2651_SELECTED_MATERIAL.pdf

SELECTED MATERIAL

SECTION 2651 Page 1 of 2

SECTION 2651

PART 1 GENERAL

1.1 REFERENCES

The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by basic designation only.

Arkansas State Highway and Transportation Department

Standard Specifications for Highway Construction (latest edition)

1.2 MEASUREMENT AND PAYMENT

Subsections 302.05 and 302.06 of the AHTD Standard Specifications for Highway Construction are NOT applicable. Measurement shall be by the ton for the items listed below, furnished and delivered to the various sites on the Pine Bluff Arsenal or areas on the Pine Bluff Arsenal.

Selected Material Class BAB(Bottom Ash Blend) Ton Selected Material Class (SM-2) Ton

1.3 STANDARD SPECIFICATIONS

Selected material shall conform to the provisions of Section 302 – SELECTED MATERIAL and all referenced sections therein of the Arkansas State Highway and Transportation Department “Standard Specifications for Highway Construction”, except as specified herein. Reference hereinafter to the Arkansas State Highway and Transportation Department “Standard Specifications for Highway Construction” will be by the basic designation “Standard Specifications”. The words “Chief Engineer” or “Engineer” in the Standard Specifications shall be interpreted to mean “Contracting Officer”. Copies of the Standard Specifications may be obtained from the Arkansas State Highway and Transportations Department, Little Rock, Arkansas, for approximately $10 per copy.

1.4 SUBMITTALS

The following shall be submitted in accordance with CONDITIONS, 3.0 SHOP AND

AS-BUILT DRAWINGS, SAMPLES, AND MANUFACTURER'S LITERATURE:

SD-07, Certificates of compliance

The Contractor shall furnish certificates of compliance with the requirements of Standard Specifications, Section 302.

PART 2 PRODUCTS

2.1 MATERIALS

Materials Class(SM-2) shall conform with the requirements provided under Section 302 of the Standard Specifications. BAB shall be a blend of bottom ash and fly ash byproducts from coal furnace combustion.

2.2 TESTS

All costs incurred in testing materials shall be borne by the Contractor.

SECTION 2651 Page 2 of 2

PART 3 EXECUTION

3.1 The selected material shall be furnished and delivered to the various sites and areas on the Pine Bluff Arsenal and end dumped neatly.

-- End of Section --