Technical_Specifications.pdf

TECHNICAL

SPECIFICATIONS

LED Streetlight Retrofits at Various Locations

Bid No. 22/23-027

Town of Manchester, CT

NOTICE TO CONTRACTOR - GENERAL

NOTICE TO CONTRACTOR - GENERAL

Limitation of Operations

Work hours shall be defined as 7:00 a.m. to 7:00 p.m. Mondays through Fridays. No work shall take place outside those hours without prior permission from the Engineer.

Safety

Implementing worker safety and health protocols that address compliance with all rules, laws and regulations regarding safety and risk of exposure to physical and chemical hazards is the sole responsibility of the Contractor. All employees of the contractor and subcontractors are to wear reflective vests and hard hats at all times when on the project site.

Temporary Storage Areas

The Contractor is responsible for identifying material storage areas for the project that provide safe access and egress for construction vehicles accessing public roads, and for providing appropriate erosion controls and restoration as directed by the Engineer. The Contractor shall not store construction equipment or materials within the public right-of-way.

Disposal of Surplus Material

Surplus materials are the responsibility of the Contractor and shall be properly disposed of in accordance with all local, state and federal regulations.

Permits

The Contractor must obtain a “Right of Way” permit from the Town’s Engineering Division for this project. This permit fee will be waived.

Pre-Construction Meeting

The contractor’s foreman, subcontractors and other responsible personnel that will be directly involved in construction shall attend a pre-construction meeting for this project that will be scheduled by the Town.

Indeterminate Quantities

Certain items in the bid (identified with a “*”) are indeterminate quantities; i.e. the quantity cannot be estimated and is based on conditions encountered during construction. For these items, the quantity shown in the bid is for bidding purposes only. No adjustment in unit prices will be made based on final quantities.

TS-1

LUMINAIRES

TECHNICAL SPECIFICATIONS

LUMINAIRES

DESCRIPTION

“Replace Cobrahead Luminaire” of the wattage specified includes the furnishing and installation of new LED cobrahead style luminaires mounted on existing mast arms. This item consists of a complete installation, including wiring, mounting, testing and other incidental work as specified.

It also includes the removal and disposal of existing luminaires.

“New Cobrahead Luminaire” of the wattage specified includes the furnishing and installation of new LED cobrahead style luminaires and new mast arms mounted on existing wood utility poles.

This item consists of a complete installation, including wiring, mounting, testing and other incidental work as specified.

“Replace Area Light” includes the furnishing and installation of new LED area light mounted on existing steel poles. This item consists of a complete installation, including wiring, mounting, testing and other incidental work as specified. It also includes the removal and disposal of existing area lights.

“Replace Area Light and Pole (Single)” includes the furnishing and installation of one new LED area light and one new steel pole mounted on existing foundations. This item consists of a complete installation, including wiring, mounting, testing and other incidental work as specified.

It also includes the removal and disposal of existing area lights and poles.

“Replace Area Light and Pole (Double)” includes the furnishing and installation of two new

LED area lights and one new steel pole mounted on existing foundations. This item consists of a complete installation, including wiring, mounting, testing and other incidental work as specified. It also includes the removal and disposal of existing area lights and poles.

“Replace Mast Arm” includes the removal and disposal of existing aluminum or steel mast arms and the furnishing and installation of new aluminum mast arms mounted on existing wood utility poles.

SUBMITTALS

The Contractor shall submit one electronic copy (pdf) of the shop drawings associated with the proposed luminaires, area lights, poles and mast arms.

LICENSING

The Contractor shall be properly trained, certified, licensed and insured to perform installation, removal, replacement, relocation, transfer, and maintenance work on street lighting equipment in close proximity to high voltage electrical conductors (the “Work”). The Contractor is required to perform the Work on behalf of the Town of Manchester in accordance with all applicable federal, state, and local laws, regulations, safety codes and ordinances. The Contractor further certifies that all individuals performing Work on street lighting equipment have received full and adequate safety training. The Contractor acknowledges that this certification is proof of the qualifications of such Contractor. The Contractor shall indemnify and hold harmless the Town of

Manchester and all other owners of poles to which street lighting equipment is or may be

TS-2

LUMINAIRES

attached from and against all claims, costs, liabilities, losses, judgments and expenses, including reasonable attorneys' fees, that may arise to, or be suffered by, any of them as a result of the

Contractor’s control of the street lighting equipment or occasioned wholly or in part by any act or omission of the Contractor in the performance of Work or any other activities of such persons involving such street lighting equipment or the Eversource’s distribution facilities.

MATERIALS

Cobrahead luminaires shall be Philips Road Focus Series as manufactured by:

Philips Lighting North America Corporation

200 Franklin Square Drive

Somerset, NJ 08873

(800) 668-9008 www.lightingproducts.philips.com or Cree Traveyo Series as manufactured by:

Cree Lighting

4600 Silicon Drive

Durham, North Carolina, 27703

(800) 533-2583 www.cree.com

Products from other manufacturers will not be accepted. All cobrahead luminaires furnished under this contract shall be from ONE of these manufacturers (i.e. the Contractor may not mix and match Philips and Cree products for this project).

40 Watt cobrahead luminaires shall be:

PHILIPS: Model RFS-45W16LED3K-G2-R2M-UNV-DMG-HS-PH8-GY3

CREE: Model TRVSM-A-HT-2ME-5L-30K7-UL-GY-N

70 Watt cobrahead luminaires shall be:

PHILIPS: Model RFM-75W60LED3K-G2-R2M-UNV-DMG- HS-PH8-GY3

CREE: TRVMD-A-HT-2ME-10L-30K7-UL-GY-N

130 Watt cobrahead luminaires shall be:

PHILIPS: Model RFL-135W80LED4K-G2- R2M-UNV-DMG-PHXL-GY3

CREE: TRVLG-A-HT-2ME-16L-40K7-UL-GY-N

All cobrahead luminaires shall include a twist-lock photoelectrical cell.

TS-3

Area lights shall be Model ALED 4T260/480/D10 as manufactured by:

RAB Lighting Inc.

408 W 14th St.

New York, NY 10014

(888) 722-1000 www.rabweb.com

Steel poles shall be Model DS330-D2-FPGV-DB-FBC-LAB-PC as manufactured by:

Valmont Industries Inc.

28800 Ida Street

P.O. Box 358

Valley, NE 68064 www.valmontstructures.com

Poles shall be custom fabricated for a 14.25” bolt circle.

Aluminum mast arms shall be Model AMAWT-T20-US8-SA as manufactured by:

Lithonia Lighting

P.O. Box A

Conyers, GA www.lithonia.com or approved equal.

CONSTRUCTION DETAILS

For replace items, existing luminaires, area lights, poles and accessories shall be removed and become the property of the Contractor.

New luminaires and area lights shall be securely mounted on mast arms or poles in accordance with manufacturer’s installation instructions.

New poles shall be securely mounted on existing concrete foundations and shall be true and plumb.

The Contractor shall wire new luminaires and area lights to the existing streetlight wiring.

