Attachment 11 Sample TO 1.doc

Sample Tasks Order 1 - Contract Instructor Program

Fort the procurement of

TRAINING, DOCTRINE, CAPABILITY DEVELOPMENT, ANALYSIS,

INSTRUCTION, ROLE PLAYERS AND SUPPORT SERVICES

AT FORT KNOX KY, AND FORT BENNING GA

MANEUVER CENTER OF EXCELLENCE

Aug 09 NOTE: MICC Center – Fort Bragg will be providing workload data to assist in the calculation of Sample Task Order 1 and Sample Task Order 2 total price at a later date. This data will be inclusive of class schedule, duration, size, and student/intructor ratio.

1. BACKGROUND: The objective of this Performance Work Statement (PWS) is to provide for qualified contract instructors and instructor services to teach selected classes at the Maneuver Center of Excellence (MCOE), and enable accomplishment of the high priority mission within the Training and Doctrine Command (TRADOC) and the MCOE of training the student load to the established standard.

2. SCOPE OF WORK: The Contractor shall provide qualified instructors to teach selected classes at the Maneuver Center of Excellence based on the HQDA/TRADOC student load projections, approved master training schedules, and approved Programs of Instruction (POI). Instructor duties include preparation for instruction, conduct of instructions, counseling and testing. All work shall normally be performed at Fort Benning although there will be Mobile Training Teams (MTTs) to support proponent soldiers and units worldwide. The Contractor shall provide a workforce with sufficient expertise, experience, skills, and other necessary credentials to accomplish the tasks described below. The Contractor is responsible for identifying personnel with the requisite technical expertise, experience, skills and for notifying the Contracting Officer’s Representative (COR) of any real or potential deficiencies in personnel availability. This does not, however, relieve the Contractor of any performance requirements

2.1. Task Area 1: Prepare a Start of Work Briefing (SOWB). The Contractor shall develop a SOWB in accordance with the contract.

2.1.1. The SOWB shall describe in detail the Contractor's approach to:

2.1.1.1. Provide qualified instructors to support the MCOE’s

· Military Occupational Specialty (MOS) 11B, 11C, 11M, 11H, 19D and 19K Initial Entry Training (IET) and One Station Unit Training (OSUT)

· Master Gunner programs of instruction

· Non Commissioned Officer Education System

· Officer Education System or Basic Officer Leader Course (BOLC)

2.1.1.2. General prerequisites applicable to all instructors include:

2.1.1.2.1. Instruction shall take place in Government furnished classrooms, motor pools, field environments, or live fire ranges, as appropriate.

2.1.1.2.2. Contract instructors must successfully complete the MCOE Instructor Training Course (ITC), and/or provide a certificate of completion from a Department of the Army recognized ITC.

2.1.1.2.3. Contract instructors must successfully complete a class check-out (dry run) conducted by Major Subordinate Command (MSC) cadre to be certified to train on soldiers.

2.1.1.2.4. Development of Instructional Material. As a Subject Matter Expert (SME) provide comments, lessons learned, and insights from classroom instruction, for use in the development of instructional materials. Provide input for course modification to education/training program personnel and administrators as a result of training sessions.

2.1.1.2.5. The Contractor personnel shall be qualified to perform duties as a range Officer In Charge (OIC) and/or Safety Officer (SO) consistent with MCOE regulations and policy. When serving in this role, they shall conduct range safety briefings to unit cadre.

2.1.2. The management portion of the SOWB shall describe the Contractor's approach to managing the new project requirements. The plan shall identify all Contractor and sub‑contractor key personnel, including the overall project manager, by name and qualifications (including experience with Army training in general, and task based training in particular). The management portion of the SOWB shall specify the approach for recruiting and maintaining highly qualified personnel. This plan shall include methods for managing the efforts of sub‑Contractors, procedures for coordination with the 192nd Infantry Brigade, 197th Infantry Brigade, 198th Infantry Brigade, 199th Infantry Brigade, 194th Armored Brigade, 16th Cavalry Regiment, and the Non-Commissioned Officers Academy (NCOA) to ensure that all classes are presented to standard and presented as scheduled.

2.1.3. The management portion of the SOWB shall describe the Contractor's quality assurance and surveillance approach for this project.

2.2. Task Area 2. The Contractor shall provide qualified instructors to support the 11B Initial Entry Training (IET) and One Station Unit Training (OSUT) Program of Instruction (POI).

2.2.1. Contractor shall instruct 11B IET/OSUT classes currently presented by the 192nd and 198th Infantry Brigades.

2.2.1.1. Typical hours of performance are between 0600 and 1800, Monday through Saturday not exceeding 80 hours in a two week pay period; however, instruction at field locations shall occasionally require extended hours. Time over 80 hours in a two week pay period requires prior COR approval.

2.2.1.2. Contract instructor shall be an 11B Advanced Leaders Course/Basic Non Commissioned Officer Course (ALC/BNCOC) graduate and have experience as a squad leader of an infantry platoon.

2.2.1.3. Contract instructors shall perform the following requirements:

2.2.1.3.1. Preparation for Instruction. Display a practical knowledge of instructor techniques and training classroom management.

2.2.1.3.2. Presentation of Instruction. Present instructions according to doctrine, lesson plans, or guidance from appropriate Government personnel. Contract instructors are required to train on tasks such as, but not limited to, those listed below:

· Protect Yourself from NBC Injury/Contamination When Changing Mission-Oriented Protective Posture (MOPP) Gear

· Engage Targets with an M16-Series Rifle Using an AN/PAQ-4-Series Aiming Light

· Mount an AN/PAS-13 Thermal Weapon Sight on a Caliber .50 M2 Machine Gun

· Dismount an AN/PAS-13 Thermal Weapon Sight from a Caliber .50 Machine Gun

· Zero an AN/PAS-13 Thermal Weapon Sight to a Caliber .50 M2 Machine Gun

· Engage Targets with a Caliber .50 M2 Machine Gun Using an AN/PAS-13 Thermal Weapon Sight

