ATT_0012_MEO_D1833_FAN_VANEAXIAL.pdf
PDF 129 KB Posted
- Attached to
- FAN VANEAXIAL NSN 4140-01-311-6901
- Solicitation number
- W58RGZ19R0046
About this file
MEO D1833
View the file
Other files
Show all 18
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MAINTENANCE ENGINEERING ORDER
(AMCOM Reg. 750-2)
MEO NO.
DATE PAGE 1 of
TITLE Tolerances Unless otherwise noted, dimensions are in inches and tolerances are:
Fractional ………………… ± 1/32 Decimal ………………... ± 0.010 Angular ………………… ± ½°
APPLICABILITY CSI Critical Characteristic Affected?
Impact Statement Attached?
REFERENCES FOR RDECOM USE ONLY
DOCUMENT(S) AFFECTED
PURPOSE OR PROBLEM
PROJECT ENGINEER ENGINEERING REVIEW ENGINEERING RELEASE
MED FORM 5-DEC-09 1401-R-E
D 1833 Dec 30, 2015 1
Correct OIP 4 for Vaneaxial Fan Assembly (Combiner Transmission), P/N 41360-2 (145DS518-6)
Technical
INTERIM USE OF THIS MEO IS AUTHORIZED
UNTIL AFFECTED DOCUMENT IS UPDATED.
MEO CHANGE TYPE
4) Normal - Can be implemented with normal priorityPRIORITY IMPLEMENTATION CATEGORY
CH47 DAA
DMWR 55-4140-225 (30 AUG 2013) MEC D202094A 4 DEC 2015
MEC C144805A 25 JUL 2012
DOCUMENT CHANGE IS REQUIRED Verification: Hands-On Table-Top None
Modify ID measurement requisite for bearing liners in OIP 4.
CASTILLO.NO
EL.1089736990
Digitally signed by
CASTILLO.NOEL.1089736990
DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=CASTILLO.NOEL.1089736990 Date: 2015.12.17 09:11:22 -06'00'
CAREL.PAMELA.KA
Y
LYONS.1125864534
Digitally signed by CAREL.PAMELA.KAY
LYONS.1125864534
DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=CONTRACTOR, cn=CAREL.PAMELA.KAY
LYONS.1125864534
Date: 2015.12.17 08:24:27 -06'00'
Pamela Carel (Torch)
PETER.ROBERT.
ARTHUR.JR.108
7823942
Digitally signed by
PETER.ROBERT.ARTHUR.JR.1087823942
DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=PETER.ROBERT.ARTHUR.JR.108782394 Date: 2015.12.21 12:32:34 -06'00'
Noel Castillo Robert A. Peter, Jr.
PUBLICATION CHANGE REQUEST: REQUEST THAT THE FOLLOWING DATA BE INCLUDED IN THE NEXT
CHANGE OR REVISION TO THE PUBLICATION IDENTIFIED ABOVE.
WP NO. PAGE
NO.
PARA-
GRAPH
FIGURE/
TABLE
NO.
CHANGES
(EXACT WORDING OF CHANGES MUST BE GIVEN)
3-14 OIP 4 Change step #2, Ref A, Requisite to read:
"1.8508 inches maximum"
Distribution Statement D:- Distribution authorized to Department of Defense and U.S. DoD contractors only to protect critical technology effective as of 26 June 2014. Other requests for this document must be referred to U.S. Army Aviation and Missile Research, Development and Engineering Center, ATTN: RDMR -AEM , Corpus Christi, TX 78419-5211
MED FORM 04 DEC 2015
File details come from the government source that posted it.