Technical Exhibit B REV 2 - WDTC MSS PWS Referenced Documents - 23 Dec 19.pdf

W91151‐20‐R‐0002

Technical Exhibit B (REV 2): PWS Referenced Documents

NOTE: The following documents are controlled documents and current as of the release date of the Request for Proposals (RFP) and Performance Work Statement (PWS). To gain access to the DPG website WDTC MSS link, an email request must be submitted to the DPG security office, Attn: jedediah.w.smith.civ@mail.mil, Security Specialist, 5450 Doolittle Ave, Dugway Proving Ground, Utah 84022-5002, (435) 831-2910. The request must state the company name, address, phone number, point of contact and purpose for access to documents and forms. Once the request has been reviewed and approved, the DPG security office will provide an access code.

Referenced Document PSW Paragraph International Organization for Standardization (ISO) 17025 General Requirements for the Competence of Testing and Calibration Laboratories

1.1.2, 1.2.4, 5.3.1.6.3

Army Regulation (AR) 50-6, Chemical Surety 1.6.8.2 AR 50-1, Biological Surety 1.6.11.1

AR 385-10, The Army Safety Program 1.6.11.2, 1.6.20.26,

1.6.20.27 DPG Regulation 350-104 1.6.11.2 DPG Regulation 385-104, Training and Certification Program for Hazardous Operations

1.6.11.2, 5.3.1.1

AR 600-85, Army Substance Abuse Program 1.6.14

DA PAM 385.69 1.6.15.10

DPGR 420-1, Housing Management 1.6.34 AR 40-3, Medical, Dental, and Veterinary Care 1.6.35.1 DPGR 420-8, Fire Prevention and Safety 3.3 AR 25-1, Army Information Technology 3.5 AR 750-43, Army Test, Measurement, and Diagnostic Equipment 5.1.18 AR 385-63, Range Safety 5.2.3 ATEC 385-1 Safety Program 5.2.3 DPGR 350-19, Range Operations 5.2.3 WD-OPD-001, M14 Leakage Tester for M40A1 V Protective Mask 5.3.3.4.2 WD-OPD-002, Issue, Turn-In and Maintenance of Protective Mask 5.3.3.4.2 WD-OPD-003, Issuing, Controlling and Maintaining TAP Clothing 5.3.3.4.2 WD-OPD-004, M4A1 Outlet Valve Leakage Detector 5.3.3.4.2 CTD-SOP-008, Chemical Hygiene Plan 5.3.1.4 International Organization for Standardization (ISO) 9000 Quality Management Systems

5.3.1.6, 5.3.1.6.3

International Organization for Standardization (ISO) 9001 Quality Management System

5.3.1.6, 5.3.1.6.3

CTD-MAN-010, Building 4165 Operations Manual 5.3.4.1 CTD-SOP-015, Procedure for Operation of Chemical and Biological Simulant Decon Facility

5.3.4.1

DP-0000-M-101, Chamber Facility Operations for BMTF and building 3445

5.3.4.1

W91151‐20‐R‐0002

CTD-SOP-001, Removal and Replacement of Filters 5.3.4.2 Regulatory Guide 1.140 5.3.4.2 AR 380-5 Department of the Army Information Security Program 5.4.8 AR 530-1, Operations Security 5.4.8 DMD-INS-003, Audit and Accountability (AU) Artifact 5.5.2.5 DMD-INS-004, Awareness and Training (AT) Artifact 5.5.2.5 DMD-INS-010, Media Protection (MP) Artifact 5.5.2.5, 5.5.2.10 DoD 8571.01-M, Information Assurance Workforce Improvement Program

5.5.2.12

AR 25-2, Information Assurance 5.5.2.12 AR 600-55, The Army Driver and Operator Standardization Program (Selection, Training, Testing and Licensing)

5.6.2.1

MIL-STD-810G, Environmental engineering Considerations and Laboratory Tests

5.6.4.2

TSD-SOP-002, Blowing Dust Chamber 5.6.4.2.1 TSD-SOP-003, Procedures for Operating of the JABT 5.6.4.2.1 TSD-SOP-004 Wind Machine SOP 5.6.4.2.1 DP-0000-F-109, Vibration System 5.6.4.2.1 DP-0000-M-104, Loose Cargo Transportation Simulator 5.6.4.2.1 DP-0000-M-108, Operation of the Salt Fog Chamber 5.6.4.2.1 DP-0000-M-164, Routine Operating Procedures and Safety Requirements for 20 and 30 Series Skid-Mounted Chambers

5.6.4.2.1

DP-0000-M-171, Operations of Mobile Conditioning Chambers 201-

5.6.4.2.1

DP-0000-M-172, Operations of Mobile Conditioning Chambers 301-

5.6.4.2.1