Attachment_0013_-_Drawing_408JXN00753.pdf

D

C

B

A

D

C

B

A

1345678

12345678

DRAWING FILE NAME

WIREBOUND

ASSEM

M2_A1_40CAL_MARKED_CAN

TYPE:SOURCE FILE NAME:

CAD MAINTAINED. CHANGES

SHALL BE INCORPORATED BY

THE DESIGN ACTIVITY

ESTIMATED WEIGHT

ITEM

NO.

DESCRIPTION WEIGHT

(LBS)

1 BOX, WIREBOUND 5.5

2 SEPARATOR (2) OR

ALTERNATES

0.2

3 BOX, AMMUNITION,

M2A1 OR M2A2, EMPTY (2)

11.0

4 MISCELLANEOUS PACKING

MATERIALS

1.3

5 TOTAL

(PACKING MATERIALS)

18.0

DISTRIBUTION STATEMENT A;

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED

REVISION HISTORY

ZONELTR DESCRIPTION DATE APPROVED

PREPARED BY:

NAVSURFWARCENDIV CRANE

CODE: JXN CAGE: 12255

SIGNATURE DATE

PREPARED ALEX TOON 09/08/16

CHECKED SUNG KIM 09/08/16

DESIGNED

TASK MGR TIM REAM 09/08/16

BR MGR MIKE HUFFMAN 09/08/16

APVD DATE OF

MIKE HUFFMAN RELEASE

09/08/16 2OF1SHEETWEIGHTSCALE

-408JXN00753 12255D

REVNAVSEA DWG NO.ESWBSCAGE CODESIZE

CARTRIDGES, VARIOUS

BOX, WIREBOUND,

PACK AND MARK

NAVAL SEA SYSTEMS COMMAND

DEPARTMENT OF NAVY WASHINGTON D.C. 20362-5105

CONTRACT NO.

INTERPRET DRAWING IN

ACCORDANCE WITH STANDARDS

PRESCRIBED IN ASME Y14.100

AND MIL-STD-31000

DO NOT SCALE THIS DRAWING

BREAK EDGES

.XXX

.XX

DECIMALSANGLES

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ARE:

PARTS LIST

NOTES OR

REMARKS SPECIFICATION NOMENCLATURE OR DESCRIPTIONPART OR IDENTIFYING NO. CAGE CODEQTY. REQD FIND NO.

PACKED AND MARKED

AMMUNITION CANSEE COLUMN BSEE COLUMN B21

WIREBOUND BOX

AND FILLERS755334719200AR2

A-A-208INK, STENCILAR3

SEAL, METALLIC87943421920314

EXPLOSIVE LABELSEC 172.411,49 CFR15

INK, MARKING, OPAQUE921178919203AR6

INK 9396193 19200AR7

REPLINISHER, INK 9396194 19200AR8

APPLICATION

USED ONNEXT HIGHER

ASSEMBLY(S)

N/AN/A

PACKAGING INSTRUCTIONS

P1 - ALL PACKING MATERIAL MUST BE THOROUGHLY DRY AT TIME OF PACKING.

P2 - PACK TWO M2A1 OR M2A2 BOXES (FIND NO. 1), SEE COLUMN B, INTO WIREBOUND BOX

(FIND NO. 2) AS SHOWN.

P3 - PLACE FILLERS (FIND NO. 2) IN ACCORDANCE WITH DRAWING 19200-7553347 TO OBTAIN

A TIGHT PACK.

P4 - CLOSE WIREBOUND BOX AND LOOPS AS SHOWN IN FIG. 9 OF SPECIFICATION PPP-B-585.

P5 - APPLY METALLIC SEAL (FIND NO. 4) TO WIREBOUND BOX AS SHOWN ON DWG. 19200-8594163.

SEAL SHALL BE LOCATED ON THIRD WIRE FROM LEFT.

P6 - SECURE EXPLOSIVE LABEL (FIND NO. 5) ON TOP OF BOX BELOW DETAIL D. LABEL SHALL

DISPLAY THE U.N. HAZARD DIVISION 1.4 AND COMPATIBILITY GROUP S.

MARKING INSTRUCTIONS

M1 - MARKING TO BE STENCILED OR STAMPED ON TOP, ENDS, AND SIDES OF

WIREBOUND (FIND NO. 2) EXCEPT FOR BAR CODING, SEE M7.

M2 - LETTERS AND FIGURES SHALL BE MARKED WITH BLACK STENCIL INK, SEE

NOTE 1.

M3 - THE SIZES AND SPACES OF LETTER BLOCKS ARE REPRESENTATIVE OF

STANDARD STENCIL MACHINE LETTERING.

M4 - ALL LETTERS AND NUMBERS SHALL BE A MINIMUM 1/2 INCH HIGH.

