DPW038539P_-_Specification_-_Product_Catalog_from_Power_Line_Sentry.pdf

P RO D U C T

C ATA LO G

VOLUME VI

Providing the most effective protection products for the distribution of electricity around the world. www.PowerLineSentry.com

Your Wildlife Protection Specialists

TM

Working on power safety solutions daily.

RGSP-24 Raptor Guard

Perching Excluder

CC-STT-CF Insulator Cap and Conductor Cover

Bird Flight Diverters and Line Markers

Wildlife Mitigation Products — Category

Page 1 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

Welcome!

Thank you for your interest in our Wildlife and Power Line Protection products. Since the company’s inception in 1998, our mission has been to assist Utilities in providing consistent and reliable power to their customers while protecting nature. We are proud to now have over 400,000 perching deterrents in service on North and South American power lines.

INSULATING VS. ISOLATING

We believe there are two effective methods that can be utilized in protecting your power lines. The first is to “isolate” the birds and wildlife from the energized portion of your structures and equipment. The second is to “insulate” the power from contact with wildlife and the environment. Therefore, we have categorized our products in this fashion as well.

All of our products are made of UV-resistant Fiberglass, PVC, polypropylene, HDPE, or silicone rubber, with non-corrosive nylon, stainless, or galvanized hardware, and all products have superior dielectric properties.

In addition, we are proud to manufacture all of our products in the USA except for the silicone rubber hose which is more suited to be extruded internationally.

Not finding what you need? We take pride in our ability to develop custom solutions to meet unique problems, so please let us know what you are looking for, and if we don’t have it in development already, we will work with you on a solution that fits your needs. We are here to help you protect your lines from wildlife, and the wildlife from your lines.

We look forward to working with you!

Todd Kerr Co-Owner

Ron Spencer Co-Owner

TM

970-599-1050 • www.PowerLineSentry.com Page 1

© Power Line Sentry, LLC

Wildlife Mitigation Products

TABLE OF CONTENTS

Wildlife Mitigation Products

Introduction—Isolating vs. Insulating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4

Isolating Products

12” Perching Deterrents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6

16” Perching Deterrents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7

24” Perching Deterrents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8

36” Perching Deterrents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9

Vertical Pole Mount Perching Deterrents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 10

Pole-Top Perching Deterrents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 11

Pole-Top Cap Perching Deterrents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 12

Spike Perching Excluders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 13

Insulating Products

Single Top Tie Insulator Cap and Conductor Cover . . . . . . . . . . . . . . . . . . . . . . . . .Page 14

Double Top Tie Insulator Cap and Conductor Cover . . . . . . . . . . . . . . . . . . . . . . .Page 15

Double Side Tie Insulator Cap and Conductor Cover . . . . . . . . . . . . . . . . . . . . . . .Page 16

69 kV Conductor Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 17

Single Insulator Cap and Flexible Line Hose Conductor Cover . . . . . . . . . . . . .Page 18

Insulating Line Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 19

Bushing and Pot-head Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 20

Streamer Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 21

Cross-arm Insulating Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 22

Squirrel and Woodpecker Guard Pole Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 23

TM

Page 2 970-599-1050 • www.PowerLineSentry.com

Page 3 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

Wildlife Mitigation Products

TABLE OF CONTENTS (CONTINUED)

Nesting and Diversion Devices

H-Frame Transmission Tower Nest Excluder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 24

Distribution Structure Nest Excluder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 25

Building Alternative Nesting Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 26

Artificial Nest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 27

Artificial Perch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 28

Avian Flight Diverters

Bird Flight Diverters and Line Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 29

Fence Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 30

TM

970-599-1050 • www.PowerLineSentry.com Page 3

Wildlife Mitigation Products — Insulating vs. Isolating

What does it mean to isolate?

We use the term “isolate” to signify that we are trying to keep the wildlife away from the energized portion of your equipment. If you can do this effectively, you don’t need to worry about insulating the energized lines and equipment in the field.

Why isolate?

Isolating wildlife away from energized portions of your equipment can often be a more cost effective option of mitigating contact with wildlife than insulating every energized line and piece of equipment. An example of this is our Raptor Guard™ perching deterrents (see above). If you can keep birds, especially birds of prey, away from the energized lines and equipment in the first place, there is no danger of service interruption or of bird injuries/death.

Another important reason for isolation is not immediately apparent. The Endangered Species Act was enacted to protect

Endangered Species that are threatened of extinction. Utilities can inadvertently violate this law by providing a man-made

“perch” giving predators an unfair advantage when hunting endangered species. Transmission and Distribution structures provide an non-natural advantage for birds of prey when hunting endangered species on the ground. In areas where protected species exist, the U.S. Fish and Wildlife Service requires that Utilities mitigate their structures to prevent predators from using these structures as a hunting perch.

Two other important acts affecting wildlife mitigation are the

Migratory Bird Treaty Act and the Bald and Golden Eagle

Protection Act.

TM

Page 4 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

UNDERSTANDING THE IMPORTANCE OF WHERE TO ISOLATE,

WHERE TO INSULATE, AND WHERE TO DO BOTH.

Page 5 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

Wildlife Mitigation Products — Insulating vs. Isolating

TM

970-599-1050 • www.PowerLineSentry.com Page 5

© Power Line Sentry, LLC

The Migratory Bird Treaty Act is the one of the most far-reaching wildlife protection laws that affect Utilities, covering 863 species of birds. In fact, it is easier to identify the species of birds that are not protected under this law than to list what is protected. The non-protected species are game birds (ducks, geese, etc.), the

Common Starling, the House Sparrow, and the

Rock Pigeon.

This law expressly forbids any party, unless permitted by regulations, to: “pursue, hunt, take, capture, kill, attempt to take, capture or kill, possess, offer for sale, sell, offer to purchase, purchase, deliver for shipment, ship, cause to be shipped, deliver for transportation transport, cause to be transported, carry, or cause to be carried by any means whatever, receive for shipment, transportation or carriage, or export, at any time, or in any manner, any migratory bird in the terms of this Convention...for the protection of migratory birds...or any part, nest, or egg of any such bird.” (16 U.S.C. 703).

Insulating vs. Isolating

When it is not possible to isolate wildlife from the energized equipment, we turn to insulating devices to cover the exposed areas. Remember, the objective is to provide a barrier that will to keep Wildlife from touching either two energized phases or an energized phase and a ground source.

