Solicitation Amendment - W911S625QA0130001.pdf

WOMEN-OWNED SMALL

BUSINESS (WOSB)

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NUMBER 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect 8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NUMBER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

REQUEST

FOR QUOTE

(RFQ)

INVITATION

FOR BID

(IFB)

REQUEST

FOR

PROPOSAL

(RFP)

SEE ADDENDUM

19.

ITEM NUMBER

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH

AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND

ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS

SPECIFIED

29. AWARD OF CONTRACT: REFERENCE OFFER

DATED . . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NORTH AMERICAN

INDUSTRY CLASSIFICATION

STANDARD (NAICS):

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

THE DEFENSE PRIORITIES

AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FREE ON

BOARD (FOB) DESTINATION

UNLESS BLOCK IS MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

8(A)

ECONOMICALLY

DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.

calls)

Solicitation/Contract Form Continuation

BioSafety Cabinet Maintenance and Certification

W911S625QA0130001

Continuation of Supplies or Services and Prices/Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

BTD Class IIA BSC Base Year

See PWS (attached in FULL TEXT below)

5.1

- The contractor shall maintain and certify Class IIA biosafety Cabinet (BTD). Engineering Controls Certification IAW 385-69.

Certification includes, but not limited to, labor, repair, materials, parts, etc.

Quantity of 8 are Subject to Availability of Funds. See BTD Equipment list for Models, Building/Room Information, and SAF list.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

41 Each

BTD Class II/Type A2 BSC Base Year

See PWS (attached in FULL TEXT below)

5.2 -The Contractor shall Maintain and certify Class II/Type A2 Biosafety cabinets; Engineering Controls Certification IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

4 Each

SPD Class IIA BSC Base Year BSC's at 3 locations: BDMSF (Bldg 4126), Georgia and Behind (South) Bldg 4126.

See PWS (attached in FULL TEXT below)

5.2.1 - The contractor shall maintain and certify Class IIA biosafety Cabinet (SPD). Engineering Controls Certification IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

16 Each

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

BTD Barrier Isolator Certification Base Year

See PWS (attached in FULL TEXT below)

5.3 - The contractor shall maintain and certify Barrier Isolators - Engineering controls certification IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

BTD Clean Bench Certification Base Year

See PWS (attached in FULL TEXT below)

5.4 - The contractor shall maintain and certify Clean Bench.

Engineering controls certification

IAW 385-69

Horizontal laminar flow "clean benches" are not BSCs. These pieces of equipment discharge HEPA-filtered air from the back of the cabinet across the work surface and toward the user. These devices only provide product protection.

They can be used for certain clean activities, such as dust-free assembly of sterile equipment. Clean benches should never be used when handling cell culture material or when manipulating potentially infectious materials. The worker will be exposed to the material being manipulated on the clean bench potentially resulting in hypersensitivity, toxicity or infection depending on the materials being handled. Horizontal airflow "clean benches" must never be used as a substitute for a biological safety cabinet. Users must be aware of the differences between the two devices.

The contractor shall perform all field tests in accordance with the manufactures' test criteria and instructions. The contractor shall indicate on each test report that the manufacturer was contacted, and the test criteria was verified.

Maintenance/certification

1 Each includes, but not limited to:

labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

BTD Maintenance/Certification Class III Glove Box Base Year

See PWS (attached in FULL TEXT below)

5.5

- Maintenance and Certification of Class III glove boxes IAW latest edition BMBL (Biosafety in Microbiological and Biomedical Laboratories) NSF/ANSI 49.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

BTD HEPA Filters Base Year

See PWS (attached in FULL TEXT below)

5.5

- The contractor shall certify HEPA Filter Banks IAW latest edition BMBL (Biosafety in Microbiological and Biomedical Laboratories) - NSF/ANSI

HEPA filters will be certified annually and after repair, movement, maintenance, or filter change; HEPA Filter Leak Test: This test is performed to determine the integrity of supply and exhaust HEPA filters, filter housing and filter mounting frames while the cabinet is operated at the nominal set point velocities.

An aerosol in the form of generated particulates poly alpha olefin (PAO), di (2-ethylhexyl) sebecate, and polyethylene glycol and medical grade light mineral oil) is required for leak-testing HEPA filters and their seals. The aerosol is generated on the intake side of the filter and particles passing through the filter or around the seal are measured with a photometer on the discharge side. This test is suitable for ascertaining the integrity of all HEPA filters.

Maintenance/certification includes, 53 Each but not limited to: labor, repair, materials, parts, etc.

