Attachment_0012_-Drawing_408JXN00096B.pdf

D

C

B

A

D

C

B

A

1345678

12345678

CAD MAINTAINED. CHANGES

SHALL BE INCORPORATED BY

THE DESIGN ACTIVITY

TABLE

LINE

NO. PART NO.

CARTON, POINT PROTECTOR,

5.56MM, 30 ROUND

PART NO.

COLUMN B

QTY.

COLUMN C

NOMENCLATURE

COLUMN D

GENERAL MARKING

COLUMN E

NATIONAL STOCK

NUMBER AND DODIC

1 12255-408JXN00096-1 12255-408JXN00095-1 870 RRLP MK255 MOD 0 1305-01-422-8733 AA17 2 12255-408JXN00096-2 12255-408JXN00095-2 870 RRLP MK255 MOD 1 1305-01-597-9747 AA17 3 12255-408JXN00096-3 12255-408JXN00095-3 840 FRANGIBLE MK311 MOD 0 1305-01-492-8545 AA40 4 12255-408JXN00096-4 12255-408JXN00095-4 840 FRANGIBLE MK311 MOD 0 1305-01-644-3649 AA40 5 12255-408JXN00096-5 12255-408JXN00095-5 840 FRANGIBLE MK311 MOD 2 1305-01-600-0670 AA40

REVISION HISTORY

ZONE LTR DESCRIPTION DATE APPROVED

DISTRIBUTION STATEMENT A:

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED

PARTS LIST

NOTES OR REMARKSSPECIFICATION NOMENCLATURE OR DESCRIPTIONPART OR

DRAWING NO.

CAGE

CODE

QTY

REQD

FIND

NO.

CARTON, 30 CARTRIDGES, 5.56MM 408JXN0009512255 AR 1

BOX, AMMUNITION, M2A1 ASSEMBLY75532961920012

FILLER, BOTTOM, 5.38 X 10.75 IN408JXN00096-0112255AR3

FILLER, TOP, 5.38 X 10.75 IN 408JXN00096-02 12255AR4

FILLER, END, 5.00 X 6.75 IN408JXN00096-0312255AR5

FILLER, SIDE, 10.75 X 6.50 IN408JXN00096-04 12255 AR6

FILLER, CORNER, 9.75 X 2.25 IN408JXN00096-0512255AR7

A-A-52071TAPE, REMOVAL, 1.00 X 12.00408JXN00096-0612255AR8

SEAL, METALLIC87943421920319

A-A-208INK, STENCILAR10

BOX, AMMUNITION, M2A2 ASSEMBLY1303254219200 1 11

INK, STENCIL921178819203AR12

PREPARED BY:

NAVSURFWARCENDIV CRANE

CODE: JXN CAGE: 12255

SIGNATURE DATE

PREPARED ALEX TOON 8/24/16

CHECKED TIM REAM 8/24/16

DESIGNED

TASK MGR SUNG KIM 8/24/16

BR MGR MIKE HUFFMAN 8/24/16

APVD DATE OF

MIKE HUFFMAN RELEASE

8/24/16 1OF1SHEETWEIGHTSCALE

B408JXN0009612255D

REVNAVSEA DWG NO.ESWBSCAGE CODESIZE

5.56MM

M2A1 OR M2A2 AMMO BOX,

PACKING AND MARKING FOR

NAVAL SEA SYSTEMS COMMAND

DEPARTMENT OF NAVY WASHINGTON D.C. 20362-5105

CONTRACT NO.

INTERPRET DRAWING IN

ACCORDANCE WITH STANDARDS

PRESCRIBED IN ASME Y14.100

AND MIL-STD-31000

DO NOT SCALE THIS DRAWING

BREAK EDGES

.XXX

.XX

DECIMALSANGLES

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ARE:

APPLICATION

USED ONNEXT ASSYASSY

408JXN00097

NOTES:

1. MATERIAL: FIBERBOARD, TYPE CF, DW, GRADE 275, IN

ACCORDANCE WITH ASTM D4727 (FIND NO. 6).