INSULATING POWER SOURCES FROM WILDLIFE

Page 6 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

The Patented “X” shape design of our Raptor Guard™ perching deterrents provide a superior barrier over the first generation triangle shape design of perching deterrents. When given a choice, raptors will not perch on Raptor Guard™ installed power lines.

Wildlife Mitigation Products — Deterrents

12” RAPTOR GUARD™ WILDLIFE PERCHING DETERRENTS

FOR HORIZONTAL DISTRIBUTION CROSS-ARMS

• UV resistant PVC uprights and saddles

• Stainless Steel and Galvanized Steel

Hardware

• Withstands >100 mph winds for sustained periods

• Over 400,000 units in the field

• Hot-stick capable models available

• All hardware for installation included

• Designed to cover 16” - 22” of open space on horizontal cross-arms. Ideal for protecting between conductors mounted on the same side of the arms, or for protecting the small areas between cross-arm mounted equipment such as cutout/arrestors.

SPECIFICATIONS

RGSO-24

RGSO-12

Product Number

Description Cross Arm Width

Installation Type

Box Qty

RGAN-12 Standard Raptor Guard with angle iron mount—call for size of angle iron

Angle Iron Gloved 20

RGFL-12 Standard Raptor Guard with Flat base for pad mounting Flat Gloved 20

RGHS-12 Standard width cross-arm that can be installed manually or with a Universal Hot-stick

3 3/4” Hot-stick 20

RGSO-12 Cross-arm mounted slip-on saddle for manual installation. Most economical

3 3/4” Gloved 20

RGSO-12-5 5” wide saddle for 5” wide cross-arms typically used in a dead-end configuration

4 - 5” Gloved 20

RGSO-12-6 6” wide saddle for 6” wide heavy duty cross-arms typically found on dead-end cross-arms

5 - 6” Gloved 20

RGVT-12 Vertical application saddle is formed to attach directly to the pole Pole Gloved 20

970-599-1050 • www.PowerLineSentry.com Page 7

Wildlife Mitigation Products — Deterrents

16” RAPTOR GUARD™ WILDLIFE PERCHING DETERRENTS

FOR HORIZONTAL DISTRIBUTION CROSS-ARMS

The Patented “X” shape design of our Raptor Guard™ perching deterrents provide a superior barrier over the first generation triangle shape design of perching deterrents. When given a choice, raptors will not perch on Raptor Guard™ installed power lines.

• UV resistant PVC uprights and saddles

• Stainless Steel and Galvanized Steel

Hardware

• Withstands > 100 mph winds for sustained periods

• Over 400,000 units in the field

• Hot-stick capable models available

• All hardware for installation included

• Designed to cover 20” - 26” open space on horizontal cross-arms with conductors mounted on the same side of the arms. This is typical in under-build or a RUS C2-2 configuration

SPECIFICATIONS

Product Number

Description Cross Arm Width

Installation Type

Box Qty

RGHS-16 Standard width cross-arm that can be installed manually or with a Universal Hot Stick

3 3/4” Hot-stick 25

RGHS-16-AQ Raised upright (see below). Can be installed with a Universal Hot Stick.

3 3/4” Hot-stick 20

RGSO-16 Standard width cross-arm slip on saddle for manual installation.

Most economical.

3 3/4” Gloved 25

RGSO-16-5 5” wide saddle for 5” heavy duty cross-arm such as found on many dead-end arms

4 - 5” Gloved 20

RGSO-16-6 6” wide saddle for use on heavy duty cross-arms as typically found on deadend cross-arms

5 - 6” Gloved 20

RGSO-16-8 8” wide saddle for super heavy duty arms 7 - 8” Gloved 20

RGSO-16-10 10” wide saddle for use on 10” wide transmission grade cross-arms 9 - 10” Gloved 20

RGHS-16-AQ

Page 8 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

24” RAPTOR GUARD™ WILDLIFE PERCHING DETERRENTS

FOR HORIZONTAL DISTRIBUTION CROSS-ARMS

Wildlife Mitigation Products — Deterrents

The Patented “X” shape design of our Raptor Guard™ perching deterrents provide a superior barrier over the first generation triangle shape design of perching deterrents. When given a choice, raptors will not perch on Raptor Guard™ installed power lines.

• UV resistant PVC uprights and RPVC saddles

• Stainless Steel and Galvanized Steel

Hardware

• Withstands > 85 mph winds for sustained periods

• Over 340,000 units in the field and more than 15 years in service

• Hot-stick capable models available

• All hardware for installation included

• Designed to cover 18” - 26” open space on horizontal cross-arms, vertical mounts, lattice towers, and walls.

SPECIFICATIONS

Product Number

Description Cross Arm Width

Installation Type

Box Qty

RGHS-24 Standard width cross-arm that can be installed manually or with a Universal Hot Stick

3 3/4” Hot-stick 15

RGVT2-24 Vertical application (see below right) with saddle formed to at-tach directly to the pole for 115 kV insulators and above

Pole Mount Gloved 20

RGVT2-24W Vertical application with saddle formed to attach directly to the pole for 69 kV insulators

Pole Mount Gloved 20

RGSO-24 Standard width cross-arm slip on saddle for manual installation 3 3/4” Gloved 20

RGSO-24-5 5” wide saddle for 5” heavy duty cross-arm such as found on many dead-end arms

4 - 5” Gloved 20

RGSO-24-6 6” wide saddle for use on heavy duty cross-arms as typically found on deadend cross-arms

5 - 6” Gloved 20

RGSO-24-8 8” wide saddle for super heavy duty arms 7 - 8” Gloved 20

RGAN-24 Standard Raptor Guard with angle iron mount—call for size Angle Iron Gloved / Hot-stick

RGFL-24 Standard Raptor Guard with Flat base for pad mounting Flat Gloved 20

970-599-1050 • www.PowerLineSentry.com Page 9

Wildlife Mitigation Products — Deterrents

36” RAPTOR GUARD™ WILDLIFE PERCHING DETERRENTS

FOR HORIZONTAL DISTRIBUTION CROSS-ARMS

The Patented “X” shape design of our Raptor Guard™ perching deterrents provide a superior barrier over the first generation triangle shape design of perching deterrents. When given a choice, raptors will not perch on Raptor Guard™ installed power lines.