· Engage Targets with an MK 19 Machine Gun

· Load an MK 19 Machine Gun

· Unload an MK 19 Machine Gun

· Correct Malfunctions of an MK 19 Machine Gun

· Mount a Night Vision Sight, AN/TVS-5, on an MK 19 Machine Gun

· Dismount a Night Vision Sight, AN/TVS-5, from an MK 19 Machine Gun

· Engage Targets with an MK 19 Machine Gun Using a Night Vision Sight, AN/TVS-5

· Prepare an M136 Launcher for Firing

· Restore an M136 Launcher to Carrying Configuration

· Perform Misfire Procedures on an M136 Launcher

· Engage Targets with an M136 Launcher

· Zero an M4 or M4A1 Carbine

· Engage Targets with an M4 or M4A1 Carbine

· Maintain an M4 or M4A1 Carbine

· Perform a Function Check on an M4 or M4A1 Carbine

· Load an M4 or M4A1 Carbine

· Unload an M4 or M4A1 Carbine

· Correct Malfunctions of an M4 or M4A1 Carbine

· Mount an AN/PAQ-4-Series Aiming Light on an M4 or M4A1 Carbine

· Zero an AN/PAQ-4-Series Aiming Light to an M4 or M4A1 Carbine

· Engage Targets with an M16-Series Rifle

· Maintain an M16-Series Rifle

· Perform a Function Check on an M16-Series Rifle

· Load an M16-Series Rifle

· Unload an M16-Series Rifle

· Correct Malfunctions of an M16-Series Rifle

· Maintain an M203 Grenade Launcher

· Perform a Function Check on an M203 Grenade Launcher

· Load an M203 Grenade Launcher

· Unload an M203 Grenade Launcher

· Correct Malfunctions of an M203 Grenade Launcher

· Engage Targets with an M203 Grenade Launcher

· Engage Targets with a Caliber .50 M2 Machine Gun

· Perform Safety Checks on Hand Grenades

· Employ Hand Grenades

· Employ an M18A1 Claymore Mine

· Move as a Member of a Fire Team

· Move Under Direct Fire

· React to Indirect Fire While Dismounted

· Estimate Range

· Select Temporary Fighting Positions

· Perform Movement Techniques During an Urban Operation

· Enter a Building During an Urban Operation

· Prepare Positions for Individual and Crew-Served Weapons During an Urban Operation

· Select Hasty Firing Positions During an Urban Operation

· Use Visual Signaling Techniques

· React to Indirect Fire While Mounted

· Conduct a Tactical Road March

· Conduct Movement Techniques by a Squad

· Identify Topographic Symbols on a Military Map

· Identify Terrain Features on a Map

· Determine the Grid Coordinates of a Point on a Military Map

· Determine a Magnetic Azimuth Using a Lensatic Compass

· Navigate from One Point on the Ground to Another Point While Dismounted

· Measure Distance on a Map

· Convert Azimuths

· Orient a Map to the Ground by Map-Terrain Association

· Locate an Unknown Point on a Map and on the Ground by Resection

· Perform Surveillance without the Aid of Electronic Devices

· React to Direct Fire While Mounted

· Conduct Occupation of an Assembly Area

· Move as a Member of a Mortar Unit While Dismounted

· Conduct a Defense by a Squad

· Conduct a Defense by a Platoon

· Conduct an Attack on a Building by a Squad During an Urban Operation

· Conduct a Defense by a Squad During an Urban Operation

· Engage Targets During an Urban Operation

· Conduct a Breach During an Urban Operation

· Maintain an M68 Sight

· Operate an M68 Sight

· Zero an M68 Sight

· Boresight an M68 Sight

· Open the Airway

· Request Medical Evacuation

· Evaluate a Casualty

· Perform First Aid to Clear an Object Stuck in the Throat of a Conscious Casualty

· Perform First Aid to Prevent or Control Shock

· Perform First Aid for Burns

· Perform First Aid for Heat Injuries

· Perform First Aid for an Open Abdominal Wound

· Perform First Aid for an Open Chest Wound

· Perform First Aid for Bleeding of an Extremity

· Perform First Aid for an Open Head Wound

· Perform First Aid for a Suspected Fracture

· Perform Mouth-to-Mouth Resuscitation

· Perform First Aid for Nerve Agent Injury

· Perform First Aid for Cold Injuries

· Transport a Casualty

· Practice Individual Preventive Medicine Countermeasures

· Initiate an Intravenous Infusion

· Insert a Nasopharyngeal Airway

· Perform Needle Chest Decompression

· React to Unexploded Ordnance Hazards

· Perform Voice Communications

· Prepare SINCGARS (Manpack) for Operation

· Operate SINCGARS Single-Channel (SC)

· Comply With the Law of War and the Geneva and Hague Conventions

· Perform a Stand-Up Search or a Frisk (Pat-Down) Search

· Perform a Standing Search

· Perform a Prone Search

· Supervise the Establishment and Operation of a Roadblock/Checkpoint

· Handle Enemy Personnel and Equipment

· Interact With News Media

· Report Information of Potential Intelligence Value

· Prepare Vehicle for Tactical Operations

· Comply with the Army's Equal Opportunity and Sexual Harassment Policies

2.2.1.3.3. Act as secondary instructor to the overall classroom instructor by providing small group instruction help to students during practical exercise and hands-on portions of Training Support Package (TSP).

2.2.1.3.4. Set up classrooms with all materials necessary to conduct training in classroom, range or field site.

2.2.1.3.5. Conduct small arms ammunition break down and accountability on ranges.

2.2.1.3.6. Set up ranges prior to soldier arrival (i.e., target checks, fox hole inspection, target placement).

2.2.1.3.7. Operate range towers, giving all commands necessary to safely conduct training.

2.2.1.3.7.1. Safety. The Contractor personnel shall brief and point out to students, all safety procedures. The instructor shall monitor students during training to ensure compliance with safety procedures to prevent injury to personnel or damage to equipment.

2.3. Task Area 3. The Contractor shall provide qualified instructors to support the 11C Initial Entry Training (IET) and One Station Unit Training (OSUT) Program of Instruction (POI).

2.3.1. Contractor shall instruct 11C IET/OSUT classes currently presented by the 192nd and 198th Infantry Brigades.

2.3.1.1. Typical hours of performance are between 0600 and 1800, Monday through Saturday not exceeding 80 hours in a two week pay period; however, instruction at field locations shall occasionally require extended hours. Time over 80 hours in a two week pay period requires prior COR approval.

2.3.1.2. Contract instructor shall be an 11C Advanced Leaders Course /Basic Non Commissioned Officer Course (ALC/BNCOC) graduate and have experience as a squad leader in a mortar platoon.