QTY 1

Flanders Facility HEPA/2028 Exhaust is Subject to Availability of Funds.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

SPD Filtered Airflo Monitor (Powder Containment Hood) Certification Base Year

Labconco 3950501 Location:

Behind (South) Bldg 4126

See PWS (attached in FULL TEXT below)

5.7

- Airflo Monitor cabinet shall be certified annually and after repair, movement, maintenance or filter change. The contractor shall perform all field tests in accordance with the manufactures' test criteria and instructions. The contractor shall indicate on each test report that the manufacturer was contacted, and the test criteria was verified.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

BTD Unscheduled Assessments Base Year

PER PWS 5.8: The contractor shall provide non-personal service to perform initial assessments for each emergency call-out to ascertain the level of effort and price required to conduct repairs, outside the manufacturer's recommended preventative maintenance requirements for any biosafety cabinet or HEPA filter. The assessment shall be a firm-fixed price to include all costs, i.e.

labor, parts, travel, general and administrative, profit, rental cars, and fully burdened etc. After unscheduled assessment is completed and provided to the COR, the repairs will be approved by the contracting officer with a contract modification.

(SUBJECT TO

4 Each

AVAILABILITY OF FUNDS IN ACCORDANCE

WITH FAR 52.232-18)

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

SPD Unscheduled Assessments Base Year

PER PWS 5.8.1: The contractor shall provide non-personal service to perform initial assessments for each emergency call-out to ascertain the level of effort and price required to conduct repairs, outside the manufacturer's recommended preventative maintenance requirements for any biosafety cabinet or HEPA filter. The assessment shall be a firm-fixed price to include all costs, i.e.

labor, parts, travel, general and administrative, profit, rental cars, and fully burdened etc. After unscheduled assessment is completed and provided to the COR, the repairs will be approved by the contracting officer with a contract modification.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

2 Each

BTD Regularly Scheduled Travel Base Year

PER PWS 5.9: Vendor to travel from home location to Dugway Proving Ground for an expected 3 times per year. If DPG requires unscheduled visits that can coincide with the standard maintenance, fewer than 3 trips may be required and this will be coordinated with the COR and the Contracting Officer. Regularly scheduled service shall be a firm-fixed-price to include all costs, i.e. labor, parts, travel, general and administrative, profit, rental cars, and fully burdened, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

3 Each

SPD Regularly Scheduled Travel Base Year

PER PWS 5.9.1: Vendor to travel from home location to Dugway Proving Ground for an expected 3 times per year. If DPG requires unscheduled visits that can coincide with the standard maintenance, fewer than 3 trips may be required and this will be coordinated with the COR and the Contracting Officer.

Regularly scheduled service shall be a firm-fixed-price to include all

3 Each costs, i.e. labor, parts, travel, general and administrative, profit, rental cars, and fully burdened, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

BTD HEPA Filter Adjustment/Reseat Base Year

PER PWS 5.10: Contractor shall include labor to adjust/remove/reseat any of the problematic HEPA filters.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

7 Each

SPD HEPA Filter Adjustment/Reseat Base Year

PER PWS 5.10.1:

Contractor shall include labor to adjust/remove/reseat any of the problematic HEPA filters.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

2 Each

Option Line Item

BTD Class IIA BSC Option Year 1

See PWS (attached in FULL TEXT below)

5.1 - The contractor shall maintain and certify Class IIA biosafety Cabinet (BTD). Engineering Controls Certification IAW 385-69.

Certification includes, but not limited to, labor, repair, materials, parts, etc.

Quantity of 8 are Subject to Availability of Funds. See BTD Equipment list for Models, Building/Room Information, and SAF list.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

41 Each

Option Line Item

BTD Class II/Type A2 BSC Option Year

See PWS (attached in FULL TEXT below)

5.2 -The Contractor shall Maintain and certify Class II/Type A2 Biosafety cabinets; Engineering Controls Certification IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

4 Each

Option Line Item

SPD Class IIA BSC Option Year 1 BSC's at 3 locations: BDMSF (Bldg 4126), Georgia and Behind (South) Bldg 4126.

See PWS (attached in FULL TEXT below)

5.2.1 - The contractor shall maintain and certify Class IIA biosafety Cabinet (SPD). Engineering Controls Certification IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

16 Each

Option Line Item

BTD Barrier Isolator Certification Option Year 1

See PWS (attached in FULL TEXT below)

5.3 - The contractor shall maintain and certify Barrier Isolators - Engineering controls certification

IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

BTD Clean Bench Certification Option Year 1

See PWS (attached in FULL TEXT below)

5.4 - The contractor shall maintain and certify Clean Bench. Engineering controls certification IAW 385-69

Horizontal laminar flow "clean benches" are not BSCs. These pieces of equipment discharge HEPA-filtered air from the back of the cabinet across the work surface and toward the user. These devices only provide product protection. They can be used for certain clean activities, such as dust-free assembly of sterile equipment. Clean benches should never be used when handling cell

Option Line Item culture material or when manipulating potentially infectious materials. The worker will be exposed to the material being manipulated on the clean bench potentially resulting in hypersensitivity, toxicity or infection depending on the materials being handled. Horizontal airflow "clean benches" must never be used as a substitute for a biological safety cabinet. Users must be aware of the differences between the two devices.