When, in the Engineer’s opinion, the existing mast arm is damaged or otherwise not sufficient to accept the new luminaire, the Contractor shall remove the existing mast arm and replace with a new mast arm.

TS-4

LUMINAIRES

WARRANTY

In addition to the warranty provided by the lighting manufacturer, the Contractor shall provide a one year warranty on the installation.

MEASUREMENT AND PAYMENT

“Replace Cobrahead Luminaire” of the wattage specified will be measured for payment by the actual number of cobrahead luminaires of the wattage specified, furnished, installed and accepted. This work will be paid for at the contract unit price each for “Replace Cobrahead

Luminaire” of the wattage specified, complete in place, which price shall include all materials, tools, equipment and labor incidental thereto. It shall also include the removal and satisfactory disposal of existing cobrahead luminaires.

“New Cobrahead Luminaire” of the wattage specified will be measured for payment by the actual number of cobrahead luminaires of the wattage specified, furnished, installed and accepted. This work will be paid for at the contract unit price each for “New Cobrahead

Luminaire” of the wattage specified, complete in place, which price shall include all materials, tools, equipment and labor incidental thereto. It shall also include furnishing and mounting of new mast arms on existing wood utility poles.

“Replace Area Light” will be measured for payment by the actual number of area lights installed and accepted. This work will be paid for at the contract unit price each for “Replace Area

Light”, complete in place, which price shall include all materials, tools, equipment and labor incidental thereto. It shall also include the removal and satisfactory disposal of existing area lights.

“Replace Area Light with Pole” of the type specified will be measured for payment by the actual number of poles installed and accepted. This work will be paid for at the contract unit price each for “Replace Area Light with Pole” of the type specified, complete in place, which price shall include all materials, tools, equipment and labor incidental thereto. It shall also include the removal and satisfactory disposal of existing area lights and poles.

“Replace Mast Arm” will be measured for payment by the actual number of mast arms furnished, installed and accepted. This work will be paid for at the contract unit price each for “Replace

Mast Arm”, complete in place, which price shall constitute full compensation for all materials, tools, equipment and labor incidental thereto.

TS-5

RoadFocus-RFS-Spec 10/21 page 1 of 5

Lumec RoadFocus LED cobra head luminaires feature a sleek design that provides seamless replacement of existing HID luminaires. RoadFocus is available in three sizes, offers multiple lumen packages, and a complete array of optical distributions, making it an outstanding solution for all types of roadway applications. Includes Service Tag, innovative way to provide assistance throughout the life of the product.

Ordering guide example: RFS-35W16LED4K-G2-R2M-UNV-DMG-HS-PH8-RCD7-GY3

Series

RFS

LED

module CCT Generation

G2 Distribution Voltage

Options

FinishControls 4 Options

RFS

RoadFocus small

15W12LED

20W12LED

25W12LED

25W16LED

30W16LED

35W16LED

45W16LED

50W16LED

54W16LED

60W16LED7

20W20LED13

40W20LED13

65W20LED13

35W32LED

55W32LED

60W32LED

72W32LED

108W32LED7

35W40LED13

50W40LED13

55W40LED13

65W40LED13

80W40LED13

100W40LED7,13

4K 4000K 3K 3000K 2.7K 11 2700K

G2 Generation 2

Type 2 R2S Type II short

(ASYM)

R2M Type II Medium

(ASYM)

Type 3 R3S Type III short

(ASYM)

R3M Type III Medium

(ASYM)

Type 4 4 Type IV

(ASYM)

Type 5

5 Type V

(SYMM)

UNV

120-277V

HVU

347-480V

D4I 15 Zhaga-D4i certified

DALI 1 Digitally addressable lighting interface

DMG 5 0-10V

SRD 1 Sensor ready driver, standard configuration

SRD1 1 Sensor ready driver, alternate configuration

API Factory installed NEMA label, ANSI C136.15-2015 compliant

FAWS 7 Field adjustable wattage selector

CSS 2,14 Cul-de-Sac Shield FSS 2,14 Front Side Shield HS 2,14 House Side Shield LSS 2,14 Left Side Shield RSS 2,14 Right Side Shield NRC 8 No receptacle NYBC 4-position terminal block OMS 16 Outdoor Multisensor PH8 1, 10 Twist-lock photoelectric cell, UNV

(120-277VAC)

PH8/347 10, 12 Twist-lock photoelectric cell (347VAC) PH8/480 10, 12 Twist-lock photoelectric cell (480VAC) PHXL 1, 10 Twist-lock photoelectric cell, extended life, UNV (120-277VAC) PH9 10 Shorting cap RCD 3, 9 Tool less receptacle for twist-lock photocell or shorting cap, 5-pin (optional)

RCD7 3,5 Tool less receptacle for twist-lock photocell or shorting cap, 7-pin (standard)

SP2 20kV / 10kA Surge protector TLRSR 6 SR receptacle BAC17 Meets the requirements of the

Buy American Act of 1933 (BAA)

BK Black BR Bronze GY3 Gray WH White

Accessories18 (must be ordered as separate line item - quickly and easily installed in the field) Interact City connector node (Contact the factory for additional support when connected lighting or additional services are desired.)

Shielding accessories

1 Not available with HVU.

2 Refer to Accessories section to confirm compatibility of shields with optical distribution.

3 Use of photoelectric cell or shorting cap is required to ensure proper illumination.

4 Select either DALI or DMG or SRD or SRD1 mandatory option.

5 Please note this integrated feature come standard with RoadFocus.

6 Only available with SRD or SRD1

Driver Options.

7 Only available with DMG Driver Options.

8 Not available with PH8, PH8/347, PH8/480, PHXL, PH9, DALI, SRD or SRD1 Driver Options.

9 Not available with SRD Driver Options.

10 Either RCD or RCD7 must be selected for this option.

11 Extended lead-time may apply. Consult factory.

12 Not available with UNV.

13 Only available with R2M or R3M distributions.

14 1 shield provided per LED light engine.

15 TLRSR must be selected with D4I 16 TLRSR and D4I must be selected with OMS

17 Failure to properly select the “BAC” suffix could result in you receiving product that is not BAA com-pliant product with no recourse for an RMA or refund.

This BAC designation hereunder does not address (i) the applicability of, or availability of a waiver under, the Trade Agreements Act, or (ii) the “Buy America” domestic content requirements imposed on states, localities, and other non-federal entities as a condi-tion of receiving funds administered by the Depart-ment of Transportation or other federal agencies.

