Surfacing_Specifications-Rubberized_Tiles-PlayMatta.pdf
PDF 651 KB Posted
- Solicitation number
- 25/26-0042
- Issued by
- San Bernardino County, California
About this file
Summary
This file comprises surfacing specifications and a generic bid document for Play Matta System rubberized interlocking playground safety tiles, along with a contract opportunity from the Fontana Unified School District (FUSD) in California for playground equipment and surfacing maintenance and repairs. The Play Matta System consists of resilient, injection-molded virgin PVC tiles measuring 19.75" x 19.75" with a 1-inch thickness, featuring 0.75-inch 9-lug interlocking configurations and 145 hollow compression columns per tile. The system includes multiple critical fall height options (ranging from 5 feet to 10 feet) through combinations of tiles with various shock pads (PP-F35, PP-F55, PP-25PS, and PP-45PS), with tiles available in standard colors (grays, blues, greens, browns, black) and bright colors (red, orange, yellow, bright green, bright blue, purple, white). The FUSD contract opportunity, Bid No. 25/26-0042, seeks sealed bids through the OpenGov procurement portal with a deadline of 2:00 p.m. on Monday, May 25, 2026. The District estimates up to $500,000 for one year of playground maintenance and repairs services.
The contractor shall provide all labor, installation hardware, incidentals, and related services, with playground equipment and surfacing materials supplied by the District. Installation must be completed by manufacturer-certified installers and comply with ASTM F1292-22, ASTM F1951-14, CPSC guidelines, and ISO 9001 and ISO 45001 standards. The manufacturer, Matta LLC (located in Wildomar, California), must have a minimum of 20 years of experience in playground safety surfacing manufacturing. A minimum 6-year non-prorated warranty covering defects in materials and workmanship is required from the date of Final Acceptance. The specifications include detailed technical requirements for subsurface preparation, aggregate depth of minimum 4 inches, concrete borders with specified dimensions and rebar, geotextile fabric installation, and heat-welded interlocking tile systems. The bid document is for informational purposes and does not constitute a binding commitment by FUSD regarding the estimated spend amount.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
D5206 Play Matta System Concrete Border to Wall
UV stabilized geotextile fabric
Shockpad (if required):
A system 2
B system 1
Geotextile fabric (if required)
Compacted base = 4" min /
Concrete
Acceptable earth base
Finish grade
5" min
4"
U section 1
U includes mat
Play Matta Mat = 1"
1/8" min top of border lip
1/4" max to top of shockpad
3" fixing pin
(drill Ø
" hole)
Existing Wall
4" Steel Pins fixed into masonry edge at 3' centers. They can be on an angle
A System: 2
B System: 1"
Mat Only: 0"
Sheet
Scale
Project
Date
Date
Project Name
No.
Revision Table
Changed
By
D5206
PLAY MATTA SYSTEM
CONCRETE BORDER
TO EXISTING WALL
D5206
June 4 2020
NOT TO SCALE
MATTA LLC
1910 S Archibald Ave, Unit G
Ontario, CA 91761
PO Box 1180 Chino, CA 91708
02 05/31/2018 NS
03 11/26/2018 Moe
04 03/06/2019 NS
05 06/04/2020 NS
Outer limit of use zone
1" PlayMatta Original mat
Finish grade
Shockpad
Compacted base for leveling or if soil is too soft
UV stabilized geotextile fabric
Geotextile fabric
Bottom grade acceptable earth base
3" fixing pin (drill Ø3/8" hole)
Form pocket in concrete using timber or install a machine extruded border to correct dimensions
2,500 PSI concrete border w/# 3 rebar / continuous
NOTE:
REFER TO EXPANSION JOINT
AND DRYWELL DETAIL IN
DRAWING NO. CVL-030
T section
D4213 Play Matta System New Concrete Border (Inground)
10"
3"
3" 3
" 3"
"-0"
Recompact after asphalt/concrete removal
" min -
" max
Top of concrete nailer to top of shock pad
8" min
6"
A System = 2
B System = 1
F35 System = 1
F55 System = 2
F70 System = 2
F90 System = 3
Top of border to be at or above finish grade
Radius
" T-Section
" U-Section
Sheet
Scale
Project
Date
Date
Project Name
No.