The contractor shall perform all field tests in accordance with the manufactures' test criteria and instructions. The contractor shall indicate on each test report that the manufacturer was contacted, and the test criteria was verified.

Maintenance/certification includes, but not limited to:

labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

Option Line Item

BTD Maintenance/Certification Class III Glove Box Option Year 1

See PWS (attached in FULL TEXT below)

5.5

- Maintenance and Certification of Class III glove boxes IAW latest edition BMBL (Biosafety in Microbiological and Biomedical Laboratories) NSF/ANSI 49.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

BTD HEPA Filters Option Year 1

See PWS (attached in FULL TEXT below)

5.5 - The contractor shall certify HEPA Filter Banks IAW latest edition BMBL (Biosafety in Microbiological and Biomedical Laboratories) -

NSF/ANSI 49

HEPA filters will be certified annually and after repair, movement, maintenance, or filter change; HEPA Filter Leak Test: This test is performed to determine the integrity of supply and exhaust HEPA filters, filter housing and filter mounting frames while the cabinet is operated at the nominal set point velocities. An aerosol in the form of generated particulates poly alpha olefin (PAO), di (2-ethylhexyl) sebecate, and polyethylene glycol and medical grade light mineral oil) is required for leak-testing HEPA filters and their seals. The aerosol is generated on the intake side of the filter and particles passing through the filter or around the seal are measured with a photometer on the discharge side. This test is suitable for ascertaining the integrity of all HEPA filters.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

QTY 1

Flanders Facility HEPA/2028 Exhaust is Subject to Availability of Funds.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

53 Each

Option Line Item

SPD Filtered Airflo Monitor (Powder Containment Hood) Certification Option Year 1

Labconco 3950501 Location: Behind (South) Bldg

See PWS (attached in FULL TEXT below)

5.7 - Airflo Monitor cabinet shall be certified annually and after repair, movement, maintenance or filter change. The contractor shall perform all field tests in accordance with the manufactures' test criteria and instructions. The contractor shall indicate on each test report that the manufacturer was contacted, and the test criteria was verified.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

BTD Unscheduled Assessments Option Year 1

PER PWS 5.8: The contractor shall provide non-personal service to perform initial assessments for each emergency call-out to ascertain the level of effort and price required to conduct repairs, outside the manufacturer's recommended preventative maintenance requirements for any biosafety cabinet or HEPA filter. The assessment shall be a firm-fixed price to include all costs, i.e.

labor, parts, travel, general and administrative, profit, rental cars, and fully burdened etc. After unscheduled assessment is completed and provided to the COR, the repairs will be approved by the contracting officer with a contract modification.

(SUBJECT TO

AVAILABILITY OF FUNDS IN ACCORDANCE

WITH FAR 52.232-18)

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

4 Each

Option Line Item

SPD Unscheduled Assessments Option Year 1

PER PWS 5.8.1: The contractor shall provide non-personal service to perform initial assessments for each emergency call-out to ascertain the level of effort and price required to conduct repairs, outside the manufacturer's recommended preventative maintenance requirements for any biosafety cabinet or HEPA filter. The assessment shall be a firm-fixed price to include all costs, i.e.

labor, parts, travel, general and administrative, profit, rental cars, and fully burdened etc. After unscheduled assessment is completed and provided to the COR, the repairs will be approved by the contracting officer with a contract modification.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

2 Each

Option Line Item

BTD Regularly Scheduled Travel Option Year 1

PER PWS 5.9: Vendor to travel from home location to Dugway Proving Ground for an expected 3 times per year. If DPG requires unscheduled visits that can coincide with the standard maintenance, fewer than 3 trips may be required and this will be coordinated with the COR and the Contracting Officer. Regularly scheduled service shall be a firm-fixed-price to include all costs, i.e. labor, parts, travel, 3 Each rental cars, and fully burdened, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

Option Line Item

SPD Regularly Scheduled Travel Option Year 1

PER PWS 5.9.1: Vendor to travel from home location to Dugway Proving Ground for an expected 3 times per year. If DPG requires unscheduled visits that can coincide with the standard maintenance, fewer than 3 trips may be required and this will be coordinated with the COR and the Contracting Officer. Regularly scheduled service shall be a firm-fixed-price to include all costs, i.e. labor, parts, travel, general and administrative, profit, rental cars, and fully burdened, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

3 Each

Option Line Item

BTD HEPA Filter Adjustment/Reseat Option Year 1

PER PWS 5.10:

Contractor shall include labor to adjust/remove/reseat any of the problematic HEPA filters.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

7 Each

Option Line Item

SPD HEPA Filter Adjustment/Reseat Option Year 1

PER PWS 5.10.1:

Contractor shall include labor to adjust/remove/reseat any of the problematic HEPA filters.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

2 Each

Option Line Item

BTD Class IIA BSC Option Year 2

See PWS (attached in FULL TEXT below)

5.1 - The contractor shall maintain and certify Class IIA biosafety Cabinet (BTD). Engineering Controls Certification IAW 385-69.