2.3.1.3. Contract instructors shall perform the following requirements:

2.3.1.3.1. Preparation for Instruction. Display a practical knowledge of instructor techniques and training classroom management.

2.3.1.3.2 . Presentation of Instruction. Present instructions according to doctrine, lesson plans, or guidance from appropriate Government personnel. Contract instructors are required to train on tasks such as, but not limited to, those listed below:

· Protect Yourself From NBC Injury/Contamination When Changing Mission-Oriented Protective Posture (MOPP) Gear

· Protect Yourself From Chemical And Biological Injury/ Contamination Using Your M40-Series Protective Mask With Hood

· Decontaminate Your Skin Using the M291 Skin Decontaminating Kit (SDK)

· Decontaminate Your Individual Equipment Using the M295 Individual Equipment Decontamination Kit (IEDK)

· Identify Chemical Agents Using M256-Series Chemical Agent Detector Kit

· Conduct Unmasking Procedures

· Camouflage Yourself and Your Individual Equipment

· Install an M21 Antitank (AT) Mine

· Remove an M21 Antitank (AT) Mine

· Prime Explosives Nonelectrically

· Prime Military Explosives

· Determine Direction within the Target Area

· Maintain a Bayonet

· Engage Targets with an M16-Series Rifle Using an AN/PAQ-4-Series Aiming Light

· Mount a Night Vision Sight, AN/PVS-4, on an M249 Machine Gun

· Dismount a Night Vision Sight, AN/PVS-4, from an M249 Machine Gun

· Engage Targets with an M249 Machine Gun Using a Night Vision Sight, AN/PVS-4

· Mount an AN/PAS-13 Thermal Weapon Sight on a Caliber .50 M2 Machine Gun

· Dismount an AN/PAS-13 Thermal Weapon Sight from a Caliber .50 Machine Gun

· Zero an AN/PAS-13 Thermal Weapon Sight to a Caliber .50 M2 Machine Gun

· Engage Targets with a Caliber .50 M2 Machine Gun Using an AN/PAS-13 Thermal Weapon Sight

· Maintain an M240B Machine Gun

· Perform a Function Check on an M240B Machine Gun

· Load an M240B Machine Gun

· Unload an M240B Machine Gun

· Correct Malfunctions of an M240B Machine Gun

· Zero an M240B Machine Gun

· Engage Targets with an M240B Machine Gun

· Prepare a Range Card for an M240B Machine Gun

· Mount an M240B Machine Gun on an M122A1 Tripod

· Dismount an M240B Machine Gun from an M122A1 Tripod

· Mount an AN/PEQ-2A-Series Aiming Light on an M240B Machine Gun

· Dismount an AN/PEQ-2A-Series Aiming Light from an M240B Machine Gun

· Zero an AN/PEQ-2A-Series Aiming Light to an M240B Machine Gun

· Engage Targets with an M240B Machine Gun Using an AN/PEQ-2A-Series Aiming Light

· Engage Targets with an MK 19 Machine Gun

· Load an MK 19 Machine Gun

· Unload an MK 19 Machine Gun

· Correct Malfunctions of an MK 19 Machine Gun

· Mount a Night Vision Sight, AN/TVS-5, on an MK 19 Machine Gun

· Dismount a Night Vision Sight, AN/TVS-5, from an MK 19 Machine Gun

· Engage Targets with an MK 19 Machine Gun Using a Night Vision Sight, AN/TVS-5

· Prepare an M136 Launcher for Firing

· Restore an M136 Launcher to Carrying Configuration

· Perform Misfire Procedures on an M136 Launcher

· Engage Targets with an M136 Launcher

· Determine a Grid Azimuth Using an M2 Compass

· Engage Targets with a 60-mm, 81-mm, or 120-mm Mortar Using Direct Lay

· Refer and Realign Aiming Post

· Reciprocally Lay a Mortar Using an M2 Aiming Circle

· Emplace Aiming Posts

· Fire a Mortar

· Reciprocally Lay a Mortar Using a Laid Mortar

· Compute Data for a Polar Mission Using a Mortar Ballistic Computer

· Maintain a 60-mm Mortar

· Perform Misfire Procedures on a 60-mm Mortar While in the Handheld Mode

· Engage Targets with a 60-mm Mortar While Firing in the Handheld Mode

· Maintain an 81-mm Mortar

· Lay an 81-mm Mortar for Deflection and Elevation

· Perform Safety Checks on an M252 81-mm Mortar

· Perform Safety Checks on a 120-mm Mortar

· Lay a 120-mm Mortar for Deflection and Elevation

· Prepare 120-mm Mortar Ammunition for Firing

· Maintain a 120-mm Mortar

· Zero an M4 or M4A1 Carbine

· Engage Targets with an M4 or M4A1 Carbine

· Engage Targets with an M4 or M4A1 Carbine

· Maintain an M4 or M4A1 Carbine

· Maintain an M4 or M4A1 Carbine

· Perform a Function Check on an M4 or M4A1 Carbine

· Load an M4 or M4A1 Carbine

· Unload an M4 or M4A1 Carbine

· Correct Malfunctions of an M4 or M4A1 Carbine

· Mount an AN/PAQ-4-Series Aiming Light on an M4 or M4A1 Carbine

· Zero an AN/PAQ-4-Series Aiming Light to an M4 or M4A1 Carbine

· Engage Targets with an M16-Series Rifle

· Maintain an M16-Series Rifle

· Perform a Function Check on an M16-Series Rifle

· Load an M16-Series Rifle

· Unload an M16-Series Rifle

· Correct Malfunctions of an M16-Series Rifle

· Maintain an M203 Grenade Launcher

· Perform a Function Check on an M203 Grenade Launcher

· Load an M203 Grenade Launcher

· Unload an M203 Grenade Launcher

· Correct Malfunctions of an M203 Grenade Launcher

· Engage Targets with an M203 Grenade Launcher

· Lay an M249 Machine Gun Using Field Expedients

· Maintain an M249 Machine Gun

· Perform a Function Check on an M249 Machine Gun

· Load an M249 Machine Gun

· Unload an M249 Machine Gun

· Correct Malfunctions of an M249 Machine Gun

· Zero an M249 Machine Gun

· Engage Targets with a Caliber .50 M2 Machine Gun

· Operate Night Vision Goggles, AN/PVS-5

· Lay a Carrier-Mounted Mortar Using an M2 Compass

· Store Mortar Ammunition

· Lay a 60-mm Mortar for Deflection and Elevation

· Perform Safety Checks on a 60-mm Mortar

· Prepare 60-mm Mortar Ammunition for Firing

· Perform Safety Checks on Hand Grenades

· Employ Hand Grenades

· Employ an M18A1 Claymore Mine

· Recover an M18A1 Claymore Mine

· Identify Improvised Explosive Devices

· Engage an Enemy with a Bayonet

· Move as a Member of a Fire Team

· Move Under Direct Fire

· Move Over, Through, or Around Obstacles (Except Minefields)