• UV resistant PVC uprights and RPVC saddles

• Stainless Steel and Galvanized Steel

Hardware

• Withstands > 85 mph winds for sustained periods

• Over 400,000 units in the field and more than 15 years in service

• Hotstick capable models available

• All hardware for installation included

• Designed to cover 42” - 46” open space on horizontal cross-arms, vertical mounts, lattice towers, and walls.

SPECIFICATIONS

Product Number

Description Cross Arm Width

Installation Type

Box Qty

RGHS-36 Standard width cross-arm that can be installed manually or with a Universal Hot Stick

3 3/4” Hot Stick To Order

RGSO-36 Standard width cross-arm slip on saddle for manual installation.

3 3/4” Gloved 20

RGSO-36-5 5” wide saddle for use on heavy duty arms. 4 - 5” Gloved 20

RGSO-36-6 6” wide saddle for use on heavy duty cross-arms as typically found on deadend cross-arms

5 - 6” Gloved 20

RGSO-36-8 8” wide saddle for super heavy duty arms 7 - 8” Gloved 20

RGSO-36-10 10” wide saddle for use on 10” wide transmission grade cross-arms

9 - 10” Gloved 20

RGAN-36 Standard Raptor Guard with angle iron mount - call for size Angle Iron Gloved / Hotstick

RGFL-36 Standard Raptor Guard with Flat base for pad mounting Flat Gloved 20

RGHS-16-AQ RGSO-36-8

Page 10 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

For 18—24” Insulators

RGVT2-24

For 30” and Larger Insulators

TRANSMISSION VERTICAL

CONSTRUCTION DETERRENTS

Wildlife Mitigation Products — Deterrents

Horizontal Post Insulators can provide a source for birds to perch in areas where prey can be found close by. The distance between the high voltage conductor and a potential ground source (steel or wood poles, bonded hardware, or a ground wire) is often times less than 50” apart. Our RG-VT series of deterrents are designed to prevent birds from causing outages due to phase to ground contact. Due to the intensity of the electrical field at these higher voltages, it is also uncomfortable for the bird to perch close to phase for an extended amount of time thereby minimizing their hunting opportunities.

Product Number

Description Box Size

RGVT2-24 24” of horizontal coverage with double pole mount saddles for 115 kV and higher horizontal post insulators

RGVT2-24W 24” of horizontal coverage with double pole mount saddles for 69 kV horizontal post insulators 20

SPECIFICATIONS

• UV resistant RPVC

• All galvanized and stainless steel hardware for installation included

• Tested to withstand winds of >85 mph for sustained periods

• Sized based on insulator length

• Options for braced or non-braced insulators

RGVT2-24W

970-599-1050 • www.PowerLineSentry.com Page 11

Wildlife Mitigation Products — Deterrents

POLE TOP RAPTOR GUARD™

WILDLIFE PERCHING DETERRENTS

The RG-PT Pole Top Raptor Guard™ perching deterrent was initially designed to prevent raptors from using the top of a distribution class structure as a hunting perch in protected Sage Grouse breeding grounds. It is important to note that this product can be installed on poles with or without a pole mounted insulator and conductor.

Product Number

Description Box Size

Installation Type

Box Qty

RGPT Pole Top Raptor Guard with pole top mount pin insulator Pole Gloved 35

RGPT-2 Pole Top Raptor Guard without insulator Pole Gloved 35

SPECIFICATIONS

• UV resistant PVC uprights and saddles

• Galvanized Steel Hardware

• Withstands >100 mph winds for sustained periods

• All hardware for installation included

• In service for >16 years

Wildlife Mitigation Products — Raptor Guard Perching Deterrents

RAPTOR GUARD POLE TOP

CAP PERCHING DETERRENTS

The RG-PT Pole Top Raptor Guard™ perching deterrent was initially designed to prevent raptors from using the top of a distribution class structure as a hunting perch in protected Sage Grouse breeding grounds. It is important to note that this product can be installed on poles with or without a pole mounted insulator and conductor.

SPECIFICATIONS

• Extended service life made of a UV stabilized polymer.

• Galvanized self-tapping screws supplied and stainless steel screws available upon request.

• UV stabilized 10” fiberglass spike

• Live flight cage Raptor tested

• Secure even in high winds (>100 mph) for sustained periods

• Different sizes available for pole diameter variations

• Light weight and sleek design for ease of application, yet designed and proven to withstand the worst weather conditions.

Product Number

Description Box Qty

RGPT-7 7” diameter pole top cap for pole top diameters of 6 - 8” 10

RGPT-10 10” diameter pole top cap for pole top diameters of 9 - 11” 10

RGPT-13 13” diameter pole top cap for pole top diameters of 12 - 14” 10

RGPT-7-SS 7” diameter pole top cap for pole top diameters of 6 - 8” with stainless steel hardware 10

RGPT-10-SS 10” diameter pole top cap for pole top diameters of 9 - 11” with stainless steel hardware 10

RGPT-13-SS 13” diameter pole top cap for pole top diameters of 12 - 14” with stainless steel hardware 10

Page 12 970-599-1050 • www.PowerLineSentry.com

970-599-1050 • www.PowerLineSentry.com Page 13

Wildlife Mitigation Products — Full Perching Exclusion Solutions

RAPTOR GUARD™ WILDLIFE PERCHING EXCLUDER

SOLUTIONS FOR PROTECTED SPECIES HABITAT

These products are designed specifically for excluding perching events on structures that are located in areas where protected species are known to populate, or have breeding grounds. In these cases extra measures must be taken to prevent raptors from using power line structures as hunting platforms. Power Line Sentry has developed a set of products that extend our deterrent’s capabilities to not only protect birds from being electrocuted but also discourage th ese same predators from using the structure entirely.