Certification includes, but not limited to, labor, repair, materials, parts, etc.

Quantity of 8 are Subject to Availability of Funds. See BTD Equipment list for Models, Building/Room Information, 41 Each and SAF list.

Pricing Arrangement: Firm Fixed Price

Option Line Item

BTD Class II/Type A2 BSC Option Year

See PWS (attached in FULL TEXT below)

5.2 -The Contractor shall Maintain and certify Class II/Type A2 Biosafety cabinets; Engineering Controls Certification IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

4 Each

Option Line Item

SPD Class IIA BSC Option Year

BSC's at 3 locations: BDMSF (Bldg 4126), Georgia and Behind (South) Bldg 4126.

See PWS (attached in FULL TEXT below)

5.2.1 - The contractor shall maintain and certify Class IIA biosafety Cabinet (SPD). Engineering Controls Certification IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

16 Each

Option Line Item

BTD Barrier Isolator Certification Option Year 2

See PWS (attached in FULL TEXT below)

5.3 - The contractor shall maintain and certify Barrier Isolators - Engineering controls certification

IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

BTD Clean Bench Certification Option Year 2

See PWS (attached in FULL TEXT below)

5.4 - The contractor shall maintain and certify Clean Bench. Engineering controls certification IAW 385-69

Horizontal laminar flow "clean benches" are not BSCs. These pieces of equipment discharge HEPA-filtered air from the back of the cabinet across the work surface and toward the user. These devices only provide product protection. They can be used for certain clean activities, such as dust-free assembly of sterile equipment. Clean benches should never be used when handling cell culture material or when manipulating potentially infectious materials. The worker will be exposed to the material being manipulated on the clean bench potentially resulting in hypersensitivity, toxicity or infection depending on the materials being handled. Horizontal airflow "clean benches" must never be used as a substitute for a biological safety cabinet. Users must be aware of the differences between the two devices.

The contractor shall perform all field tests in accordance with the manufactures' test criteria and instructions. The contractor shall indicate on each test report that the manufacturer was contacted, and the test criteria was verified.

Maintenance/certification includes, but not limited to:

labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

Option Line Item

BTD Maintenance/Certification Class III Glove Box Option Year 2

See PWS (attached in FULL TEXT below)

5.5

- Maintenance and Certification of Class III glove boxes IAW latest edition BMBL (Biosafety in Microbiological and Biomedical Laboratories) NSF/ANSI 49.

1 Each

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

Option Line Item

BTD HEPA Filters Option Year 2

See PWS (attached in FULL TEXT below)

5.5 - The contractor shall certify HEPA Filter Banks IAW latest edition BMBL (Biosafety in Microbiological and Biomedical Laboratories) -

NSF/ANSI 49

HEPA filters will be certified annually and after repair, movement, maintenance, or filter change; HEPA Filter Leak Test: This test is performed to determine the integrity of supply and exhaust HEPA filters, filter housing and filter mounting frames while the cabinet is operated at the nominal set point velocities. An aerosol in the form of generated particulates poly alpha olefin (PAO), di (2-ethylhexyl) sebecate, and polyethylene glycol and medical grade light mineral oil) is required for leak-testing HEPA filters and their seals. The aerosol is generated on the intake side of the filter and particles passing through the filter or around the seal are measured with a photometer on the discharge side. This test is suitable for ascertaining the integrity of all HEPA filters.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

QTY 1

Flanders Facility HEPA/2028 Exhaust is Subject to Availability of Funds.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

53 Each

SPD Filtered Airflo Monitor (Powder Containment Hood) Certification Option Year 2

Labconco 3950501 Location: Behind (South) Bldg

See PWS (attached in FULL TEXT below)

5.7 - Airflo Monitor cabinet shall be certified annually and after repair, movement, maintenance or filter change. The contractor shall perform all field tests in accordance with the manufactures' test criteria and instructions. The contractor shall indicate on each test report that the manufacturer was contacted, and the test criteria was verified.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

Option Line Item

BTD Unscheduled Assessments Option Year 2

PER PWS 5.8: The contractor shall provide non-personal service to perform initial assessments for each emergency call-out to ascertain the level of effort and price required to conduct repairs, outside the manufacturer's recommended preventative maintenance requirements for any biosafety cabinet or HEPA filter. The assessment shall be a firm-fixed price to include all costs, i.e.

labor, parts, travel, general and administrative, profit, rental cars, and fully burdened etc. After unscheduled assessment is completed and provided to the COR, the repairs will be approved by the contracting officer with a contract modification.