· React to Indirect Fire While Dismounted

· Estimate Range

· Select Temporary Fighting Positions

· Perform Movement Techniques During an Urban Operation

· Enter a Building During an Urban Operation

· Prepare Positions for Individual and Crew-Served Weapons During an Urban Operation

· Select Hasty Firing Positions During an Urban Operation

· Use Visual Signaling Techniques

· React to Indirect Fire While Mounted

· Conduct a Tactical Road March

· Conduct Troop-Leading Procedures for an Operation

· Identify Topographic Symbols on a Military Map

· Identify Terrain Features on a Map

· Determine the Grid Coordinates of a Point on a Military Map

· Determine a Magnetic Azimuth Using a Lensatic Compass

· Determine the Elevation of a Point on the Ground Using a Map

· Determine a Location on the Ground by Terrain Association

· Navigate from One Point on the Ground to Another Point While Dismounted

· Measure Distance on a Map

· Convert Azimuths

· Orient a Map to the Ground by Map-Terrain Association

· Locate an Unknown Point on a Map and on the Ground by Resection

· Perform Surveillance without the Aid of Electronic Devices

· Perform Duty as a Guard

· React to Direct Fire While Mounted

· Conduct Occupation of an Assembly Area

· Move as a Member of a Mortar Unit While Dismounted

· Conduct an Attack on a Building by a Squad During an Urban Operation

· Conduct a Defense by a Squad During an Urban Operation

· Engage Targets During an Urban Operation

· Conduct a Breach During an Urban Operation

· Maintain an M68 Sight

· Operate an M68 Sight

· Zero an M68 Sight

· Boresight an M68 Sight

· Open the Airway

· Request Medical Evacuation

· Evaluate a Casualty

· Perform First Aid to Clear an Object Stuck in the Throat of a Conscious Casualty

· Perform First Aid to Prevent or Control Shock

· Perform First Aid for Burns

· Perform First Aid for an Open Chest Wound

· Perform First Aid for Bleeding of an Extremity

· Perform First Aid for a Suspected Fracture

· Perform Mouth-to-Mouth Resuscitation

· Perform First Aid for Nerve Agent Injury

· Transport a Casualty

· Practice Individual Preventive Medicine Countermeasures

· Insert a Nasopharyngeal Airway

· Perform Needle Chest Decompression

· Identify Unexploded Ordnance (UXO) Hazards

· React to Unexploded Ordnance Hazards

· Recognize Military Explosive Ordnance by Type

· Report Explosive Hazard

· Perform Voice Communications

· Prepare SINCGARS (Manpack) for Operation

· Comply With the Uniform Code of Military Justice (UCMJ)

· Process Enemy Prisoners of War (EPWs) and/or Civilian Internees (CIs) at a Collecting Point or Holding Area

· Prepare Department of the Army (DA) Form 4137

· Report Information of Potential Intelligence Value

· Prepare Vehicle for Tactical Operations

· Comply with the Army's Equal Opportunity and Sexual Harassment Policies

· Employ Accident Prevention Measures and Risk Management Process

2.3.1.3.3. Act as secondary instructor to the overall classroom instructor by providing small group instruction help to students during practical exercise and hands-on portions of Training Support Package.

2.3.1.3.4. Set up classrooms with all materials necessary to conduct training in classroom, range or field site.

2.3.1.3.5. Conduct small arms ammunition break down and accountability on ranges.

2.3.1.3.6. Set up ranges prior to soldier arrival (i.e., target checks, fox hole inspection, target placement).

2.3.1.3.7. Operate range towers, giving all commands necessary to safely conduct training.

2.3.1.3.8. Safety. The Contractor personnel shall brief and point out to students, all safety procedures. The instructor shall monitor students during training to ensure compliance with safety procedures to prevent injury to personnel or damage to equipment.

2.4. Task Area 4. The Contractor shall provide qualified instructors to support the 19D Initial Entry Training (IET) and One Station Unit Training (OSUT) Program of Instruction (POI).

2.4.1. Contractor shall instruct 19D IET/OSUT classes currently presented by the 194th Armored Brigade (194th AB).

2.4.1.1. Typical hours of performance are between 0600 and 1800, Monday through Saturday not exceeding 80 hours in a two week pay period; however, instruction at field locations shall occasionally require extended hours. Time over 80 hours in a two week pay period requires prior COR approval.

2.4.1.2. Contract instructor shall be a 19D Advanced Leaders Course Basic Non Commissioned Officer Course (ALC/BNCOC) graduate and have experience as a squad leader on a Bradley Fighting Vehicle (BFV) or High Mobility Multipurpose Wheeled Vehicle (HMMWV) or STRYKER.

2.4.1.3. Contract instructors shall perform the following requirements:

2.4.1.3.1. Preparation for Instruction. Display a practical knowledge of instructor techniques and training classroom management.