Revision Table
Changed
By
D4213
PLAY MATTA A/B SYSTEM
NEW CONCRETE NAILER
D4213
Oct 22 2024
NOT TO SCALE
MATTA LLC
1910 S Archibald Ave, Unit G
Ontario, CA 91761
PO Box 1180 Chino, CA 91708
05 05/28/2020 NS
04 03/06/2019 NS
06 07/24/2024 LL
07 10/22/2024 LL
Generic Bid Document US – Playground Safety Surfacing
Generic Bid Document
(US version)
DIVISION 3
1. PART 1 – GENERAL
1.1 SECTION INCLUDES
(a) Resilient, Multi-Layered Interlocking, Playground Safety Surfacing Tiles.
1.2 REFERENCES
Specifiers Notes: The following standards are associated with playground and recreational construction projects. This article does not require compliance with standards and is only a listing of those used for reference.
(a) The following standards and definitions are applicable to the work of this Section to the extent referenced herein:
(i) ASTM F 1951-14 – Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
(ii) ASTM F 1292-18E1 – Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment
(iii) ASTM E303 - Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
(iv) ASTM D2859 – Ignition Characteristic Of Finished Textile Floor Coverings
(v) US Consumer Product Safety Commission (CPSC) Handbook for Playground Safety
(vi) IPEMA Certified for ASTM F1292-22
1.3 SAMPLES AND SUBMITTALS
(a) Comply with Submittal Procedures - Section 01330 (01 33 00)
(b) Product Data: Submit manufacturer’s product data for the following components and all installation and/or subsurface recommendations:
(i) Colored top mat
(ii) UV stabilized geotextile fabric
(iii) Edge Piece
(iv) Shock pad
(v) Oyster Mesh
(c) Samples: Submit manufacturer provided sample box (which will include tile, geotextile fabric and shock pad samples)
(d) Test Reports: Are available on request
(e) Installation and Maintenance:
(i) Submit certified installation certificate issued by manufacturer
(ii) Submit manufacturer’s maintenance and cleaning instructions
(f) Certificate of Compliance: Submit manufacturer's certificate of compliance indicating materials comply with specified requirements.
(g) Warranty Statement: Submit manufacturer’s standard warranty.
1.4 PROJECT/SITE CONDITIONS
(a) Atmospheric temperature is above 40°F for a minimum of 24hours before and during installation, preferably climbing.
(b) Tile and Air Temperature: Consult manufacturer’s installation instructions for all installations procedure when tile or air temperatures are above 90 degrees F.
1.5 QUALITY ASSURANCE
(a) Manufacturer Qualification: Manufacturer shall meet the following 2 requirements:
(i) Playground safety surfacing tiles manufactured in accordance with ISO 9001 (Quality) and ISO 45001 (Health and Safety)
(ii) Manufacturer to have minimum of 20 years experience in manufacturing playground safety surfacing.
(b) Installer Qualifications: Employ persons trained for installation of playground safety surfacing tiles and who hold current manufacturer issued Certified Installer certificate.
1.6 DELIVERY, STORAGE, AND HANDLING
(a) Delivery: Deliver materials to site in manufacturer's original, unopened containers and
(b) packaging, with labels clearly identifying product name and manufacturer.
(c) Playground Safety Surfacing Tiles: Store tiles in a dry area prior to installation and protect tiles from dust (or other contaminants) and direct sunlight before installation.
(d) Adhesive: Store adhesive in a dry area at a minimum temperature of 40°F. Avoid adhesive applications below 40°F and above 105°F.
(e) Handling: Protect materials during handling and installation to prevent damage.
1.7 WARRANTY
(a) Materials and workmanship: manufacturer shall provide a full, non-prorated warranty (minimum 6 years from date of Final Acceptance) for defects in materials and workmanship in accordance with manufacturer’s warranty documentation.
2. PART 2 – PRODUCTS
2.1 MANUFACTURERS
(a) Matta, LLC 24305 Prielipp Rd, Ste. 104, Wildomar CA 92595, USA. Website:
www.mattaproducts.com. Email. sales@mattaproducts.com. Phone. (888) 346 2882
2.2 PLAYGROUND SURFACING SYSTEM MATERIALS
(a) Surfacing System: Play Matta™ Original (Multiple System)
(i) Wear Layer: Play Matta™ Original Tile / Safety Matta Grass Retention Tile (All Systems)
(1) Description: Resilient, playground safety surfacing tiles.
(2) Compliance: Meet and exceed CPSC guidelines for impact attenuation.
(3) Material: Injection-molded virgin PVC.
(4) Tile Locking: 0.75 inch 9 lug interlocking configuration on all 4 sides for locking with adjacent tiles.
(5) Top Edges: 90 degree rebate groove located around all for top sides of tiles to receive 4-6mm PVC weld rod for hot air welding procedure.
(6) Tile Bottom: 145 hollow compression columns per tile.
(7) Manufactured Size: 19.75” x 19.75” (+/- .25”) (excluding lugs)
(8) Thickness: 1 inch (1 ft critical fall height)
(9) Weight: 5.7 lbs
(10) Colors (100% through tile):
http://www.mattaproducts.com/ mailto:sales@mattaproducts.com
A. Standard Color Range: Light Gray, Mid Gray, Dark Gray, Light Blue, Mid Blue, Dark Blue, Light Green, Mid Green, Dark Green, Light Brown, Mid Brown, Black
B. Bright Colour Range: Red, Orange, Yellow, Bright Green, Bright Blue, Purple, White.
(b) Attenuation Layer: Play Matta PP-25PS, PP-45PS, PP-F35, PP-F55 Rubber and Foam Shock Pads
(i) Description: Resilient, playground safety surfacing shock pad
(ii) Compliance: Meet and exceed CPSC guidelines for impact attenuation.
(iii) Material:
(1) PP-F35 / PP-F55 / PP-25PS / PP-45PS Shock Pads: closed-cell crosslinked polyethylene foam.
(iv) Manufactured dimensions:
(1) PP-F35 / PP-F55 / PP-25PS / PP-45PS Shock Pads: 35.5 x 88.5 inches.
(v) Manufactured Thickness
(1) PP-F35 Shock Pad: 1.38 inches
(2) PP -F55 Shock Pad: 2.17 inches
(3) PP-25PS – 1.06 inches
(4) PP-45PS – 1.85 inches
(vi) Manufactured Weights:
(1) PP-F35 Shock Pad: 16 pounds
(2) PP-F55 Shock Pad: 23 pounds
(3) PP-25PS – 12 pounds
(4) PP-45PS – 14 pounds
(vii) Summary System Critical Fall Heights (PP-F35 and PP-F55 Foam Shock Pads)
(1) Play Matta F35 System (Tile + PP-F35 Shock pad): 2.4” thick – 5’ CFH
(2) Play Matta F55 System (Tile + PP-F55 Shock pad): 3.15” thick – 7’ CFH
(3) Play Matta F70 System (Tile + 2 x PP-F35 Shock pad): 3.75” thick – 8’ CFH
(4) Play Matta F90 System (Tile + PP-F35 + PP-F55 Shock pad): 4.5” thick – 9’ CFH
(5) Play Matta F110 System (Tile + 2 x PP-F55 shock pads): 5.3” thick – 10’ CFH
(c) Testing Results
(i) Impact Attenuation: ASTM F 1292 - Pass
(ii) Flammability: Burning Pill, ASTM D 2859: Pass
(iii) Accessibility: Determination of Accessibility, ASTM F 1951: Meets/Exceeds requirements
2.3 ACCESSORIES
Note: all approved and furnished by manufacturer
(a) Corners (Black):
(i) Pre-fabricated Interlocking Inside and Outside Corner Ramp.
(ii) Material: Same as playground safety surfacing tiles
(b) Ramps (Black):
(i) Interlocking Ramps:
(ii) Material: same as playground safety
(iii) Prefabricated ADA-Compliant Ramps:
(iv) Material: Same as playground safety surfacing tiles plus recycled rubber buffings
(c) T / U Channel
(i) Material: PVC
(d) Adhesive
(i) Matta-fix/Bostik Unigrip 8400
(e) Welding Rod
(i) Material: Same as playground safety surfacing tiles
(f) Fixing Pins:
(i) Material: Nylon feathered pins
(g) Geotextile / Oyster Mesh
(i) Mirafi FW402 / Polyethylene 2M x 30M / 9mm
(h) Skimming / Buffing
(i) Recycled rubber and bonding agents.
