Attachment_0007_-_M205_Tripod_Special_Packaging_Instructions.pdf

DISTRIBUTION STATEMENT A, UNLIMITED 1 7

Previous editions are obsolete

13046100 MOUNT, TRIPOD, MACHINE GUN 19200 AM13046100

1005-01-586-5702 150209 B/L15K2007

1/EA 35.0 3.680 47.50 x 15.75 x 8.50

SEE BELOW FOR DETAILS

MOUNT, TRIPOD, MACHINE GUN (DEPLOYED)

MOUNT, TRIPOD, MACHINE GUN (CLOSED FOR PACKING)

DISTRIBUTION STATEMENT A, UNLIMITED 2 7

13046100 MOUNT, TRIPOD, MACHINE GUN 19200 AM13046100

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

1005-01-586-5702 150209 B/L15K2007

17. NOTES/DRAWINGS

SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREON OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH SPECIFICATION MIL-STD-2073-1 OR

AS OTHERWISE SPECIFIED HEREIN.

UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE IN INCHES. TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH

MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED.

* UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL- STD-2073-1 TO REMOVE ANY FOREIGN SUBSTANCE OR MATERIAL. DO NOT REMOVE ANY LUBRICATING OIL THAT IS

APPLIED TO ITEM DURING PRODUCTION.

1. GENERAL REQUIREMENTS

1.1 MATERIALS, METHODS, PROCESSES, AND PROCEDURES THAT ARE NOT SPECIFIED HERE SHALL

CONFORM TO THE REQUIREMENTS OF MIL-STD-2073-1.

1.2 IN ACCORDANCE WITH THE REQUIREMENTS OF INTERNATIONAL STANDARDS FOR PHYTOSANITARY

MEASURES (ISPM) 15, THE FOLLOWING COMMERCIAL HEAT TREATMENT PROCESS HAS BEEN

APPROVED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC) AND IS REQUIRED FOR ALL WOOD PACKAGING MATERIAL (WPM). WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. PACKAGING

MATERIALS EXEMPT FROM THE REQUIREMENTS ARE MATERIALS THAT HAVE UNDERGONE A

MANUFACTURING PROCESS SUCH AS CORRUGATED FIBERBOARD, PLYWOOD, PARTICLEBOARD,

VENEER AND ORIENTED STRAND BOARD. ALL WPM SHALL BE CONSTRUCTED FROM HEAT TREATED

(HT TO 56 DEGREES CENTIGRADE FOR 30 MINUTES) LUMBER AND CERTIFIED BY AN ACCREDITED

AGENCY RECOGNIZED BY THE ALSC IN ACCORDANCE WITH WOOD PACKAGING MATERIAL POLICY

AND WOOD PACKAGING MATERIAL ENFORCEMENT REGULATIONS (SEE URL:

HTTP://WWW.ALSC.ORG). ALL MATERIALS MUST INCLUDE CERTIFICATION MARKINGS IN

ACCORDANCE WITH ALSC STANDARDS AND BE PLACED IN AN UNOBSTRUCTED AREA THAT WILL BE READILY VISIBLE TO INSPECTORS. PALLET MARKINGS SHALL BE APPLIED TO THE STRINGER OR

BLOCK ON DIAGONALLY OPPOSITE SIDES AND ENDS OF THE PALLET AND BE CONTRASTING AND

CLEARLY VISIBLE. ALL DUNNAGE USED IN CONFIGURING AND/OR SECURING THE LOAD SHALL ALSO COMPLY WITH ISPM 15 AND BE MARKED WITH AN ALSC APPROVED DUNNAGE STAMP. FAILURE TO COMPLY WITH THE REQUIREMENTS OF THIS RESTRICTION MAY RESULT IN REFUSAL, DESTRUCTION, OR TREATMENT OF MATERIALS AT THE POINT OF ENTRY.

DISTRIBUTION STATEMENT A, UNLIMITED 3 7

SPECIAL PACKAGING INSTRUCTION (CONTINUATION SHEET)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis

Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO

NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.

13046100 MOUNT, TRIPOD, MACHINE GUN 19200 AM13046100

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

1005-01-586-5702 150209 B/L15K2007

17. NOTES/DRAWINGS

1.3 TAPE SHALL BE IN ACCORDANCE WITH ASTM D5486/D5486M.

1.4 UNLESS OTHERWISE SPECIFIED CUSHIONING SHALL BE IN ACCORDANCE WITH EITHER OF THE FOLLOWING: PPP-C-795, CELLULAR PLASTIC FILM CUSHIONING CLASS 1; OR A-A-3129, OPEN CELL PLASTIC CUSHIONING TYPE II, GRADE A; OR PPP-C-1797, POLYPROPYLENE FOAM CUSHIONING TYPE I;

OR COMMERCIAL EQUIVALENT.