2.4.1.3.2 Presentation of Instruction. Present instructions according to doctrine, lesson plans, or guidance from appropriate Government personnel. Contract instructors are required to train on tasks such as, but not limited to, those listed below:

· Maintain Operators part of Equipment Record Folder

· Start/Stop the Engine and Secure a BFV

· Perform Emergency Evacuation Procedures on a BFV

· Extinguish a Fire on a BFV

· Operate the Chemical, Biological, Radiological and Nuclear (CBRN) System on a BFV

· Drive a BFV in daylight and using Night Vision Equipment

· Recover a Mired Tracked Vehicle using similar vehicles and Tow Cable

· Tow/Tow Start a BFV

· Perform Preventive Maintenance Checks & Services (PMCS) on the Hull of a BFV

· Stow Ammunition and Equipment on a BFV

· Load/Unload 25MM Ready Boxes on a BFV

· Install/Remove an M240C Machine Gun on a BFV

· Load/Unload a TOW Launcher on a BFV

· Perform Operators Maintenance on a 25MM Automatic Gun

· Maintain, Load/Unload the M257 Grenade Launcher on a BFV

· Engage Targets with the M240C Coaxial Machine Gun and 25MM Automatic Gun on a BFV

· All phases of Rifle Marksmanship

· Operate Automated Net Control Device (ANCD)

· Operate SINCGARS Radio

· Basic Military Communication

· Evaluate a Casualty and apply Life Saving Treatments

· First Aid (Treatment for Burns)

· Preventive Medicine

· Maintain an M42A2 / M42A1 Protective Mask

· Put On, Wear, Remove and Store your Protective Mask

· Chemical, Biological, Radiological and Nuclear Defense

· Exchange Military Oriented Protective Posture (MOPP) Gear

· Introduction to Rifle Marksmanship and Mechanical Training

· Fundamentals of Rifle Marksmanship and Engagement Skills Trainer (EST)

· Grouping Procedures

· Zero an M16A2 Rifle

· Obtain Down Range Feedback

· Field Fire

· Practice Record Fire

· Record Fire

· Land Navigation

2.4.1.3.3. Maintenance of Equipment. Display the ability to perform the functions of operator level maintenance to include, troubleshooting of the BFV, recognizing malfunctions and taking minor corrective.

2.4.1.3.4. Safety. Brief and point out to students all aspects of BFV (and related equipment) safety features and procedures and monitor students during training to ensure compliance with safety procedures to prevent injury to personnel and damage to equipment.

2.4.1.3.5. Act as secondary instructor to the overall classroom instructor by providing small group instruction help to students during practical exercise and hands-on portions of Training Support Package (TSP).

2.4.1.3.6. Set up classrooms with all materials necessary to conduct training in classroom, range or field site.

2.4.1.3.7. Conduct small arms ammunition break down and accountability on ranges.

2.4.1.3.8. Set up ranges prior to soldier arrival, i.e., target checks, fox hole inspection, target placement.

2.4.1.3.9. Operate range towers, giving all commands necessary to safely conduct training.

2.4.1.3.10. Some instructors in this task area may be utilized to operate vehicle simulators. When instructing in this capacity, they shall follow Government provided lesson plans. When instructing in this capacity the instructors shall serve as a Small Group Instructor (SGI) for instructing driving techniques with varied terrain, weather, visibility, conditions, as well as selected malfunctions and emergency situations. The instructor shall be responsibility of presenting blocks of short-term progressive segments of instructions to military vehicle drivers. Instruction shall include a practical explanation, demonstration and supervision of practical exercises, which provide the student with the knowledge required to perform the duties as driver of the simulated vehicle. The instructor shall utilizes a practical knowledge of technical fields required to operate the trainer such as electronics, computers, optics, maintenance and proper driving techniques as well as a practical knowledge of the methods and techniques of instruction. The instructor shall identify driver difficulties/deficiencies, and using lesson plans and practical knowledge, shall determine proper remedial training steps and procedures to correct student deficiencies.

2.4.1.3.11.1. Maintenance of Equipment. The Contractor personnel shall possess the ability to perform the functions of operator level maintenance to include, troubleshooting of the trainers, recognizing malfunctions, and taking minor corrective actions such as resetting circuit breakers, and replacement of circuit boards. Instructors shall perform daily readiness checks using diagnostic Built in Test Equipment (BITE). As part of their check-out to be a simulator instructor, the instructor shall develop a working knowledge of Driver Trainer instructor/operator handbook, Simulator Operator’s manual and/or related documents.

2.4.1.3.10.2. Safety. The Contractor personnel shall brief and point out to students, all aspects of motion system safety features and procedures. Students shall be briefed on all emergency stops, emergency egress procedures, general simulator safety scheme, fire alarms, evacuation plans, and assembly areas. The instructor shall monitor students during training to ensure compliance with safety procedures to prevent injury to personnel or damage to equipment.

2.5. Task Area 5: The Contractor shall provide qualified instructors to support the 19K Initial Entry Training (IET) and One Station Unit Training (OSUT) Program of Instruction (POI).

2.5.1. Contractor shall instruct 19K IET/OSUT classes currently presented by the 194th Armored Brigade (194th AB).

2.5.1.1. Typical hours of performance are between 0600 and 1800, Monday through Saturday not exceeding 80 hours in a two week pay period; however, instruction at field locations may occasionally require extended hours. Time over 80 hours in a two week pay period requires prior COR approval.

2.5.1.2. Contract instructor shall be a 19K Advanced Leaders Course/ Basic Non Commissioned Officer Course (ALC/BNCOC)graduate and have experience as an Abrams Tank Commander, or section leader.

2.5.1.3. Contract instructors shall perform the following requirements:

2.5.1.3.1. Preparation for Instruction. Display a practical knowledge of instructor techniques and training classroom management.

2.5.1.3.2. Presentation of Instruction. Present instructions according to doctrine, lesson plans, or guidance from appropriate Government personnel. Contract instructors are required to train on tasks such as, but not limited to, those listed below:

· Maintain Operators part of Equipment Record Folder.

· Start/Stop the Engine on an M1A1/AIM-ED/A2 SEP Tank.

· Perform Emergency Evacuation Procedures on a M1A1/AIM-ED/A2 Tank.

· Extinguish a Fire on a M1A1/AIM-ED/A2 Tank.

· Drive a M1A1/AIM-ED/A2 Tank in daylight and using Night Vision Equipment.

· Tow a M1A /AIM-ED/A2 Tank.

· Perform Preventive Maintenance Checks & Services on the Hull of a M1A1 Tank.

· Stow Ammunition on an M1A1 Tank.

· Load/Unload the 120MM Main Gun on an M1A1 Tank.

· Install/Remove an M240C Machine Gun on a M1A1 Tank.

· Clean and Service the 120MM Main Gun on an M1A1 Tank.

· Engage Targets with the M240C Coaxial Machine Gun and 120MM Main Gun on a M1A1/AIM/-ED/A2 Tank.

· All phases of Rifle Marksmanship.

· Operate Automated Net Control Device (ANCD).

· Operate SINCGARS Radio.

· Basic Military Communication.

· Evaluate a Casualty and apply Life Saving Treatments.

· First Aid (Treatment for Burns).

· Preventive Medicine.