18 Consult Signify to confirm whether specific accessories are BAA-compliant.

Roadway

RoadFocus

RFS Cobra head (small)

Project:

Location:

Cat.No:

Type:

Lumens: Qty:

Notes:

Description Luminaire

Option Code Accessory Ordering Code Shield vs Distribution Compatibility

12/16 LED version* 20 LED version* R2M R2S R3M R3S 4 5

Cul-de-sac shield CSS ACC-LG66V16LED-CSS ACC-LG66V20LED-CSS Yes Yes Yes Yes Yes Yes

Front side shield FSS ACC-LG66V16LED-FSS ACC-LG66V20LED-FSS Yes Yes Yes Yes No Yes

House side shield HS ACC-LG66V16LED-HS ACC-LG66V20LED-HS Yes Yes Yes Yes Yes No

Left side shield LSS ACC-LG66V16LED-LSS ACC-LG66V20LED-LSS Yes Yes Yes Yes Yes Yes

Right side shield RSS ACC-LG66V16LED-RSS ACC-LG66V20LED-RSS Yes Yes Yes Yes Yes Yes

*Refer to Wattage table to confirm light engine configuration. Example, if configuration is 2x16LED, 2 of the desired shields must be ordered per luminaire.

TS-6

RoadFocus-RFM-Spec 08/22 page 1 of 5

Lumec RoadFocus LED cobra head luminaires feature a sleek design that provides seamless replacement of existing HID luminaires. RoadFocus is available in three sizes, offers multiple lumen packages, and a complete array of optical distributions, making it an outstanding solution for all types of roadway applications. Includes Service Tag, innovative way to provide assistance throughout the life of the product.

1 Not available with HVU.

2 Refer to Accessories section to confirm compatibility of shields with optical distribution 3 Use of photoelectric cell or shorting cap is required to ensure proper illumination.

4 Select either DALI or DMG or SRD or SRD1 mandatory option.

5 Please note this integrated feature come standard with RoadFocus.

6 Only available with SRD or SRD1 Driver Options.

7 Only available with DMG Driver Options

8 Not available with PH8, PH8/347, PH8/480, PHXL, PH9, DALI, SRD or SRD1 Driver Options.

9 Not available with SRD Driver Options.

10 Either RCD or RCD7 must be selected for this option.

11 Extended lead-time may apply.

Consult factory.

12 FAWS table accuracy +/- 15% on these models.

13. Not available with UNV.

14 Only available with R2M or R3M distributions.

15 1 shield provided per LED light engine.

16 TLRSR must be selected with D4I

17 TLRSR and D4I must be selected with OMS 18 Failure to properly select the “BAC” suffix could result in you receiving product that is not BAA compliant product with no recourse for an RMA or refund. This BAC desig-nation hereunder does not address (i) the applicability of, or availability of a waiver under, the Trade Agree-ments Act, or (ii) the “Buy America” domestic content requirements imposed on states, localities, and other non-federal entities as a condition of receiving funds administered by the Department of Transportation or other federal agencies.

19 Consult Signify to confirm whether specific accessories are BAA-compliant.

Ordering guide example: RFM-108W48LED3K-G2-R2M-UNV-DMG-HS-PH8-RCD7-GY3

Series

RFM

LED

module CCT Generation

G2 Distribution Voltage

Options

FinishControls 4 Options

RFM

RoadFocus medium

130W32LED

135W40LED14

55W48LED 12

80W48LED

108W48LED

160W48LED

50W60LED14

75W60LED14

100W60LED14

120W60LED14

150W60LED14

170W60LED14

4K 4000K 3K 3000K 2.7K 11 2700K

G2 Generation 2

Type 2 R2S Type II short

(ASYM)

R2M Type II Medium

(ASYM)

Type 3 R3S Type III short

(ASYM)

R3M Type III Medium

(ASYM)

Type 4 4 Type IV

(ASYM)

Type 5

5 Type V

(SYMM)

UNV 120-277V

HVU 347-480V

D4I 16 Zhaga-D4i certified

DALI 1 Digitally addressable lighting interface

DMG 5 0-10V

SRD 1 Sensor ready driver, standard configuration

SRD1 1 Sensor ready driver, alternate configuration

2C Two clamp with 4 bolts API Factory installed NEMA label, ANSI C136.15-2015 compliant FAWS 7 Field adjustable wattage selector CSS 2,15 Cul-de-Sac Shield FSS 2,15 Front Side Shield HS 2,15 House Side Shield LSS 2,15 Left Side Shield RSS 2,15 Right Side Shield NRC 8 No receptacle NYBC 4-position terminal block OMS 17 Outdoor Multisensor PH8 1, 10 Twist-lock photoelectric cell, UNV (120-277VAC)

PH8/347 10, 13 Twist-lock photoelectric cell

(347VAC)

PH8/480 10, 13 Twist-lock photoelectric cell

(480VAC)

PHXL 1, 10 Twist-lock photoelectric cell, extended life, UNV

(120-277VAC)

PH9 10 Shorting cap RCD 3, 9 Tool less receptacle for twist-lock photocell or shorting cap, 5-pin (optional)

RCD7 3, 5 Tool less receptacle for twist-lock photocell or shorting cap, 7-pin (standard)

SP2 20kV / 10kA Surge protector TLRSR 6 SR receptacle BAC 18 Meets the requirements of the Buy American Act of 1933

(BAA)

BK Black BR Bronze GY3 Gray WH White

Roadway

RoadFocus

RFM Cobra head (medium)

Project:

Location:

Cat.No:

Type:

Lumens: Qty:

Notes:

Accessories19 (must be ordered as separate line item - quickly and easily installed in the field)

Interact City connector node (Contact the factory for additional support when connected lighting or additional services are desired.)

Shielding accessories

Description Luminaire

Option Code Accessory Ordering Code Shield vs Distribution Compatibility

12/16 LED version* 20 LED version* R2M R2S R3M R3S 4 5 Cul-de-sac shield CSS ACC-LG66V16LED-CSS ACC-LG66V20LED-CSS Yes Yes Yes Yes Yes Yes

Front side shield FSS ACC-LG66V16LED-FSS ACC-LG66V20LED-FSS Yes Yes Yes Yes No Yes

House side shield HS ACC-LG66V16LED-HS ACC-LG66V20LED-HS Yes Yes Yes Yes Yes No

Left side shield LSS ACC-LG66V16LED-LSS ACC-LG66V20LED-LSS Yes Yes Yes Yes Yes Yes

Right side shield RSS ACC-LG66V16LED-RSS ACC-LG66V20LED-RSS Yes Yes Yes Yes Yes Yes

*Refer to Wattage table to confirm light engine configuration. Example, if configuration is 2x16LED, 2 of the desired shields must be ordered per luminaire.

TS-7

Lumec RoadFocus LED Cobra head luminaires feature a sleek design that provides seamless replacement of existing HID luminaires. RoadFocus is available in three sizes, offers multiple lumen packages, and a complete array of optical distributions, making it an outstanding solution for all types of roadway applications. Includes Service Tag, innovative way to provide assistance throughout the life of the product.

1 Not available with HVU.

2 Refer to Accessories section to confirm compatibility of shields with optical distribution.

3 Use of photoelectric cell or shorting cap is required to ensure proper illumination.

4 Select either DALI or DMG or SRD or SRD1 mandatory option.

5 Please note this integrated feature come standard with RoadFocus.

6 Only available with SRD or SRD1 Driver Options.

7 Only available with DMG Driver Options 8 Not available with PH8, PH8/347, PH8/480, PHXL, PH9, DALI, SRD or SRD1 Driver Options.

