Tech Data - Mens Jumper White.pdf

JUMPER, MAN'S, WHITE

ADDITIONAL INFORMATION FOR NCTRF PD-87037C:

PATTERN DATE: 2 February 2024

STANDARD SAMPLE OF CLOTH, TWILL, POLYESTER, WHITE SHADE NUMBER 3006,

UNDER MIL-C-87052, IS AVAILABLE AND APPLICABLE FOR SHADE, COLORFASTNESS

TO LIGHT, LAUNDERING, BLEACHING, DRY CLEANING, PERSPIRATION TO ALKALINE,

ACID AND FINISH UNDER PIECE NO. 17027

AN EMBROIDERY FILE FOR THE STAR REPLACES THE DRAWING "STITCH

ENLARGEMENT FOR 5-POINTED STAR (/4 INCH DIAMETER)" 16-1-16021.

\\phl1i210\udn7415\system\desktop\Ebroidered Star.DST

NOMENCLATURE: CROWTACK STITCH ENLARGEMENT: DRAWING NUMBER 01-NCTRF-15

Dated May 27, 2015

LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

A. THIS SOLICITATION/AWARD CONSISTS OF THE FOLLOWING DOCUMENTS, EXHIBITS, AND OTHER

ATTACHMENTS.

B. DLA TROOP SUPPORT CLOTHING AND TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREEMENTS DATED August 2021, SUPERSEDES DSCP 4155.3, QUALITY SYSTEMS REQUIREMENTS, DATED October 2018.

THE CONTRACTOR SHALL STAMP LEGIBLY WITH INDELIBLE INK THE LOT NUMBER ON EACH END ITEM

AND OUTER CONTAINER IN THE LOT.

THE INSPECTION LEVELS AND ACCEPTABLE QUALITY LEVELS (AQL’S) EXPRESSED

IN DEFECTS PER 100 UNITS FOR VISUAL AND DIMENSIONAL EXAMINATIONS SHALL

BE AS FOLLOWS:

INSPECTION

AQL’S LEVEL

FOR VISUAL EXAM. 4.4.3

CRITICAL 0.010 III

MAJOR 1.0 III

MINOR 4.0 III

TOTAL (MAJOR AND MINOR ONLY) 10.0 III

FOR DIMEN. EXAM. IN 4.4.4

ONE CLASS 2.5 S-3

THE AQL SHALL BE 2.5 DEFECTS PER 100 UNITS.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED

UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON

WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII

(PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE

TYPE VIII (TAG, PAPER) OF MIL-DTL-32075.

file://phl1i210/udn7415/system/desktop/Ebroidered%20Star.DST

PAGE 6, PARAGRAPH 7.1DELETE AND SUBSTITUTE.”SOURCE OF GOVERNMENT DOCUMENTS.

COPIES OF MILITARY AND FEDERAL DOCUMENTS ARE AVAILABLE HTTP://QUICKSEARCH.DLA.MIL.

COPIES OF THE PURCHASE DESCRIPTIONS FOR THE NAVY’S WHIE MAN’S JUMPER, NCTRF PD 87037, AND WOMAN’S JUMPER, NCTRF PD 24949, ARE AVAILABLE FROM

HTTP://WWW.DLA.MIL/TROOPSSUPPORT/CLOTHINGAND TEXTILES/SPECREQUEST.ASPX.”.

PAGE 7, PARAGRAPH 7.2.1, LINE 3 DELETE “HTTP://WARFIGHTER.DLA.MIL AND SUBSTITUTE

HTTP://WWW.DLA.MIL/TROOPSUPPORT/CLOTHINGANDTEXTILES/SPECREQUEST.ASPX.

MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

COMMERCIAL ITEM DESCRIPTION A-A-52071A

DATED 25 APRIL 1990 HAS BEEN AUTHORIZED FOR

USE IN PLACE 0F DDD-T-86H.

"THE REQUIREMENT FOR THE HERRINGBONE TAPE IS TYPE I, 3/16 INCH WIDTH AND

58 PICKS PER INCH FROM TABLE I. PHYSICAL REQUIREMENTS."

ADDITIONAL INFORMATION FOR A-A-52071:

TAPE, TEXTILE, COTTON, FOR GENERAL USE.

ADDITIONAL INFORMATION FOR MIL-P-15011:

NO ADDITIONAL INFORMATION FOLLOWS.

THE FOLLOWING INTERIM CHANGES ARE APPLICABLE TO A-A-52071:

DOCUMENT TITLE, DELETE “COTTON”.

1.1, AFTER “CLASS 3-DYED”, ADD “CLASS 4-SOLUTION DYED POLYESTER”.

2.1, LINE 1, AFTER “COTTON YARNS”, AD “EXCEPT CLASS 4 SHALL BE POLYESTER”.

