W15QKN17R0022-0004.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0004 2017JAN25

W15QKN

ARMY CONTRACTING COMMAND - NJ

PICATINNY ARSENAL, NJ 07806-5000

DONALD HOWARD GURRY

EMAIL: DONALD.H.GURRY.CIV@MAIL.MIL

W15QKN-17-R-0022

2016DEC01

X

X

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 11

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: DONALD HOWARD GURRY

Buyer Office Symbol/Telephone Number: ACC-NJ-MA/(973)724-4267

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

The reason for Amendment 0004 is to:

1. Provide questions and answers in Section A.

2. Add a narrative to Section H to incorporate changes that will be made to Performance Specification PRF16001A0006.

3. Add updated CDRLs dated 23 Jan 2017 in Section J. CDRL A023 has been added.

4. Add the following updated drawings to Section J:

- Drawing 408JXN00095B

- Drawing 408JXN00096B

- Drawing 408JXN00753

5. Update Section D Packaging and Marking.

6. All other terms and conditions of this solicitation remain in full force and effect.

*** END OF NARRATIVE A0006 ***

Questions and Answers continuned...

Question 36: Section L.4.2.2 (d)(2) states that the Component Suppliers Template is to include the date on the letter of commitment for the delivery of each product and subcomponent. However, there is no call out in the RFP that explicitly states that a Letter of

Commitment is required for each product and subcomponent. Is the inclusion of the Letter of Commitment date field on the template meant to be construed as requiring a Letter of Commitment or can this field be removed from the template?

Government Response: Section L.4.2.2 states that an Offeror needs to provide the date on the Letter of Commitment for each product and subcomponent. This field cant be removed from the template.

Question 37: Can the USG please provide clarification, with regard to drawing number 408JXN00096, as to whether or not Magazine Fillers with part number 11010484 are required as part of the bid submission or as part of the final package configurations for DVT or final production?

Government Response: The Magazine Filler will not be required for rounds submitted during bid sample or for the final package configurations.

*** END OF NARRATIVE A0007 ***

2 11

W15QKN-17-R-0022 0004

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION D - PACKAGING AND MARKING

CARTRIDGE, 5.56 MM, FRANGIBLE MK311 MOD3

2D Bar Codes Required

Detailed Packing Requirements:

The items will be packaged in accordance with 49 CFR, Parts 100-180.

Cartridges shall be packaged in point protector cartons in accordance with drawing 408JXN00095. Cartons shall be packaged in M2A2 ammunition containers in accordance with drawing 408JXN00096. Packed M2A2 ammunition containers shall be packaged in M2A2 wirebound boxes in accordance with drawing 408JXN00753. Drawings shall apply with changes as specified in attachment A.

Detailed Marking Requirements:

Point protector cartons shall be marked in accordance with drawing 408JXN00095. M2A2 ammunition containers shall be marked in accordance with drawing 408JXN00096. Wirebound boxes shall be marked in accordance with drawing 408JXN00753. Drawings shall apply with changes as specified in attachment A.

Detailed Unitization Requirements:

Wirebound wooden boxes shall be palletized and marked in accordance with drawings 19-48-4116 and 19-48-4116/5.

Standard:

Shipments of identical items going to the same destination shall be palletized if they have a total cubic displacement of 50 cubic feet or more unless skids or other forklift handling features are included on the containers. Pallet loads must be stable, and to the greatest extent possible, provide a level top for case of stacking. A palletized load shall be of a size to allow for placement of two loads high and wide in a conveyance. The weight capacity of the pallet muse be adequate for the load. THe preferred commercial expendable pallet is a 40 x 48 inch, 4-way entry pallet although variations may be permitted as dictated by the characteristics of the items being unitized. The load shall be contained in a manner that will permit safe handling during shipment and storage.

Forty eight (48) wirebound wooden boxes shall be palletized and marked in accordacnce with drawing 1948-4116 and appropriate unitization appendix to be provide by ARDEC Packaging. An option for a portion of the production deliveries may be exercised to utilize a commercial packing and unitization method.

Wood Packaging Materials:

Heat Treatment and Marking of Wood Packaging Materials - In accordance with the requirements of International Standards for

Phytosanitary Measures (ISPM) 15, the following commercial heat treatment process has been approved by the American Lumber Standards

Committee (ALSC) and is required for all Wood Packaging Material (WPM), WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process such as corrugated fiberboard, plywood, particleboard, veneer and oriented strand board.

