Targeted AoI Diesel Fuel Injector Pump Test Equipment 19May25.docx

Federal Agency: Army Office: Army Contracting Command-Red River Army Depot (ACC-RRAD) AoI Title: Diesel Fuel Injector Pump Test Equipment CSO AoI Number: AOI 004 AoI Release Date: 19 May 2025 Responses: See W911RQ-25-S-C0001-A001 for Procedure Details

1. General Information

1.1 Introduction

This announcement is for Diesel Fuel Injector Pump Test Stand / Area of Interest (AoI) under the ACC-RRAD Commercial Solutions Opening W911RQ-25-S-C0001-A001. Interested parties are highly encouraged to visit the Government Point of Entry (www.sam.gov) to review the ACC-RRAD CSO special posting in its entirety to obtain more information on the process for submission evaluation of the CSO AoI Responses.

This CSO AoI seeks to solicit innovative solutions that meet the objectives detailed in Sections 1.2 and 1.3. The term innovative is defined as any technology, process, or method, including research and development that is new as of the date of proposal submission; or any new application of an existing technology, process or method as of the proposal date.

ACC-RRAD is not obligated to extend a request for proposal or make an award as a result of this CSO AoI; all awards are subject to the availability of funds and successful negotiations. This CSO AoI is not an authorization to begin performance, and in no way obligates the Government for any costs incurred by the Offeror associated with developing a Response. Prior to commencement of any activities associated with performance under this CSO AoI, the Government will issue a written directive or contractual document signed by the Contracting Officer with appropriate consideration established. ACC-RRAD reserves the right to modify the requirements of this CSO AoI.

The authority to issue this CSO AoI is derived from ACC-RRAD Commercial Solutions Opening W911RQ-25-S-C0001-A001, dated 08 Oct 2024. The CSO authority is DFARS 212.70 - Defense Commercial Solutions Opening which implements 10 U.S.C 3458.

1.2 AoI Background

Currently, RRAD Secondary Business Unit performs the testing and repair of Stanadyne DB2 fuel injector pumps for the engine rebuild process. The current process includes a test stand that does not meet the demand in the workload required of the depot.

1.3 Improved Diesel Fuel Injection Test Equipment

RRAD is interested in a commercial solution that will give the depot the capability of performing a series of functionality tests determining if the Stanadyne DB2 pump will perform in accordance with predetermined criteria. The equipment shall be capable of testing all makes and models of fuel injection equipment, including automotive type in-line, rotary, and common rail pumps up to eight (8) cylinders. In addition, the stand shall be capable of testing EUI, EUP, and common rail injectors with the addition of adapter kits and accessories. The test stand shall include one (1) set of all accessories, adapters and special tooling required to test the Stanadyne DB2 fuel injector pumps in accordance with the vendor’s standard practice. The test stand must be able to read and test all 8 injector outputs simultaneously. Display must be read in American standard pressures, temperatures and all other aspects of the test. It must be locally serviced. It is preferred that the test stand be wired for American power so that no adapters are necessary. If water cooling is required, the vendor shall provide and install a stand-alone closed loop unit. The vendor will be responsible for shipping, unloading, rigging, installation and providing 40 hours of on-site training to RRAD personnel.

2. AoI Constraints

1. Any selected company/companies will be required to be registered in the System for Award Maintenance (sam.gov).

3. Submission Requirements A written solution must be sent in accordance with the Phase 1 instructions within the CSO, W911RQ25CS0001. Prepared Phase 1 solution shall be sent via e-mail submission by 1700 (5:00 PM CDT); 19 June 2025, with subject line stating INNOVATIVE SOLUTION Diesel Fuel Injector Pump Test Equipment to usarmy.rrad.acc.mbx.cso@army.mil.

Solution briefs received after the specified due date and time will be discarded and not be evaluated by the Government.

AoI Open Period – This AoI shall close at 5:00 P.M (CDT); 19 June 2025.

Point of contacts:

AoI questions can be sent to:

CSO Inbox: usarmy.rrad.acc.mbx.cso@army.mil Contracting Officer: christopher.l.johnston20.civ@army.mil Contracting Officer: travis.n.peterson2.civ@army.mil AoI Primary POC: jacob.j.horn.civ@army.mil AoI Secondary POC: adam.s.ragland.civ@army.mil AoI Additional POC: luke.j.leitschuck.civ@army.mil