W911YP-12-B-0001_Conformed_Solicitation_Amendment_004.doc

Section SF 30 - BLOCK 14 CONTINUATION PAGE

AMENDMENT 003

5. Questions concerning Sheet C-050 and the salvaging of existing control tower and elevated firing positions, then moving these structures to another location on UTARNG. Will re-assembly in the new location be required? If re-assembly is required what foundation work is required?

Answer: The components will be stockpiled at a located designated by the UTARNG. They will not be re-assembled. – Note Pictures of structures are attached as a separate document.

6. Bid Opening location has been changed to: Camp Williams Training Site, 17800 South Camp Williams Road (Redwood Road), Building 7161, CampWilliams, Utah. Map is attached as a separate document.

7. Bid Opening date remains at September 25, 2012 at 2:00 p.m. Mountain Standard Time.

8. No other changes are to be made at this time.

AMENDMENT 004

CONTINUED:

CLINS 0008 and 0009 are maximum estimated quantities that shall NOT be exceeded without authority of the Contracting Officer per FAR Clause 52.211-18, Variation in Estimated Quantities. Contractor will be paid only for quantities used..

3. No other changes are to be made at this time.

AMENDMENT 002

4. CAD drawings were requested for the earthwork section of the project. They have been distributed at the Site visit. If additional copies are needed, contact the Contracting Officer.

5. Bid opening is rescheduled for 25 September 2012 at 2:00 p.m. MST. Location remains at Camp Williams Training Site, 17800 South Camp Williams Road (Redwood Road), Building 8000, Camp Williams, Utah.

6. Questions and answers are a separate attachment.

7. No other changes at this time.

QUESTIONS AND ANSWERS 002

Answers to Some of the Questions submitted are as follows:

4. Will background checks be required for workers?

Answer: Since this is a Federal Facility, please ensure you have workers who are not illegial workers. The Department of Immigration does visit the site periodically.

5. Please clarify if this project is going to be a LEED project or not.

Answer: This project is not a LEED project. Ignore all LEED requirements.

6. Under section 012900 paragraph L sentence 12, it states that on the initial pay application we need to submit “copies of building permits”. Please advise whether we need to submit and file for a building permit on this project.

Answer: Since this project is located on Federal property, no building permit is required.

7. It looks like the actual targets and target apparatuses are not going to be part of the contract and will be provided by the Government at a later date. Are we just to provide means for them to tie into later. Please confirm this.

Answer: The actual targets and target apparatuses will be provided by the Government. More information will follow.

Section 00010 - Solicitation Contract Form

TABLE OF CONTENTS

TABLE OF CONTENTS

SOLICITATION, OFFER, AND AWARD SF 1442 AND SF1442 BACK

SECTION 00010 – BID SCHEDULE, NOTES

SECTION 00100 – INSTRUCTIONS, CONDITIONS ANDD NOTICES TO OFFERORS

SECTION 00600 – REPRESENTATIONS & CERTIFICATIONS

SECTION 00700 – CONTRACT CLAUSES

SECTION 00800 – SPECIAL CONTRACT REQUIREMENTS

ATTACHMENT 1 – PLANS AND SPECIFICATIONS - Project #490618, Dated

ATTACHMENT 2 – WAGE DETERMINATION(S) – to be inserted at award. See section 00100 for solicitation.

ATTACHMENT 3 – SOLICITATION QUESTIONS AND ANSWERS DOCUMENT, Dated

Eight Lane Multi Purpose Machine Gun

FFP

Range (MPMG) Facility.

MPMG Lanes 1-5:

The two man fighting position will be provided at each 25 meter wide lane. Each lane will be 80 meter wide at a distance of 800 meters from the firing line and each lane will total 800 meters in length. These lanes will allow the UTARNG to train with M60 MG, M240B MG, M249 SAW and M249 AR. Use of the 7.62 mm M118 Special projectile will be prohibited in these lanes. Standard training for the SAW requires that each target within the 800 meter array must be capable of being activated independently of, or simultaneously with the other targets in the array.

MPMG Lanes 6-8

A two-man fighting position will be provided at each 25 meter wide lane. Each lane will be 100 meters wide at a distance of 800 meters from the firing line. Lanes 6 through 8 extend beyond the standard 1,500 meter length of these lanes, for an additional 1,000 meters equalling a total lane length of 2,500 meters to accommodate Heavy Sniper capability on these lanes. These lanes will allow the UTRNG to train with the M60 MG, M240B MG, M240 SAW, M249 AR, M2 MG, Mk-19 MG (40mm TP), and the M24 Sniper Rifle. Standard training for the SAW requires each target within the 800 meter array must be capable of being activated independently of, or simultaneously with the other targets in the array. Two additional SITs are placed at approximately 2,300 meters to accommodate Heavy Sniper capability. Heavy Sniper capability on Lanes 6 through 8 is included as an approved Exception to Criteria through NGB-TRS.