All WPM shall be constructed from Heat Treated (HT to 56 degreees Centigrade for 30 minutes) lumber and certified by an accredited agency recognized by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging Material Enforcement regulations

(see URL: http://www.alsc.org). All materials must include certification markings in accordance with ALSC standards and be placed n an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides and ends of the pallet and be contrasting and clearly visible. All dunnage used in configuring and /or securing the load shall also comply with ISPM 15 and be marked with an ALSC approved DUNNAGE stamp. Failure to comply with the requiremetns of this restriction may result in refusal, destruction., or treatment of materials at the point of entry.

Marking:

All unit packages, intermediate packs, exterior shipping containers, and, as applicable, unitized loads shall be marked in accordance with MIL-STD-129 including bar coding. The contractor is responsible for application of special markings as discussed in the Military

Standard regardless of whether specified in the contract or not. Special markings include, but are not limited to, shelf-life markings, structural markings, and transportation special handling markings. The marking of pilferable and sensitive material will not identify the nature of the material. NOTE: Passive RFID tagging is required in all contracts that contain DFARS clause 252.211-

7006. Contractors must check the solicitation and/or contract for this clause. For details and most recent information, see http://www.acq.osd.mil/log/rfid/index.htm for the current DoD Suppliers' Passive RFID iInformation Guide and Supplier Implementation

Plan. If the item has Unique Item Identifieer (UII) markings then UII needs to be 2D bar coded and applied on the unit package, intermediate an dexterior containers, and the unit load.

Contractors and vendors shall apply indentification and address markings with bar codes in accordance with MIL-STD-129. For shipments moving to overseas locations and for mobile deployable units, the in-the-clear address must also include the host country geographic address and the APO/FPO address. The MSL will include both linear and 2D bar codes per the standard. The DD Form 250 or the commercial packing list shall have barcodes applied as per Direct Vendor Delivery Shipments in the standard (except for deliveries to DLA

Distribution Depots, e.g. New Cumberland, San Joaquin, Red River, Anniston). Packing lists are required in accordance with the standard, see paragraph 5.3.

3 11

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Military Shipping Label:

Commercial software may be used to generate a Military Shipment Label/Issue Receipt Document (MSL/IRRD) including the required Code 39 and 2D (PDF417) bar codes. However, the commercial sofware must produce labels/documents which comply with the requirements of MIL-STD-

129. Contractors shall insure that the "ship to" and "mark for" in-the-clear delivery address is complete including: consignee's name, organization, department name, office, building, room, street address, city, state, country code, & DODAAC. Two contractors have introduced a version of the MSL softwware taht can be purchased by contractors. Both programs produce labels that appear to be inhttp://milpac.com/ and Easysoft Corporation http://easysoftcorp.com/ (Army developed software, for creating MSL/IRRD previously available to those with government contracts in no longer supported.)"

Performance-Oriented Packaging: Prior to marking and shipment, the contractor shall ensure that the container has been tested by a

U.S. Government approved Performance-oriented Packaging (POP) test laboratory in compliance with POP requirements in accordance with

Title 49, Code of Federal Regulations. The test will be conducted to a weight of at least 10% greater than the gross package (pack out) weight or to the specified POP certification weight listed on the corresponding Packing and Marking drawing(s), whichever is greater.

- The POP test report shall be prepared by the POP test laboratory in accordance with DI-PACK-81059 (Data Item Descripton) IAW

Part 178, CFR 49 with the appropriate POP marking of the test laboratory.

- The report must be submitted to the U.S. Government for approval as directed in tehe contract data requirement list

(CDRL) DD Form 1423.

- The U.S. DoD POP symbol shall not be applied to the container unless the Government approves the contractor's test report and authorizes to apply the DoD POP symbol to the container.

- For multi-year contracts, the contractor shall re-perform the POP testing at a U.S. Government approved Performance-oriented

Packaging (POP) test laboratory IAW CFR 49 if:

- The inital POP test report expires before the end of the contract (single pack POP certification is valid for a period of 1 year;

combination pack POP certification is valid for a period of 2 years).

- There is a change in container manufacturer, design, or manufacturing processes of the container.

EXCEPTON TO POP MARKINGS: If the container is manufactured outside the USA, the contractor/container manufacturer shall be responsible to perform the POP certification tests IAW the United Nations Recommendations on the Transport of Dangerous Goods and apply the marking authorized by the Transportation Competent Authority of the country of manufacture.

