ATT_0009_MEO_D1775_FAN_VANEAXIAL.pdf

MAINTENANCE ENGINEERING ORDER

(AMCOM Reg. 750-2)

MEO NO.

DATE PAGE 1 of

TITLE Tolerances Unless otherwise noted, dimensions are in inches and tolerances are:

Fractional ………………… ± 1/32 Decimal ………………... ± 0.010 Angular ………………… ± ½°

APPLICABILITY CSI Critical Characteristic Affected?

Impact Statement Attached?

REFERENCES FOR RDECOM USE ONLY

DOCUMENT(S) AFFECTED

PURPOSE OR PROBLEM

PROJECT ENGINEER ENGINEERING REVIEW ENGINEERING RELEASE

MED FORM 5-DEC-09 1401-R-E

D 1775 Sep 30, 2015 1

Substitution, Addition, and Correction of Adhesives for Installation of Overhaul Data Plate P/N 41360-2 (145DS518-6)

Technical

INTERIM USE OF THIS MEO IS AUTHORIZED

UNTIL AFFECTED DOCUMENT IS UPDATED.

MEO CHANGE TYPE

4) Normal - Can be implemented with normal priorityPRIORITY IMPLEMENTATION CATEGORY

CH47 DAA

DMWR 55-4140-225 dated 30 Aug 2013 MECs D302786, D302782

DOCUMENT CHANGE IS REQUIRED Verification: Hands-On Table-Top None

To provide add, correct, and provide and alternative adhesive used for the overhaul data plate.

CASTILLO.NO

EL.1089736990

Digitally signed by

CASTILLO.NOEL.1089736990

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=CASTILLO.NOEL.1089736990 Date: 2015.09.25 11:05:25 -05'00'

OSBORN.NATHA

N.MILES.137431

Digitally signed by

OSBORN.NATHAN.MILES.1374314102

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=CONTRACTOR, cn=OSBORN.NATHAN.MILES.1374314102 Date: 2015.09.18 12:58:12 -05'00'

Nathan Osborn (Camber)

PETER.ROBERT.

ARTHUR.JR.108

7823942

Digitally signed by

PETER.ROBERT.ARTHUR.JR.1087823942

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=PETER.ROBERT.ARTHUR.JR.108782394 Date: 2015.09.29 11:58:10 -05'00'

Noel Castillo Robert A. Peter, Jr.

PUBLICATION CHANGE REQUEST: REQUEST THAT THE FOLLOWING DATA BE INCLUDED IN THE NEXT

CHANGE OR REVISION TO THE PUBLICATION IDENTIFIED ABOVE.

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

1-8

C-1

1-5.e

1-5.e.

(3)

1-5.e.

(5)

Delete second to last sentence

Change sentence to read:

"Peel paper backing from overhaul data plate or use adhesive (Item 3, Appendix C) or (Item 45, Appendix C)."

Change sentence to read:

"Seal the edges of overhaul data plate with one coat of clear epoxy coating (Item 9, Appendix C) or (Item 42, Appendix C)."

Change the first line of ITEM NO. 9 to read:

NATIONAL STOCK NUMBER: 8010-01-313-8702

U/M: KT

Change the second NATIONAL STOCK NUMBER on ITEM NO. 9 to read:

"8010-01-356-5170"

Distribution Statement D:- Distribution authorized to Department of Defense and U.S. DoD contractors only to protect critical technology effective as of 26 June 2014. Other requests for this document must be referred to U.S. Army Aviation and Missile Research, Development and Engineering Center, ATTN: RDMR -AEM , Corpus Christi, TX 78419-5211

MED FORM 18 NOV 2014