9 Not available with SRD Driver Options.

10 Either RCD or RCD7 must be selected for this option.

11 Extended lead-time may apply. Consult factory.

12 FAWS table accuracy +/- 15% on these models.

13 Not available with UNV.

14 Only available with R2M or R3M distributions.

15 1 shield provided per LED light engine.

16 TLRSR must be selected with D4I 17 TLRSR and D4I must be selected with OMS

18 Failure to properly select the “BAC” suffix could result in you receiving product that is not BAA compliant product with no recourse for an RMA or refund. This BAC desig-nation hereunder does not address (i) the applicability of, or availability of a waiver under, the Trade Agree-ments Act, or (ii) the “Buy America” domestic content requirements imposed on states, localities, and other non-federal entities as a condition of receiving funds administered by the Department of Transportation or other federal agencies.

19 Consult Signify to confirm whether specific accessories are BAA-compliant.

Ordering guide example: RFL-215W96LED4K-G2-R3M-UNV-DMG-RCD7-GY3

Series

RFL

LED module CCT Generation

G2

Distribution Voltage Controls 4 Options Finish

RFL

RoadFocus large

145W64LED

135W80LED

180W80LED

270W80LED

215W96LED

85W100LED14

105W100LED14

165W100LED14

225W100LED14

305W100LED14

190W112LED

241W112LED

350W112LED

130W120LED14

200W120LED14

270W120LED14

155W140LED14

230W140LED14

310W140LED14

4K 4000K 3K 3000K 2.7K 11 2700K

G2 Generation 2

Type 2 R2S Type II short

(ASYM)

R2M Type II Medium

(ASYM)

Type 3 R3S Type III short

(ASYM)

R3M Type III Medium

(ASYM)

Type 4 4 Type IV

(ASYM)

Type 5

5 Type V

(SYMM)

UNV

120-277V

HVU

347-480V

D4I 16 Zhaga-D4i certified

DALI 1 Digitally addressable lighting interface

DMG 5 0-10V

SRD 1 Sensor ready driver, standard configuration

SRD1 1 Sensor ready driver, alternate configuration

API Factory installed NEMA label, ANSI C136.15-2015 compliant

FAWS 7 Field adjustable wattage selector CSS 2,15 Cul-de-Sac Shield FSS 2,15 Front Side Shield HS 2,15 House Side Shield LSS 2,15 Left Side Shield RSS 2,15 Right Side Shield NRC 8 No receptacle NYBC 4 - position terminal block OMS 17 Outdoor Multisensor PH8 1, 10

Twist-lock photoelectric cell, UNV

(120-277VAC)

PH8/347 10, 13 Twist-lock photoelectric cell (347VAC) PH8/480 10, 13 Twist-lock photoelectric cell (480VAC) PHXL 1, 10 Twist-lock photoelectric cell, extended life, UNV

(120-277VAC)

PH9 10 Shorting cap RCD 3, 9 Receptacle for twist-lock photocell or shorting cap, 5-pin (optional)

RCD7 3, 5 Receptacle for twist-lock photocell or shorting cap, 7-pin (standard)

SP2 20kV / 10kA Surge protector TLRSR 6 SR receptacle BAC 18 Meets the requirements of the Buy

American Act of 1933 (BAA)

BK Black BR Bronze GY3 Gray WH White

Roadway

RoadFocus

RFL Cobra head (large)

Project:

Location:

Cat.No:

Type:

Lumens: Qty:

Notes:

Accessories19 (must be ordered as separate line items - quickly and easily installed in the field) Interact City Connector node (Contact the factory for additional support when connected lighting or additional services are desired.)

Shielding accessories

Description Luminaire

Option Code Accessory Ordering Code Shield vs Distribution Compatibility

12/16 LED version* 20 LED version* R2M R2S R3M R3S 4 5

Cul-de-sac shield CSS ACC-LG66V16LED-CSS ACC-LG66V20LED-CSS Yes Yes Yes Yes Yes Yes

Front side shield FSS ACC-LG66V16LED-FSS ACC-LG66V20LED-FSS Yes Yes Yes Yes No Yes

House side shield HS ACC-LG66V16LED-HS ACC-LG66V20LED-HS Yes Yes Yes Yes Yes No

Left side shield LSS ACC-LG66V16LED-LSS ACC-LG66V20LED-LSS Yes Yes Yes Yes Yes Yes

Right side shield RSS ACC-LG66V16LED-RSS ACC-LG66V20LED-RSS Yes Yes Yes Yes Yes Yes

*Refer to Wattage table to confirm light engine configuration. Example, if configuration is 2x16LED, 2 of the desired shields must be ordered per luminaire.

RoadFocus-RFL-Spec 10/21 page 1 of 5 TS-8

† See http://creelighting.com/warranty for warranty terms

Rev. Date: V16 05/05/2022

Product Description The Cree Lighting Traveyo Series luminaire provides solid performance, future-ready engineering and a better than expected lighting experience. The TRVSM LED Street/Area luminaire offers a full range of optics and CCTs to meet the needs of the application while maintaining the familiarity of a traditional cobrahead design. Designed for easy installation, the Traveyo luminaire features tool-less entry, tool-less rotatable 7-pin photocell receptacle, T-level and +/- 5˚ fixture leveling.

Applications: Residential roads, parking lots, and general area spaces

Initial Delivered Lumens: Up to 5,500

Efficacy: Up to 149 LPW

CRI: Minimum 70 CRI

CCT: 2700K, 3000K, 4000K, 5700K, Amber

Limited Warranty†: 5 years standard on luminaire and finish, 10 years optional on luminaire and finish, up to 5 years for Synapse® accessories, 1 year on accessories

Assembled in the USA by Cree Lighting from US and imported parts (except MX, ZC, and ZZ options)

Performance Summary

Traveyo® Series Traveyo® LED Street/Area Luminaire -Small

Ordering Information Example: TRVSM-A-HT-2ME-2L-27K7-UL-BK-N

TRVSM A HT N

Product Version Mounting* Optic Lumen Package***

CCT/CRI Voltage Color Options

Utility Label/ Receptacle

Options

TRVSM

Small

A HT

Horizontal Tenon

Asymmetric

2ME**

Type II Medium

3ME**

Type III Medium

4ME**

Type IV Medium

Symmetric

5ME

Type V Medium

2L 2,000 Lumens 4L 4,000 Lumens 5L 5,000 Lumens

27K7

2700K, 70 CRI

30K7

3000K, 70 CRI

40K7

4000K, 70 CRI

57K7

5700K, 70 CRI

UL

Universal 120-277V

UH

Universal 347-480V

- Not available with TRL

CCT

BK

Black

BZ

Bronze

GY

Grey

N Utility Label and NEMA® 7-Pin Photocell Receptacle

- External wattage label per ANSI C136.15

- 7-pin receptacle per ANSI C136.41

- Factory connected 0-10V dim leads

- Requires photocell or shorting cap by others

20KV 20kV/10kA Surge Suppression

- Replaces standard 10kV/5kA surge protection

MX Shipment to Mexico

- Refer to Traveyo Logistics Options table on page 2 for details and availability