TRANSPORTATION:

ITEM NOMENCLATURE: Cartridge, 5.56mm, Frangible Mk311 Mod 3

Estimated weight of the item in its shipping container

Greater than 2500 pounds but less than 30,000 pounds (In Palletized Configuration)

Unclassified

DOT Container Marking: Cartridges, Small Arms UN0012

Hazard Classification (Explosives only): 1.4S

DOT Marking/Hazard Classification will be determined under contract

(AA&E) Category IV

CARTRIDGE, 5.56MM, M855 REFERENCE ROUNDS

2D Bar Codes Required

The items will be packaged in accordance with 49 CFR, Parts 100-180.

Detailed Packing Requirements:

Cartridges shall be packing in cartons in accordance with drawing 12561442-7. Cartons shall be packed in M2A2 containers in accordance with draing 9345239-6. M2A2 containers shall be packed in wirebound boxes in accordance with drawing 12551963-12.

Detailed Marking Requirements:

Cartons shall be marked in accordance with drawing 12561442-7. M2A2 containers shall be marked in accordance with dreaing 9345239-6.

Wirebound boxes shall be marked in accordance with drawing 12551963-12.

4 11

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Detailed Unitization Requirements;

Wirebound wooden boxes shall be palletized and marked in accordance with drawings 19-48-4116 and 19-48-4116/5.

Standard:

Shipments of identical items going to the same destination shall be palletized if they have a total cubic displacement of 50 cubic feet or more unless skids or other forklift handling features are included on the containers. Pallet loads must be stable, and to the greatest extent possible, provide a level top for case of stacking. A palletized load shall be of a size to allow for placement of two loads high and wide in a conveyance. The weight capacity of the pallet muse be adequate for the load. THe preferred commercial expendable pallet is a 40 x 48 inch, 4-way entry pallet although variations may be permitted as dictated by the characteristics of the items being unitized. The load shall be contained in a manner that will permit safe handling during shipment and storage.

Forty eight (48) wirebound wooden boxes shall be palletized and marked in accordacnce with drawing 1948-4116 and appropriate unitization appendix to be provide by ARDEC Packaging. An option for a portion of the production deliveries may be exercised to utilize a commercial packing and unitization method.

Wood Packaging Materials:

Heat Treatment and Marking of Wood Packaging Materials - In accordance with the requirements of International Standards for

Phytosanitary Measures (ISPM) 15, the following commercial heat treatment process has been approved by the American Lumber Standards

Committee (ALSC) and is required for all Wood Packaging Material (WPM), WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process such as corrugated fiberboard, plywood, particleboard, veneer and oriented strand board.

All WPM shall be constructed from Heat Treated (HT to 56 degreees Centigrade for 30 minutes) lumber and certified by an accredited agency recognized by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging Material Enforcement regulations

(see URL: http://www.alsc.org). All materials must include certification markings in accordance with ALSC standards and be placed n an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides and ends of the pallet and be contrasting and clearly visible. All dunnage used in configuring and /or securing the load shall also comply with ISPM 15 and be marked with an ALSC approved DUNNAGE stamp. Failure to comply with the requiremetns of this restriction may result in refusal, destruction., or treatment of materials at the point of entry.

Marking:

All unit packages, intermediate packs, exterior shipping containers, and, as applicable, unitized loads shall be marked in accordance with MIL-STD-129 including bar coding. The contractor is responsible for application of special markings as discussed in the Military

Standard regardless of whether specified in the contract or not. Special markings include, but are not limited to, shelf-life markings, structural markings, and transportation special handling markings. The marking of pilferable and sensitive material will not identify the nature of the material. NOTE: Passive RFID tagging is required in all contracts that contain DFARS clause 252.211-

7006. Contractors must check the solicitation and/or contract for this clause. For details and most recent information, seehttp://www.acq.osd.mil/log/rfid/index.htm for the current DoD Suppliers' Passive RFID iInformation Guide and Supplier

Implementation Plan. If the item has Unique Item Identifieer (UII) markings then UII needs to be 2D bar coded and applied on the unit package, intermediate an dexterior containers, and the unit load.

Contractors and vendors shall apply indentification and address markings with bar codes in accordance with MIL-STD-129. For shipments moving to overseas locations and for mobile deployable units, the in-the-clear address must also include the host country geographic address and the APO/FPO address. The MSL will include both linear and 2D bar codes per the standard. The DD Form 250 or the commercial packing list shall have barcodes applied as per Direct Vendor Delivery Shipments in the standard (except for deliveries to DLA

Distribution Depots, e.g. New Cumberland, San Joaquin, Red River, Anniston). Packing lists are required in accordance with the standard, see paragraph 5.3.

