finish Samples:

Standard laminate top and standard paint base

Level 1: 2

Level 2: 0

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Swap

Model Number: SWP561 (Top - GRBTP36; Base - GRB28)

Description:

Photo:

Basis of Design

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Global Furniture Group Item name: Café Table

Item Number: TA-03

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

2nd Floor Executive Office

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Qty:

Delivery:

Rectangular magazine table

Dimension: 42"w x 24d"x 15"h

Finish:

Cherry wood veneer

Finish Samples:

Standard cherry wood veneer for top and base.

Level 1: 0

Level 2: 1

POC:

BPA/GSA Contract No:

GSA Contract Period:

FSC Group:

Model Name: Arpeggio

Model Number: ARP-2442

Description:

Photo:

Basis of Design

SOUTH WING

Fort Sam Houston, Texas for

U.S. Army North (Fifth Army)

Manufacturer: Kimball Item name: Executive Office Coffee Table

Item Number: TA-04

Installation:

Total:

Prepared by: Kelcie Holcomb, RID, NCIDQ ph: 214.273.1682

Gensler www.gensler.com

5005 Greenville Ave.

Breakroom

Dealer is responsible for reviewing models and quantities based on supplied floor plan. Dealer is responsible for alerting NAVFAC of needed and necessary changes that affect stability and overall functionality.

Qty:

Delivery:

Rectangular top; High performance…