2.2, AFTER LINE 1, ADD “THE CLASS 4 TAPE SHALL BE SOLUTION DYED ONLY”.

2.3, LINE 2, AFTER “CLASS 2”, ADD “AND CLASS 4”.

2.4, LINE 1, DELETE “1,2, AND 3”AND SUBSTITUTE “1,2,3, AND 4”.

PAGE 4, 5.3.1, DELETE AND SUBSTITUTE:”COPIES OF MILITARY AND FEDRAL DOCUMENTS ARE AVAILABLE FROM HTTP://QUICKSEARCH.DLA.MIL. COPIES OF THE PURCHASE DESCRIPTIONSFOR THE NAVY’S WHITE MANS JUMPER, NCTRF PD 87037, AND WOMEN’S JUMPER, NCTRF PD 24949, ARE AVAILABLE FROM HTTP://WWW.DLA.MIL/TROOPSUPPORT/CLOTHINGANDTEXTILES/SPECREQUEST.ASPX.”.

ADD NEW PARAGRAPH:

“5.3.2. SOURCE OF NON-GOVERNMENT DOCUMENTS. COPIES OF NON-GOVERNMENT STANDARDS ARE

AVAILABLE FROM THE SOURCES LISTED BELOW.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)

P.O. BOX 12215

RESEARCH TRIANGLE PARK, NC 27709-2215

HTTP://WWW.AATCC.ORG”.

ASTM-D-5118, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING

BOXES, AND ASTM-D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING

AND REINFORCING FIBERBOARD SHIPPING CONTAINERS.

(ref. T0857 - 6/15/06)

ADDITIONAL INFORMATION FOR MIL-C-87052:

INTERIM SPECIFICATION CHANGES TO MIL-C-87052B:

PAGE 6, PARA. 4.4.2.1, LINE 13, DELETE "25" AND

SUBSTITUTE "17", LINES 15 & 18, DELETE "38" AND

SUBSTITUTE "26".

ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN

CANCELLED AND REPLACED BY ASTM-D-6193, 4/98

STANDARD PRACTICES FOR STITCHES AND SEAMS.

http://quicksearch.dla.mil/ http://www.dla.mil/TROOPSSUPPORT/CLOTHINGAND%20TEXTILES/SPECREQUEST.ASPX http://www.dla.mil/TROOPSUPPORT/CLOTHINGANDTEXTILES/SPECREQUEST.ASPX http://quicksearch.dla.mil/ http://www.dla.mil/TROOPSUPPORT/CLOTHINGANDTEXTILES/SPECREQUEST.ASPX http://www.aatcc.org/

THIS STANDARD SHOULD BE USED IN PREFERENCE

TO FED-STD-751.

(ref. T0216 - May 18, 2006)

ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4:

NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED.

APPLICATION FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN SOCIETY FOR QUALITY

600 NORTH PLANKINTON AVENUE

MILWAUKEE, WISCONSIN 53203

(Ref. T0795 - May 17, 2006)

INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2

STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is hereby canceled.

Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product", or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes".

Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.

(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207- 6028.)

MIL-STD-129R, WITH CHANGE 3 - DEPARTMENT OF DEFENSE STANDARD PRACTICE

MILITARY MARKING FOR SHIPMENT AND STORAGE - DATED

19 SEPTEMBER 2007

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE

MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA

TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING

CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS

OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER

TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE

STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147 IS HEREBY REINSTATED AS FOLLOWS:

MIL-STD-147E DEPARTMENT OF DEFENSE

16 MAY 2008 STANDARD PRACTICE

PALLETIZED UNIT LOADS

BOXES USED FOR SHIPPING SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-129, "MARKING FOR

SHIPMENT AND STORAGE".

DEVELOPMENT AND APPLICATION OF PACKAGING REQUIREMENTS SHALL BE IN ACCORDANCE WITH MIL- STD-2073-1, "DOD MATERIALS PROCEDURES FOR DEVELOPMENT AND APPLICATION OF PACKAGING

REQUIREMENTS".

PACKAGING REQUIREMNTS CODES SHALL BE IN ACCORDANCE WITH MIL-STD-2073-2, "PACKAGING

REQUIREMENTS CODE".

STANDARDS (COMMERCIAL)

ASME-MH1 American Society of Mechanical Engineers (ASME) Pallets, Slip Sheets, and Other Bases For Unit Loads, for construction of pallets.

STITCH ENLARGEMENT DRAWING FOR CROWTACK:

01-NCTRF-15 CROWTACK FOR JUMPERS

. 5/27/2015

THIS IS A TYPE II (CODE 7) SHELF LIFE ITEM

WITH A SHELF LIFE OF 36 MONTHS (EXTENDABLE).

NOTE: PARAGRAPH 5.2.1 OF

MIL-STD-129P W/CHANGE 3 IS APPLICABLE.