Military Shipping Label:

Commercial software may be used to generate a Military Shipment Label/Issue Receipt Document (MSL/IRRD) including the required Code 39 and 2D (PDF417) bar codes. However, the commercial sofware must produce labels/documents which comply with the requirements of MIL-STD-

129. Contractors shall insure that the "ship to" and "mark for" in-the-clear delivery address is complete including: consignee's name, organization, department name, office, building, room, street address, city, state, country code, & DODAAC. Two contractors have introduced a version of the MSL softwware taht can be purchased by contractors. Both programs produce labels that appear to be inhttp://milpac.com/ and Easysoft Corporation http://easysoftcorp.com/ (Army developed software, for creating MSL/IRRD previously available to those with government contracts in no longer supported."

Performance-Oriented Packaging: Prior to marking and shipment, the contractor shall ensure that the container has been tested by a

U.S. Government approved Performance-oriented Packaging (POP) test laboratory in compliance with POP requirements in accordance with

Title 49, Code of Federal Regulations. The test will be conducted to a weight of at least 10% greater than the gross package (pack out) weight or to the specified POP certification weight listed on the corresponding Packing and Marking drawing(s), whichever is greater.

5 11

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

- The POP test report shall be prepared by the POP test laboratory in accordance with DI-PACK-81059 (Data Item Descripton) IAW

Part 178, CFR 49 with the appropriate POP marking of the test laboratory.

- The report must be submitted to the U.S. Government for approval as directed in tehe contract data requirement list

(CDRL) DD Form 1423.

- The U.S. DoD POP symbol shall not be applied to the container unless the Government approves the contractor's test report and authorizes to apply the DoD POP symbol to the container.

- For multi-year contracts, the contractor shall re-perform the POP testing at a U.S. Government approved Performance-oriented

Packaging (POP) test laboratory IAW CFR 49 if:

- The inital POP test report expires before the end of the contract (single pack POP certification is valid for a period of 1 year;

combination pack POP certification is valid for a period of 2 years).

- There is a change in container manufacturer, design, or manufacturing processes of the container.

EXCEPTON TO POP MARKINGS: If the container is manufactured outside the USA, the contractor/container manufacturer shall be responsible to perform the POP certification tests IAW the United Nations Recommendations on the Transport of Dangerous Goods and apply the marking authorized by the Transportation Competent Authority of the country of manufacture.

TRANSPORTATION:

ITEM NOMENCLATURE: Cartridge, 5.56mm, M855 Reference Rounds

Quantity 3280 M855 Reference Rounds (NSN 1305-01-155-5456), to be delivered within 60 days after contract award.

Estimated Weight of item in its shipping container:

Less than 200 pounds

Unclassified

DOT Container Marking: Cartridges, Small Arms UN0012

Hazard Classification (Explosives only): 1.4S

DOT Marking/Hazard Classification will be determined under contract

AA&E Category IV

M16A4 and M4A1 WEAPONS FOR CARTRIDGE, 5.56MM, FRANGIBLE MK311 Mod 3, AA40

2D Bar Codes Required

Detailed Packing Requirements:

Packaging for each individual item shall be in accordance with that items specific Special Packaging Instruction: M4A1(NSN: 1005-01-

383- 0953) per document AM12972700, M16A4(NSN: 1005-01-383-2872) per document AM12973001.

Detailed Marking Requirements:

Mark the Shipment for: TBD upon contract award.

Wood Packaging Materials:

Heat Treatment and Marking of Wood Packaging Materials - In accordance with the requirements of International Standards for

Phytosanitary Measures (ISPM) 15, the following commercial heat treatment process has been approved by the American Lumber Standards

Committee (ALSC) and is required for all Wood Packaging Material (WPM), WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process such as corrugated fiberboard, plywood, particleboard, veneer and oriented strand board.

All WPM shall be constructed from Heat Treated (HT to 56 degreees Centigrade for 30 minutes) lumber and certified by an accredited agency recognized by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging Material Enforcement regulations

(see URL: http://www.alsc.org). All materials must include certification markings in accordance with ALSC standards and be placed n an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides and ends of the pallet and be contrasting and clearly visible. All dunnage used in configuring and /or securing the load shall also comply with ISPM 15 and be marked with an ALSC approved DUNNAGE stamp. Failure to comply with the requiremetns of this restriction may result in refusal, destruction., or treatment of materials at the point of entry.