· Maintain an M42A2 /M42A 1 Protective Mask.

· Put On, Wear, Remove and Store your Protective Mask.

· Chemical, Biological, Radiological and Nuclear Defense.

· Exchange MOPP Gear.

· Introduction to Rifle Marksmanship and Mechanical Training.

· Fundamentals of Rifle Marksmanship and Engagement Skills Trainer (EST).

· Grouping Procedures .Zero an M4 Carbine.

· Obtain Down Range Feedback.

· Field Fire.

· Practice Record Fire.

· Record Fire.

· Land Navigation

· Operate the Tank Driver Simulator (Government provided instruction/refresher training may be required for Contractor personnel)

2.5.1.3.3. Maintenance of Equipment. Display the ability to perform the functions of operator level maintenance to include, troubleshooting of the Abrams, recognizing malfunctions and taking minor corrective.

2.5.1.3.4. Safety. Brief and point out to students all aspects of Abrams, (and related equipment) safety features and procedures and monitor students during training to ensure compliance with safety procedures to prevent injury to personnel and damage to equipment.

2.5.1.3.5. Act as secondary instructor to the overall classroom instructor by providing small group instruction help to students during practical exercise and hands-on portions of training support package (TSP).

2.5.1.3.6. Set up classrooms with all materials necessary to conduct training in classroom, range or field site.

2.5.1.3.7. Conduct small arms ammunition break down and accountability on ranges.

2.5.1.3.8 Set up ranges prior to soldier arrival, i.e., target checks, fox hole inspection, target placement.

2.5.1.3.9. Operate range towers, giving all commands necessary to safely conduct training.

2.5.1.3.10. Some instructors in this task area may be utilized to operate vehicle simulators. When instructing in this capacity, they shall follow Government provided lesson plans. When instructing in this capacity the instructors shall serve as a Small Group Instructor (SGI) for instructing driving techniques with varied terrain, weather, visibility, conditions, as well as selected malfunctions and emergency situations. The instructor shall be responsibility of presenting blocks of short-term progressive segments of instructions to military vehicle drivers. Instruction shall include a practical explanation, demonstration and supervision of practical exercises, which provide the student with the knowledge required to perform the duties as driver of the simulated vehicle. The instructor shall utilizes a practical knowledge of technical fields required to operate the trainer such as electronics, computers, optics, maintenance and proper driving techniques as well as a practical knowledge of the methods and techniques of instruction. The instructor shall identify driver difficulties/deficiencies, and using lesson plans and practical knowledge, shall determine proper remedial training steps and procedures to correct student deficiencies.

2.5.1.3.11. Maintenance of Equipment. The Contractor personnel shall possess the ability to perform the functions of operator level maintenance to include, troubleshooting of the trainers, recognizing malfunctions, and taking minor corrective actions such as resetting circuit breakers, and replacement of circuit boards. Instructors shall perform daily readiness checks using diagnostic Built in Test Equipment (BITE). As part of their check-out to be a simulator instructor, the instructor shall develop a working knowledge of Driver Trainer instructor/operator handbook, Simulator Operator’s manual and/or related documents.

2.5.1.3.11.2. Safety. The Contractor personnel shall brief and point out to students, all aspects of motion system safety features and procedures. Students shall be briefed on all emergency stops, emergency egress procedures, general simulator safety scheme, fire alarms, evacuation plans, and assembly areas. The instructor shall monitor students during training to ensure compliance with safety procedures to prevent injury to personnel or damage to equipment.

2.6. Task Area 6: The Contractor shall provide qualified instructors to support the MCOE M1/M1A1/M1A2 Abrams series tank Master Gunner program of instruction.

2.6.1. Typical Master Gunner Course hours of performance are between 0600 and 1800, Monday through Saturday not exceeding 80 hours in a two week pay period; however, instruction at field locations may occasionally require extended hours. Time over 80 hours in a two week pay period requires prior COR approval. The exception to this is that the Government initially will provide eight hundred (800) hours overtime allocate among the instructors, as required.

2.6.2. Instruction shall normally take place in the motor pool, classroom and field environments at the MCOE although some travel to teach classes at other CONUS locations may be required in support of unit Mobile Training Teams (MTT’s) (see para 6.5).

2.6.3. The Master Gunner contract instructor shall be a qualified M1 M1A1/M1A2 Abrams series tank Master Gunner. Active duty Master Gunner Course instructor experience is preferred.

2.6.4. Instructors in the Master Gunner Course are required to train on tasks such as, but not limited to, those listed below:

· Tank Safety

· Target Acquisition & M1 M1A1/M1A2 Abrams series tank Conduct Of Fire

· Armored Fighting Vehicle Identification And Capabilities

· Tank Ammunition

· M240 Tank Machine and M2 Caliber .50 HB Machine Gun

· Tank Gun Capabilities and Firing Tables (120MM)

· Plan/Conduct Tank Gunnery Tables

· Surface Danger Area Diagrams

· Administer Tank Crew Gunnery Skills Test(TCGST)

· Range Determination

· Advanced Conduct of Fire (ACOF)

· Training Devices (TWGSS Certification)

· Prepare to Fire (M1 Abrams series tank)

· Master Gunner Tank Range Training

· Supervise COFT Program

· Gunnery Training Management

2.6.5. Maintenance of Equipment. Display the ability to perform the functions of operator level maintenance to include, troubleshooting of the M1 Abrams series tank, recognizing malfunctions and taking minor corrective. The contract instructor must be physically able to perform all the technical manual tasks required of a M1 Abrams series tank instructor, and/or tank crewman including PMCS procedures and –10 technical manual corrective actions on an M1/M1A1/M1A2 Abrams series tank.

2.6.6. Safety. Briefs and points out to students, all safety features and procedures. Students shall be briefed on all emergency stops, emergency egress procedures, general simulator safety scheme, fire alarms, evacuation plans and assembly areas. Instructor monitors students during training to insure compliance with safety procedures to prevent injury to personnel and damage to equipment.

2.6.7. Master Gunner course instructor(s) supporting Tank Commander’s Course (TC2) instruction shall be proficient on M1/M1A1/M1A2 Abrams series tank. Instructors supporting TC2 are required to train on tasks such as, but not limited to, those listed below:

· Respond To Depleted Uranium (DU)

· Set Headspace and Timing on a Caliber .50 M2 Machine Gun

· Load/Unload and Perform Operator Maintenance M240/M240C Machine Gun on an M1 Abrams series tank

· Load/Unload and Perform Operator Maintenance On A Caliber .50 Browning M2 HB M48 TT Machine Gun on an M1 Abrams series tank

· Zero a Caliber .50 M2 HB Machine and M240C Machine Gun on an M1 Abrams series tank

· Engage Targets with the M240 Coax Machine Gun and Caliber .50 M2 HB Machine Gun on an M1 Abrams series tank

· Start/Stop and Slave Start the Engine on an M1 Abrams series tank

· Prepare the Crew Stations for Operation and Secure Crew Stations on an M1 Abrams series tank

· Evacuate a Wounded Crewman from an M1 Abrams series tank

· Extinguish a Fire on an Abrams series tank

· Boresight the Abrams series tank

· Load/Unload and Stow Ammunition on an Abrams series tank

· Perform Operator Maintenance on the 120-MM Breechblock Assembly on an M1 Abrams series tank

· Perform Crew After-Operation Checks and Services on an Abrams series tank

· Conduct A Bustle Hit Drill and Evacuation Drill on an M1 Abrams series tank

· Conduct Armament Accuracy Checks and Screening Tests on an Abrams series tank

· Direct Main Gun Engagements and Engage Targets on an Abrams series tank

· Install/Remove an M240 Machine Gun in the Commander's Weapon Mount on an M1 Abrams series tank

· Mount/Dismount a Caliber .50 Browning M2 HB M48 TT Machine Gun on an M1 Abrams series tank

· Perform Main Gun Misfire Procedures on an Abrams series tank

· Perform Operator Maintenance on a Caliber .50 Browning M2 HB Flex Machine Gun on an M1 Abrams series tank

· Develop a Semi-Annual or Quarterly Gunnery Training Program

· Perform Detailed Disassembly/Assembly of the M240 Machine Gun, M2 HB Machine Gun, and M2 Flex Machine Gun

· Identify Main Gun and Small Arms Ammunition

· Perform Plumb and Synchronization on an Abrams series tank Fire Control System

· Prepare/Send Combat Messages Using FBCB2 Version 3.5.51

· Place The Enhanced Position Locating Reporting System (EPLRS) on an M1A2

· SEP Tank into operation

· Operate Commander's Independent Thermal Viewer (CITV) on an M1A2 SEP Tank

· Prepare FBCB2 for Operation on an Abrams series tank

· Apply the Detect, Identify, Decide, Engage, And Assess (DIDEA) Process to Combat Identification (CID)

· Perform Preventive Maintenance Checks

2.7. Task Area 7: The Contractor shall provide qualified instructors to support the MCOE BFV System Master Gunner Course.

2.7.1. Typical Master Gunner Course hours of performance are between 0600 and 1800, Monday through Saturday not exceeding 80 hours in a two week pay period; however, instruction at field locations may occasionally require extended hours. Time over 80 hours in a two week pay period requires prior COR approval. The exception to this is that the Government initially will provide eight hundred (800) hours overtime allocate among the instructors, as required.

2.7.2. Instruction shall normally take place in the motor pool, classroom and field environments at the MCOE although some travel to teach classes at other CONUS locations may be required in support of unit Mobile Training Teams (MTT’s) (see para 6.5).

2.7.3. The Master Gunner contract instructor shall be a qualified BFV System Master Gunner. Active duty Master Gunner Course instructor experience is preferred.

2.7.4. Instructors in the Master Gunner Course are required to train on subject areas such as, but not limited to, those listed below:

· Turret Operations

· Weapon System Training

· Training Devices

· Crew Gunnery Training

· Advanced Gunnery Training

2.7.5. Maintenance of Equipment. Display the ability to perform the functions of operator level maintenance to include, troubleshooting of the BFV, recognizing malfunctions and taking minor corrective. The contract instructor must be physically able to perform all the technical manual tasks required of a BFV instructor, and/or crewman including PMCS procedures and –10 technical manual corrective actions on a BFV.

2.7.6. Safety. Briefs and points out to students, all safety features and procedures. Students shall be briefed on all emergency stops, emergency egress procedures, general simulator safety scheme, fire alarms, evacuation plans and assembly areas. Instructor monitors students during training to insure compliance with safety procedures to prevent injury to personnel and damage to equipment.

2.8. Task Area 8. The Contractor shall provide qualified instructors to support the Infantryman Advanced Leaders Course (ALC) , Maneuver Senior Leader Course (MSLC), and Warrior Leader Course (WLC).

2.8.1. Contractor shall instruct ALC in the motor pool, classroom and field environments at the MCOE although some travel to teach classes at other CONUS locations may be required in support of unit MTT’s (see para 6.5) as specified by the Government in class schedules, training schedules, or teaching assignments.

2.8.1.1. Typical hours of performance are between 0600 and 1800, Monday through Saturday not exceeding 80 hours in a two week pay period; however, instruction at field locations may occasionally require extended hours. Time over 80 hours in a two week pay period requires prior COR approval.

2.8.1.2. Contract instructor shall be an Infantry Maneuver Senior Leader Course/Infantry Advanced Non Commissioned Officer Course (MSLC/ANCOC) graduate and have experience as an Infantry platoon sergeant.

2.8.1.3 Instruction for ALC, MSLC and the Warrior Leader Course (WLC) shall train tasks such as, but not limited to, those listed below:

· Implement Measures to Reduce Combat Stress

· Motivate Subordinates to Improve Performance

· Counsel/Develop Subordinates

· Conduct a Military Briefing

· The Risk Management Process

· Enforce the Equal Opportunity Program

· NCOER - Rater and Senior Rater Qualifications / Responsibilities

· Plan a Non-tactical Unit Movement

· Training Management

· Train a Squad

· Graphics and Overlays

· Plans, Orders, and Annexes

· CBRN Operations

· Intelligence and Electronic Warfare (IEW) Operations

· Troop Leading Procedures

· Squad Tactical Operations

· Unexploded Ordinance

· Scout Organizations and Missions

· Training Safety

· Combating Terrorism

· Employ Vehicular/Organic Smoke

· Conduct Tactical Operations

· Take Charge of a Platoon

· Motivate Subordinates to Accomplish Unit Mission

· Apply the Ethical Decision-Making Method at Small Unit Level

· Develop a Cohesive Platoon-Sized Organization

· Communicate Effectively as a Leader, both orally and in writing

· Implement a Total Fitness Program In a Platoon

· Establish Organizational Field Sanitation

· Conduct Combat Service Support Operations for a Platoon

· Conduct Maintenance Operations For a Platoon

· Stress Management

· Conduct Search and Seizure

· Coordinate Platoon Deployment Readiness Activities

· Enforce the Equal Opportunity Program

· Training Management in a Platoon

· Preparing a Standing Operating Procedure

· Plans, Orders, and Annexes

· Platoon Operations in an CBRN Environment

· Platoon Tactical Operations

· Brigade Reconnaissance Troop

· Maintain Property Accountability

· Introduction to the Small Group Process

· Supervise Platoon Maintenance Program

2.9. Task Area 9. The Contractor shall provide qualified instructors to support the Armor Crewman Advanced Leaders Course (ALC), Maneuver Senior Leader Course (MSLC), and Warrior Leader Course (WLC).