(SUBJECT TO

AVAILABILITY OF FUNDS IN ACCORDANCE

WITH FAR 52.232-18)

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

4 Each

Option Line Item

SPD Unscheduled Assessments Option Year 2

PER PWS 5.8.1: The contractor shall provide non-personal service to perform initial assessments for each emergency call-out to ascertain the level of effort and price required to conduct repairs, outside the manufacturer's recommended preventative maintenance requirements for any biosafety cabinet or HEPA filter. The assessment shall be a firm-fixed price to include all costs, i.e.

labor, parts, travel, general and administrative, profit, rental cars, and fully burdened etc. After unscheduled assessment is completed

2 Each and provided to the COR, the repairs will be approved by the contracting officer with a contract modification.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

Option Line Item

BTD Regularly Scheduled Travel Option Year 2

PER PWS 5.9: Vendor to travel from home location to Dugway Proving Ground for an expected 3 times per year. If DPG requires unscheduled visits that can coincide with the standard maintenance, fewer than 3 trips may be required and this will be coordinated with the COR and the Contracting Officer. Regularly scheduled service shall be a firm-fixed-price to include all costs, i.e. labor, parts, travel, general and administrative, profit, rental cars, and fully burdened, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

3 Each

Option Line Item

SPD Regularly Scheduled Travel Option Year 2

PER PWS 5.9.1: Vendor to travel from home location to Dugway Proving Ground for an expected 3 times per year. If DPG requires unscheduled visits that can coincide with the standard maintenance, fewer than 3 trips may be required and this will be coordinated with the COR and the Contracting Officer. Regularly scheduled service shall be a firm-fixed-price to include all costs, i.e. labor, parts, travel, general and administrative, profit, rental cars, and fully burdened, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

3 Each

Option Line Item

BTD HEPA Filter Adjustment/Reseat Option Year 2

PER PWS 5.10:

Contractor shall include labor to adjust/remove/reseat any of the problematic HEPA filters.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

7 Each

SPD HEPA Filter Adjustment/Reseat Option Year 2

PER PWS 5.10.1:

Contractor shall include labor to adjust/remove/reseat any of the problematic HEPA filters.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

2 Each

Option Line Item

BTD Class IIA BSC Option Year 3

See PWS (attached in FULL TEXT below)

5.1 - The contractor shall maintain and certify Class IIA biosafety Cabinet (BTD). Engineering Controls Certification IAW 385-69.

Certification includes, but not limited to, labor, repair, materials, parts, etc.

Quantity of 8 are Subject to Availability of Funds. See BTD Equipment list for Models, Building/Room Information, and SAF list.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

41 Each

Option Line Item

BTD Class II/Type A2 BSC Option Year

See PWS (attached in FULL TEXT below)

5.2 -The Contractor shall Maintain and certify Class II/Type A2 Biosafety cabinets; Engineering Controls Certification IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

4 Each

Option Line Item

SPD Class IIA BSC Option Year

BSC's at 3 locations: BDMSF (Bldg 4126), Georgia and Behind (South) Bldg 4126.

See PWS (attached in FULL TEXT below)

5.2.1 - The contractor shall maintain and certify Class IIA biosafety Cabinet (SPD). Engineering Controls Certification IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

16 Each

Option Line Item

BTD Barrier Isolator Certification Option Year 3

See PWS (attached in FULL TEXT below)

5.3 - The contractor shall maintain and certify Barrier Isolators - Engineering controls certification

IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

Option Line Item

BTD Clean Bench Certification Option Year 3

See PWS (attached in FULL TEXT below)

5.4 - The contractor shall maintain and certify Clean Bench. Engineering controls certification IAW 385-69

Horizontal laminar flow "clean benches" are not BSCs. These pieces of equipment discharge HEPA-filtered air from the back of the cabinet across the work surface and toward the user. These devices only provide product protection. They can be used for certain clean activities, such as dust-free assembly of sterile equipment. Clean benches should never be used when handling cell culture material or when manipulating potentially infectious materials. The worker will be exposed to the material being manipulated on the clean bench potentially resulting in hypersensitivity, toxicity or infection depending on the materials being handled. Horizontal airflow "clean benches" must never be used as a substitute for a biological safety cabinet. Users must be aware of the differences between the two devices.

The contractor shall perform all field tests in accordance with the manufactures' test criteria and instructions. The contractor shall indicate on each test report that the manufacturer was contacted, and the test criteria was verified.

1 Each

Maintenance/certification includes, but not limited to:

labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

Option Line Item

BTD Maintenance/Certification Class III Glove Box Option Year 3

See PWS (attached in FULL TEXT below)

5.5

- Maintenance and Certification of Class III glove boxes IAW latest edition BMBL (Biosafety in Microbiological and Biomedical Laboratories) NSF/ANSI 49.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

Option Line Item

BTD HEPA Filters Option Year 3

See PWS (attached in FULL TEXT below)

5.5 - The contractor shall certify HEPA Filter Banks IAW latest edition BMBL (Biosafety in Microbiological and Biomedical Laboratories) -

NSF/ANSI 49

HEPA filters will be certified annually and after repair, movement, maintenance, or filter change; HEPA Filter Leak Test: This test is performed to determine the integrity of supply and exhaust HEPA filters, filter housing and filter mounting frames while the cabinet is operated at the nominal set point velocities. An aerosol in the form of generated particulates poly alpha olefin (PAO), di (2-ethylhexyl) sebecate, and polyethylene glycol and medical grade light mineral oil) is required for leak-testing HEPA filters and their seals. The aerosol is generated on the intake side of the filter and particles passing through the filter or around the seal are measured with a photometer on the discharge side. This test is suitable for ascertaining the integrity of all HEPA filters.