Fighting Positions:

A two-man fighting position will be provided at each 5 meter wide lane. The fighting positions will be on slightly elevated ground and designated with numbered markers. Positions will accommodate firing from standing positions, kneeling positions, and prone position on the surrounding berm. The berms are designed to allow HUMVEEs and other military vehicles to drive into the fighting station area and fire downrange.

See Scope of Work. Specifications, Drawings and Davis Bacon Wage Rates are incorporated into this project.

FOB: Destination

PURCHASE REQUEST NUMBER: W90M8L21580100

SIGNAL CODE: A

NET AMT

Control Tower

General Parameters: The Control Tower houses the Range Control Station (RCS), Data Termination Rack (DTR), instrumentation equipment, Power Panel (PP), Heating/Ventilation/Air Conditioning (HVAC), and also accommodates range personnel. This structure provides office space for personnel conducting training exercises and space for the installation of the required electronics and communications equipment.

Functional Requirements:

1. Size: 248 square feet

2. Occupancy: 3

3. Foundation: Concrete spread footings with grade beam

4. Shell: Structural steel frame with insulated metal sandwich panels

5. Roof: Insulated Standing Seam Metal Roof (SSMR) System on structural steel tube and channel framing

6. Doors: Insulated hollow metal with polycarbonate glazing

7. Interior Finishes: Metal panel walls and ceiling, sealed concrete floor

FOB: Destination

NET AMT

Ammunition Breakdown Building

General Parameters: Used to breakdown containerized small arms ammunition and load magazines for issue to troops. A canopy is provided at the issuing door to protect personnel during period of inclement weather.

Function Requirements:

1. Size: 120 square feet enclosed

2. Occupancy: 2

3. Foundation: Concrete slab-on-grade with turned-down edges and spread footings

4. Shell: Reinforced split and smooth faced CMU

5. Roof: Standing Seam Metal Roof (SSMR) system on manufactured wood trusses

6. Doors: Hollow metal with polycarbonate glazing. Issuing doors are stainless steel coiling doors in metal frames

7. Interior Finishes: Painted CMU walls, sealed concrete floor and painted sheetrock ceiling

8. A 50-foot intra-line distance stand-off distance is required to other ROCA structures

FOB: Destination

NET AMT

ABI 1 - Reconstruction of an expanded newly located 25 Meter Zero Range adjacent to the MPMG Range. Includes all items associated with the construction of the 25 Meter Zero Range including all site grading, backstop berm, aggregate surfacing, access road extensions, range signing, range target boots, range limit markers, range lighting, and electrical items associated with the 25 Meter Zero Range. Electrical items shall include the new underground primary electrical feed from transformer T1 to T8, transformer T8, and main distribution panel MDP-1

FOB: Destination

NET AMT

ABI 2 - Classroom Building

General Parameters: This building in an instruction area for troops before, during and after range use.

Functional Requirements:

1. Size: 800 square feet

2. Occupancy: 40

3. Foundation: Concrete slab-on grade with turned-down edges and spread footings

4. Shell: Reinforced split and smooth-faced Concrete Masonry Unit (CMU)

5. Roof: Standing Seam Metal Roof (SSMR) system on manufactured wood trusses with batt insulation

6. Doors: Insulated hollow metal with polycarbonate glazing.

7. Interior Finishes: Painted SMU walls, sealed concrete floor and painted sheet rock ceiling

FOB: Destination

NET AMT

ABI 3 - Bleacher Enclosure

General Parameters: Used as an instruction area for troops before and after range use; may also be used as a range observation area.

Functional Requirements:

1. Size: 600 square feet

2. Occupancy: 200

3. Foundation: Concrete slab-on-grade with individual spread footings

4. Shell: Structural steel frame with metal siding

5. Roof: Un-insulated Standing Seam Metal Roof (SSMR) system on structural steel channel framing

6. Doors: Sliding doors may be placed in the back or on the sides for ventilation

7. Windows: None

8. Interior Finishes: Metal siding

FOB: Destination

NET AMT

ABI 4 Place Downrange Power and Data in

Conduit. Includes all items associated with placing all downrange power and data cables in appropriately sized consuit. This item shall include all appropriately sized conduits, innerducts, pullstrings, properly sized and spaced pullboxes/handholes and all other appurtenances associated with placing the power and data cables in conduit.