Product Number

Description Attachment Type

Installation Method

Box Qty

RGSP-12-EC 12” end cap for blocking perching on insulators Multiple Types Gloved 10

RGSP-24 24” spike strip with Fiberglass spikes for 8’ cross arms for use with optional RGSP-12-EC end cap

Multiple Types Gloved 10

RGSP-36 36” spike strip with Fiberglass spikes for 8’ cross arms Multiple Types Gloved 10

RGSP-48 48” spike strip with Fiberglass spikes for 10’ cross arms for use with optional RGSP-12-EC end cap

Multiple Types Gloved 10

RGSP-24-AN 24” spike strip for banding to angle iron Angle iron Gloved 10

RGSP-36-AN 36” spike strip for banding to angle iron Angle iron Gloved 10

RGSP-48-AN 48” spike strip for banding to angle iron Angle iron Gloved 10

• UV resistant Fiberglass Uprights

• UV resistant Polymer saddles

• Withstands >100 mph winds for sustained periods

• All hardware for installation included

• Designed to cover the entire cross-arm

• Modular design

• Multiple attachment saddle options including round pole, fiberglass, steel, wood, angle iron, and flat pad mounts

SPECIFICATIONS

RGSP-36 with RGSP-12-EC end cap RGSP-48

Page 14 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

Wildlife Mitigation Products — Full Perching Exclusion Solutions

RAPTOR GUARD™ WILDLIFE PERCHING EXCLUDER

SOLUTIONS FOR TRANSMISSION STRUCTURES

Product Number

Description Cross Arm Width

Installation Type

Box Qty

RGSP-12 12” fiberglass spike strip Multiple Types Gloved 10

RGSP-12-EC 12” end cap with angled fiberglass spikes for blocking perching on the ends of arms

Multiple Types Gloved 10

RGSP-24 24” spike strip with Fiberglass spikes Multiple Types Gloved 10

RGSP-24A 24” spike strip with adapter plate to fit multi-sided steel arms Multi-sided steel beams

Gloved 10

RGSP-36 36” fiberglass spike strip Multiple Types Gloved 10

RGSP-36A 36” fiberglass spike strip with adapter plate to fit multi-sided steel arms

Multi-sided steel beams

Gloved 10

RGSP-36A-EC 36” fiberglass spike strip with adapter plate and angled end cap spikes to fit multi-sided arms

Multi-sided steel beams

Gloved 10

RGSP-48 48” spike strip with Fiberglass spikes for 10’ cross arms for use with optional RGSP-12 end cap

Multiple Types Gloved 10

RGSP-24-AN 24” spike strip for banding or clamping to angle iron Angle iron Gloved 10

RGSP-36-AN 36” spike strip for banding or clamping to angle iron Angle iron Gloved 10

RGSP-48-AN 48” spike strip for banding to clamping to angle iron Angle iron Gloved 10

This products is designed specifically for excluding perching events on structures. This solves two major problems that can occur on transmission structures. The first relates to the contamination of hanging insulator strings. When birds perch above these insulator strings, they often defecate or “stream” on to the insulators below them. Over time, this material will build up and cause flashovers, damaged equipment, and outages. The second reason relates to areas where protected species are known to populate, or have breeding grounds. In these cases extra measures must be taken to prevent raptors from using power line structures as hunting platforms.

• UV resistant Fiberglass Uprights

• UV resistant Polymer saddles

• Withstands >100 mph winds for sustained periods

• All hardware for installation included

• Designed to cover the entire cross-arm

• Modular design

• Multiple attachment saddle options including mult-sided arms, fiberglass, steel, wood, and angle iron

SPECIFICATIONS

RGSP-36A-EC RGSP-24A and RGSP-24A-EC

NOTE: Custom saddles and lengths can be made to fit your needs. Please call for more information.

970-599-1050 • www.PowerLineSentry.com Page 15

Wildlife Mitigation Products — Insulating Live Lines and Insulators

SINGLE INSULATOR CAP AND CONDUCTOR COVER

FOR DISTRIBUTION POWER LINES

Product Number

Description Box Qty

CC-STT-CF Fits “C” and “F” neck single insulator. Has 8” insulator cap with standard duty conductor sleeves (size #6 through 556 mcm conductor)

CC-STT-CF-18 Shortened 42” version of the standard unit. Fits “C” and “F” neck single insulator. Has 8” insulator cap with standard duty conductor sleeves (size #6 through 556 mcm conductor)

CC-STT-CF-HD Fits “C” and “F” neck single insulator. Has 12” insulator cap with heavy duty conductor sleeves (size 587 mcm through 795 mcm conductor)

CC-STT-HP1 Fits Hendrix Clamp-top HP1-15VTP single insulator. Has 10” insulator cap with standard duty conductor sleeves (size #6 through 556 mcm conductor)

CC-STT-HP1-HD Fits Hendrix Clamp-top HP1-15VTP single insulator. Has 10” insulator cap with heavy duty con-ductor sleeves (size 587 mcm through 795 mcm conductor)

CC-STT-JK Fits “J” and “K” neck single insulators. Has 12” insulator cap with standard duty conductor sleeves (size #6 through 556 mcm conductor)

CC-STT-JK-HD Fits “J” and “K” neck single insulator. Has 12” insulator cap with heavy duty conductor sleeves (587 mcm through 795 mcm conductor)

CC-STT-TR Fits single trunion mount clamp top style single insulators. Has 10” insulator cap with standard duty conductor sleeves (size #6 through 556 mcm conductor)

CC-AT Universal Hot-stick application tool 1

Our Patented Insulator Caps and Conductor Covers have been designed with the recommendations from Utility Engineers, Linemen, and Wildlife Biologists. We focused on a solution that exceeds RUS requirements for this class of product.

• Extended service life made of UV resistant RPVC

• Easily applied manually or with a

Universal Hotstick

• Secure even in high winds (>85 mph) for sustained periods

• Covers only the energized portion of insulators, allowing the insulator skirts to naturally clean

• Fits conductor sizes #6 through

795 mcm

• Top-Tie (tangent) single insulator

• 35 kV insulation protection

• RUS Approved

• Light weight and sleek design for ease of application, yet designed and proven to withstand the worst weather conditions.

