Attachment 24 Additional Solicitation and Contract Requirements No Restriction.pdf

Attachment 0024 Additional Solicitation and Contract

Requirements

1.ADMINISTRATIVE SPACE OCCUPIED BY CONTRACTORS AT PICATINNY

ARSENAL

In the event that the Contractor, in performing the requirements in the Statement of Work (SOW) under this contract, will occupy Government owned administrative space on the U.S. Army installation, Picatinny Arsenal, NJ, the Contractor shall provide the following information:

(1) Name of Contractor

(2) Contract number (including the task order number if applicable);

(3) Start date and end date of contract

(4) Name(s) of Contractor personnel occupying administrative space at Picatinny

(5) Building number being occupied

(6) Square footage required

(7) Current use of square footage

(8) Unit Identification Code (UIC) for the contracted employees

The information shall be reported within ten (10) days of award and shall be provided in accordance with the SOW and associated Contract Requirements Data List (CDRL) (DD 1423) and submitted to the following:

Garrison Space Manager:

Army Stationing Identification Program (ASIP) Manager:

Procuring Contracting Officer (PCO): Contracting Officer’s Representative (COR):

{PCO to insert the name, office symbol and email for the above at time of award.} .

2. SAFETY REQUIREMENTS FOR HAZARDOUS ITEMS

a. The contractor shall use the safety data provided in the Hazardous Component Safety Data

Sheets (HCSDS) to insure the safe handling of the energetic material. The HCSDS are in Section

J of the contract.

b. The contractor shall comply with Paragraph F, Chapter 1 of DOD 4146.26M, DOD

Contractor's Safety Manual for Ammunition and Explosives. This requires the contractor to submit all site and construction plans through the local Defense Contract Management District

Safety Office to the Contracting Officer for approval. The contractor must also submit changes for approval. Contractors will assure that their subcontractors follow the same procedures.

c. Whenever the contractor uses a government facility, he shall comply with the local safety requirements of that facility.

d. The contractor must obtain written approval from the Contracting Officer before the award of a subcontract involving explosives, propellants or pyrotechnic materials. When the contractor requests the Contracting Officer's approval, the Contracting Officer will arrange a Defense

Logistics Agency preaward safety survey for each subcontractor.

e. The contractor is responsible for decontaminating all facilities/equipment at the end of the contract unless the contractor intends to continue using the facilities/equipment for similar purposes. Any associated costs must be included as part of the contractor’s proposal. The contractor must provide the Contracting Officer with a certification that all contaminated facilities/equipment have been decontaminated.

f. The contractor is responsible for properly disposing of hazardous materials during this contract. If disposal is done on the subcontractor's site, the contractor must note this in his site plan per paragraph b, above. The Contracting Officer must approve a subcontractor prior to him performing disposal per paragraph d, above.

g. The contractor will provide reports of accidents/incidents as required by Data Item DI-SAFT-

81563. The government reserves the right to investigate any accident/incident under Chapter 2, Paragraphs F and G of DOD 4145.26M, DOD Contractor's Safety Manual for Ammunition and

Explosives.

3. RELEASE OF INFORMATION RESEARCH AND DEVELOPMENT

1. Classified Contracts - The DOD Security Agreement (DD Form 441) and DOD Contract

Security Classification Specification (DD Form 254) apply.

2. Unclassified Contracts-Restricted Release - Obtain the Contracting Officer's approval before releasing information received during this contract or generated from this contract, except if a college, university or laboratory receives the award and conducts the research on campus.

3. Unclassified Contracts-Unrestricted Release - You may release information received during the contract or developed from the contract without Contracting Officer's approval if:

a. you are a college, university/laboratory; and

b. you conduct the research on campus.

But, obtain approval before releasing the information if there is a high likelihood of revealing abilities of military systems or information concerning manufacturing technologies unique and critical to defense.

NOTE: Section J provides instructions for clearing technical material for release to the public and a sample clearance form (INME-PIC-IM Form 3002).

4. MATERIAL SAFETY DATA SHEETS (MSDS)

1. The contractor shall send the Material Safety Data Sheets (MSDS) prior to award to the

Contracting Officer and a copy with the first delivery of supplies to Commander, U.S. Army

ARDEC, ATTN: Safety Division, IMPI-SO, Bldg. 351 S., Picatinny Arsenal, NJ 07806-5000, required by FAR 52.223-3, Hazardous Material Identification and Material Safety Data.

2. Deliveries of any hazardous chemicals/materials will not be accepted when:

a. The applicable MSDS is not delivered with the first delivery of the supplies; and/or

b. The container label on the supplies is inadequate, unreadable, missing, or does not agree with the accompanying MSDS.