(i) Post rings
(i) Material: PVC
3. PART 3 – EXECUTION
3.1 EXAMINATION
(a) Examine areas to receive playground safety surfacing tiles. Notify responsible parties if areas are not acceptable or otherwise unable to receive playground safety surfacing tiles in accordance with manufacturer’s instructions. Do not begin installation until unacceptable conditions have been corrected.
3.2 PREPARATION
(a) Prepare subsurface in accordance with manufacturer’s instructions to ensure proper slope, support and drainage for playground safety surfacing tiles.
(b) Aggregate subsurface: Aggregate sub base shall be installed in accordance with Section 32 18
16.13 ( 3.1.8 )
(c) Correct subgrade irregularities to ensure proper thickness for fall height is provided
(i) Ensure sub base is compacted to a maximum of 95% minimum of 90% as per ASTM D1557
(ii) Ensure a minimum of 4” aggregate depth for proper performance
(d) Concrete Subsurface: Concrete Subsurface shall be installed in accordance with Section 32 18
16.13 ( 3.1.9 )
(i) Concrete shall be as specified
(ii) Apply Light Broom Finish
(iii) Ensure concrete is stable with no loose particles or cracks
(iv) Ensure Concrete is clean and dry before installing matting
(e) Asphalt Subsurface: Concrete Subsurface shall be installed in accordance with Section 32 18
16.13 ( 3.1.9 )
(i) Asphalt subsurface shall be as specified
(ii) Ensure asphalt is sound with no loose particles or cracked
(iii) Compacted aggregate can be sued to patch holes installed in accordance with above aggregate recommendations
(f) Border Nailer / Attachment Points:
(i) Consult Manufacturer for pinning and border recommendations
(ii) Ensure nailer and attachment points are outside of use zones and installed as per manufacture site plan
3.3 INSTALLATION
(a) Installation of “interlocking heat welded tile system” in accordance with manufacturers recommendations
(b) Installation to be completed by manufacturer certified installer
3.4 CLEANING
(a) Clean surface in accordance with Manufacturers ongoing maintenance instruction
3.5 PROTECTION
(a) Protect playground matting from damage during construction by surrounding trades and vehicle
(b) Ongoing motoring of vehicle traffic over matting is advised
END OF SECTION
| 1. PART 1 – GENERAL |
| 1.1 SECTION INCLUDES |
| (a) Resilient, Multi-Layered Interlocking, Playground Safety Surfacing Tiles. |
| 1.2 REFERENCES |
| (a) The following standards and definitions are applicable to the work of this Section to the extent referenced herein: |
| (i) ASTM F 1951-14 – Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment |
| (ii) ASTM F 1292-18E1 – Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment |
| (iii) ASTM E303 - Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester |
| (iv) ASTM D2859 – Ignition Characteristic Of Finished Textile Floor Coverings |
| (v) US Consumer Product Safety Commission (CPSC) Handbook for Playground Safety |
| (vi) IPEMA Certified for ASTM F1292-22 |
| 1.3 SAMPLES AND SUBMITTALS |
| (a) Comply with Submittal Procedures - Section 01330 (01 33 00) |
| (b) Product Data: Submit manufacturer’s product data for the following components and all installation and/or subsurface recommendations: |
| (i) Colored top mat |
| (ii) UV stabilized geotextile fabric |
| (iii) Edge Piece |
| (iv) Shock pad |
| (v) Oyster Mesh |
| (c) Samples: Submit manufacturer provided sample box (which will include tile, geotextile fabric and shock pad samples) |
| (d) Test Reports: Are available on request |
| (e) Installation and Maintenance: |
| (i) Submit certified installation certificate issued by manufacturer |
| (ii) Submit manufacturer’s maintenance and cleaning instructions |
| (f) Certificate of Compliance: Submit manufacturer's certificate of compliance indicating materials comply with specified requirements. |
| (g) Warranty Statement: Submit manufacturer’s standard warranty. |
| 1.4 PROJECT/SITE CONDITIONS |
| (a) Atmospheric temperature is above 40 F for a minimum of 24hours before and during installation, preferably climbing. |
| (b) Tile and Air Temperature: Consult manufacturer’s installation instructions for all installations procedure when tile or air temperatures are above 90 degrees F. |
| 1.5 QUALITY ASSURANCE |
| (a) Manufacturer Qualification: Manufacturer shall meet the following 2 requirements: |
| (i) Playground safety surfacing tiles manufactured in accordance with ISO 9001 (Quality) and ISO 45001 (Health and Safety) |
| (ii) Manufacturer to have minimum of 20 years experience in manufacturing playground safety surfacing. |
(b) Installer Qualifications: Employ persons trained for installation of playground safety surfacing tiles and who hold current manufacturer issued Certified Installer certificate.