• Fits standard clamp top, C, F, J, K neck insulators, and trunnion mount

• 80” of coverage (>60” recommended)

• Pat. 7,884,285

Page 16 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

DOUBLE INSULATOR CAP AND CONDUCTOR COVER

FOR TANGENT DISTRIBUTION POWER LINES

Wildlife Mitigation Products — Insulating Live Lines and Insulators

Product Number

Description Box Qty

CC-DTT-CF Fits “C” and “F” neck double insulator. Includes caps with standard duty conductor sleeves (size #6 through 556 mcm conductor)

CC-DTT-CF-HD Fits “C” and “F” neck double insulator. Includes caps with heavy duty conductor sleeves (size 557 mcm through 795 mcm conductor)

CC-DTT-HP1 Fits Hendrix Clamp-top HP1-15VTP single insulator. Has 10” insulator cap with standard duty conductor sleeves (size #6 through 477 mcm conductor)

CC-DTT-HP1-HD Fits Hendrix Clamp-top HP1-15VTP single insulator. Has 10” insulator cap with heavy duty conductor sleeves (size 500 mcm through 795 mcm conductor)

CC-DTT-JK Fits “J” and “K” neck double insulator. Includes caps with standard duty conductor sleeves (size #6 through 556 mcm conductor)

CC-DTT-JK-HD Fits “J” neck “K” double insulator. Includes caps with heavy duty conductor sleeves (557 mcm through 795 mcm conductor)

CC-DTT-TR Fits double trunion mount clamp top style insulators. Has two 10” insulator caps with standard duty conductor sleeves (size #6 through 477 mcm conductor)

CC-AT Universal Hot-stick application tool 1

Our patented double insulator cap and conductor cover is designed to cover double cross-arm top-tie applications. This structure is typical for longer spans, down strain and road crossings such as RUS C1-1 structures. The product was designed with the recommendations from utility engineers, linemen, and wildlife biologists.

• Extended service life made of UV resistant RPVC

• Easily applied manually or with a

Universal Hot-stick

• Secure even in high winds (>85 mph) for sustained periods

• Covers only the energized portion of insulators, allowing the insulator skirts to naturally clean, (as they are designed to do), and for the insulators to be easily viewed during line inspection.

• Fits conductor sizes #6 through 795 mcm

• Adjustable sleeve for variable spacing between insulators

• Top-Tie (tangent) double insulator

• 35 kV system insulation protection

• RUS Accepted

• Light-weight and sleek design for ease of application, yet designed and proven to withstand the worst weather conditions.

• Fits standard C, F, J, K neck insulators, clamp-top, and trunnion mount.

• 80” of coverage (>60” recommended)

970-599-1050 • www.PowerLineSentry.com Page 17

Wildlife Mitigation Products — Insulating Live Lines and Insulators

DOUBLE SIDE TIE INSULATOR CAP AND CONDUCTOR COVER FOR

DISTRIBUTION POWER LINES WITH ANGLES UP TO 45 DEGREES

The side tie version of our double insulator cap and conductor cover is designed to cover double cross-arm applications on non-tangent applications where a direction change is required. The product is designed to accommodate up to a 45 degree conductor direction change.

• Side-Tie (non tangent) double insulator for line direction changes of 0 to -45 degrees.

• Extended service life made of UV resistant RPVC

• Easily applied manually or with a Universal Hot-stick

• Secure even in high winds (>85 mph) for sustained periods

• Covers only the energized portion of insulators, allowing the insulator skirts to naturally clean, (as they are designed to do), and for the insulators to be easily viewed during line inspection.

• Fits conductor sizes #6 through 795 mcm

• Adjustable sleeve for variable spacing between insulators

• 35 kV system insulation protection

• RUS Accepted

• Fits standard clamp top, C, F, J, K neck insulators, and trunnion mount.

• 80” of coverage (>60” recommended)

• Pat. 7,884,285

SPECIFICATIONS

Product Number

Description Box Qty

CC-DST-CF Fits “C” and “F” neck double insulators. Includes caps with standard duty conductor sleeves (size #6 through 477 mcm conductor)

CC-DST-CF-HD Fits “C” and “F” neck double insulators. Includes caps with heavy duty conductor sleeves (size 500 mcm through 795 mcm conductor)

CC-DST-JK Fits “J” and “K” neck double insulators. Includes caps with standard duty conductor sleeves (size #6 through 477 mcm conductor)

CC-DST-JK-HD Fits “J” and “K” neck double insulators. Includes caps with heavy duty conductor sleeves (500 mcm through 795 mcm conductor)

CC-AT Universal Hot-stick application tool 1

Page 18 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

Wildlife Mitigation Products — Insulating Live Lines and Equipment

SINGLE INSULATOR CAP

AND FLEXIBLE LINE COVER

Product Number

Description Total Wire Diameter

Box Qty

CC-FLEX-CF-075 Fits “C” and “F” neck single insulator for wire sizes 266.8 through 336.4 mcm up to 0.75” 5

CC-FLEX-CF-100 Fits “C” and “F” neck single insulator for wire sizes 397.5 mcm through 636 mcm 0.751” to 1.00” 5

CC-FLEX-CF-125 Fits “C” and “F” neck single insulator for wire sizes 666.6 mcm through 954 mcm 1.01” to 1.25” 5

CC-FLEX-CF-150 Fits Hendrix Clamp-Top insulator for wire sizes 1033 mcm through 1590 mcm 1.26” to 1.60” 5

CC-FLEX-HP1-075 Fits Hendrix Clamp-Top insulator for wire sizes 266.8 through 336.4 mcm up to 0.75” 5

CC-FLEX-HP1-100 Fits Hendrix Clamp-Top insulator for wire sizes 397.5 mcm through 636 mcm 0.751” to 1.00” 5

CC-FLEX-HP1-125 Fits Hendrix Clamp-Top insulator for wire sizes 666.6 mcm through 954 mcm 1.01” to 1.25” 5

CC-FLEX-HP1-150 Fits Hendrix Clamp-Top insulator for wire sizes 1033 mcm through 1590 mcm 1.26” to 1.60” 5

CC-FLEX-JK-075 Fits “J” and “K” neck single insulator for wire sizes 266.8 through 336.4 mcm up to 0.75” 5

CC-FLEX-JK-100 Fits “J” and “K” neck single insulator for wire sizes 397.5 mcm through 636 mcm 0.751” to 1.00” 5

CC-FLEX-JK-125 Fits “J” and “K” neck single insulator for wire sizes 666.6 mcm through 954 mcm 1.01” to 1.25” 5

CC-FLEX-JK-150 Fits “J” and “K” neck single insulator for wire sizes 1033 mcm through 1590 mcm 1.26” to 1.60” 5

This version of our patented insulator cap is attached with silicone line hose for applications such as covering over jumpers on double dead-ends, or cross-pins on buck-arm corners. The unit is shipped assembles and ready for installation in the field.