Q9/Q8/Q7/Q6/Q5/Q4/Q3/Q2/Q1 Field Adjustable Output (details pages 8-10)

- Must select Q9, Q8, Q7, Q6, Q5, Q4, Q3, Q2, or Q1

- Not available with TRL CCT

- Offers full range lumen adjustability

- Includes wattage label for setting selected

- Refer to pages 8-10 for power and lumen values

- Luminaire may also be dimmed through 7-Pin receptacle (if applicable) with use of dimming control by others

W10 10-Year Limited Luminaire/Finish Warranty ZC Shipment to Canada

- Refer to Traveyo Logistics Options table on page 2 for details and availability

ZZ International Shipment

- Refer to Traveyo Logistics Options table on page 2 for details and availability

1L 1,000 Lumens

- Available only with TRL

TRL

Turtle Friendly Amber LEDs, 625nm

- Available only with 1L

- Additional shielding (by others) may be required for Florida Fish and Wildlife Conservation Commission compliance

* Reference EPA and pole configuration suitability data on page 6-7 ** Available with Backlight Shield when ordered with field-installed accessory (see table above) *** Lumen Package codes identify approximate light output only. Actual lumen output levels may vary depending on CCT and optic selection. Refer to Initial Delivered Lumen tables for specific lumen values

Accessories

Field-Installed

Bird Spikes

TRV-BRDGRDS

Backlight Control Shield

TRV-BLSS

- Provides 1 mounting height cutoff

- Black painted aluminum construction

- Refer to initial delivered lumen tables for lumen output

Shorting Cap

XA-XSLSHRT

Cul-De-Sac Shield

TRV-CLSS

- Provides backlight and sidelight control

- Black painted aluminum construction

- Lumen multiplier (2ME/3ME/4ME): 0.75 Front Light Shield

TRV-FLSS

- Provides front light control

- Black painted aluminum construction

- Lumen multiplier (2ME/3ME): 0.91

- Lumen multiplier (4ME): 0.84

4.5" (113mm)

18.7" (475mm)

7.6" (192mm)

Utility Label Location

NEMA® 7-Pin Photocell Receptacle Location

US: creelighting.com (800) 236-6800 Canada: creelighting-canada.com (800) 473-1234

Weight

6.2 lbs. (2.8kg)

TS-9

https://www.creelighting.com/warranty https://www.creelighting.com/ https://www.creelighting-canada.com/

US: creelighting.com (800) 236-6800 Canada: creelighting-canada.com (800) 473-1234

Rev. Date: V14 05/04/2022

Product Description The Cree Lighting Traveyo Series luminaire provides solid performance, future-ready engineering and a better than expected lighting experience. The TRVMD LED Street/Area luminaire offers a full range of optics and CCTs to meet the needs of the application while maintaining the familiarity of a traditional cobrahead design. Designed for easy installation, the Traveyo luminaire features tool-less entry, tool-less rotatable 7-pin photocell receptacle, T-level and +/- 5˚ fixture leveling.

Applications: Collector roadways, parking lots, and general area spaces

Initial Delivered Lumens: Up to 11,050

Efficacy: Up to 150 LPW

CRI: Minimum 70 CRI

CCT: 2700K, 3000K, 4000K, 5700K, Amber

Limited Warranty†: 5 years standard on luminaire and finish, 10 years optional on luminaire and finish, up to 5 years for Synapse® accessories, 1 year on accessories

Assembled in the USA by Cree Lighting from US and imported parts (except MX, ZC, and ZZ options)

Performance Summary

Traveyo® Series Traveyo® LED Street/Area Luminaire - Medium

Ordering Information Example: TRVMD-A-HT-2ME-8L-27K7-UL-BK-N

TRVMD A HT N

Product Version Mounting* Optic Lumen Package***

CCT/CRI Voltage Color Options

Utility Label/ Receptacle

Options

TRVMD

Medium

A HT

Horizontal Tenon

Asymmetric

2ME**

Type II Medium

3ME**

Type III Medium

4ME**

Type IV Medium

Symmetric

5ME

Type V Medium

8L 8,000 Lumens 10L 10,000 Lumens

27K7

2700K, 70 CRI

30K7

3000K, 70 CRI

40K7

4000K, 70 CRI

57K7

5700K, 70 CRI

UL

Universal 120-277V

UH

Universal 347-480V

- Not available with TRL

CCT

BK

Black

BZ

Bronze

GY

Grey

N Utility Label and NEMA® 7-Pin Photocell Receptacle

- External wattage label per ANSI C136.15

- 7-pin receptacle per ANSI C136.41

- Factory connected 0-10V dim leads

- Requires photocell or shorting cap by others

20KV 20kV/10kA Surge Suppression

- Replaces standard 10kV/5kA surge protection

MX Shipment to Mexico

- Refer to Traveyo Logistics Options table on page 2 for details and availability

Q9/Q8/Q7/Q6/Q5/Q4/Q3/Q2/Q1 Field Adjustable Output (details pages 8-9)

- Must select Q9, Q8, Q7, Q6, Q5, Q4, Q3, Q2, or Q1

- Not available with TRL CCT

- Offers full range lumen adjustability

- Includes wattage label for setting selected

- Refer to pages 8-9 for power and lumen values

- Luminaire may also be dimmed through 7-Pin receptacle (if applicable) with use of dimming control by others

W10 10-Year Limited Luminaire/Finish Warranty

ZC Shipment to Canada

- Refer to Traveyo Logistics Options table on page 2 for details and availability

ZZ International Shipment

- Refer to Traveyo Logistics Options table on page 2 for details and availability

3L 3,000 Lumens

- Available only with TRL

TRL

Turtle Friendly Amber LEDs, 625nm

- Available only with 3L

- Additional shielding (by others) may be required for Florida Fish and Wildlife Conservation Commission compliance

* Reference EPA and pole configuration suitability data on page 6-7 ** Available with Backlight Shield when ordered with field-installed accessory (see table above) *** Lumen Package codes identify approximate light output only. Actual lumen output levels may vary depending on CCT and optic selection. Refer to Initial Delivered Lumen tables for specific lumen values

4.5" (113mm)

19.1" (485mm)

10.0" (255mm)

Utility Label Location

NEMA® 7-Pin Photocell Receptacle Location

Weight

8.6 lbs. (3.9kg)

Accessories

Field-Installed

Bird Spikes

TRV-BRDGRDM

Backlight Control Shield

TRV-BLSM

- Provides 1 mounting height cutoff

- Black painted aluminum construction

- Refer to initial delivered lumen tables for lumen output

Shorting Cap

XA-XSLSHRT

Cul-De-Sac Shield

TRV-CLSM

- Provides backlight and sidelight control

- Black painted aluminum construction

- Lumen multiplier (2ME/3ME/4ME): 0.75 Front Light Shield

TRV-FLSM

- Provides front light control

- Black painted aluminum construction

- Lumen multiplier (2ME/3ME): 0.91

- Lumen multiplier (4ME): 0.84

TS-10

https://www.creelighting.com/warranty

US: creelighting.com (800) 236-6800 Canada: creelighting-canada.com (800) 473-1234

Rev. Date: V15 05/05/2022

Product Description The Cree Lighting Traveyo Series luminaire provides solid performance, future-ready engineering and a better than expected lighting experience. The TRVLG LED Street/Area luminaire offers a full range of optics and CCTs to meet the needs of the application while maintaining the familiarity of a traditional cobrahead design. Designed for easy installation, the Traveyo luminaire features tool-less entry, tool-less rotatable 7-pin photocell receptacle, T-level and +/- 5˚ fixture leveling.