2.9.1. Contractor shall instruct ALC, MSLC, and Warrior Leader Course (WLC) in the motor pool, classroom and field environments at the MCOE although some travel to teach classes at other CONUS locations may be required in support of unit MTT’s (see para 6.5) as specified by the Government in class schedules, training schedules, or teaching assignments.

2.9.1.1. Typical hours of performance are between 0600 and 1800, Monday through Saturday not exceeding 80 hours in a two week pay period; however, instruction at field locations may occasionally require extended hours. Time over 80 hours in a two week pay period requires prior COR approval.

2.9.1.2. Contract instructor shall be an Armor Crewman ALC or Armor Advanced Non Commissioned Officer Course (ANCOC) graduate and have experience as a tank platoon sergeant, preferably with a M1A2 Abrams Tank equipped organization.

2.9.1.3 Instruction for ALC, MSLC and the Warrior Leader Course (WLC) shall train tasks such as, but not limited to, those listed below:

· Implement Measures to Reduce Combat Stress

· Motivate Subordinates to Improve Performance

· Counsel/Develop Subordinates

· Conduct a Military Briefing

· The Risk Management Process

· Enforce the Equal Opportunity Program

· NCOER - Rater and Senior Rater Qualifications / Responsibilities

· Plan a Non-tactical Unit Movement

· Training Management

· Train a Squad

· Graphics and Overlays

· Plans, Orders, and Annexes

· CBRN Operations

· Intelligence and Electronic Warfare (IEW) Operations

· Troop Leading Procedures

· Squad Tactical Operations

· Unexploded Ordinance

· Scout Organizations and Missions

· Training Safety

· Combating Terrorism

· Employ Vehicular/Organic Smoke

· Conduct Tactical Operations

· Take Charge of a Platoon

· Motivate Subordinates to Accomplish Unit Mission

· Apply the Ethical Decision-Making Method at Small Unit Level

· Develop a Cohesive Platoon-Sized Organization

· Communicate Effectively as a Leader, both orally and in writing

· Implement a Total Fitness Program In a Platoon

· Establish Organizational Field Sanitation

· Conduct Combat Service Support Operations for a Platoon

· Conduct Maintenance Operations For a Platoon

· Stress Management

· Conduct Search and Seizure

· Coordinate Platoon Deployment Readiness Activities

· Enforce the Equal Opportunity Program

· Training Management in a Platoon

· Preparing a Standing Operating Procedure

· Plans, Orders, and Annexes

· Platoon Operations in an CBRN Environment

· Platoon Tactical Operations

· Brigade Reconnaissance Troop

· Maintain Property Accountability

· Introduction to the Small Group Process

· Supervise Platoon Maintenance Program

2.7. Task Area 7. The Contractor shall provide qualified instructors to support Mounted Basic Officer Leadership Course (BOLC-B) instruction.

2.7.1. Contractor shall instruct Basic Officer Leadership Course (BOLC-B) training classes currently presented by the 16 Cavalry Regiment (16th Cav).

2.7.1.1. Contract instructor qualifications.

2.7.1.1.1. Fourteen (14) instructors shall be 19K MSLC graduate or have experience as a platoon sergeant on an Abrams tank. Instruction shall take place in motor pool, classroom, and field environments (including live fire ranges) at the MCOE, and shall require repeated ingress/egress of combat vehicles peculiar to the class being taught, in the prevailing weather conditions for outdoor classes. Portions of these classes shall require rigorous physical activity on a repetitive basis.

2.7.1.1.2. Eleven (11) instructors shall be a 19D MSLC graduate or have experience as a Cavalry/Scout platoon sergeant, preferably with a HMMWV or Bradley equipped organization. Instruction shall take place in motor pool, classroom, and field environments (including live fire ranges) at the MCOE, and shall require repeated ingress/egress of combat vehicles peculiar to the class being taught, in the prevailing weather conditions for outdoor classes. Portions of these classes shall require rigorous physical activity on a repetitive basis.

2.7.1.2. Typical hours of performance are between 0600 and 1800, Monday through Sunday not exceeding 96 hours in a two week pay period; however, instruction at field locations may occasionally require extended hours. Time over 96 hours in a two week pay period requires prior COR approval. Note – the Government is amenable to the Contractor hiring 30 personnel working on an 80 hour pay two week period, as a means to mitigate attrition and instructor burnout factors. Regardless of the methodology used, the total hours in support of this task will not exceed 57,600, and that unit teaching requirements must be met.

2.7.1.3. Contract instructor shall be an Armor/Cavalry Crewman ALC or Armor/Cavalry Advanced Non Commissioned Officer Course (ANCOC) graduate and have experience as a tank/Bradley/HMMWV/Stryker platoon sergeant.

2.7.1.4. Contract instructors shall perform the following requirements:

2.7.1.4.1. Preparation for Instruction. Display a practical knowledge of instructor techniques and training classroom management.

2.7.1.4.2. The Presentation of Instruction. Present instructions according to doctrine and training support packages (TSP). 19D contract instructors are required to train on tasks such as those listed in paragraph 2.2.1.3.2, in addition to the common leader tasks listed below. The 19K contract instructors are required to train on tasks such as those listed in paragraph 2.3.1.3.2, in addition to the common leader tasks listed below.

· All tasks associated with M2 and M240 machineguns

· Abrams Preventative Maintenance Checks and Services

· All Abrams crew station training tasks

· All Abrams turret armament controls and equipment tasks

· All…