• Extended service life made of UV resistant RPVC and vulcanized silicone line hose

• Covers only the energized portion of insulators, allowing the insulator skirts to naturally clean, (as they are designed to do), and for the insulators to be easily viewed during line inspection

• Fits conductor sizes #8 through 795 mcm

• Top-Tie (tangent) single insulator

• 80” of coverage (>60” recommended)

• Easily installable by one lineman

• Rated at 28 kV insulation per phase and good for all 35 kV systems

Working on

NEW

power safety solutions daily.

www.PowerLineSentry.com

POWER LINE

SENTRY

TM

Page 20 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

Wildlife Mitigation Products — Transmission

TRUNNION MOUNT 69 KV CONDUCTOR COVERS

Our patented insulator cap and conductor cover is designed to cover vertical trunnion mount insulators typically found on 69 kV applications. The product was designed to protect against brush contact outages on sub-transmission lines.

• Extended service life made of UV resistant Polymer

• Secure even in high winds (>100 mph) for sustained periods

• Covers only the energized portion of insulators, allowing the insulator skirts to naturally clean, (as they are designed to do), and for the insulators to be easily viewed during line inspection.

• Fits conductor sizes #6 through 1154 mcm

• Models for dead-ends, single and double insulators

• Able to accommodate angles up to 40 degrees

SPECIFICATIONS

Product Number

Description Box Qty

CC-STT-TR Single Insulator and Rigid Conductor Cover (1/0 to 477 mcm) wire. Fits larger 69 kV insulators including trunion mount

CC-DTT-TR Double Insulator and Rigid Conductor Cover (1/0 to 477 mcm) wire. Fits larger 69 kV insulators including trunion mount

CC-STT-TR-HD Single Insulator and Rigid Conductor Cover (500 to 1154 mcm) wire. Fits larger 69 kV insulators including trunion mount

CC-DTT-TR-HD Double Insulator and Rigid Conductor Cover (500 to 1154 mcm) wire. Fits larger 69 kV insulators including trunion mount

CC-FLEX-TR-XXX Single Insulator and Silicone Hose Conductor Cover Fits larger 69 kV insulators including trunion mount. Silicone hose good for 34 kV brush contact. Call for proper sizing of hose to meet wire size.

970-599-1050 • www.PowerLineSentry.com Page 21

Wildlife Mitigation Products — Cut-out Cover

DISTRIBUTION CUT-OUT COVER

Our cut-out cover is designed to be installed either by hand or with a universal hotstick and fits a variety of different sized distribution cut-outs. The snap-fit design is held securely in place without any pins or additional clamps. This design covers the arching horns which are known to be a source of electrocution events. It is constructed of a UV stabilized polymer to ensure a long lasting service life.

• Extended service life made of UV resistant Polymer

• Secure even in high winds (>85 mph) for sustained periods

• Covers only the top energized portion of the cutout, allowing the insulator skirts to naturally clean, (as they are designed to do), and for the insulators to be easily viewed during line inspection.

• Fits stinger sizes #6 through 4/0 with insulating split hose

• 35 kV system protection

• Fits most distribution class cut-outs

SPECIFICATIONS

Product Number

Description Box Qty

CT-D01 Hotstickable Cut-out Cover 10

CT-D02 Hotstickable Cut-out Cover for use with Loadbuster Tools 10

CT-D03 Hotstickable Cut-out Cover for ABB 15-27 kV NCX 200 amp 10

Page 22 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

RIP-STOP™ TEAR RESISTANT

INSULATING SILICONE LINE HOSE

Wildlife Mitigation Products — Insulating Devices

Product Number

Description Wire Size

Box Qty

LH-038-2 Line Hose for .1” - .38” total diameter wire in 2’ lengths #6 to #1 25 pieces

LH-038-8 Line Hose for .1” - .38” total diameter wire in 8’ lengths #6 to #1 6 pieces

LH-038-50 Line Hose for .1” - .38” total diameter wire #6 to #1 50’ rolls

LH-063-6 Line Hose for .381” - .625 total diameter wire 1/0, 2/0, 3/0, 4/0 8 pieces

LH-063-8 Line Hose for .381” - .625 total diameter wire 1/0, 2/0, 3/0, 4/0 6 pieces

LH-063-50 Line Hose for .381” - .625” total diameter wire 1/0, 2/0, 3/0, 4/0 50’ rolls

LH-075-25 Line Hose for .51” - .75” total diameter wire 266.8 - 336.8 mcm 25’ rolls

LH-075-50 Line Hose for .51” - .75” total diameter wire 266.8 - 336.8 mcm 50’ rolls

LH-100-25 Line Hose for .76” - 1.00” total diameter wire 397.5 - 636 mcm 25’ rolls

LH-125-25 Line Hose for 1.01” - .1.25” total diameter wire 666.6 - 954 mcm 25’ rolls

LH-150-25 Line Hose for 1.26” - 1.60” total diameter wire 1113 - 1590 mcm 25’ rolls

Power Line Sentry offers a complete line of insulating silicone tubing that can be applied to existing conductor wire. Once installed, this tubing will provide a 28 kV phase to ground barrier to protect energized systems from outages due to wildlife contact.

• UV resistant High Temperature Vulcanized Silicone

• Rip-stop tear resistant

• Flame and arc resistant

• 28 kV phase to ground insulation provides ample coverage for up to 35 kV systems

• Pliable even at low temperatures

• Overlapping slit for ease of installation

• Sizes to fit wire from #6 through 1590 mcm

• Custom lengths are available. Please contact us.

NOTE: Products are not designed for human protection

970-599-1050 • www.PowerLineSentry.com Page 23

Wildlife Mitigation Products — Bushing Covers

UNIVERSAL HOTSTICK

DISTRIBUTION BUSHING COVER

Our adjustable bushing cover is designed to fit a variety of different sized distribution transformer, regulator, and capacitor bushings. The clam-shell is closed by turning the eye-screw located at the back of the cover. As the screw is turned, the cover tightens around the bushing and adjusts to the size of the bushing for a tight fit. This bushing cover can also be used for covering

URD (pot-head) terminators.