M5 - THERE SHALL BE AT LEAST 1/2 INCH SPACING BETWEEN LINES.

M6 - THE RELATIVE POSITIONS OF THE VARIOUS MARKINGS SHALL BE AS SHOWN.

MARKING SHALL BE PLACED TO AVOID INTERFERENCE WITH WIRES.

M7 - SEE DRAWING 19200-12982865 FOR BAR CODE LABEL REQUIREMENTS AND

INFORMATION TO BE ENCODED. LABEL TO BE LOCATED ON SIDE OF BOX,

LOWER RIGHT CORNER.

M8 - INSERT AMMUNITION LOT NUMBER IN ACCORDANCE WITH MIL-STD-1168.

THE WORD "LOT" SHALL NOT BE USED AND THE LOT NUMBER SHALL

NOT BE UNDERLINED.

M9 - ALL NON-MANUFACTURED WOOD USED IN PACKAGING SHALL BE HEAT

TREATED, CERTIFIED, AND MARKED IN ACCORDANCE WITH MIL-B-46506.

THE QUALITY MARK SHALL NOT INTERFERE WITH NOR OVERLAP OTHER

MARKINGS ON THE CONTAINER.

M10 - AVERAGE GROSS WEIGHT, TO NEAREST POUND, SHALL BE DETERMINED BY

WEIGHING REPRESENTATIVE SAMPLES. IF AVERAGE GROSS WEIGHT IS

NOT AVAILABLE, USE ESTIMATE.

M11 - INSERT AMMUNITION LOT NUMBER IN ACCORDANCE WITH MIL-STD-1168. THE

WORD 'LOT' AND THE LOT NUMBER SHALL BE UNDERLINED WITH A SOLID

BLACK LINE, 1/8 INCH THICK MINIMUM.

M12 - USE CODE NUMBER "4C1" IF THE BOX IS MADE FROM ORDINARY NATURAL WOOD.

USE CODE NUMBER "4D" IF THE BOX IS MADE FROM PLYWOOD

(AT LEAST 3-PLY).

M13 - LAST TWO DIGITS OF YEAR OF MANUFACTURE. LAST TWO DIGITS OF YEAR

OF PACK WILL BE USED WHEN MONTH AND YEAR OF MANUFACTURE ARE

UNKNOWN.

M14 - PLACE POP MARKING ON SIDE OF BOX OPPOSITE CARTRIDGE IDENTIFICATION

MARKING SHOWN IN DETAIL B.

M15 - USE OF ELECTROSTATIC TYPE INK JET PRINTING EQUIPMENT IS AUTHORIZED

AS ALTERNATIVE MARKING SYSTEM IF APPROVED INK AND INK REPLENISHER

(SEE NOTE 3) ARE USED.

DETAIL B

MARKING ON SIDE OF BOX

NOTES:

1. MATERIAL: INK, STENCIL (FIND NO. 3), COLOR: BLACK NO. 37038, TYPE II, III, OR IV, SPEC A-A-208.

SEE NOTE 2.

2. ALTERNATIVE MATERIAL: INK IN ACCORDANCE WITH DRAWING 19203-9211789 (FIND NO. 6).

3 . MATERIAL: INK AND INK REPLENISHER IN ACCORDANCE WITH DRAWING 19200-9396193 (FIND NO. 7)

AND DRAWING 19200-9396194 (FIND NO. 8).

4. MATERIAL: FILLERS, IN ACCORDANCE WITH DRAWING19200-7553347 (FIND NO. 2).

CARTRIDGES, SMALL ARMS

UN0012 1.4S

DETAIL D

MARKING ON TOP OF BOX

DETAIL C

MARKING ON SIDE OF BOX

SEE M14

DETAIL A

MARKING ON END OF BOX (BOTH ENDS)

SEE M9

2X

M12 M13

COL D

COL C

M8

COL G

COL G

M11

COL F

COL C

COL D

COL E

M10

M7

FOR MARKING ON SIDE OF BOX

SEE DETAIL B

FOR 'POP' MARKING ON OPPOSITE

SIDE OF BOX SEE DETAIL C

FOR MARKING ON END OF BOX

SEE DETAIL A

FOR MARKING ON TOP OF BOX

SEE DETAIL D

D

C

B

A

D

C

B

A

1345678

12345678

DRAWING FILE NAME

WIREBOUND

ASSEM

M2_A1_40CAL_MARKED_CAN

TYPE:SOURCE FILE NAME:

CAD MAINTAINED. CHANGES

SHALL BE INCORPORATED BY

THE DESIGN ACTIVITY

TABLE

LINE

NO.

(COLUMN A)

PART NO.

