ATT_006_MEO_D1326_FAN_VANEAXIAL.pdf

MAINTENANCE ENGINEERING ORDER

(AMCOM Reg. 750-2)

MEO NO.

DATE PAGE 1 of

TITLE Tolerances Unless otherwise noted, dimensions are in inches and tolerances are:

Fractional ………………… ± 1/32 Decimal ………………... ± 0.010 Angular ………………… ± ½°

APPLICABILITY CSI Critical Characteristic Affected?

Impact Statement Attached?

REFERENCES FOR RDECOM USE ONLY

DOCUMENT(S) AFFECTED

PURPOSE OR PROBLEM

PROJECT ENGINEER ENGINEERING REVIEW ENGINEERING RELEASE

MED FORM 5-DEC-09 1401-R-E

D 1326 Sep 8, 2014 3

Vaneaxial Fan Assembly (Combiner Transmission) Part Number 41360-2 (145DS518-6) Integrated Parts Breakdown Revision.

Administrative

INTERIM USE OF THIS MEO IS AUTHORIZED

UNTIL AFFECTED DOCUMENT IS UPDATED.

MEO CHANGE TYPE

4) Normal - Can be implemented with normal priorityPRIORITY IMPLEMENTATION CATEGORY

CH47 DAA

DMWR 55-4140-225 dated 30 August 2013

DOCUMENT CHANGE IS REQUIRED Verification: Hands-On Table-Top None

To modify DMWR 55-4140-225 Figure 3.2 and the associated parts table.

DINH.DEREK.

H.1232217053

Digitally signed by

DINH.DEREK.H.1232217053

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=DINH.DEREK.H.1232217053 Date: 2014.09.05 14:52:47 -05'00'

WILLIAS.PHILIP.

JOSEPH.110232

Digitally signed by

WILLIAS.PHILIP.JOSEPH.1102320146

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=CONTRACTOR, cn=WILLIAS.PHILIP.JOSEPH.1102320146 Date: 2014.09.04 09:32:08 -05'00'

Philip J. Willias (Camber Corporation)

PETER.ROBERT.

ARTHUR.JR.108

7823942

Digitally signed by

PETER.ROBERT.ARTHUR.JR.1087823942

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=PETER.ROBERT.ARTHUR.JR.108782394 Date: 2014.09.05 15:14:38 -05'00'

Derek Dinh Robert A. Peter, Jr.

PUBLICATION CHANGE REQUEST: REQUEST THAT THE FOLLOWING DATA BE INCLUDED IN THE NEXT

CHANGE OR REVISION TO THE PUBLICATION IDENTIFIED ABOVE.

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

3-21

3-22

3-2

3-2

REPLACE Figure 3-2 with the image on page 3 of this MEO.

REVISE Illustrated Parts Breakdown Table Information as follows:

Item 21 Part Number:

Description: SCREW, DRIVE Units per Assy: 8

Item 22 Part Number: 41387-1 Description: PLATE, INSTRUCTION Units per Assy: 1

Item 23 Part Number: MS21318-1 Description: SCREW, DRIVE Units per Assy: 2

Distribution Statement D:- Distribution authorized to Department of Defense and U.S. DoD contractors only to protect critical technology effective as of 26 June 2014. Other requests for this document must be referred to U.S. Army Aviation and Missile Research, Development and Engineering Center, ATTN: RDMR -AEM , Corpus Christi, TX 78419-5211

MED FORM 26 JUN 2014

Continuation Sheet

MEO NO.

PAGE of

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

MED FORM 15-DEC-09 1401-R-E

3-22 3-2 Item 24 Part Number: 41362-1 Description: HOUSING ASSEMBLY Units per Assy: 1

Item 25 Part Number: MS51991-205 Description: INSERT Units per Assy: 12

Item 26 Part Number: MS51990-105P Description: LOCKRING Units per Assy: 12

MED FORM 26 JUN 2014

D 1326

Formatted Cont. Sheet

Continuation Sheet

MEO NO.

PAGE of

MED FORM 15-DEC-09 1401-R-E

MED FORM 26 JUN 2014

D 1326

Formatted Cont. Sheet

RDMR-AEM

MEMORANDUM FOR RECORD:

SUBJECT: Impact of AED Maintenance Engineering Order (MEO) on maintenance using ,affecting system:

Enclosed MEO is issued by this office and is provided as part of our Technical Data user support mission.

4. THIS MEO CHANGES THE FOLLOWING (Check all that apply):

1.

Consumables

Materials

Expendables

Repairable Bill of Materials (RBOM)Impact

3. PRIORITY IMPLEMENTATION CATEGORY :

6. :

. Point of contact for this action is

2. FOR AMCOM ACQUISITION CENTER USE ONLY:

This MEO was written as a request from a contractor/KO on an active M&O contract.

Request that MEO be transmitted to the contractor as soon as possible.

b.Items checked in this area are considered Normal Priority Implementation Category.

Illustrated Parts Breakdown Change Mandatory Replacement Part

TSO/TSN Change Configuration Change

Publication New Change

Hardware Tooling Equipment

New/Revised Procedure/Process

Process Improvement Project Inspection

Special Process Testing Cost Savings a.Items checked in this area are considered High Priority Implementation Category.

5. Reason(s) MEO Written:

Other

Other

D 1326

DMWR 55-4140-225 dated 30 August 2013 CH47

D 1326

4) Normal - Can be implemented with normal priority

CCAD Request

No

Derek Dinh, RDMR-AEM Engineer, phone (361)-961-2039, email derek.h.dinh.civ@mail.mil

DINH.DEREK.H.123221705

Digitally signed by DINH.DEREK.H.1232217053 DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=DINH.DEREK.H.1232217053 Date: 2014.09.05 14:52:32 -05'00'