attachment_0012_(2).pdf

PDF 664 KB Posted

Attached to
OVERHAUL OF CH47 TRANSMITTER, RATE
Solicitation number
W58RGZ-16-R-0269
Issued by

About this file

Attachment 0012

View the file

Other files

File Type Posted
attachment_0011_(2).pdf PDF
attachment_0007.pdf PDF
attachment_0008.pdf PDF
attachment_0005.pdf PDF
Attachment_0002_.pdf PDF
attachment_0013.pdf PDF
Exhibit_B_.pdf PDF
Exhibit_D.pdf PDF
attachment_0010_(2).pdf PDF
attachment_0009.mht MHT file
Exhibit_C.pdf PDF
Exhibit_A.pdf PDF
Attachment_0001.pdf PDF
16-R-0269_Final.pdf PDF
Attachment_0004.pdf PDF
Attachment_0006.pdf PDF
Attachment_0003_DMWR55-6620-326.pdf PDF
Exhibit_C_Quality_Deficiency_2_pgs_23JUL15.pdf PDF
Attachment_0008_-_MEO_T1356D.PDF PDF
Attachment_0003_DMWR55-6620-326.pdf PDF
Exhibit_A_ROD_2_pgs_23JUL15.pdf PDF
Attachment_0004_-_MEO_C4598.pdf PDF
Attachment_0001_Packaging_Requirement.pdf PDF
Attachment_0010_-_HQAMC-Level_Protest_Procedures_(October_2015).pdf PDF
Attachment_0009_-_TDPL.pdf PDF
Exhibit_B_Depot_Maintenance_2_pgs_23JUL15.pdf PDF
Attachment_0005_-_MEO_D1093A.pdf PDF
Attachment_0006_-_MEO_D1188.pdf PDF
Attachment_0007_-_MEO_D1255.pdf PDF
W58RGZ-16-R-0269_Final.pdf PDF
Attachment_0002_Document_Summary_List.pdf PDF
Show all 31

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

MAINTENANCE ENGINEERING ORDER

MEO NO.

(AMCOM Reg 750-11) DATE I PAGE 1 of

TITLE TOLERANCES

Unless otherwise noted, dimensions are in inches and tolerances are:

Fractional ...................... +/- 1/32 Decimal ......................... +/- .010 Angular .......................... +/- 112 degrees

APPLICABILITY CSI Critical Characteristic

INTERIM USE OF THIS MEO IS AUTHORIZED FOR DEPOT

MAINTENANCE UNTIL AFFECTED DOCUMENT IS UPDATED. REFERENCES FOR RDECOM USE ONLY DATE

DOCUMENT(S) AFFECTED

DOCUMENT CHANGE IS REQUIRED

PURPOSE OR PROBLEM

PROJECT ENGINEER ENGINEERING REVIEW ENGINEERING RELEASE

PUBLICATION CHANGE REQUEST: REQUEST THAT THE FOLLOWING DATA BE INCLUDED IN THE NEXT CHANGE OR

REVISION TO THE PUBLICATION IDENTIFIED ABOVE.

WP PAGE PARA- FIGURE TABLE CHANGES

NO. NO. GRAPH NO. NO. (EXACT WORDING OF CHANGE MUST BE GIVEN)