Applications: Major roads, multi-lane highways, parking lots, and general area spaces

Initial Delivered Lumens: Up to 21,700

Efficacy: Up to 153 LPW

CRI: Minimum 70 CRI

CCT: 2700K, 3000K, 4000K, 5700K, Amber

Limited Warranty†: 5 years standard on luminaire and finish, 10 years optional on luminaire and finish, up to 5 years for Synapse® accessories, 1 year on accessories

Assembled in the USA by Cree Lighting from US and imported parts (except MX, ZC, and ZZ options)

Performance Summary

Traveyo® Series Traveyo® LED Street/Area Luminaire - Large

Ordering Information Example: TRVLG-A-HT-2ME-13L-27K7-UL-BK-N

TRVLG A HT N

Product Version Mounting* Optic Lumen Package***

CCT/CRI Voltage Color Options

Utility Label/ Receptacle

Options

TRVLG

Large

A HT

Horizontal Tenon

Asymmetric

2ME**

Type II Medium

3ME**

Type III Medium

4ME**

Type IV Medium

Symmetric

5ME

Type V Medium

13L 13,000 Lumens 16L 16,000 Lumens 20L 20,000 Lumens

27K7

2700K, 70 CRI

30K7

3000K, 70 CRI

40K7

4000K, 70 CRI

57K7

5700K, 70 CRI

UL

Universal 120-277V

UH

Universal 347-480V

- Not available with TRL

CCT

BK

Black

BZ

Bronze

GY

Grey

N Utility Label and NEMA® 7-Pin Photocell Receptacle

- External wattage label per ANSI C136.15

- 7-pin receptacle per ANSI C136.41

- Factory connected 0-10V dim leads

- Requires photocell or shorting cap by others

20KV 20kV/10kA Surge Suppression

- Replaces standard 10kV/5kA surge protection

4BLT 4-Bolt Mounting

- Mounts to 2" (51mm) IP, 2.375" (60mm) O.D. horizontal tenon

MX Shipment to Mexico

- Refer to Traveyo Logistics Options table on page 2 for details and availability

Q9/Q8/Q7/Q6/Q5/Q4/Q3/Q2/Q1 Field Adjustable Output (details pages 8-10)

- Must select Q9, Q8, Q7, Q6, Q5, Q4, Q3, Q2, or Q1

- Not available with TRL CCT

- Offers full range lumen adjustability

- Includes wattage label for setting selected

- Refer to pages 8-10 for power and lumen values

- Luminaire may also be dimmed through 7-Pin receptacle (if applicable) with use of dimming control by others

W10 10-Year Limited Luminaire/Finish Warranty

ZC Shipment to Canada

- Refer to Traveyo Logistics Options table on page 2 for details and availability

ZZ International Shipment

- Refer to Traveyo Logistics Options table on page 2 for details and availability

6L 6,000 Lumens

- Available only with TRL

TRL

Turtle Friendly Amber LEDs, 625nm

- Available only with 6L

- Additional shielding (by others) may be required for Florida Fish and Wildlife Conservation Commission compliance

* Reference EPA and pole configuration suitability data on pages 6-7 ** Available with Backlight Shield when ordered with field-installed accessory (see table above) *** Lumen Package codes identify approximate light output only. Actual lumen output levels may vary depending on CCT and optic selection. Refer to Initial Delivered Lumen tables for specific lumen values

Accessories

Field-Installed

Bird Spikes

TRV-BRDGRDL

Backlight Control Shield

TRV-BLSL

- Provides 1 mounting height cutoff

- Black painted aluminum construction

- Refer to initial delivered lumen tables for lumen output

Shorting Cap

XA-XSLSHRT

Cul-De-Sac Shield

TRV-CLSL

- Provides backlight and sidelight control

- Black painted aluminum construction

- Lumen multiplier (2ME/3ME/4ME): 0.75

Front Light Shield

TRV-FLSL

- Provides front light control

- Black painted aluminum construction

- Lumen multiplier (2ME/3ME): 0.91

- Lumen multiplier (4ME): 0.84

4.5" (113mm)

22.4" (568mm)

11.2" (285mm)

Utility Label Location

NEMA® 7-Pin Photocell Receptacle Location

Weight

10.6 lbs. (4.8kg)

TS-11

https://www.creelighting.com/warranty

ALED4T260/480/D10

Need help? Tech help line: (888) 722-1000 Email: sales@rablighting.com Website: www.rablighting.com Copyright © 2022 RAB Lighting All Rights Reserved Note: Specifications are subject to change at any time without notice

Color: Bronze Weight: 79.4 lbs

Project: Type:

Prepared By: Date:

Driver Info

Type Constant Current

120V N/A

208V N/A

240V N/A

277V N/A

Input Watts 254.6W

LED Info

Watts 260W

Color Temp 5000K (Cool)

Color Accuracy 72 CRI

L70 Lifespan 100,000 Hours

Lumens 31,793 lm

Efficacy 124.9 lm/W

Technical Specifications

Compliance

UL Listed:

Suitable for wet locations

IP Rating:

Ingress protection rating of IP66 for dust and water

IESNA LM-79 & LM-80 Testing:

RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80

DLC Listed:

This product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities.

DLC Product Code: P4H5AGD8

Performance

Lifespan:

100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations

Wattage Equivalency:

Equivalent to 875W Pulse Start Metal Halide

Construction

IES Classification:

The Type IV distribution (also known as a Forward Throw) is especially suited for mounting on the sides of buildings and walls, and for illuminating the perimeter of parking areas. It produces a semicircular distribution with essentially the same candlepower at lateral angles from 90° to 270°.

Maximum Ambient Temperature:

Suitable for use in up to 40°C (104°F)

Cold Weather Starting:

The minimum starting temperature is -40°C (-40°F)

Thermal Management:

Superior thermal management with external "Air- Flow" fins

Lens:

Tempered glass lens included

Housing:

Die-cast aluminum with airflow fins for cooling

Mounting:

Heavy-duty 1/2" thread mounting arm with "O" ring seal & stainless steel screws

Reflector:

Vacuum-metalized polycarbonate

REPLACE AREA LIGHT

TS-12

Copyright © 2022 RAB Lighting All Rights Reserved Note: Specifications are subject to change at any time without notice

Technical Specifications (continued)

Construction

Gaskets:

High-temperature silicone gaskets

EPA:

1 Fixture: 1.2 2 Fixtures at 90°: 2.0 2 Fixtures at 180°: 4.2 3 Fixtures at 90°: 4.2 4 Fixtures at 90°: 3.5

Finish:

Formulated for high durability and long-lasting color

Green Technology:

Mercury and UV free. RoHS-compliant components.

