SOW GEAR CUTTING v2.docx
DOCX document 20 KB Posted
- Attached to
- Precision Gear and Spline Cutting
- Solicitation number
- W519TC26QA190
About this file
This is a Statement of Work (SOW) for external gear cutting finishing services supporting the United States Army Rock Island Arsenal - Joint Manufacturing Technology Center (RIA-JMTC). The vendor must perform final gear cutting operations on five unique part designs with a minimum required quantity of 108 parts total (18 units each of four part numbers and 36 units of one part number). The customer will supply semi-finished part blanks machined to near-net shape along with complete engineering drawings for each part. The vendor's responsibilities include receiving and inspecting the supplied blanks, performing precision gear cutting to final tooth profile and dimensional specifications, deburring all machined features, conducting final inspection, and packaging finished parts with required quality documentation.
The five gear designs specified in the SOW are: GEAR RING VARIABLE RECOIL (Drawing 10925680 REV J), GEARSHAFT BEVEL (Drawing 10953662 REV F), GEAR SECTOR (Drawing 10925678 REV G), GEARSHAFT BEVEL (Drawing 10923030 REV JZ01), and GEAR SPUR VARIABLE RECOIL (Drawing 10925679 REV G). All gear cutting must be performed in accordance with drawings and applicable spur gear data, bevel gear data, involute spline data, and timing callout specifications. The vendor must provide comprehensive quality control documentation including detailed gear inspection reports documenting single pitch deviation, total cumulative pitch deviation, profile deviation, helix deviation, runout, timing measurements, and tooth thickness; dimensional inspection reports confirming all tolerances; and a signed Certificate of Conformance from an authorized quality representative certifying compliance with all specified requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W519TC26QA19 P00002 SF 30.pdf | ||
| W519TC26QA190 P00001.pdf | ||
| SOW GEAR CUTTING v4.pdf | ||
| Vendor questions_Government Answers.xlsx | XLSX spreadsheet | |
| SOW GEAR CUTTING v3.pdf | ||
| W519TC26QA190.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Scope of Work: External Gear Cutting Finishing Services The scope of this project covers the gear cutting finishing services of five (5) unique part designs, with a required minimum quantity of 108 parts.
1. Project Overview & Scope of Services The customer will provide five (5) semi-finished part blanks to the vendor. The vendor's sole responsibility is to perform the final gear cutting operation to the specifications detailed in the engineering drawings and this document.
The scope of the vendor's services includes:
· Receiving and inspecting the customer-supplied semi-finished parts.
· Performing the gear cutting operation to achieve the final tooth profile and dimensions.
· Deburring all machined features.
· Conducting a final inspection to verify that the gear cutting meets all quality requirements.
· Packaging and returning the finished parts with the required quality documentation.
2. Customer-Supplied Items The customer will provide the following to the vendor:
· Five (5) semi-finished part blanks, machined to the near-net shape required for the gear cutting process.
· Complete engineering drawings for each of the five parts, detailing the final gear dimensions and tolerances.
3. Final Gear Specifications The vendor must finish the gear cutting on the five parts to meet the following final specifications:
| Drawing & Revision (REV) |
| Short Text |
| Gear Specifications by Drawing |
| 10925680 REV J |
| GEAR RING VARIABLE RECOIL |
| IAW DRAWING 10925680 - REV J SPUR GEAR DATA |
| 10953662 REV F |
| GEARSHAFT BEVEL |
| IAW DRAWING 10953662 REV F - IAW BEVEL GEAR DATA NOTE 8 AND TIMING CALL OUT SECTION C6 |
| 10925678 REV G |
| GEAR SECTOR MACH. |
| IAW DRAWING 10925678 REV FZ01- IAW SPUR GEAR DATA AND INTERNAL INVOLUTE & INTERNAL INVOLUTE SPLINE DATA |
| 10923030 REV JZ01 |
| GEARSHAFT BEVEL |
| IAW 10923030 REV JZ01 - IAW BEVEL GEAR DATA NOTE 10 AND TIMING CALL OUT SECTION F5 |
| 10925679 REV G |
| GEAR, SPUR VARIABLE RECOIL |
| IAW 10925679 REV G – IAW EXTERNAL SPUR GEAR DATA AND INTERNAL INVOLUTE SPLINE DATA |
4. Required Quality Control Documentation The vendor is required to perform a thorough inspection of their work and provide a documentation package with the returned parts. This package must include the following for each part:
| Document |
| Requirement |
| Gear Inspection Report |
| A detailed report of all gear tooth measurements taken after the cutting operation. This must include, at a minimum: single pitch deviation, total cumulative pitch deviation, total profile deviation, total helix deviation, runout, gear to gear and/or gear to spline timing, and tooth thickness. |
| Dimensional Inspection Report |
| A report confirming that all dimensions affected by the gear cutting process are within the tolerances specified on the engineering drawing. |
| Certificate of Conformance (CoC) |
| A document signed by an authorized quality representative from the vendor, certifying that the gear cutting services performed meet all requirements specified in the customer's drawings and this scope of work. |
5. Final Deliverables The vendor's final delivery to the customer will consist of:
1. A minimum of 108 parts, comprising 18 units of each of four-part numbers and one part number of 36 units with gear cutting completed, deburred, and cleaned.
2. A complete quality documentation package for each part, as detailed in Section 4.
Please let me know if you need to add or modify any details in this revised scope
File details come from the government source that posted it. Updated .