2. MATERIAL: FIBERBOARD, TYPE CF, SW, GRADE 275, IN

ACCORDANCE WITH ASTM D4727 (FIND NO. 3, 4, 5, AND 7).

3. MATERIAL: TAPE, TEXTILE, COTTON, SPEC A-A-52071 (FIND NO. 8).

4. MATERIAL: INK, STENCIL, YELLOW NO. 33538, OR WHITE

NO. 37875, TYPE I OR III, (FIND NO. 10) SPEC A-A-208, SEE NOTE 5.

5. ALTERNATIVE MATERIAL: INK IN ACCORDANCE WITH DRAWING

19203-9211788 (FIND NO. 12).

6. CARTON (POINT PROTECTOR) SHALL BE FILLED WITH THE

APPROPRIATE CARTRIDGE PER THE NATIONAL STOCK NUMBER.

7. ALTERNATIVE CONTAINER: BOX, AMMUNITION, M2A2 IN

ACCORDANCE WITH DRAWING 19200-13032542 (FIND NO. 11).

P1 - ALL PACKING MATERIAL MUST BE THOROUGHLY DRIED TO 9% MAXIMUM MOISTURE

CONTENT AT THE TIME OF PACKAGING.

P2 - PACK TWENTY EIGHT (28) OR TWENTY NINE (29) FILLED CARTONS, 5.56MM (FIND NO. 1) , INTO BOX, AMMUNITION, M2A1 (FIND NO. 2) OR M2A2 (FIND NO. 11).

P3 - PLACE BOTTOM FILLER (FIND NO. 3) IN THE BOTTOM OF M2A1 (FIND NO. 2) OR M2A2

(FIND NO. 11).

P4 - ON BOTTOM ROW INSERT EIGHTEEN (18) CARTONS (FIND NO. 1) STANDING ON CLOSED END.

P5 - ON TOP ROW INSERT NINE (9) CARTONS WITH REMOVAL TAPE (FIND NO. 8) AROUND MIDDLE CARTON, AS SHOWN.

P6 - ON TOP ROW FOR PACKING TWENTY EIGHT (28) CARTONS, ON SIDE OF BOX, INSERT ONE (1) CARTON, AFTER WHICH, INSERT TWO (2) CORNER FILLERS (FIND NO. 7) AT EACH END AS SHOWN.

P7 - ON TOP ROW FOR PACKING TWENTY NINE (29) CARTONS, ON SIDE OF BOX, INSERT TWO (2)

CARTONS, AFTER WHICH, INSERT ONE (1) CORNER FILLER, (FIND NO. 7) AS SHOWN.

P9 - ADD FILLERS (FIND NO. 4, 5, AND 6) AS REQUIRED FOR A TIGHT PACK.

P10 - CLOSE BOX AND MARK AS SHOWN IN MARKING DIAGRAM. APPLY METALLIC SEAL (FIND NO. 9)

IN ACCORDANCE WITH DRAWING 19200-12977298.

PACKING INSTRUCTIONS

M1 - MARKING SHALL BE APPLIED ON SIDE OF CONTAINER, IN ACCORDANCE WITH NOTE 4.

SIZE OF LETTERS SHALL BE 1/2 INCH HIGH WITH A MINIMUM OF 3/32 INCH BETWEEN

LINES. THE SIZES AND SPACES OF LETTER BLOCKS ARE REPRESENTATIVE OF STANDARD

STENCIL MACHINE LETTERING.

M2 - LOT NUMBER PER MIL-STD-1168. THE WORD LOT SHALL PRECEDE THE LOT NUMBER.

MARKING INSTRUCTIONS

CUTAWAY VIEW SHOWING

29 CARTON ARRANGEMENT

CUTAWAY VIEW SHOWING

28 CARTON ARRANGEMENT

COL B

COL C

COL D

COL E

M2