CLIN_0004_-_MODIFIED_-_17002C3120_v02.pdf

AA

A

B

7 6 5

C

D

8 7 6 5

4 3 2

THIRD ANGLE

PROJECTION

A

B

4 3 2

C

D

(R3.6 ) [92]

(1.7 ) [44]

NOTE 17

150 5

(11.5 )

11.5°

( 6.4 ) [164]

NOTE 6

.625 +.010 -.005

15,88 +0,25 -0,12[ ]

(10.24 ) [260,1]

(2.7 ) [68]

(4.4 ) [113]

.75 [19,1]

REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

- INITIAL RELEASE 2017-11-03

-v01 UPDATED SERVICE PORT CLOCK ANGLE AND NOTES 2018-04-30

-v02 CHANGED 3/8" NPT PORT TO 1/4" 2018-05-30

SCALE 1.000 WEIGHT 43.927 SHEET 1 OF 1

DEPARTMENT OF THE NAVY

UNITED STATES MARINE CORPS

TITLE

SPRING CHAMBER,

TYPE 1216, 1/4 NPT

PORT MODIFICATION

SIZE

D

CAGEC

01365

DWG NO.

17002C3120

REV.

-v02

DRAWN BY

DLT

DATE

2017-01-04

CHECKED BY

ERW

2017-11-03

ENGINEERED BY

DLT

2017-01-04

APPROVED BY

XXX

YYYY-MM-DD

CONTRACT NO.

M67854-12-G-0202

DESIGN ACTIVITY APPROVAL

APPROVED

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES

ONE PLACE (X) 0.03

TWO PLACE (XX) 0.02

THREE PLACE (XXX) 0.010

ANGLES 0.5

DO NOT SCALE THIS DRAWING

FOR INTERPRETATION OF DRAWING ASME Y14.100 APPLIES

REMOVE BURRS AND BREAK SHARP EDGES

MATERIAL

N/A

FINISH

SEE DRAWING NOTES

17002C3100 17002C3200 17002C4100 17002C4200 17002C5100 17002C5200 17002C0000

NEXT ASSY USED ON

APPLICATION

FOR INTERPRETATION OF DIMENSIONING

AND TOLERANCING SEE ASME Y14.5

MODIFICATION DRAWING

DISTRIBUTION STATEMENT D -

DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY;

COMPETITION SENSITIVE. OTHER REQUESTS FOR THIS DOCUMENT SHALL

BE REFERRED TO PROGRAM EXECUTIVE OFFICER LAND SYSTEMS, 2200

LESTER STREET, QUANTICO, VIRGINIA 22134. ATTN: PM M&HTV.

PARTS LIST

FIND

NO. QTY CAGE

CODE SPECIFICATION PART OR

IDENTIFYING NO.

NOMENCLATURE OR

DESCRIPTION

1 1 01365 17002C3121 SPRING CHAMBER, TYPE 1216

2 1 01365 17002C1130 WELD-ON PORT, 1/4 NPT

NOTES: UNLESS OTHERWISE SPECIFIED

1. REFER TO DRAWING 17002C3121 FOR TECHNICAL INFORMATION FOR

ORIGINAL BRAKE ACTUATOR.

2. PART IDENTIFICATION PER MIL-STD-130. MARK WITH PART NUMBER

"01365-17002C3120".

3. "TYPE" DESIGNATION REFERS TO THE NOMINAL AREA OF PISTON OR

DIAPHRAGM IN SQUARE INCHES, AS DEFINED IN FMVSS 121.

4. WELD IN ACCORDANCE WITH AWS D1.1/D1.1M.

5. INTERNAL BRAKE ACTUATOR COMPONENTS ARE NOT SHOWN.

MODIFICATION INSTRUCTIONS:

6. REMOVE THREAD PROTECTION CAP AND BAND CLAMP. SEPARATE PRESSURE

CHAMBER (PC) FROM NON-PRESSURE CHAMBER (NPC). REMOVE BRAKE CHAMBER

DIAPHRAGM ASSEMBLY AND RETAIN COMPONENTS.

7. REMOVE VENT PLUGS, INTERNAL RUBBER BOOT, AND RETAINING RING FROM

NPC AND DISCARD.

8. REMOVE COLLET NUT AND RETAIN.

9. REMOVE FINISH FROM NPC. SUGGESTED PROCESS: ABRASIVE BLASTING

IN ACCORDANCE WITH MIL-DTL-53072E.

10. PLUG WELD FOUR Ø .28 HOLES SHUT.

SUGGESTED PROCESS: GTAW

SUGGESTED FILLER METAL: AWS ER70S-2

11. DRILL HOLE FOR VENT PORT. INDICATED POINT MARKS HOLE CENTER.

POINT LIES ON SURFACE OF NPC.

12. WELD PORT FIND NO. 2 TO NPC.

SUGGESTED PROCESS: GTAW

SUGGESTED FILLER METAL: AWS ER70S-2

13. NO WELD OR FITTING SURFACE SHALL PROTRUDE INTO INTERIOR VOLUME OF NPC.

14. TEST NPC AT 10 PSI PER ASTM E515-11.

15. MASK INTERNAL THREADS ON NPC AND FINISH PER MIL-PRF-24635E TYPE V

CLASS 3, CHIP NUMBER 37030, BLACK. DIMENSIONS SHOWN APPLY PRIOR TO

FINISH.

16. VISUALLY INSPECT PC FOR FINISH SERVICABILITY. IF UNSERVICABLE,

FINISH PC PER MIL-PRF-24635E TYPE V CLASS 3, CHIP NUMBER 37030,

BLACK. DIMENSIONS SHOWN APPLY PRIOR TO FINISH.

17. CLOCK ANGLE OF SERVICE PORT IS WITH RESPECT TO HOLE CENTER OF VENT

PORT (POINT A).

18. REASSEMBLE COMPONENTS IN REVERSE ORDER OF DISASSEMBLY.

TORQUE FOR BAND CLAMP BOLT:

5/16-24 BOLT, GRADE 8: 18-23 FT-LB

3/8-16 BOLT, GRADE 8: 30-35 FT-LB

REPLACE BAND CLAMP FASTENER IF UNSERVICABLE.

SECTION A-A

SEE DETAIL A

NOTE 8

POINT A

DETAIL A

SCALE 2.000

NOTE 11

POINT A

NOTE 10

(TYP. 4 LOCATIONS)

NOTE 12 .13

robert.c.branch4 Line robert.c.branch4 Line robert.c.branch4 Line robert.c.branch4 Line robert.c.branch4 Line robert.c.branch4 Typewritten Text 27038 robert.c.branch4 Rectangle robert.c.branch4 Typewritten Text

DISTRIBUTION STATEMENT A

APPROVED FOR PUBLIC RELEASE. DISTRIBUTION IS UNLIMITED