MED FORM 17-DEC-041401-R-E

KeeneyJD Sticky Note Marked set by KeeneyJD

KeeneyJD Sticky Note Marked set by KeeneyJD

KeeneyJD Sticky Note Marked set by KeeneyJD

Untitled

x:
meod1: T1356D
dd1: Oct 22 2009
tpgd1: 4
titd1: REQUEST FOR CONTRACTUAL WORK DEVIATION AND EXCEPTION
ybox: Off
nbox: Yes
ybut:
nbut:
docd1:
sysd1: AGENX
dtypd1: PPX
re1d1:
rd1d1:
re2d1:
rd2d1:
re3d1:
rd3d1:
prod1: To establish a request procedure for specified contractual work that needs to be performed using deviations and exceptions. REVISION A: To update office symbols in paragraph 2. REVISION B: To add form AMSAT-M 1379. REVISION C: To update office symbols in paragraph 2. REVISION D: To update the Deviations and Exceptions paragraph and update office symbols.
2009-10-22T11:15:41-0500
704a8b1d
SigPlus(r) Signature Capture
TestTag
pegd1: James J. Kernan
ered1:
2009-10-22T14:16:39-0500
704a8b1d
SigPlus(r) Signature Capture
TestTag
erld1: Humberto Hernandez Jr
wpd1:
pgd1:
pd1:
fd1:
td1:
chgd1: These instructions are for use by contractor personnel. They apply to requests for work deviations and exceptions, and take precedence over similar procedures specified in an applicable Depot Maintenance Work Requirement (DMWR). Care must be taken to assure that all active AMCOM Engineering Directives (AEDs), which are now called Maintenance Engineering Orders (MEOs), relevant to the DMWR have been considered.

Assure that all active AMCOM Engineering Directives (AEDs) or Maintenance Engineering Orders (MEOs) relevant to the DMWR have been implemented. Deviations and/or exceptions take precedence over similar procedures specified in application of the DMWR. When any work segment as set forth in a DMWR cannot be accomplished or can be accomplished only in a manner other than specified, use the following procedures:

chbard1:
insfd:
contind:
contindp:
meon2:
pgn2:
totn2:
wnon2:
pnon2:
prn2:
fnon2:
tbln2:
chgn2:
insfn2:
continn2d:
continn2p:
meop2:
pnop2:
totp2:
txt2p2:
insfp2:
continp2d:
continp2p:
meofn:
pgnofn:
totfn:
insfign:
butfn:
insffn:
continfnd:
continfnp:
figtext:
Deletep:
chbarn2:
reg: (AMCOM Reg 750-2)
reg1: (AMCOM reg 750-2)
P1:
n2meotemp:
meon2: T1356D
pgn2: 2
totn2: 4
wnon2:
pnon2:
prn2:
fnon2:
tbln2:
chgn2: 1. Contractors: The contractor shall submit a Request for Depot Engineering Support (AMSRD-AMR Form 1379), located in the back of this manual through the Contracting Officer to RDMR-AEM with a copy to AMSAM-MAV UT for UH60 aircraft and components; to SFAE-AV-CH-L for CH47 aircraft and components; to AMSAM-MMC-AV-AB for AH64 aircraft and components; to AMSAM-MMC-AV-SOT for OH58 aircraft and components. The request shall state the problems, the reason for urgency, and give the specifics listed below:

A. Serial Number (SN) if applicable, Part Number (PN) and National Stock Number (NSN) of the affected equipment.

B. Work elements that will not be completed or will not be accomplished as specified herein.

C. Reason for non accomplishment or deviation.

D. Action taken to correct the condition causing non accomplishment or need for deviation.

E. Data relative to non availability of parts required, if applicable.

F. Estimated man-hours.

G. Instructions and inspections required to maintain the integrity of the end item having such omission or deviation.

The form will be returned with the technical guidance requested.

2. DoD Depots: The depot will use the Engineering Support System (ESS) located on the web at https://ess.amrdec.army.mil/ and submit a Maintenance Engineering Call (MEC). The MEC will be returned with the technical guidance requested."

ADD the AMSRD-AMR Form 1379 as shown on pages 3 and 4 of this MEO to the back of this manual after the DA FORM 2028.

insfn2:
continn2d:
continn2p:
Deletep:
chbarn2:
reg1: (AMCOM reg 750-2)
P2:
fignmeotemp:
meofn: T1356D
pgnofn: 3
totfn: 4
insfign:
butfn:
insffn:
continfnd:
continfnp:
figtext:
Deletep:
reg1: (AMCOM reg 750-2)
P3:
fignmeotemp:
meofn: T1356D
pgnofn: 4
totfn: 4
insfign:
butfn:
insffn:
continfnd:
continfnp:
figtext:
Deletep:
reg1: (AMCOM reg 750-2)

File details come from the government source that posted it. Updated .