Maintenance/certification includes, but not limited to: labor, repair, 53 Each materials, parts, etc.

QTY 1

Flanders Facility HEPA/2028 Exhaust is Subject to Availability of Funds.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

Option Line Item

SPD Filtered Airflo Monitor (Powder Containment Hood) Certification Option Year 3

Labconco 3950501 Location: Behind (South) Bldg

See PWS (attached in FULL TEXT below)

5.7 - Airflo Monitor cabinet shall be certified annually and after repair, movement, maintenance or filter change. The contractor shall perform all field tests in accordance with the manufactures' test criteria and instructions. The contractor shall indicate on each test report that the manufacturer was contacted, and the test criteria was verified.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

Option Line Item

BTD Unscheduled Assessments Option Year 3

PER PWS 5.8: The contractor shall provide non-personal service to perform initial assessments for each emergency call-out to ascertain the level of effort and price required to conduct repairs, outside the manufacturer's recommended preventative maintenance requirements for any biosafety cabinet or HEPA filter. The assessment shall be a firm-fixed price to include all costs, i.e.

labor, parts, travel, general and administrative, profit, rental cars, and fully burdened etc. After unscheduled assessment is completed and provided to the COR, the repairs will be approved by the contracting officer with a contract modification.

(SUBJECT TO

AVAILABILITY OF FUNDS IN ACCORDANCE

WITH FAR 52.232-18)

4 Each

Option Line Item

SPD Unscheduled Assessments Option Year 3

PER PWS 5.8.1: The contractor shall provide non-personal service to perform initial assessments for each emergency call-out to ascertain the level of effort and price required to conduct repairs, outside the manufacturer's recommended preventative maintenance requirements for any biosafety cabinet or HEPA filter. The assessment shall be a firm-fixed price to include all costs, i.e.

labor, parts, travel, general and administrative, profit, rental cars, and fully burdened etc. After unscheduled assessment is completed and provided to the COR, the repairs will be approved by the contracting officer with a contract modification.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

2 Each

Option Line Item

BTD Regularly Scheduled Travel Option Year 3

PER PWS 5.9: Vendor to travel from home location to Dugway Proving Ground for an expected 3 times per year. If DPG requires unscheduled visits that can coincide with the standard maintenance, fewer than 3 trips may be required and this will be coordinated with the COR and the Contracting Officer. Regularly scheduled service shall be a firm-fixed-price to include all costs, i.e. labor, parts, travel, general and administrative, profit, rental cars, and fully burdened, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

3 Each

Option Line Item

SPD Regularly Scheduled Travel Option Year 3

PER PWS 5.9.1: Vendor to travel from home location to Dugway Proving Ground for an expected 3 times per year. If DPG requires unscheduled visits that can coincide with the standard maintenance, fewer than 3 trips may be required and this will be coordinated with the COR and the Contracting Officer. Regularly scheduled service shall be a

3 Each firm-fixed-price to include all costs, i.e. labor, parts, travel, general and administrative, profit, rental cars, and fully burdened, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

Option Line Item

BTD HEPA Filter Adjustment/Reseat Option Year 3

PER PWS 5.10:

Contractor shall include labor to adjust/remove/reseat any of the problematic HEPA filters.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

7 Each

Option Line Item

SPD HEPA Filter Adjustment/Reseat Option Year 3

PER PWS 5.10.1:

Contractor shall include labor to adjust/remove/reseat any of the problematic HEPA filters.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

2 Each

Option Line Item

BTD Class IIA BSC Option Year 4

See PWS (attached in FULL TEXT below)

5.1 - The contractor shall maintain and certify Class IIA biosafety Cabinet (BTD). Engineering Controls Certification IAW 385-69.

Certification includes, but not limited to, labor, repair, materials, parts, etc.

Quantity of 8 are Subject to Availability of Funds. See BTD Equipment list for Models, Building/Room Information, and SAF list.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

41 Each

Option Line Item

BTD Class II/Type A2 BSC Option Year

See PWS (attached in FULL TEXT below)

5.2 -The Contractor shall Maintain and certify Class II/Type A2 Biosafety cabinets; Engineering Controls Certification IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and

4 Each

Building/Room Information.

Pricing Arrangement: Firm Fixed Price

Option Line Item

SPD Class IIA BSC Option Year

BSC's at 3 locations: BDMSF (Bldg 4126), Georgia and Behind (South) Bldg 4126.

See PWS (attached in FULL TEXT below)

5.2.1 - The contractor shall maintain and certify Class IIA biosafety Cabinet (SPD). Engineering Controls Certification IAW 385-69.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

16 Each

Option Line Item

BTD Barrier Isolator Certification Option Year 4

See PWS (attached in FULL TEXT below)

5.3 - The contractor shall maintain and certify Barrier Isolators - Engineering controls certification

IAW 385-69.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

BTD Clean Bench Certification Option Year 4

See PWS (attached in FULL TEXT below)

5.4 - The contractor shall maintain and certify Clean Bench. Engineering controls certification IAW 385-69

Horizontal laminar flow "clean benches" are not BSCs. These pieces of equipment discharge HEPA-filtered air from the back of the cabinet across the work surface and toward the user. These devices only provide product protection. They can be used for certain clean activities, such as dust-free assembly of sterile equipment. Clean benches should never be used when handling cell culture material or when manipulating potentially infectious materials. The worker will be exposed to the material being manipulated on the clean bench potentially resulting in hypersensitivity, toxicity or infection depending on the materials being handled. Horizontal airflow "clean benches" must never be used as a substitute for a biological safety cabinet. Users must be aware of the differences between the two devices.

The contractor shall perform all field tests in accordance with the manufactures' test criteria and instructions. The contractor shall indicate on each test report that the manufacturer was contacted, and the test criteria was verified.

Maintenance/certification includes, but not limited to:

labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

Option Line Item

BTD Maintenance/Certification Class III Glove Box Option Year 4

See PWS (attached in FULL TEXT below)

5.5

- Maintenance and Certification of Class III glove boxes IAW latest edition BMBL (Biosafety in Microbiological and Biomedical Laboratories) NSF/ANSI 49.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

BTD HEPA Filters Option Year 4

See PWS (attached in FULL TEXT below)

5.5 - The contractor shall certify HEPA Filter Banks IAW latest edition BMBL (Biosafety in Microbiological and Biomedical Laboratories) -

NSF/ANSI 49

HEPA filters will be certified annually and after repair, movement, maintenance, or filter change; HEPA Filter Leak Test: This test is performed to determine the integrity of supply and exhaust HEPA filters, filter housing and filter mounting frames while the cabinet is operated at the nominal set point velocities. An aerosol in the form of generated particulates poly alpha olefin (PAO), di (2-ethylhexyl) sebecate, and polyethylene glycol and medical grade light mineral oil) is required for leak-testing HEPA filters and their seals. The aerosol is generated on the intake side of the filter and particles passing through the filter or around the seal are measured with a photometer on the discharge side. This test is suitable for ascertaining the integrity of all HEPA filters.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

QTY 1

Flanders Facility HEPA/2028 Exhaust is Subject to Availability of Funds.

See BTD Equipment list for Models and Building/Room Information.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

53 Each

Option Line Item

SPD Filtered Airflo Monitor (Powder Containment Hood) Certification Option Year 4

Labconco 3950501 Location: Behind (South) Bldg

See PWS (attached in FULL TEXT below)

5.7 - Airflo Monitor cabinet shall be certified annually and after repair, movement, maintenance or filter change. The contractor shall perform all field tests in accordance with the manufactures' test criteria and instructions. The contractor shall indicate on each test report that the manufacturer was contacted, and the test criteria was verified.

Maintenance/certification includes, but not limited to: labor, repair, materials, parts, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

1 Each

BTD Unscheduled Assessments Option Year 4

PER PWS 5.8: The contractor shall provide non-personal service to perform initial assessments for each emergency call-out to ascertain the level of effort and price required to conduct repairs, outside the manufacturer's recommended preventative maintenance requirements for any biosafety cabinet or HEPA filter. The assessment shall be a firm-fixed price to include all costs, i.e.

labor, parts, travel, general and administrative, profit, rental cars, and fully burdened etc. After unscheduled assessment is completed and provided to the COR, the repairs will be approved by the contracting officer with a contract modification.

(SUBJECT TO

AVAILABILITY OF FUNDS IN ACCORDANCE

WITH FAR 52.232-18)

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

4 Each

Option Line Item

SPD Unscheduled Assessments Option Year 4

PER PWS 5.8.1: The contractor shall provide non-personal service to perform initial assessments for each emergency call-out to ascertain the level of effort and price required to conduct repairs, outside the manufacturer's recommended preventative maintenance requirements for any biosafety cabinet or HEPA filter. The assessment shall be a firm-fixed price to include all costs, i.e.

labor, parts, travel, general and administrative, profit, rental cars, and fully burdened etc. After unscheduled assessment is completed and provided to the COR, the repairs will be approved by the contracting officer with a contract modification.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

2 Each

Option Line Item

BTD Regularly Scheduled Travel Option Year 4

PER PWS 5.9: Vendor to travel from home location to Dugway Proving Ground for an expected 3 times per year. If DPG requires unscheduled visits that can coincide with the standard maintenance, fewer than 3 trips may be required and this will be coordinated with the COR and the Contracting Officer. Regularly scheduled service shall be a firm-fixed-price to include all costs, i.e. labor, parts, travel, 3 Each rental cars, and fully burdened, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

Option Line Item

SPD Regularly Scheduled Travel Option Year 4

PER PWS 5.9.1: Vendor to travel from home location to Dugway Proving Ground for an expected 3 times per year. If DPG requires unscheduled visits that can coincide with the standard maintenance, fewer than 3 trips may be required and this will be coordinated with the COR and the Contracting Officer. Regularly scheduled service shall be a firm-fixed-price to include all costs, i.e. labor, parts, travel, general and administrative, profit, rental cars, and fully burdened, etc.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

3 Each

Option Line Item

BTD HEPA Filter Adjustment/Reseat Option Year 4

PER PWS 5.10:

Contractor shall include labor to adjust/remove/reseat any of the problematic HEPA filters.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

7 Each

Option Line Item

SPD HEPA Filter Adjustment/Reseat Option Year 4

PER PWS 5.10.1:

Contractor shall include labor to adjust/remove/reseat any of the problematic HEPA filters.

Product Service Code: J066 Pricing Arrangement: Firm Fixed Price

2 Each

Continuation of Description

Requirements BioSafety Cabinet Maintenance and Certification

Continuation of Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: See PRS/PWS

Place of Performance:

BIOTEST DIVISION

2029 BURNS ROAD

DUGWAY, UT 84022

DoDAAC: W91B94 CountryCode: USA

W6JR CCDC CHEM BIO CENTER

8500 OTTO RD, BLDG E4301

GUNPOWDER, MD 21010-0000

UNITED STATES

TBD

Email: TBD@army.mil Telephone: TBD

Inspection and Acceptance Location

Both Destination Instructions: See PRS/PWS

Place of Performance:

BIOTEST DIVISION

2029 BURNS ROAD

DUGWAY, UT 84022

DoDAAC: W91B94 CountryCode: USA

W6JR CCDC CHEM BIO CENTER

8500 OTTO RD, BLDG E4301

GUNPOWDER, MD 21010-0000

UNITED STATES

TBD

Email: TBD@army.mil Telephone: TBD

Inspection and Acceptance Location

Both Destination Instructions: See PWS/PRS

DoDAAC: W909NB CountryCode: USA

W30M USA DUGWAY PROVING GROUND

4223 2ND STREET, DUGWAY UT 84022-5000

DUGWAY, UT 84022-5000

UNITED STATES

Inspection and Acceptance Location

Both Destination Instructions: See PRS/PWS

Place of Performance:

BIOTEST DIVISION

2029 BURNS ROAD

DUGWAY, UT 84022

DoDAAC: W91B94 CountryCode: USA

W6JR CCDC CHEM BIO CENTER

8500 OTTO RD, BLDG E4301

GUNPOWDER, MD 21010-0000

UNITED STATES

TBD

Email: TBD@army.mil Telephone: TBD

Inspection and Acceptance Location

Both Destination Instructions: See PRS/PWS

Place of Performance:

BIOTEST DIVISION

2029 BURNS ROAD

DUGWAY, UT 84022

DoDAAC: W91B94 CountryCode: USA

W6JR CCDC CHEM BIO CENTER

8500 OTTO RD, BLDG E4301

GUNPOWDER, MD 21010-0000

UNITED STATES

TBD

Email: TBD@army.mil Telephone: TBD

Inspection and Acceptance Location

Both Destination Instructions: See PRS/PWS

Place of Performance:

BIOTEST DIVISION

2029 BURNS ROAD

DUGWAY, UT 84022

DoDAAC: W91B94 CountryCode: USA

W6JR CCDC CHEM BIO CENTER

8500 OTTO RD, BLDG E4301

GUNPOWDER, MD 21010-0000

UNITED STATES

TBD

Email: TBD@army.mil Telephone: TBD

Inspection and Acceptance Location

Destination Instructions: See PRS/PWS

Place of Performance:

BIOTEST DIVISION

2029 BURNS ROAD

DUGWAY, UT 84022

DoDAAC: W91B94 CountryCode: USA

W6JR CCDC CHEM BIO CENTER

8500 OTTO RD, BLDG E4301

GUNPOWDER, MD 21010-0000

UNITED STATES

TBD

Email: TBD@army.mil Telephone: TBD

Inspection and Acceptance Location

Both Destination Instructions: See PWS/PRS

DoDAAC: W909NB CountryCode: USA

W30M USA DUGWAY PROVING GROUND

4223 2ND STREET, DUGWAY UT 84022-5000

DUGWAY, UT 84022-5000

UNITED STATES

Inspection and Acceptance Location

Both Destination Instructions: See PRS/PWS

Place of Performance:

BIOTEST DIVISION

2029 BURNS ROAD

DUGWAY, UT 84022

DoDAAC: W91B94 CountryCode: USA

W6JR CCDC CHEM…