• Designed to be easily applied manually or with a Universal Hotstick

• Secure even in high winds (>85 mph) for sustained periods

• Covers only the energized portion of the insulator, allowing the insulator skirts to naturally clean

• Pop-out slats for gapped transformer bushing applications

• Removable dimpling for IR temperature sensing

• 25 kV per phase insulation protection

• Fits most distribution class bushings including pothead terminators

• UV resistant Polymer construction

SPECIFICATIONS

Product Number

Description Box Qty

BC-D01 Adjustable Bushing Cover packaged in 10 unit box 10

BC-D01-50 Adjustable Bushing Cover packaged in 50 unit box 50

Page 24 970-599-1050 • www.PowerLineSentry.com

STREAMER SHIELDS FOR TRANSMISSION CLASS

INSULATOR STRINGS

Wildlife Mitigation Products — Streamer Shields

Our Streamer Shield is designed to be placed on insulator strings to protect the insulators from being contaminated with fecal matter. This is common when birds roost on structures above the insulators and defecate (stream) on to the insulators. Once an insulator is contaminated with droppings, the chances of a flash-over are greatly increased.

• Extended service life made of a custom HDPE polymer.

• UV Weather Resistant Nylon Bolts and Locknuts

• Secure even in high winds (>90 mph) for sustained periods

• Different sizes for porcelain and polymer insulators Specify insulator neck size when ordering

• Adjustable sleeve for variable spacing between insulators

• Light weight and sleek design for ease of application, yet designed and proven to withstand the worst weather conditions.

SPECIFICATIONS

Product Number

Description Box Qty

SS-18 18” Diameter Streamer Shield for Porcelain Insulators 5

SS-18-P 18” Diameter Streamer Shield for Polymer Insulators 5

SS-22 22” Diameter Streamer Shield for Porcelain Insulators 5

SS-22-P 22” Diameter Streamer Shield for Polymer Insulators 5

Custom Custom diameters can be built for little or no extra charge. Please contact your local rep for details.

© Power Line Sentry, LLC

970-599-1050 • www.PowerLineSentry.com Page 25

RAPTOR GUARD CROSS-ARM INSULATING COVERS

The RGCC-XX series was developed to provide an insulating barrier between two phases of Wye structures that did not have adequate clearance between phases. Larger birds such as raptors, ravens, and vultures were causing outages with phase to ground events while perching on the lower cross-arm and touching the phase above.

Product Number

Description Box Qty

RGCC-84-6 84 inches of coverage on a 6” wide cross-arm To Order

RGCC-90-5 90 inches of coverage on a 5” wide cross-arm To Order

CUSTOM Call for custom widths and designs

SPECIFICATIONS

• Proprietary UV resistant Polymer compound

• All hardware included

• Secure even in high winds (> 100 mph) for sustained periods

• Custom made for your project needs

• 69 kV systems and below

• 90” of coverage (> 60” recommended)

Wildlife Mitigation Products — Insulating Live Lines and Equipment

Page 26 970-599-1050 • www.PowerLineSentry.com

INSULATING POLE WRAP

Wildlife Mitigation Products — Squirrel and Woodpecker Guards

Pole wrap is a UV stabilized poly-sheeting material that has a variety of uses. Although typically used to provide a barrier to block raccoons, squirrels, and other varmints from climbing poles or to prevent woodpeckers from damaging wooden structures, pole wrap can also be utilized as an insulating barrier to prevent phase to ground electrocutions.

• Material Proprietary UV Stabilized Polymer

• Color: Brown

• Standard Pack: 100 foot rolls

• Size: .040” Thick by various widths and lengths

• Optional: pre-cut to size

• Easy one person installation

• Can be overlapped for greater coverage

• 15 kV insulation per layer

• Hardware not included but we recommend a large head nail

SPECIFICATIONS

Product Number Description Length Box Qty

PW-040-1 .040” x 30” x 100 ft. roll pole wrap - color: Brown 30” W x 100’ L 1 roll

PW-040-1-G .040” x 30” x 100 ft. role pole wrap - color: Gray 30”W x 100’ L 1 roll

PW-040-1-3 .040” x 30” wide x 36” long pre-cut pole wrap sheets - color: Brown 30” W x 36” L 20 sheets

PW-040-1-3-G .040” x 30” wide x 36” long pre-cut pole wrap sheets - color: Gray 30”W x 36” L 20 sheets

PW-040-1-3-H .040” x 30” wide x 36” long pre-cut pole wrap sheets with 5 nail holes on leading edge - color: Gray

30’W x 36: L 20 sheets

PW-040-1-4 .040” x 30” wide x 48” long pre-cut pole wrap sheets - color: Brown 30” W x 48” L 20 sheets

PW-040-1-4-G .040” x 30” wide x 48” long pre-cut pole wrap sheets - color: Gray 30” W x 48” L 20 sheets

PW-040-1-4-H .040” x 30” wide x 48” long pre-cut pole wrap sheets with 5 nail holes on leading edge- color: Gray

30” W x 48” L 20 sheets

PW-040-1-2642 .040” x 26” wide x 42” long pre-cut sheets - color: Brown 26” W x 42” L 10 sheets

© Power Line Sentry, LLC

970-599-1050 • www.PowerLineSentry.com Page 27

Wildlife Mitigation Products — Nest Diversion

TRANSMISSION H-FRAME NEST EXCLUDERS

TM

The RGNS series of nest diverters were designed to prevent ravens, raptors, and other birds from building nests over the center phase of an H-Framed structure. An independent study has shown the device diverts the nesting to other structures even when past nesting activity in that location has occurred.

• UV resistant custom HDPE polymer

• Galvanized Steel Hardware

• All hardware for installation included

• Pre-drilled holes for installation and relief for existing insulator brackets

• Independent Study highlighting effectiveness

SPECIFICATIONS

Product Number

Description Mount Type Install Type

Box Qty

RGNS-18 18” Nest Diverter end-cap for H-Frame cross-arm ends Horizontal Base

Manual To Order

RGNS-24 24” Nest Diverter designed for the center of an H-Frame transmission structure

Horizontal Base

Manual To Order

RGNS-40 40” Nest Diverter designed specifically for OSPREY nest building for the center of an H-Frame transmission pole

Vertical Base

Manual To Order

RGNS-40

RGNS-24

Page 28 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

Wildlife Mitigation Products — Smart-Ties and Smart-Bands

SMART-TIE AND SMART-BAND

POLYMER BANDING SOLUTIONS

How many times would a long lasting zip tie come in handy to band items together on a structure or cable drop? Now there is a better solution that using electrical tape, standard zip-ties or even steel banding. Smart-Ties provide a high strength, non-conductive, and long-lasting banding solution that can replace these traditional methods. The high strength of the Smart-Band is made possible by integrating fiberglass threads throughout the length of the UV resistant polymer material. Also, since the band is made of a polymer material, there is no risk of dissimilar metal caused corrosion failures.

SPECIFICATIONS

• 15 year extended service life

• UV resistant Polymer with integrated nylon threads

• High Strength (up to 1100 lbs per band)

• IEEE 1656 tested

• Quick Attach with tamper-proof buckle

Product Number Description Box Qty

ST-20PA66-600 3/4” x 24” Smart-Tie (band with integrated zip-tie buckle) 20

ST-20PA66-750 3/4” x 30” Smart-Tie (band with integrated zip-tie buckle) 20

SB-BA-3/8-30M-PA66 3/8” wide Smart-Band polymer banding reel - 30m (97 ft) 30 meters

SB-BU-3/8-ST-PA66 Smart Buckles for the 3/8” Smart-Band 50 buckles

SB-BA-3/4-30M-PA66 3/4” wide Smart-Band polymer banding reel - 30m (97 ft) 30 meters

SB-BU-3/4-ST-PA66 Smart Buckles for the 3/4” Smart-Band 50 buckles

SM-FT-2000-19 Installation tool for 3/4” Smart-Band and Smart-Ties 1

SM-TA-528A Installation tool for 1/4” and 3/8” Smart-Bands 1

© Power Line Sentry, LLC

970-599-1050 • www.PowerLineSentry.com Page 29

CONSTRUCTING YOUR OWN

OSPREY NEST DIVERTING SOLUTION

Problem:

One of the keys to successful mitigation of an Osprey targeted site is early detection.

Once the mating pair has established their nest and eggs, it is not permitted to disturb them until the young have left. The nest pictured to the right was in the process of being built and therefore located in time to mitigate.

STEP 1: Remove Existing Nest and Heavily Mitigate

After removing the nest from the pole, install Raptor Guard Nest Excluders completely across the exposed cross-arms.

STEP 2. Construct an Alternative Nesting Site

Ron Spencer of White River Electric in Meeker, CO builds alternate nests by cutting an old cross-arm in half, adding D.A. bolts to attach it to the top of a pole, using 28” braces for support, and then placing a 3’ x 3’ platform on top. He finds that small pallets can fit very well.

Gather some twigs that are similar to the size used by the Osprey and arrange them around the outside perimeter of the platform to simulate a nest. Ron believes this will lower the risk of rejecting the new nesting platform. Ron ties these bundles down with a small amount of tie wire to hold the bundles in place.

The second trick is to place the alternate nest platform in the near vicinity and a little higher than power line they used in their previous nest site. The slightly higher elevation provides the Osprey a perceived advantage over their previous site.

STEP 3: Continue to Monitor the Site until Osprey Chooses an

Alternative nest site.

Even with heavy mitigation, building a new nesting pole, and transferring the nesting material to the alternate nest, Osprey will often try to re-build immediately after the mitigation is complete. However we have found success by removing the twigs each day or every couple of days and putting the twigs in the alternate nest.

Plan on returning to this nest site next year to make sure the returning Osprey have chosen the nest platform and have not decided to build on the pole again.

TM

Wildlife Mitigation Products — Nest Diversion

STEP 2

STEP 1

STEP 3

Page 30 970-599-1050 • www.PowerLineSentry.com

© Power Line Sentry, LLC

DISTRIBUTION NEST EXCLUDERS

Wildlife Mitigation Products — Nest Diversion

Product Number

Description Mount Type

Installation Type

Box Qty

RGNS-24S 24” Nest Diverter Cap for single cross-arms Screws Manual To Order

RGNS-36S 36" Nest Diverter for 8' single cross-arms Screws Manual To Order

RGNS-48S 48” Nest Diverter for 10’ single cross-arms Screws Manual To Order

RGNS-36 36” Nest Diverter for 8’ double cross-arms with pole cutouts and ridge holes Screws Manual To Order

RGNS-36-1 36” Nest Diverter for 10’ single cross-arms W/O pole cutouts Screws Manual To Order

RGNS-48 48” Nest Diverter for 10’ double cross-arms with pole cutouts Screws Manual To Order

RGNS-48-1 48” Nest Diverter for double cross-arms W/O pole cutouts Screws Manual To Order

The RGNS-36 and RGNS-48 nest diverter were designed to prevent raptors, ravens and other birds from building nests over double cross-arm distribution structures. The RGNS-36 is designed for 8 foot cross-arms and the RGNS-48 should be used on 10 foot cross-arms.

• UV resistant poly material HDPE

• Color: Brown

• Galvanized Steel or Stainless Steel hardware upon request

• All hardware for installation included

• Pre-drilled holes for installation

• Optional relief cut for mating to pole

• Can be overlapped for longer arms

© Power Line Sentry, LLC

970-599-1050 • www.PowerLineSentry.com Page 31

FIBERGLASS ARTIFICIAL NESTING PLATFORM

Wildlife Mitigation Products — Nesting and Nest Deterrents

TM

Looking for an quick way to divert a nesting pair of ravens or raptors? This long lasting fiberglass nesting platform may be a good solution. For a long term solution, we recommend placing the platform on an adjacent pole dedicated to the nest platform but if you don’t have time during nesting season to get the proper right of way documentation in place then mounting this platform to the pole or pole top may be a good short term alternative. Once the nest has been vacated, you can move the platform to a more suitable location.

Product Number

Description Box Qty

RGNP-24 24” x 24” fiberglass box nesting platform (mount frame not included) 1

RGNP-36 36” x 36” fiberglass box nesting platform (mount frame not included) 1

RGNP-36-W 36” x 36” wooden no-nail box nesting platform (mount frame not included) designed by James Heck 1

RGNP-48 48” x 48” fiberglass box nesting platform (mount frame not included) 1

SPECIFICATIONS

• Fully Assembled

• Designed to hold hundreds of pounds of nesting material

• Long lasting fiberglass construction

• Easy…