(COLUMN B)

BOX, AMMO

M2A1 OR M2A2,

PACKED

(COLUMN C)

NUMBER OF

CARTRIDGES

(COLUMN D)

CARTRIDGE

NOMENCLATURE

(COLUMN E)

GENERAL

MARKING

(COLUMN F)

NATIONAL STOCK NUMBER

(COLUMN G)

DODIC

(COLUMN H)

REF. DATA

CARTRIDGE

PART NO.

1 12255-408JXN00753-1 12255-408JXN00006-6 1300 .40 S&W BALL MK 309 MOD 0 1305-01-550-0179 DWGX 2 12255-408JXN00753-2 12255-408JXN00006-7 1300 .40 S&W JHP MK 308 MOD 0 1305-01-548-6279 DWGW 3 12255-408JXN00753-3 12255-408JXN00006-8 1300 .40 S&W FRANGIBLE MK 326 MOD 0 1305-01-600-0286 CWRD 4 12255-408JXN00753-4 12255-408JXN00003-4 1320 5.56MM SPECIAL BALL, LONG RANGE MK 262 MOD 0 1305-01-497-9996 AA53 53711-7379740 5 12255-408JXN00753-5 12255-408JXN00003-5 1320 5.56MM SPECIAL BALL, LONG RANGE MK 262 MOD 1 1305-01-507-7511 AA53 53711-7546870 6 12255-408JXN00753-6 12255-408JXN00003-6 1320 5.56MM BALL, CARBINE, BARRIER MK 318 MOD 0 1305-01-573-2229 AB49 53711-8347645 7 12255-408JXN00753-7 53711-8330255-1 920 7.62MM SPECIAL BALL, LONG RANGE MK 316 MOD 0 1305-01-567-6944 AB39 53711-8330253

8 12255-408JXN00753-8 - 2000 .45 CAL JHP MK 247 MOD 0 1305-01-442-1186 AA14

9 12255-408JXN00753-9 53711-8330255-7 920 7.62MM BALL, RIFLE, BARRIER MK 319 MOD 0 1305-01-572-8492 AB50 53711-8347647

10 12255-408JXN00753-10 12255-408JXN00096-1 1740 5.56MM RRLP MK 255 MOD 0 1305-01-442-8733 AA17 N/A 11 12255-408JXN00753-11 12255-408JXN00096-2 1740 5.56MM RRLP MK 255 MOD 1 1305-01-597-9747 AA17 12255-408JXN00025

12 12255-408JXN00753-12 12255-408JXN00096-3 1680 5.56MM FRANGIBLE MK 311 MOD 0 1305-01-492-8545 AA40 N/A 13 12255-408JXN00753-13 12255-408JXN00096-4 1680 5.56MM FRANGIBLE MK 311 MOD 2 1305-01-600-0670 AA40 FEDERAL DRAWING B62046

14 12255-408JXN00753-14 12255-408JXN00096-5 1680 5.56MM FRANGIBLE MK 311 MOD 0 1305-01-644-3649 AA40 WINCHESTER DRAWING WI1151

15 12255-408JXN00753-15 - 2000 9MM FRANGIBLE MK 254 MOD 0 1305-01-442-8717 AA16 N/A 16 12255-408JXN00753-16 12255-408JXN00002 1640 5.56MM, BALL, CARBINE, BARRIER MK 318 MOD 1 1305-01-656-5117 AC12 12255-408JXN00746 17 12255-408JXN00753-17 12255-408JXN00750 1920 4.6MM, CARTRIDGE, BALL - 1305-01-656-1304 AC11 12255-408JXN00749

REVISION HISTORY

ZONELTR DESCRIPTION DATE APPROVED

CONTRACT NO.

INTERPRET DRAWING IN

ACCORDANCE WITH STANDARDS

PRESCRIBED IN ASME Y14.100

AND MIL-STD-31000

DO NOT SCALE THIS DRAWING

BREAK EDGES

.XXX

.XX

DECIMALSANGLES

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ARE:

DISTRIBUTION STATEMENT A;

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED APPLICATION

USED ONNEXT HIGHER

ASSEMBLY(S)

N/AN/A

PREPARED BY:

NAVSURFWARCENDIV CRANE

CODE: JXN CAGE: 12255

SIGNATURE DATE

PREPARED ALEX TOON 09/08/16

CHECKED SUNG KIM 09/08/16

DESIGNED

TASK MGR TIM REAM 09/08/16

BR MGR MIKE HUFFMAN 09/08/16

APVD DATE OF

MIKE HUFFMAN RELEASE

09/08/16 2OF2SHEETWEIGHTSCALE

-408JXN00753 12255D

REVNAVSEA DWG NO.ESWBSCAGE CODESIZE

CARTRIDGES, VARIOUS

BOX, WIREBOUND,

PACK AND MARK

NAVAL SEA SYSTEMS COMMAND

DEPARTMENT OF NAVY WASHINGTON D.C. 20362-5105

Sheet 2