Marking:

All unit packages, intermediate packs, exterior shipping containers, and, as apllicable, unitized loads shall be marked in accordance with MIL-STD-129, Revision R, dated February, 2014, including bar coding. The contractor is responsible for application of special

6 11

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

markings as discussed in the Military Standard regardless of whether specified in the contract or not. Special markings include, but are not limited to, shelf-life markings, structural markings, and transportation special handling markings. The marking of pilferable and sensitive material will not identify the nature of the material. NOTE: Passive RFID tagging is required in all contracts that contain DFARS clause 252.211-7006. Contractors must check the solicitation and/or contract for this clause. For details and most recenthttp://www.acq.osd.mil/log/rfid/index.htm for the current DoD Suppliers' Passive RFID iInformation Guide and Supplier

Implementation Plan. If the item has Unique Item Identifieer (UII) markings then UII needs to be 2D bar coded and applied on the unit package, intermediate an dexterior containers, and the unit load.

TRANSPORTATION:

Nomenclature of item(s) being procured.

M16A4 Rifles

6/EA M16A4 Rifles (NSN: 1005-01-383-2872, P/N: 12973001)

Destination of delivered items. (If more than one destination, list all)

TBD after contract award

Estimated weight of the item in its shipping container:

Less than 200 pounds

Unclassified

Non Hazardous (No DOT Marking Required)

AA&E Category II

REVISON TO DRAWINGS:

408JXN00753

Zone D8, Note 1

Change

From: \'85BLACK NO. 37038, TYPE II, III, OR IV, SPEC A-A-208.

To: \'85BLACK NO. 37038, SPEC A-A-59383.

Zone C8, Note P2

Change

From: PACK TWO M2A1 OR M2A2 BOXES\'85

To: PACK TWO M2A2 BOXES\'85

Zone A5, ESTIMATED WEIGHT, ITEM NO. 3

Change

From: BOX, AMMUNITION, M2A1 OR M2A2, EMPTY (2)

To: BOX, AMMUNITION, M2A2, EMPTY (2)

Zone C8, Note P5

Change

From: APPLY METALLIC SEAL (FIND NO. 4) TO WIREBOUND BOX AS SHOWN ON DWG. 19200-8594163. SEAL SHALL BE LOCATED ON THIRD WIRE FROM LEFT.

To: APPLY METALLIC SEAL (FIND NO. 4) PER DRAWING 19200-8794342 TO WIREBOUND BOX IN ACCORDANCE WITH DRAWING 19200-12977298-3. SEAL SHALL

BE LOCATED ON THIRD WIRE FROM LEFT.

Zone A8, Detail B

Marking shall be as follows:

1680 CRTG 5.56MM

SEMI-JACKETED FRANGIBLE

MK311 MOD 3

CARTONS

* AA40

WT ** LBS

LOT ***

* Insert National Stock Number, Column F

** Insert Gross Weight, M10

*** Insert Lot Number, M11

Zone C6, COLUMN B

Change

From: BOX, AMMO M2A1 OR M2A2, PACKED

7 11

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

To: BOX, AMMO M2A2, PACKED

Zone B1-8, TABLE

Add Line No. 18 as follows:

Line No. Part No. Box, Ammo M2A2, Packed # of Cartridges Cartridge

18 12255-408JXN00753-18 12255-408JXN00096-6 1680 5.56MM SEMI- JACKETED

Nomenclature General Marking NSN DODIC Ref. Data Cartridge Part No.

FRANGIBLE Mk 311 MOD 3 NSN TBD AA40 16001A0006

408JXN00096

Zone D8, Note 4

Change

From: \'85WHITE NO. 37875, TYPE I OR III, (FIND NO. 10) SPEC A-A-208\'85

To: \'85WHITE NO. 37875, SPEC A-A-59383\'85

Zone B1, Parts List, Find No. 10

Change

From: A-A-208

To; A-A-59383

Zone A2, Title Block

Change

From: PACKING AND MARKING FOR M2A1 OR M2A2 AMMO BOX, 5.56MM

To: PACKING AND MARKING FOR M2A2 AMMO BOX, 5.56MM

Zone A1-4, Parts List

Remove Find No. 2 Line (BOX, AMMUNITION, M2A1 ASSEMBLY)

Zone C4 and D5

Remove drawing callouts for Find No. 2

Zone C8, Note 7

Remove Note 7

Zone C8, Note P2

Change

From: \'85FILLED CARTONS, 5.56MM (FIND NO. 1), INTO BOX, AMMUNITION, M2A1 (FIND NO. 2) OR M2A2 (FIND NO. 11).

To: \'85FILLED CARTONS, 5.56MM (FIND NO. 1), INTO BOX, AMMUNITION, M2A2 (FIND NO. 11).

Zone C8, Note P3

Change

From: \'85BOTTOM OF M2A1 (FIND NO. 2) OR M2A2 (FIND NO. 11).

To: \'85BOTTOM OF M2A2 (FIND NO. 11).

Zone B8, Note P10

Change

From: \'85IN ACCORDANCE WITH DRAWING 19200-12977298.

To: \'85IN ACCORDANCE WITH DRAWING 19200-12977298-1.

Zone A4-8, Table

Add Line No. 6 as follows:

Line No. Part No. Box, Ammo M2A2, Packed # of Cartridges Cartridge

6 12255-408JXN00096-6 12255-408JXN00095-6 840 SEMI- JACKETED

Nomenclature General Marking NSN and DODIC

FRANGIBLE Mk 311 MOD 3 NSN TBD AA40

408JXN00095

Zone D8, Note 1

8 11

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Change

From: MATERIAL: INK, STENCIL, BLACK, TYPE II OR TYPE III. COLOR NO. 37038 PER SPEC A-A-208 (FIND NO. 4). SEE NOTE 2.

To: MATERIAL: INK, STENCIL, BLACK, COLOR NO. 37038 PER SPEC A-A-59383 (FIND NO. 4). SEE NOTE 2

Zone A2, PARTS LIST, FIND NO. 4

Change

From: A-A-208

To: A-A-59383

Zone B7

Change

From: CART

To: CRTG

Zone C3

Change

From: CART

To: CRTG

Zone D1-4, Table

Add Line as follows:

Part No. Cartridge Drawing Nomenclature General Marking

12255-408JXN00095-6 16001A0006 Semi-Jacketed Frangible MK311 MOD 3

NSN & DODIC

NSN TBD AA40

*** END OF NARRATIVE D0001 ***

9 11

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION H - SPECIAL CONTRACT REQUIREMENTS

The following information will be updated in Performance Specification PRF16001A0006 or language will be added to resultant contract to allow for the deviations:

1. The port pressure requirement in Specification PRF16001A0006, Section 3.5.15 will be removed.

2. Section 3.5.3 of Specification will be changed from 63,700 psi to 65,700 psi.

3. Appendix C of Specification PRF16001A0006, specifically C.2 Equipment, C.2.1 Barrel, will be changed to state that three (3) 5.56

NATO accuracy barrels are to be used for testing.

4. In Section 3.5.4 of Specification PRF16001A0006, the word "average" will be removed. In addition, Note 11/ in Table III will be changed to Accept/reject is 0/1. Furthermore, Note 10/ in Table IV will be changed to Accept/reject is 0/1. Finally, Note 4/ in Table V will be updated to state: If the extraction force fails to meet the applicable requirement with the accept/reject criteria of 0/3, then a second sample consisting of double the number of cartridges in the first sample shall be tested. The lot shall be rejected if the cartridges in the combined first and second sample fail to meet the requirement with an accept/reject criteria of 2/3.

5. In Table V, Note 14 of Specification PRF16001A0006, the sentence in Note 14 The retest shall be fired at 600 yards will be removed.

6. In Table V, the inspection method will be changed from 4.5.4 to 4.4.4. In Table V, the note for port pressure and action time will be changed from 4/ to 3/.

*** END OF NARRATIVE H0001 ***

10 11

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION J - LIST OF ATTACHMENTS

List of Number List of Number

Addenda Title Date of Pages Transmitted By Addenda Title Date of Pages Transmitted By________________ ____________________________________________________________ _______________ ____________ _______________________________ ____________________________________________________________ _______________ ____________ _______________

Exhibit A FORM 1423-1 CONTRACT DATA REQUIREMENTS (CDRLS A001 - A023) 23-JAN-2017 023 EMAIL

Attachment 0011 DRAWING 408JXN00095B 001 EMAIL

Attachment 0012 DRAWING 408JXN00096B 001 EMAIL

Attachment 0013 DRAWING 408JXN00753 002 EMAIL

11 11