1.5 CONTRACTOR SHALL BE COMPLIANT WITH DFARS 252.211-7006 PASSIVE RADIO FREQUENCY

IDENTIFICATION.

2. BILL OF MATERIALS

OPERATION

NUMBER

ITEM DETAILS AND SPECIFICATIONS QUANTITY

1 LUBRICATING, PRESERVATIVE OIL: MIL-PRF-3150

AS

REQUIRED

2 CUSHIONING: SEE 1.4

AS

REQUIRED

3 KINGPIN PLUG: A-A-59136 OR COMMERCIAL EQUIVALENT 1

4 BAG: MIL-DTL-22020, 55.0" X 18.0" (REF) 1

BOX: ASTM D5118/D5118M, FOL, V3c

I.D: 47.50” X 15.75” X 8.50”

6 FIBERBOARD, DOUBLE-WALL IAW ASTM D4727/D4727M

AS

REQUIRED

TECHNICAL MANUAL: TM 9-1005-437-13&P 1

BAG: MIL-DTL-117, CLASS B, 12.0" X 9.0" (REF) 1

8 ASTM D1974/D1974M, SEALING METHOD B

AS

REQUIRED

DISTRIBUTION STATEMENT A, UNLIMITED 4 7

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis

Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO

NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.

13046100 MOUNT, TRIPOD, MACHINE GUN 19200 AM13046100

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

1005-01-586-5702 150209 B/L15K2007

3. DETAILED PACKING INSTRUCTIONS

1. APPLY OIL, MIL-PRF-3150, TO TRIPOD.

2. WRAP TRIPOD FEET AND SPADES WITH CUSHIONING. SECURE WITH TAPE. DO NOT LET TAPE COME IN

CONTACT WITH ITEM.

3. INSERT FOAM KINGPIN PLUG INTO KINGPIN OPENING. SEE FIGURE 2 FOR MORE DETAIL.

4. PLACE TRIPOD INTO BAG AND SEAL.

5. PLACE TRIPOD INTO BOX.

6. BLOCK AND BRACE TRIPOD WITH DOUBLE-WALL FIBERBOARD. ENSURE BLOCKING AND BRACING FULLY

RESTRICTS MOVEMENT OF THE TRIPOD. SEE FIGURE 3 FOR REFERENCE PLACEMENT AND BLOCK AND

BRACE PATTERN.

7. PLACE TECHNICAL MANUAL IN BAG AND SEAL. (PREPACKAGED ITEMS NEED NOT BE REPACKAGED

BEFORE PLACEMENT INTO PACK.) PLACE BAGGED MANUAL INSIDE OF BOX.

8. CLOSE AND SEAL BOX.

DISTRIBUTION STATEMENT A, UNLIMITED 5 7

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis

Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO

NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.

13046100 MOUNT, TRIPOD, MACHINE GUN 19200 AM13046100

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

4. SPECIAL MARKING

1. CONTAINER SHALL BE MARKED ON TOP SURFACE IN MINIMUM ONE HALF INCH TEXT AS FOLLOWS:

“REUSABLE PACKAGING- DO NOT DESTROY” AND “ TO OPEN-CUT TAPE ONLY ALONG TOP TAPE

SEAMS”

5. UNITIZATION

1. PALLETIZE 15 CONTAINERS PER 48 X 48 HEAT TREATED WOOD PALLET AND SECURE WITH STRETCH

WRAP, COMMERCIAL STRAPPING, OR EQUIVALENT IN ACCORDANCE WITH MIL-STD-147. ENSURE

UNITIZED BOXES ARE PLACED EVENLY AND UNIFORMLY ON PALLET. (SEE FIGURE 1)

FIGURE 1: PALLETIZED LOAD

DISTRIBUTION STATEMENT A, UNLIMITED 6 7

SPECIAL PACKAGING INSTRUCTION (CONTINUATION SHEET)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis

Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO

NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.

13046100 MOUNT, TRIPOD, MACHINE GUN 19200 AM13046100

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

FIGURE 2: FOAM KINGPIN PLUG

DISTRIBUTION STATEMENT A, UNLIMITED 7 7

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis

Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO

NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.

13046100 MOUNT, TRIPOD, MACHINE GUN 19200 AM13046100

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

FIGURE 3: TRIPOD AND BLOCK AND BRACE PATTERN IN BOX