LED Characteristics

LEDs:

Multi-chip, high-output, long-life LEDs

Color Consistency:

7-step MacAdam Ellipse binning to achieve consistent fixture-to-fixture color

Color Stability:

LED color temperature is warrantied to shift no more than 200K in color temperature over a 5-year period

Color Uniformity:

RAB's range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.

Electrical

Driver:

Constant Current, Class 2, 480V, 50/60Hz, 480V:

0.55A

Dimming Driver:

Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.

THD:

8.85% at 480V

Power Factor:

94.4% at 480V

Surge Protection:

4kV For areas prone to surges, upgrade to 10kV surge protection. See 10kV surge protectors here.

Other

Warranty:

RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.

Buy American Act Compliance:

RAB values USA manufacturing! Upon request, RAB may be able to manufacture this product to be compliant with the Buy American Act (BAA). Please contact customer service to request a quote for the product to be made BAA compliant.

Dimensions Features

66% energy cost savings vs. HID

100,000-hour LED lifespan

5-Year, No-Compromise Warranty

TS-13

https://www.rablighting.com/filter/ACCALED https://www.rablighting.com/legal#warranty

Copyright © 2022 RAB Lighting All Rights Reserved Note: Specifications are subject to change at any time without notice

Ordering Matrix

Family Distribution Wattage Mounting Color Temp Finish Dimming Driver Options Sensor Options Other Options

ALED 4T 260 /480/D10

4T = Type IV 3T = Type III 2T = Type II

260 = 260W 360 = 360W

Blank = Pole SF = Slipfitter

Blank = 5000K Cool

N = 4000K Neutral

Y = 3000K Warm

Blank = Bronze

W = White

/D10 = 120-277V, 0-10V Dim /480/D10 = 480V, 0-10V Dim

Blank = No Option /PCT = 120-277V Twistlock

Photocell /PCT4 = 480V Twistlock

Photocell /WS4 = Motion

Sensor/Photocell 1

/WS10 = Motion Sensor/Photocell 1

/LC = Lightcloud® Controller

USA = BAA

Compliant

Blank = Standard

1 Not available for slipfitter models.

TS-14

SPECIFICATIONS

DS330

Fatigue Resistant

Soft Square Steel Post

Job Name:

Job Location - City: State:

Product: Quote:

Client Name:

Created By: Date:

Customer Approval: Date:

VALMONT INDUSTRIES, INC. 28800 IDA STREET, PO BOX 358 - VALLEY, NE 68064 USA 800.825.6668 VALMONTSTRUCTURES.COM

Pole Shaft - The pole shaft is fabricated from hot rolled welded steel tubing of one-piece construction with a minimum yield strength of 55 KSI.

Pole Top – A removable pole cap is provided for poles receiving drilling patterns for side-mount luminaire arm assemblies. For top mount luminaire and/or bracket consult the factory. Consult the luminaire manufacturer for correct tenon size or drill pattern. Other pole top options include pole cap only (PC) or plain top (PL) which is typical when the pole top diameter matches the necessary slip fit dimensions.

Handhole – A reinforced handhole with grounding provision is provided at 1'-6" from the base end of the pole assembly. Each handhole includes an easy to install, self-contained Swing Latch handhole cover assembly. U.S.

Patent Swing Latch cover is fabricated from durable polycarbonate/ABS blend plastic. All pole assemblies are provided with a 2.50" x 5.00" rectangular handhole. Handhole dimensions are nominal.

Base Cover – A two-piece full base cover fabricated from ABS plastic is provided with each pole assembly. Additional base cover options, including the dart square (2T) cast aluminum cover, are available upon request.

Anchor Bolts - Anchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12" on the threaded end.

Hardware - All structural fasteners are galvanized high strength carbon steel.

All non-structural fasteners are galvanized or zinc-plated carbon steel or stainless steel.

Finish - Standard finishes are either Galvanized (GV) or Finish Painted (FP).

Additional finish options including Finish Paint over Galvanizing (FPGV) or any of the V-PROTM Finish Coating Systems are available upon request. See the product ordering code for color options.

Design Criteria - Please reference Design Criteria Specification for appropriate design conditions.

Full Base Cover (Standard)

Pole Cap - Plastic

Handhole

1'-6"

N om in al

M ou nt in g H ei gh t

Tenon Top*

Dart Square - 2T (Optional)

Cross Section

Soft Square

Handhole

DS330

* Consult factory on loading criteria for pole top mounted luminaires and/or brackets.

TS-15

DESIGNATION,LOAD AND DIMENSIONAL DATA

ANCHORAGE DATA

VALMONT INDUSTRIES, INC. 28800 IDA STREET, PO BOX 358 - VALLEY, NE 68064 USA 800.825.6668 VALMONTSTRUCTURES.COM

PRODUCT ORDERING CODES

Job Name:

Job Location - City: State:

Product: Quote:

Client Name:

Created By: Date:

Customer Approval: Date:

DS330

Fatigue Resistant Soft Square Steel Post

1. Maximum EPA (Effective Projected Area) and weight values are based on side mounted fixtures only. Consult factory on loading criteria for pole top mounted luminaires and/or brackets. Variations from sizes above are available upon inquiry at the factory. Satisfactory performance of poles is dependent upon the pole being properly attached to a supporting foundation of adequate design.

2. Structure weight is a nominal value which includes the pole shaft and base plate only.

3. Belled-bottom will have reduced thickness due to the cold-working process. However, the belled-bottom meets or exceeds the structural capacity of the original square section. In addition, the rounded section provides better fatigue resistance.

90°

DESIGN INFORMATION POLE DIMENSIONS3

NOMINAL

MOUNTING

HEIGHT

80 MPH

w/1.3 GUST

90 MPH

w/1.3 GUST

100 MPH

w/1.3 GUST SHAFT

BASE

SQUARE3

(IN)

SHAFT

TOP

SQUARE

(IN)

WALL

THK

(GA)

STRUCTURE

WEIGHT2

(LBS)

MAX

EPA1

(SQ FT)

MAX

WEIGHT1

(LBS)

MAX

EPA1

(SQ FT)

MAX

WEIGHT1

(LBS)

MAX

EPA1

(SQ FT)

MAX

WEIGHT1

(LBS)

10'-0" 30.6 765 23.8 595 18.9 473 4.00 4.00 11 75 400Q100 12'-0" 24.4 610 18.8 470 14.8 370 4.00 4.00 11 90 400Q120 14'-0" 19.9 498 15.1 378 11.7 293 4.00 4.00 11 100 400Q140 16'-0" 15.9 398 11.8 295 8.9 223 4.00 4.00 11 115 400Q160 18'-0" 12.6 315 9.2 230 6.7 168 4.00 4.00 11 125 400Q180

20'-0"