FOB: Destination

NET AMT

Exported unsuitable soils

NTE 120,000 CY

FOB: Destination

NET AMT

Suitable imported soils

NTE 125,000 CY

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

30-SEP-2013

CPT VINCE WOLFF

12953 SOUTH MINUTEMAN DRIVE

DRAPER UT 84020

801-432-4609

W90M8L

30-SEP-2013

W90M8L

30-SEP-2013

W90M8L

30-SEP-2013

W90M8L

30-SEP-2013

W90M8L

30-SEP-2013

W90M8L

30-SEP-2013

W90M8L

30-SEP-2013

W90M8L

30-SEP-2013

W90M8L

NOTES

NOTES

CLINS 4-7 are additive bid items. The Government will determine apparent low bidder in accordance with the procedure described in DFARS Provision 252-236-7007, Additive or Deductive Items. After determination of apparent low bidder the Government may award any combination of line items. See section 00100 Evaluation of Bids for an explanation as how the low bid will be determined for this solicitation.

* Note that as of 01 January 2005, offerors are now required to use Online Representations and Certifications (ORCA), and to update them annually. The website for ORCA is http://orca.bpn.gov. This is in addition to filling in the Representations & Certifications in Section 00600.

1. A complete bid package must contain the following:

(a) Offer, Standard Form (SF) 1442 front and back signed

(b) Section 00010 Line Items- all items must be priced

(c) A valid Bid Bond. Standard Form 24.

(d) Section 00600, Representations and Certifications, completed and return only additional certifications found in this section In addition, the offeror must have entered current and complete data within the past year in Online Representations and Certifications (ORCA), is http://orca.bpn.gov.

(e) When completing the “Offeror” portion of the SF 1442 (Blocks 14 – 20), an official having the authority to contractually bind the company must sign the SF 1442 in accordance with FAR 4.102. One copy of the SF1442 is required to have an original signature.

(f) All amendments to the solicitation must be acknowledged.

(g) Mark the front of the envelope with the following: “BID No. W911YP-12-B-0001”, and the Name and Address of Bidder. See Block 13A of SF 1442 for required number of copies.

2. All questions and requests for information regarding this Invitation For Bids (IFB) must be received NOT LATER THAN close of business five days prior to bid date in order to minimize the need to extend the bid opening date. Questions shall be emailed to email address: diane.n.johnson@us.army.mil, or email address See Section 00100 for more information.

3. Offeror’s attention is invited to the insurance requirement contained in this solicitation (Contract Clause FAR 52.228-5). Certification of the required coverage for the prime contractor shall be furnished prior to beginning work on this contract, and the Contracting Officer may request evidence of the required insurance at any time during the life the contract.

4. Reference Contract Clause 252.236-7008, CONTRACT PRICES – BIDDING SCHEDULES (DEC 1991). The prices shown in the Bidding Schedule must reflect ALL costs involved in performing the work, as described in the plans and specifications.

5. The term “Bidding Schedule” shall also be construed to mean “Offer Schedule” or “Schedule”. The terms “bid” and “offer”, and “bidder” and “offeror” shall be construed as having the same meaning in this solicitation and resulting contract.

6. All information relating to this IFB, including pertinent changes/amendments and information will be posted on web site: http://www.fbo.gov. For security reasons, all potential offerors, plan rooms and printing companies are required to register in the Central Contractor Registration (CCR), http://www.ccr.gov, and the Federal Business Opportunities (FedBizOpps) website, https://www.fbo.gov in order to view or download the plans or drawings from the web site. FedBizOpps registration requires the following information (1) Central Contractor Registration (CCR) Marketing Partner Identification Number (MPIN) 2) DUNS Number and CAGE Code3) Telephone Number 4) E-Mail Address. Registration instructions can be found on the FedBizOpps website at https://www.fbo.gov/downloads/FBO_Vendor_Guide.pdf. Reference paragraph 4.7 of the Vendor Guide for instructions to obtain a MPIN to retrieve the specification and drawing documents. Contractors who do not already have a MPIN are advised that the normal processing is 7 to 12 business days to obtain a MPIN password that will give them access to the plans and specifications, which are located in the controlled access location on FBO. See video in vendor guide at 3.3 on advanced functions for more information. Bidders/offerors who have registered with FedBizOpps must access the data for this solicitation with their MPIN. Bidders/Offerors cannot log into the FedBizOpps home page and search for data.

7. Facsimile transmission of bid is not authorized.

8. Government reserves the right to include additive bid items taken at time of award in the Base CLIN to facilitate and simplify schedule and payment processing.

9. Funds IAW FAR Provision 52.232-18, Availability of Funds. Funds are not presently available for this acquisition. No contract award will be made until appropriated funds are made available.

10. A single award is contemplated. Prospective bidders must bid on all items to be considered for award. See explanation of how low bid will be determined in section 00100 of the solicitation

11. Additive bid items are shown in plans and specifications as Options. Line item 0004, ABI 0001 is Option 1, End of Section 00010 word document

REVISION 1 EARTH MOVING

W911YP-12-B-0001 Multi-Purpose Machine Gun Range – Camp Williams, Utah

REVISION TO Copyright 2007 by The American Institute of Architects (AIA)

Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA

SECTION 312000 - EARTH MOVING

Revise this Section by deleting and inserting text to meet Project-specific requirements.

This Section uses the term "Architect." Change this term to match that used to identify the design professional as defined in the General and Supplementary Conditions.

Verify that Section titles referenced in this Section are correct for this Project's Specifications; Section titles may have changed.

Retain first paragraph below if protection zones and protection-zone fencing are required.

Original

2.1 SOIL MATERIALS

A. General: Provide borrow soil materials when sufficient satisfactory soil materials are not available from excavations.

Revise first two paragraphs below and identify soil materials according to geotechnical engineer's written recommendations. Revise soil groups and size of stone to suit Project. Most soils are classified according to ASTM D 2487. Heavy civil or highway projects may use AASHTO M 145.

B. Satisfactory Soils:

1. On-Site soils used as fill material shall have a liquid limit less than 50, a plasticity index less than 30 and a maximum particle size of 6 inches. For on-site soil used as fill beneath footings and within 1 foot of finished grade, the maximum particle size shall be 3 inches.

2. Borrow soil shall have a maximum particle size of 6 inches with less than 30% passing the No. 200 sieve. The material passing the No. 200 sieve shall have a plasticity index less than 6. For borrow soil used as fill beneath footings and within 1 foot of finished grade, the maximum particle size shall be 3 inches.

Retain subparagraphs below if required to further qualify satisfactory soil groups.

Revise As Shown Below

2.1 SOIL MATERIALS

C. General: Provide borrow soil materials when sufficient satisfactory soil materials are not available from excavations.

Revise first two paragraphs below and identify soil materials according to geotechnical engineer's written recommendations. Revise soil groups and size of stone to suit Project. Most soils are classified according to ASTM D 2487. Heavy civil or highway projects may use AASHTO M 145.

D. Satisfactory Soils:

1. On-Site soils used as fill material shall have a liquid limit less than 50, a plasticity index less than 30 and a maximum particle size of 6 inches with less than 30% passing the No. 200 sieve. For on-site soil used as fill beneath footings and within 1 foot of finished grade, the maximum particle size shall be 3 inches and the material passing the 200 sieve shall have a plasticity index less than 6.

2. Borrow soil shall have a maximum particle size of 6 inches with less than 30% passing the No. 200 sieve. The material passing the No. 200 sieve shall have a plasticity index less than 6. For borrow soil used as fill beneath footings and within 1 foot of finished grade, the maximum particle size shall be 3 inches.

Section 00100 - Bidding Schedule/Instructions to Bidders

INSTRUCTIONS

SECTION 00100 INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

1. SCOPE:

1.1. You are invited to submit a bid in response to our Invitation for Bids (IFB) entitled) W911YP-12-B-0001 entitled Construction of a Multi-Purpose Machine Gun Range (MPMG Facility, Project Number #490618.

1.2. As a result of this solicitation, the Government intends to award a Firm Fixed Price (FFP) contract resulting from this solicitation to the responsible bidder whose bid, conforming to the invitation for bids, will be most advantageous to the Government, considering only price.

1.3. This solicitation is set-aside 100% for small businesses 2.

NOTICE OF PRE-BID CONFERENCE AND SITE VISIT:

2.1. A pre-bid conference will be conducted on 05 September 2012 at 1000 hours for the purposes of briefing on the bid requirements and answering questions regarding this solicitation. This conference will be held at Camp Williams Training Site, 17800 South Camp Williams Road, Building 8000, Camp Williams, Utah 84065-4999. Interested Contractors are highly encouraged to attend the pre-bid conference. The site visit will be held following the conference.

2.2. Due to security conditions, all offerors must register to attend this conference and site visit. Email the following information for all attendees to Diane Johnson at the following addresses: diane.n.johnson@us.army.mil.

Firm Name and Telephone Number

Visitor’s Name and Social Security No.

Drivers License

Citizenship

2.3. This information must be provided in advance, not later than 3 business days prior to the meeting, in order to ensure access to the military base and conference site and ensure adequate seating for the conference attendees. Even if you have access to the base you must register to ensure adequate seating. The furnishing of the above information is voluntary; however, your failure to furnish all or part of the requested information may result in the Government’s denial of your access to the pre-proposal conference. This information will be provided to the Base Security Forces who will authorize your entrance to the site.

2.4. Visitors must report in at the Security Guard Gate. You will be required to present the following information upon arrival: (1) Vehicle Registration, (2) Valid Drivers License, (3) Proof of Insurance for Vehicle, (4) Safety Inspection and Car Rental agreement if applicable. Any of the above information furnished by you is protected under the Privacy Act and shall not be released unless permitted by law and/or you have consented to such.

