Tech Data June 24.docx

FACEMASK, FLYERS, COLD WEATHER, CWU-110/P

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.

(End of TQ Requirement)

IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING.

SIZE NSN UPC

MED-LARGE 8415-01-558-3536 718020089577

XLARGE 8415-01-558-3538 718020069029

PART OF NAVY MULTI-CLIMATE PROTECTION (MCP) CLOTHING ASSEMBLY

FACEMASK SHALL BE MADE IN ACCORDANCE WITH CLASS 1

OF NAWC PD 4631-04-23A DATED 24 OCTOBER 2012.

PATTERN DATE: 9 FEBRUARY 2009

SHADE STANDARD SAMPLE FOR BLACK 3239, CLOTH, KNITTED, VELOUR, FR, NAWC PD 4631-04-01 IS AVAILABLE UNDER PIECE NUMBER 06054.

SHADE STANDARD SAMPLE FOR GREEN 3438, CLOTH, KNITTED, FLEECE, WIND RESISTANT, FR, NAWC PD 4631-04-03 IS AVAILABLE UNDER PIECE NUMBER 14311.

SHADE STANDARD SAMPLE FOR BLACK 3241 CLOTH, KNITTED, SILK WEIGHT, STRETCH, FR NAWC PD 4631-04-08, TYPE I IS AVAILABLE UNDER PIECE NUMBER 21225.

DEVIATIONS/CHANGES TO NAWC PD 4631-04-23A:

No Additional Changes

DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF MIL-DTL-32075.

"MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE

TYPE VI FINISHED LABEL." UNDER "TEARING

STRENGTH" DELETE: "(LB.) MINIMUM" AND

SUBSTITUTE: "(GNS) MINIMUM."

PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD

"AND THE UNIVERSAL PRODUCT CODE (UPC)

SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."

NAWC PD 4631-04-03

Cloth, Knitted, Fleece, Wind Resistant, Flame Resistant 21 October 2008

Deviations/ Changes To NAWC PD 4631-04-08A, Dated 24 Sept 2009:

Page 1, Paragraph 1.2.1, Line 5, Delete "Black 3239" and substitute "Black 3241".

Page 3, Paragraph 3.3.3, Line 6, Delete "Black 3239" and substitute "Black 3241".

Page 5 3.3, Table I, under “Stretch and Growth” characteristic, delete and substitute:

REQUIREMENT

TYPE II REQUIREMENT

Stretch & Growth

Growth, Form Fitting:

1. After 2 hr. ± 5 min:

a. 60 sec after releasing, wale, max

b. 60 sec after releasing, course, max

c. 1 hr. after releasing, wale, max

d. 1 hr. after releasing, course, max

Stretch, Form Fitting:

Wale, max Course, max

3.0% 5.0% 2.0% 2.0%

50% 270%

2.5% 5.4% 1.3% 4.2%

16.30% 190%

Deviations/Changes to NAWC PD 4631-04-01:

Paragraph 3.3, Table I, Line 4 and 5, for "Dimensional Stability" under "Requirement" column delete and substitute:

Wales 5 Courses 7

THREAD, ARAMID, SPUN STAPLE, A-A-55217B, DATED 29 MARCH 2011

ADDITIONAL INFORMATION FOR A-A-55217

STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS MIL-C-44436,

ROLL #3728, (THE FOLIAGE GREEN 502 AREA OF THE PATTERN)

AND REFERENCE FOR SHADE ONLY.

ADDITIONAL INFORMATION FOR ASTM-D-6193(2004)OR LATEST VERSION:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T8068 - May 18, 2006)

ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4:

NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED.

APPLICATION FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN SOCIETY FOR QUALITY

600 NORTH PLANKINTON AVENUE

MILWAUKEE, WISCONSIN 53203

(Ref. T0795 - May 17, 2006)

GENERAL INSPECTION LEVEL II IN ACCORDANCE WITH LATEST VERSION OF ANSI/ASQ Z1.4 FOR VISUAL AND DIMENSIONAL. AQL SHALL BE 4.0 MAJOR AND 10.0 MAJOR/MINOR.

SECTION D PACKAGING

CASE LOT QUANTITY OF 96 MASKS.

PACKAGING SHALL BE IN ACCORDANCE WITH BARRIER MATERIAL, GREASEPROOF, WATERPROOF, FLEXIBLE, HEAT-SEALABLE; MIL-PRF-121G, TYPE II WHICH IS NECESSARY TO PROVIDE PROTECTION FROM EXPOSURE TO THE EXTREMES OF THE NAVAL AVIATION ENVIRONMENT.

AS A MINIMUM ITEMS SHALL BE PACKED IN A SNUG FITTING FIBERBOARD SHIPPING CONTAINER CONFORMING TO ASTM-D-5118 TYPE CF, STYLE RSC, VARIETY SW, CLASS DOMESTIC, WITH A DOUBLE WALL LINER. ANY COMMERCIAL CLOSURE METHOD CITED IN ASTM-D-1974 IS ACCEPTABLE EXCEPT STAPLING.

PACKAGING SHALL BE AS PER ASTM-D-3951, MIL-STD-129, MIL-STD-147. LOT NIMBERING SHALL BE IN ACCORDANCE WITH MIL-STD-129 and DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements.