Westpointski102325 Inspection Maintenance Report 23 Oct 25.pdf

This document contains project completion records and inspection reports for ski lift maintenance and repair work at Victor Constant Ski Area and West Point Ski Area in New York.

The first document is a Scope of Work dated October 23, 2025, for contract W911SD-24-P-0121, detailing maintenance completed on a triple chair lift at Victor Constant Ski Area. Work performed included gearbox oil removal and inspection, structural steel and concrete inspection, service brake and emergency brake oil changes with pad inspection and torque testing (108 ft lbs), backstop lubrication, reversion terminal bearing greasing, counterweight rope greasing, haul rope wire inspection, chair grip testing on chairs 5-92 with slip testing at 240 ft lbs, line sheave greasing and brittle bar connection cleaning, T-7 downhill liner changes, tower painting (towers 1-5), and chair slat replacement. Additional Handle Tow work included wire rope and splice inspection, electric connection cleaning, drive and return terminal servicing, and installation of a new E-stop switch on the drive cabinet door. Two subsequent Aerial Passenger Tramway Wire Rope Engineering Surveys dated October 8, 2025, document rope inspections for a Triple Chair (Borvig, 1984) and Handle Tow (Multi Ski Lift, 2008). Both surveys found ropes in conformance with ANSI B77.1 standards, with no broken wires in main rope bodies, good splice conditions, and normal lubrication status. The final document is a Magnetic Particle Inspection report dated August 11, 2025, from Partek Ski Lifts, certifying that 10 rope grips were inspected and found acceptable per manufacturer specifications using wet fluorescent methods with Parker DA-750 equipment. All inspections were conducted by Level II inspectors per ASTM standards and military specifications.