2.5. Information provided at this conference or site visit shall not qualify the terms and conditions of the solicitation and specifications. Terms of the solicitation and specifications remain unchanged unless the solicitation is amended in writing. If an amendment is issued, normal procedures relating to the acknowledgment and receipt of solicitation amendments shall apply.

2.6. A record of the conference shall be made and furnished to all prospective bidders via posting at http://www.fbo.gov. The record will include minutes of the meeting, including questions (on a non-attribution basis) and answers.

3. FORMAL COMMUNICATION, OFFEROR EXPLANATIONS:

3.1. Submit all questions in the format shown below by email to the contracting office at the addresses show below. Do NOT contact the Architect or Engineering personnel directly. Doing so will only delay your answer. All questions must come through the Contracting Office.

Subject Line: Reference No. SOLICITATION W911YP-12-B-0001 Email: diane.n.johnson@us.army.mil

PRE-BID INQUIRY FORMAT

Date of Bid Inquiry: _______________

From: ______________________________ Company Name: ________________________________

Address:_____________________________________________________________________________

Phone Number: _____________________________ Fax Number:______________________________

Email address: ________________________________________________________________________

Bid Inquiry: (Please clearly state your question) (If sent via an attachment word docs are preferred to facilitate posting of answers to the master Q&A document.)

1.1. Any explanation desired by an offeror regarding the meaning or interpretation of the solicitation, or proposals, drawings, specifications, etc. must be requested in writing and with sufficient time allowed for a reply to reach bidders before the submission of their bid.

1.2. All questions and requests for information (RFI) must be received NOT LATER THAN the fifth working day prior to bid opening. OFFERORS ARE STRONGLY ENCOURAGED TO SUBMIT QUESTIONS EARLY IN THIS PROCESS.

1.3. Any interpretations made will be in the form of an amendment of the solicitation, drawings, specifications, etc., and will be furnished to all prospective offerors via posting at: http://www.fbo.gov

1.4. Receipt by the offeror must be acknowledged in the space provided on the SF 1442 or by returning a signed copy of the amendment by the time set for receipt of bids. Explanations or instructions given in a form other than an amendment to the solicitation shall not be binding. Questions (on a non-attribution basis) and answers shall be furnished to all prospective bidders via the web site.

1.5. For security reasons, all technical and engineering data related to this solicitation will be distributed using the Federal Business Opportunities (FedBizOpps.gov or fbo.gov) system. FedBizOpps is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. Interested bidders/offerors must register with FedBizOpps before accessing the system. fFedBizOpps registration requires the following information:

1.5.1. 1) Central Contractor Registration (CCR) Marketing Partner Identification Number (MPIN) 2) DUNS Number and CAGE Code3) Telephone Number 4) E-Mail Address. Registration instructions can be found on the FedBizOpps website at https://www.fbo.gov/downloads/FBO_Vendor_Guide.pdf.* *NOTE: Please Note paragraph 4.7 of the Vendor Guide for instructions in obtaining a MPIN to retrieve the specifications and drawing documents. Contractors who do not already have a MPIN are advised that the normal is 7 to 12 business days to obtain a MPIN password that will be required in obtaining access to the plans and specifications, which are located in the controlled access location on Federal Business Opportunities (FBO). See video 3.3 on advanced functions for more information. Bidders/Offerors who have registered with FBO must access the data for this solicitation with your MPIN. Bidders/Offerors cannot log into the FBO home page and search for data.

5. AMENDMENTS PRIOR TO DATE SET FOR OPENING OF BIDS: The right is reserved, as the interest of the Government may require, to revise or amend the solicitation, specifications and/or drawings, prior to the date set for opening of bids, as necessary. Such changes, if any, will be announced by an amendment or amendments to this Invitation for Bids. All information relating to this IFB, including pertinent changes/amendments and other information applicable prior to the date set for receipt of bids will be posted at: http://www.fbo.gov. Offerors are strongly cautioned to check this site frequently and to “refresh” their web page to ensure they have the latest information.

6. BID REPOSITORY AND BID OPENING:

a. A bid repository is provided for hand carried bids and is located at the USPFO for Utah, Attn: NGUT-PFO-PC, Diane Johnson, 12953 South Minuteman Drive, Draper, Utah 84020-9286. Hand carried bids must be deposited in the repository prior to the time established for opening of bids. Bidders are cautioned that they will be required to sign-in and provide information at the Security Guard Gate to enter the facility and should allow time to accomplish this. See instructions for obtain access to Camp Williams in the Site Visit instruction. Follow the same instruction for obtaining entry to hand carry bid. Late receipt of bids due to entry delays may not be deemed excusable and the Contracting Officer may declare the bid “late” in accordance with FAR 14.304.

b. The bid opening will occur at the time and date specified in Block 13 of the SF1442 Camp Williams Training Site, 17800 South Camp Williams Road, Building 800, Camp Williams, Utah 84065-4999 at 2:00 p..m. Mountain Standard Time. All interested offerors and their major subcontractors are encouraged to attend the bid opening.