| 1.6 DELIVERY, STORAGE, AND HANDLING |
| (a) Delivery: Deliver materials to site in manufacturer's original, unopened containers and |
| (b) packaging, with labels clearly identifying product name and manufacturer. |
| (c) Playground Safety Surfacing Tiles: Store tiles in a dry area prior to installation and protect tiles from dust (or other contaminants) and direct sunlight before installation. |
| (d) Adhesive: Store adhesive in a dry area at a minimum temperature of 40 F. Avoid adhesive applications below 40 F and above 105 F. |
| (e) Handling: Protect materials during handling and installation to prevent damage. |
| 1.7 WARRANTY |
| (a) Materials and workmanship: manufacturer shall provide a full, non-prorated warranty (minimum 6 years from date of Final Acceptance) for defects in materials and workmanship in accordance with manufacturer’s warranty documentation. |
| 2. PART 2 – PRODUCTS |
| 2.1 MANUFACTURERS |
| (a) Matta, LLC 24305 Prielipp Rd, Ste. 104, Wildomar CA 92595, USA. Website: www.mattaproducts.com. Email. sales@mattaproducts.com. Phone. (888) 346 2882 |
| 2.2 PLAYGROUND SURFACING SYSTEM MATERIALS |
| (a) Surfacing System: Play Matta™ Original (Multiple System) |
| (i) Wear Layer: Play Matta™ Original Tile / Safety Matta Grass Retention Tile (All Systems) |
| (1) Description: Resilient, playground safety surfacing tiles. |
| (2) Compliance: Meet and exceed CPSC guidelines for impact attenuation. |
| (3) Material: Injection-molded virgin PVC. |
| (4) Tile Locking: 0.75 inch 9 lug interlocking configuration on all 4 sides for locking with adjacent tiles. |
| (5) Top Edges: 90 degree rebate groove located around all for top sides of tiles to receive 4-6mm PVC weld rod for hot air welding procedure. |
| (6) Tile Bottom: 145 hollow compression columns per tile. |
| (7) Manufactured Size: 19.75” x 19.75” (+/- .25”) (excluding lugs) |
| (8) Thickness: 1 inch (1 ft critical fall height) |
| (9) Weight: 5.7 lbs |
| (10) Colors (100% through tile): |
| A. Standard Color Range: Light Gray, Mid Gray, Dark Gray, Light Blue, Mid Blue, Dark Blue, Light Green, Mid Green, Dark Green, Light Brown, Mid Brown, Black |
| B. Bright Colour Range: Red, Orange, Yellow, Bright Green, Bright Blue, Purple, White. |
| (b) Attenuation Layer: Play Matta PP-25PS, PP-45PS, PP-F35, PP-F55 Rubber and Foam Shock Pads |
| (i) Description: Resilient, playground safety surfacing shock pad |
| (ii) Compliance: Meet and exceed CPSC guidelines for impact attenuation. |
| (iii) Material: |
| (1) PP-F35 / PP-F55 / PP-25PS / PP-45PS Shock Pads: closed-cell crosslinked polyethylene foam. |
| (iv) Manufactured dimensions: |
| (1) PP-F35 / PP-F55 / PP-25PS / PP-45PS Shock Pads: 35.5 x 88.5 inches. |
| (v) Manufactured Thickness |
| (1) PP-F35 Shock Pad: 1.38 inches |
| (2) PP -F55 Shock Pad: 2.17 inches |
| (3) PP-25PS – 1.06 inches |
| (4) PP-45PS – 1.85 inches |
| (vi) Manufactured Weights: |
| (1) PP-F35 Shock Pad: 16 pounds |
| (2) PP-F55 Shock Pad: 23 pounds |
| (3) PP-25PS – 12 pounds |
| (4) PP-45PS – 14 pounds |
| (vii) Summary System Critical Fall Heights (PP-F35 and PP-F55 Foam Shock Pads) |
| (1) Play Matta F35 System (Tile + PP-F35 Shock pad): 2.4” thick – 5’ CFH |
