Updated_SOW_HFP-2026-134637.pdf
PDF 94 KB Posted
- Attached to
- Walk-In Laboratory Cooler Federal contract opportunity
- Solicitation number
- 75F40126Q00386
About this file
This is a Statement of Work (SOW) for the acquisition of one walk-in cooler by the Food and Drug Administration (FDA) to support the FDA Moffett Center located in Bedford Park, Illinois.
The walk-in cooler is required to support storage of food matrices used in proficiency testing and method validation activities, replacing an existing non-operational unit that has failed due to age. The cooler must provide interior dimensions of approximately 105 inches (length) × 80 inches (width) × 105 inches (height) with substantially equivalent usable space. Technical requirements include maintaining an operating temperature of 2°C ± 0.5°C with redundant cooling systems and automatic switchover capability; stainless steel interior walls, ceiling, floor, shelving, and work surfaces suitable for laboratory disinfectant cleaning; a ramp suitable for laboratory carts; non-slip flooring; bright LED interior lighting; four GFCI-protected electrical outlets inside the unit; and interior emergency door release with emergency alarm or equivalent safety feature. The contractor must deliver the walk-in cooler to the FDA Moffett Center during normal business hours (Monday-Friday, 8:00 a.m. to 4:00 p.m., excluding Federal holidays) within the contractor's standard commercial delivery timeline following award. The contractor shall provide the manufacturer's standard commercial warranty documentation at delivery, identifying coverage and duration for parts, labor, compressor, and insulated panels. Installation and site preparation are excluded from this requirement. The Government will inspect the equipment upon delivery to verify correct components, absence of shipping damage, and conformance to contract requirements. The Contracting Officer is Iris Johnson (Iris.Johnson1@fda.hhs.gov, 301-796-3353), and a Contracting Officer's Representative will be identified at award.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment A00003 SF30_Questions and Answers_HFP-2026-134637.pdf | ||
| A00003_Updated_SOW_HFP-2026-134637.pdf | ||
| A00002_Solicitation_HFP-2026-134637.pdf | ||
| A00002_Updated_SOW_HFP-2026-134637.pdf | ||
| Amendment A00002 SF30_Questions and Answers_HFP-2026-134637.pdf | ||
| A00001_HFP-2026-134637.pdf | ||
| Solicitation_HFP-2026-134637.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ALP: HFP-2026-134637 | Walk-In Cooler 1
HFP-2026-134637 | 1
STATEMENT OF WORK (SOW)
Walk-In Cooler
1. Purpose The purpose of this requirement is to acquire one (1) walk-in cooler to support storage of food matrices used in proficiency testing and method validation activities at the FDA Moffett Center.
2. Background The FDA Food Safety Modernization Act (FSMA) requires laboratory testing to meet established quality standards, which are supported through proficiency testing programs. The laboratory currently relies on a walk-in cooler to store food matrices used in proficiency testing and method validation activities. The existing unit is no longer operational due to age and equipment failure. Replacement of the walk-in cooler is required to restore storage capability and support ongoing laboratory operations.
3. Scope The Contractor shall furnish and deliver one (1) walk-in cooler that meets the minimum requirements identified in this Statement of Work.
Installation and site preparation are not included in this requirement. The Quoter shall identify any manufacturer installation, startup, inspection, or certification requirements necessary to activate or maintain the manufacturer's warranty.
4. Minimum Technical Requirements
4.1 Interior Dimensions
The walk-in cooler shall provide interior dimensions of approximately 105 inches (L) × 80 inches (W) × 105 inches (H). The Quoter shall clearly identify the proposed interior dimensions in its quotation. Proposed dimensions shall provide substantially equivalent usable space and shall not materially reduce the Government's available floor or storage space.
4.2 Temperature and Refrigeration
• Maintain an operating temperature of 2°C ± 0.5°C.
• Include redundant cooling systems with automatic switchover, or equivalent automatic redundancy capability, to minimize the risk of refrigeration failure.
4.3 Construction and Laboratory Use
• Stainless steel interior walls, ceiling, and floor suitable for routine cleaning with laboratory disinfectants.
• Stainless steel shelving and benches/work surfaces.
• Ramp suitable for laboratory carts.
• Non-slip floor surface.
• Bright LED interior lighting.
4.4 Interior Electrical Outlets
• Four (4) GFCI-protected electrical outlets inside the walk-in cooler.
ALP: HFP-2026-134637 | Walk-In Cooler 2
HFP-2026-134637 | 2
The Quoter shall clearly identify the proposed interior outlet configuration in its quotation. The outlets are required for the Government's laboratory operations and shall be included as part of the proposed cooler configuration.
4.5 Safety Features
• Interior emergency door release.
• Emergency alarm or equivalent safety feature.
5. Warranty The Contractor shall provide the manufacturer's standard commercial warranty applicable to the proposed walk-in cooler and refrigeration system. The Quoter shall identify the warranty coverage and duration applicable to the equipment, including parts, labor, compressor, and insulated panels, as applicable.
No preventive maintenance or repair services beyond those provided under the manufacturer's warranty are required under this acquisition.
The Quoter shall identify any manufacturer installation, startup, inspection, or certification requirements necessary to activate or maintain the manufacturer's warranty. Any warranty repairs shall be performed in accordance with the manufacturer's warranty terms and requirements.
6. Delivery The Contractor shall deliver the walk-in cooler to:
FDA Moffett Center 6502 South Archer Road Bedford Park, IL 60501
Delivery shall occur during normal business hours, Monday through Friday, 8:00 a.m. to 4:00 p.m., excluding Federal holidays. Delivery shall be coordinated with the Government-designated receiving representative identified after award.
The Quoter shall identify its proposed delivery lead time. Delivery shall occur within the Contractor's standard commercial timeline following award.
Installation and site preparation are not included in this requirement.
7. Inspection and Acceptance The Government will inspect the walk-in cooler upon delivery to verify that the correct equipment and required components were delivered, the equipment is free from visible shipping damage, and the equipment conforms to the contract requirements. Government acceptance will occur following satisfactory inspection of the delivered equipment.
8. Deliverables The Contractor shall provide the following:
Deliverable Quantity Due
Walk-In Cooler 1 Within the Contractor's standard commercial delivery timeline following award
ALP: HFP-2026-134637 | Walk-In Cooler 3
HFP-2026-134637 | 3
Deliverable Quantity Due Manufacturer Warranty Documentation 1 At delivery
9. Government Points of Contact Contracting Officer (CO):
Iris Johnson Iris.Johnson1@fda.hhs.gov
(301) 796-3353
Contracting Officer's Representative (COR):
The COR will be identified at the time of award.
| 1. Purpose |
| 2. Background |
| 3. Scope |
| 4. Minimum Technical Requirements |
| 4.1 Interior Dimensions |
| 4.2 Temperature and Refrigeration |
| 4.3 Construction and Laboratory Use |
| 4.4 Interior Electrical Outlets |
| 4.5 Safety Features |
| 5. Warranty |
| 6. Delivery |
| 7. Inspection and Acceptance |
| 8. Deliverables |
| 9. Government Points of Contact |
File details come from the government source that posted it. Updated .