7. WAGE DETERMINATION:

c. Davis Bacon Wage Rates are applicable to this project. Current prevailing wage determination(s) at time of issuance of solicitation are. General Decision Number: UT120009, dated 08/03/2012. Applicable wage rates can be found at: http://www.wdol.gov/wdol/scafiles/davisbacon/UT.html

8. BID PREPARATION EXPENSES AND PRE-CONTRACT COSTS: This IFB does not commit the Government to pay costs incurred in preparation and submission of bids or for other costs incurred prior to award of a formal contract.

9. INFORMATION REGARDING AVAILABILITY OF UTILITY SERVICES: See Section 00700 FAR Provision/Clause 52.236-14, Availability and Use of Utility Services consideration when computing offer.

10. CLAUSES:

a. Clauses and provisions from the Federal Acquisition Regulation (FAR) and supplements thereto are incorporated in this document by reference and in full text. Those incorporated by reference have the same force and effect as if they were given in full text.

b. Clauses and provisions in this document may not appear in consecutive order.

c. REMOVAL OF SECTIONS AT TIME OF AWARD: Sections 00100 and 00600 will be physically removed as a result of an award, but will be deemed to be incorporated by reference in that award.

11. DISPOSITION OF UNSUCCESSFUL BIDS:

In compliance with FAR Subpart 4.8, the Government will retain one copy of all unsuccessful bids. The Government will destroy extra copies of unsuccessful bids. No destruction certificate will be provided.

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.216-1 TYPE OF CONTRACT (APR 1984)

The Government contemplates award of a Firm Fixed Price contract resulting from this solicitation.

(End of provision)

52.222-23 NOTICE OF REQUIREMENT FOR AFFIRMATIVE ACTION TO ENSURE EQUAL EMPLOYMENT OPPORTUNITY FOR CONSTRUCTION (FEB 1999)

(a) The offeror's attention is called to the Equal Opportunity clause and the Affirmative Action Compliance Requirements for Construction clause of this solicitation.

(b) The goals for minority and female participation, expressed in percentage terms for the Contractor's aggregate workforce in each trade on all construction work in the covered area, are as follows:

These goals are applicable to all the Contractor's construction work performed in the covered area. If the Contractor performs construction work in a geographical area located outside of the covered area, the Contractor shall apply the goals established for the geographical area where the work is actually performed. Goals are published periodically in the Federal Register in notice form, and these notices may be obtained from any Office of Federal Contract Compliance Programs office.

(c) The Contractor's compliance with Executive Order 11246, as amended, and the regulations in 41 CFR 60-4 shall be based on (1) its implementation of the Equal Opportunity clause, (2) specific affirmative action obligations required by the clause entitled "Affirmative Action Compliance Requirements for Construction,'' and (3) its efforts to meet the goals. The hours of minority and female employment and training must be substantially uniform throughout the length of the contract, and in each trade. The Contractor shall make a good faith effort to employ minorities and women evenly on each of its projects. The transfer of minority or female employees or trainees from Contractor to Contractor, or from project to project, for the sole purpose of meeting the Contractor's goals shall be a violation of the contract, Executive Order 11246, as amended, and the regulations in 41 CFR 60-4. Compliance with the goals will be measured against the total work hours performed.

(d) The Contractor shall provide written notification to the Deputy Assistant Secretary for Federal Contract Compliance, U.S. Department of Labor, within 10 working days following award of any construction subcontract in excess of $10,000 at any tier for construction work under the contract resulting from this solicitation. The notification shall list the --

(1) Name, address, and telephone number of the subcontractor;

(2) Employer's identification number of the subcontractor;

(3) Estimated dollar amount of the subcontract;

(4) Estimated starting and completion dates of the subcontract; and

(5) Geographical area in which the subcontract is to be performed.

(e) As used in this Notice, and in any contract resulting from this solicitation, the "covered area" is Utah, Salt Lake County, Salt Lake City

(End of provision) 52.225-10 NOTICE OF BUY AMERICAN ACT REQUIREMENT--CONSTRUCTION MATERIALS (FEB 2009)

(a) Definitions. “Commercially available off-the-shelf (COTS) item,” “construction material,” “domestic construction material,” and “foreign construction material,” as used in this provision, are defined in the clause of this solicitation entitled “Buy American Act--Construction Materials” (Federal Acquisition Regulation (FAR) clause 52.225-9).