9.6 240 6.7 167 4.5 150 4.00 4.00 11 140 400Q200

17.7 443 12.7 343 9.4 235 5.00 5.00 11 185 500Q200

28.1 703 21.4 535 16.2 405 5.00 5.00 7 265 500W200

25'-0"

4.8 150 2.6 100 1.0 50 4.00 4.00 11 170 400Q250

10.8 270 7.7 188 5.4 135 4.00 4.00 7 245 400W250

9.8 245 6.3 157 3.7 150 5.00 5.00 11 225 500Q250

18.5 463 13.3 333 9.5 238 5.00 5.00 7 360 500W250

30'-0"

6.7 168 4.4 110 2.6 65 4.00 4.00 7 291 400W300

4.7 150 2.0 50 N/A N/A 5.00 5.00 11 265 500Q300

10.7 267 6.7 167 3.9 100 5.00 5.00 7 380 500W300

19.0 475 13.2 330 9.0 225 6.00 6.00 7 520 600W300

35'-0" 5.9 150 2.5 100 N/A N/A 5.00 5.00 7 440 500W350

12.4 310 7.6 190 4.2 105 6.00 6.00 7 540 600W350

40'-0" 7.2 180 3.0 75 N/A N/A 6.00 6.00 7 605 600W400

DESIGNATION

POLE BASE PLATE ANCHOR BOLTS

POLE

BASE

SQUARE

(IN)

WALL

THK

(GA)

BOLT CIRCLE

SQUARE

(IN)

THK

(IN)

DIA x LENGTH x HOOK

(IN)

PROJECTION

(IN)

(IN)

DIA

(IN)

(IN)

4.00 11 8.50 0.50 8.25 0.750 0.75 x 17.00 x 3.00 3.50 0.25

4.00 7 8.50 0.50 8.25 0.875 0.75 x 17.00 x 3.00 3.63 0.25

5.00 11 11.00 1.00 11.00 1.000 0.75 x 17.00 x 3.00 3.75 0.25

5.00 7 11.00 1.00 11.00 1.000 0.75 x 17.00 x 3.00 3.75 0.25

6.00 7 12.00 1.00 12.50 1.000 1.00 x 36.00 x 4.00 4.25 0.25

0° - Handhole

270°90°

180°

Bolt Circle

Bolt Slots/Holes

As viewed from top of pole.

Anchor Base Detail

DS330

Drill Mounting (See Orientation) D1 = (1) Drilling @ 270° D2 = (2) Drillings @ 90° & 270° D4 = (4) Drillings @ 0°, 90°, 180°, & 270° D5 = (2) Drillings @ 180° & 270° D6 = (3) Drillings @ 90°, 180°, & 270°

Tenon Mounting P2 = 2.38" OD x 4" tenon P4 = 4.00" OD x 6" tenon P5 = 2.88" OD x 4" tenon P6 = 2.88" OD x 5" tenon P7 = 2.38" OD x 5" tenon P9 = Special Size (Specify)

Other Options PC = Pole Cap PL = Plain Top (No Cap)

GV = Galvanized FP = Finish Painted

-----OPTIONAL-----

FPGV = Finish Paint over Galvanizing VP30 = V-PRO™ 30 System VP32 = V-PRO™ 32 System VP53 = V-PRO™ 53 System VP54 = V-PRO™ 54 System VP57 = V-PRO™ 57 System VP100 = V-PRO™ 100 System VP105 = V-PRO™ 105 System

GV = Galvanized BK = Black DB = Dark Bronze MB = Medium Bronze WH = White LG = Light Gray CB = Bronze DG = Dark Green ST = Sandstone HTG = Hunter Green SG = Slate Gray SL = Silver SC = Special Color (Specify)

FBC = Full Base Cover

-----OPTIONAL-----

2T = Square Dart Cover

AB = With Anchor Bolts LAB = Without Anchor Bolts

Select Correct Designation from the Load and

Dimensional Data Chart.

DESIGNATIONMODEL FIXTURE MOUNTING FINISH SYSTEM STANDARD COLOR OPTIONS BASE COVER ANCHOR BOLTS SUPPLEMENTAL INFO

DS330

S P

C

2/ v al m on ts tru ct ur es .c om c ar rie s th e m os t c ur re nt s pe c in fo rm at io n an d su pe rs ed es th es e gu id el in es

CUSTOM FABRICATED FOR 14.25" BOLT CIRCLE

TS-16

DS330 - Fatigue Resistant Square Non-Tapered Steel Pole

S P

C

2/ v al m on ts tru ct ur es .c om c ar rie s th e m os t c ur re nt s pe c in fo rm at io n an d su pe rs ed es th es e gu id el in es

VALMONT INDUSTRIES, INC. 28800 IDA STREET, PO BOX 358 - VALLEY, NE 68064 USA 800.825.6668 VALMONTSTRUCTURES.COM

TS-17

Catalog Number

Notes

Type

OUTDOOR POLE-AMAWT-SMAWT

FEATURES & SPECIFICATIONS

INTENDED USE — For wood poles.

CONSTRUCTION —

Aluminum: Body is schedule 40 aluminum pipe 6063-T6. Welding follows indus-try standards best practices.

Arms are pressure-washed after fabrication.

Steel: Body is constructed from A500 Grade B steel tubing. Welding follows industry standards best practices.

Bracket is galvanized (per ASTM A-123) or painted after fabrication.

FINISH — Extra durable standard powder-coat finishes include Dark Bronze, White, Black, and Natural Aluminum colors. Architectural Colors and Special Finishes are available by quote and include, but are not limited to RAL Colors, Custom Colors, Extended Warranty Finishes, Hot-dipped Galvanized, Paint over Hot-dipped Galvanized for steel, Brushed Aluminum, and Anodized Dark Bronze, Anodized Natural Aluminum and Anodized Black for aluminum. Factory-applied primer paint finish is available for customer field-paint applications.

INSTALLATION — Mounting hardware to be provided by installer and is determined by the pole type and shaft size.

WARRANTY — 1-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/support/warranty/terms-and-conditions

NOTE: Actual performance may differ as a result of end-user environment and application.

Specifications subject to change without notice.

Truss Arm

AMAWT/SMAWT

ALUMINUM (AMAWT) OR STEEL (SMAWT)

TRUSS ARM

Series Pipe Size Arm length Finish 3

AMAWT

SMAWT

T20 2-3/8" O.D. (2" NPS)

US6 6' arm length US8 8' arm length US10 10' arm length US12 12' arm length US14 14' arm length US15 15' arm length US16 16' arm length US18 18' arm length US20 20' arm length

Super durable paint colors DDBXD Dark bronze DBLXD Black DNAXD Natural aluminum DWHXD White DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured natural aluminum DWHGXD Textured white Other finishes3

BA Brushed aluminum SA Satin aluminum GALV Galvanized steel Class 1 architectural anodized ABL Black ADB Dark bronze ANA Natual Primer finish DPRM Red primer Architectural colors and special finishes Paint over galvanized, RAL colors, custom colors and extended warranty finishes available for steel.