ATT_0010_MEO_D1133_FAN_VANEAXIALpdf.pdf

MAINTENANCE ENGINEERING ORDER

(AMCOM Reg. 750-2)

MEO NO.

DATE PAGE 1 of

TITLE Tolerances Unless otherwise noted, dimensions are in inches and tolerances are:

Fractional ………………… ± 1/32 Decimal ………………... ± 0.010 Angular ………………… ± ½°

APPLICABILITY CSI Critical Characteristic Affected?

Impact Statement Attached?

REFERENCES FOR RDECOM USE ONLY

DOCUMENT(S) AFFECTED

PURPOSE OR PROBLEM

PROJECT ENGINEER ENGINEERING REVIEW ENGINEERING RELEASE

MED FORM 15-DEC-09 1401-R-E

D 1133 Oct 10, 2013 1

Administrative changes for Vaneaxial Fan Assembly (Combiner Transmission), P/N 41360-2 (145DS518-6).

Administrative

INTERIM USE OF THIS MEO IS AUTHORIZED

UNTIL AFFECTED DOCUMENT IS UPDATED.

MEO CHANGE TYPE

3) High - Has a business or process impactPRIORITY IMPLEMENTATION CATEGORY

CH47 DAA

DMWR 55-4140-225 (30 AUG 2013) TN 128122 10/31/2013

DOCUMENT CHANGE IS REQUIRED Verification: Hands-On Table-Top None

Incorporate changes not picked up in new publication.

CASTILLO.NOEL

.SR.1089736990

Digitally signed by

CASTILLO.NOEL.SR.1089736990

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=CASTILLO.NOEL.SR.1089736990 Date: 2013.10.07 16:18:42 -05'00'

CAREL.PAMELA.

KAY.1125864534

Digitally signed by

CAREL.PAMELA.KAY.1125864534

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=CONTRACTOR, cn=CAREL.PAMELA.KAY.1125864534 Date: 2013.10.04 08:16:13 -05'00'

Pamela Carel (Camber Corp)

DINH.DEREK.

H.1232217053

Digitally signed by

DINH.DEREK.H.1232217053

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=DINH.DEREK.H.1232217053 Date: 2013.10.07 16:20:49 -05'00'

Noel Castillo Derek Dinh PUBLICATION CHANGE REQUEST: REQUEST THAT THE FOLLOWING DATA BE INCLUDED IN THE NEXT

CHANGE OR REVISION TO THE PUBLICATION IDENTIFIED ABOVE.

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

ADD note before paragraph 3-19.e. to read:

"NOTE

To ease removal of bearing liner (8) a heat gun can be used to heat the housing assembly (24)."

ADD note before paragraph 3-19.h. to read:

"NOTE

To ease removal of bearing liner (12) a heat gun can be used to heat the housing assembly (24)."

Last sentence should read:

"Apply touch-up paint per Step 3-23.c.(6) to this rebalanced area surface and then check balance."

3-20

3-23

3-29

3-19.e.

3-19.h.

3-23.c.

(5)

Formatted Cont. Sheet

RDMR-AEM

MEMORANDUM FOR RECORD:

SUBJECT: Impact of AED Maintenance Engineering Order (MEO) on maintenance using ,affecting system:

Enclosed MEO is issued by this office and is provided as part of our Technical Data user support mission.

4. THIS MEO CHANGES THE FOLLOWING (Check all that apply):

1.

Consumables

Materials

Expendables

Repairable Bill of Materials (RBOM)Impact

3. PRIORITY IMPLEMENTATION CATEGORY :

6. Comments:

7. Point of contact for this action is

2. FOR AMCOM ACQUISITION CENTER USE ONLY:

This MEO was written as a request from a contractor/KO on an active M&O contract.

Request that MEO be transmitted to the contractor as soon as possible.

b.Items checked in this area are considered Normal Priority Implementation Category.

Illustrated Parts Breakdown Change Mandatory Replacement Part

TSO/TSN Change Configuration Change

Publication New Change

Hardware Tooling Equipment

New/Revised Procedure/Process

Process Improvement Project Inspection

Special Process Testing Cost Savings a.Items checked in this area are considered High Priority Implementation Category.

5. Reason(s) MEO Written:

Other

Other

D 1133

DMWR 55-4140-225 (30 AUG 2013) CH47

D 1133

3) High - Has a business or process impact

✔ Incorporate corrections for new publication.

CCAD Request

Pamela Carel, 361-961-1651/DSN 861-1651, Noel Castillo at commercial 361-961-1741, (DSN) 861-1741

CASTILLO.NOEL.SR.10897

36990

Digitally signed by CASTILLO.NOEL.SR.1089736990 DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=CASTILLO.NOEL.SR.1089736990 Date: 2013.10.07 16:17:48 -05'00'

Noel Castillo