(b) Requests for determinations of inapplicability. An offeror requesting a determination regarding the inapplicability of the Buy American Act should submit the request to the Contracting Officer in time to allow a determination before submission of offers. The offeror shall include the information and applicable supporting data required by paragraphs (c) and (d) of the clause at FAR 52.225-9 in the request. If an offeror has not requested a determination regarding the inapplicability of the Buy American Act before submitting its offer, or has not received a response to a previous request, the offeror shall include the information and supporting data in the offer.

(c) Evaluation of offers. (1) The Government will evaluate an offer requesting exception to the requirements of the Buy American Act, based on claimed unreasonable cost of domestic construction material, by adding to the offered price the appropriate percentage of the cost of such foreign construction material, as specified in paragraph (b)(3)(i) of the clause at FAR 52.225-9.

(2) If evaluation results in a tie between an offeror that requested the substitution of foreign construction material based on unreasonable cost and an offeror that did not request an exception, the Contracting Officer will award to the offeror that did not request an exception based on unreasonable cost.

(d) Alternate offers.

(1) When an offer includes foreign construction material not listed by the Government in this solicitation in paragraph (b)(2) of the clause at FAR 52.225-9, the offeror also may submit an alternate offer based on use of equivalent domestic construction material.

(2) If an alternate offer is submitted, the offeror shall submit a separate Standard Form 1442 for the alternate offer, and a separate price comparison table prepared in accordance with paragraphs (c) and (d) of the clause at FAR 52.225-9 for the offer that is based on the use of any foreign construction material for which the Government has not yet determined an exception applies.

(3) If the Government determines that a particular exception requested in accordance with paragraph (c) of the clause at FAR 52.225-9 does not apply, the Government will evaluate only those offers based on use of the equivalent domestic construction material, and the offeror shall be required to furnish such domestic construction material. An offer based on use of the foreign construction material for which an exception was requested--

(i) Will be rejected as nonresponsive if this acquisition is conducted by sealed bidding; or

(ii) May be accepted if revised during negotiations.

(End of provision)

52.233-2 SERVICE OF PROTEST (SEP 2006)

(a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from

Office of Chief Counsel

ATTN: NGB Protest Decision Authority

111 South George Mason Drive

Building 2

Arlington, Virginia 22204-1373

FAX (703) 607-3684 or 3682

OR

Protest to the Contracting Officer shall be filed at:

USPFO for Utah

Attn: Diane Johnson, Purchasing & Contracting

12953 South Minuteman Drive

Draper, Utah 84020-2000

FAX (801) 432-4721

ONLY WRITTEN PROTESTS WILL BE CONSIDERED. NO PROTESTS MAY BE FILED BY ELECTRONIC MAIL.

(b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO.

(End of provision)

52.236-27 SITE VISIT (CONSTRUCTION) (FEB 1995) – ALTERNATE I (FEB 1995)

(a) The clauses at 52.236-2, Differing Site Conditions, and 52.236-3, Site Investigations and Conditions Affecting the Work, will be included in any contract awarded as a result of this solicitation. Accordingly, offerors or quoters are urged and expected to inspect the site where the work will be performed.

(b) An organized site visit has been scheduled for--

September 5, 2012 @ 10:00 a.m. Mountain Standard Time

(c) Participants will meet at--

Camp Williams Training Site

17800 South Camp Williams Road

Building 8000

Camp Williams, Utah 84065

(End of provision)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

www.arnet.gov/far http://farsite.hill.af.mil http://www.acq.osd.mil/dpap/dars/dfars/index.htm

(End of provision

52.252-3 ALTERATIONS IN SOLICITATION (APR 1984)

Portions of this solicitation are altered as follows:

None

52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS (APR 1984)

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of"(DEVIATION)" after the date of the provision.

(b) The use in this solicitation of any Defense Federal Acquisition Regulation Supplement (DFARS) (48 CFR Chapter II) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of provision)

252.211-7002 AVAILABILITY FOR EXAMINATION OF SPECIFICATIONS, STANDARDS, PLANS, DRAWINGS, DATA ITEM DESCRIPTIONS, AND OTHER PERTINENT DOCUMENTS (DEC. 1991)

The specifications, standards, plans, drawings, data item descriptions, and other pertinent documents cited in this solicitation are not available for distribution but may be examined at the following location:

www.fbo.gov (Insert complete address)

(End of provision)

252.236-7007 ADDITIVE OR DEDUCTIVE ITEMS. (DEC 1991)

(a) The low offeror and the items to be awarded shall be determined as follows --

(1) Prior to the opening of bids, the Government will determine the amount of funds available for the project.

(2) The low offeror shall be the Offeror that --

(i) Is otherwise eligible for award; and

(ii) Offers the lowest aggregate amount for the first or base bid item, plus or minus (in the order stated in the list of priorities in the bid schedule) those additive or deductive items that provide the most features within the funds determined available.

(3) The Contracting Officer shall evaluate all bids on the basis of the same additive or deductive items.

(i) If adding another item from the bid schedule list of priorities would make the award exceed the available funds for all offerors, the Contracting Officer will skip that item and go to the next item from the bid schedule of priorities; and

(ii) Add that next item if an award may be made that includes that item and is within the available funds.

(b) The Contracting Officer will use the list of priorities in the bid schedule only to determine the low offeror. After determining the low offeror, an award may be made on any combination of items if --

(1) It is in the best interest of the Government;

(2) Funds are available at the time of award; and

(3) The low offeror's price for the combination to be awarded is less than the price offered by any other responsive, responsible offeror.

(c) "Example." The amount available is $100,000. Offeror A's base bid and four additives (in the order stated in the list of priorities in the bid Schedule) are $85,000, $10,000, $8,000, $6,000, and $4,000. Offeror B's base bid and four additives are $80,000, $16,000, $9,000, $7,000, and $4,000. Offeror A is the low offeror. The aggregate amount of offeror A's bid for purposes of award would be $99,000, which includes a base bid plus the first and fourth additives. The second and third additives were skipped because each of them would cause the aggregate bid to exceed $100,000.

Section 00600 - Representations & Certifications

CLAUSES INCORPORATED BY REFERENCE

52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAY 2012)

(a)(1) The North American Industry Classification System (NAICS) code for this acquisition is 236220

[insert NAICS code].

(2) The small business size standard is $33.5M [insert size standard].

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(b)(1) If the clause at 52.204-7, Central Contractor Registration, is included in this solicitation, paragraph (d) of this provision applies.

(2) If the clause at 52.204-7 is not included in this solicitation, and the offeror is currently registered in CCR, and has completed the ORCA electronically, the offeror may choose to use paragraph (d) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The offeror shall indicate which option applies by checking one of the following boxes:

( ) Paragraph (d) applies.

( ) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

(c)(1) The following representations or certifications in ORCA are applicable to this solicitation as indicated:

(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless--

(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;

(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.

(iii) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the clause at 52.204-7, Central Contractor Registration.

(iv) 52.204-5, Women-Owned Business (Other Than Small Business).This provision applies to solicitations that--

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(v) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations--Representation. This provision applies to solicitations using funds appropriated in fiscal years 2008, 2009, 2010, or 2012.

(vi) 52.209-5, Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(vii) 52.223-5, Pollution Prevention and Right-to-Know Information (May 2011) (E.O. 13423) (Applies to services performed on Federal facilities).

(viii) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(ix) 52.219-1, Small Business Program Representations (Basic & Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas.

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

(x) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas.

(xi) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity.

(xii) 52.222-25, Affirmative Action Compliance. This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity.

(xiii) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items.

(xiv) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of USDA-designated items; or include the clause at 52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts.

(xv) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA-designated items.

(xvi) 52.225-2, Buy American Act Certificate. This provision applies to solicitations containing the clause at 52.225-1.

(xvii) 52.225-4, Buy American Act--Free Trade Agreements--Israeli Trade Act Certificate. (Basic, Alternates I, II, and III.) This provision applies to solicitations containing the clause at 52.225-3.

(A) If the acquisition value is less than $25,000, the basic provision applies.

(B) If the acquisition value is $25,000 or more but is less than $50,000, the provision with its Alternate I applies.

(C) If the acquisition value is $50,000 or more but is less than $77,494, the provision with its Alternate II applies.

(D) If the acquisition value is $77,494 or more but is less than $100,000, the provision with its Alternate III applies.

(xviii) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225-5.

(xix) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan--Certification. This provision applies to all solicitations.

(xx) 52.225-25, Prohibition on Contracting with Entities Engaging in Sanctioned Activities Relating to Iran--Representation and Certification. This provision applies to all solicitations.

(xxi) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to--

(A) Solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions; and

(B) For DoD, NASA, and Coast Guard acquisitions, solicitations that contain the clause at 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns.

(2) The following certifications are applicable as indicated by the Contracting Officer:

(Contracting Officer check as appropriate.)

(i) 52.219-22, Small Disadvantaged Business Status.

(A) Basic.

(B) Alternate I.

(ii) 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.

(iii) 52.222-48, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment Certification.

(iv) 52.222-52, Exemption from Application of the Service Contract Act to Contracts for Certain Services–Certification.

(v) 52.223-9, with its Alternate I, Estimate of Percentage of Recovered Material Content for EPA–Designated Products (Alternate I only).

(vi) 52.227-6, Royalty Information.

(A) Basic.

(B) Alternate I.

(vii) 52.227-15, Representation of Limited Rights Data and Restricted Computer Software.

(d) The offeror has completed the annual representations and certifications electronically via the Online Representations and Certifications Application (ORCA) website accessed through https://www.acquisition.gov. After reviewing the ORCA database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [offeror to insert changes, identifying…