| (2) Play Matta F55 System (Tile + PP-F55 Shock pad): 3.15” thick – 7’ CFH |
| (3) Play Matta F70 System (Tile + 2 x PP-F35 Shock pad): 3.75” thick – 8’ CFH |
| (4) Play Matta F90 System (Tile + PP-F35 + PP-F55 Shock pad): 4.5” thick – 9’ CFH |
| (5) Play Matta F110 System (Tile + 2 x PP-F55 shock pads): 5.3” thick – 10’ CFH |
| (c) Testing Results |
| (i) Impact Attenuation: ASTM F 1292 - Pass |
| (ii) Flammability: Burning Pill, ASTM D 2859: Pass |
| (iii) Accessibility: Determination of Accessibility, ASTM F 1951: Meets/Exceeds requirements |
| 2.3 ACCESSORIES |
| (a) Corners (Black): |
| (i) Pre-fabricated Interlocking Inside and Outside Corner Ramp. |
| (ii) Material: Same as playground safety surfacing tiles |
| (b) Ramps (Black): |
| (i) Interlocking Ramps: |
| (ii) Material: same as playground safety |
| (iii) Prefabricated ADA-Compliant Ramps: |
| (iv) Material: Same as playground safety surfacing tiles plus recycled rubber buffings |
| (c) T / U Channel |
| (i) Material: PVC |
| (d) Adhesive |
| (i) Matta-fix/Bostik Unigrip 8400 |
| (e) Welding Rod |
| (i) Material: Same as playground safety surfacing tiles |
| (f) Fixing Pins: |
| (i) Material: Nylon feathered pins |
| (g) Geotextile / Oyster Mesh |
| (i) Mirafi FW402 / Polyethylene 2M x 30M / 9mm |
| (h) Skimming / Buffing |
| (i) Recycled rubber and bonding agents. |
| (i) Post rings |
| (i) Material: PVC |
| 3. PART 3 – EXECUTION |
| 3.1 EXAMINATION |
| (a) Examine areas to receive playground safety surfacing tiles. Notify responsible parties if areas are not acceptable or otherwise unable to receive playground safety surfacing tiles in accordance with manufacturer’s instructions. Do not begin insta... |
| 3.2 PREPARATION |
| (a) Prepare subsurface in accordance with manufacturer’s instructions to ensure proper slope, support and drainage for playground safety surfacing tiles. |
| (b) Aggregate subsurface: Aggregate sub base shall be installed in accordance with Section 32 18 16.13 ( 3.1.8 ) |
| (c) Correct subgrade irregularities to ensure proper thickness for fall height is provided |
| (i) Ensure sub base is compacted to a maximum of 95% minimum of 90% as per ASTM D1557 |
| (ii) Ensure a minimum of 4” aggregate depth for proper performance |
| (d) Concrete Subsurface: Concrete Subsurface shall be installed in accordance with Section 32 18 16.13 ( 3.1.9 ) |
| (i) Concrete shall be as specified |
| (ii) Apply Light Broom Finish |
| (iii) Ensure concrete is stable with no loose particles or cracks |
| (iv) Ensure Concrete is clean and dry before installing matting |
| (e) Asphalt Subsurface: Concrete Subsurface shall be installed in accordance with Section 32 18 16.13 ( 3.1.9 ) |
| (i) Asphalt subsurface shall be as specified |
| (ii) Ensure asphalt is sound with no loose particles or cracked |
| (iii) Compacted aggregate can be sued to patch holes installed in accordance with above aggregate recommendations |
| (f) Border Nailer / Attachment Points: |
| (i) Consult Manufacturer for pinning and border recommendations |
| (ii) Ensure nailer and attachment points are outside of use zones and installed as per manufacture site plan |
| 3.3 INSTALLATION |
| (a) Installation of “interlocking heat welded tile system” in accordance with manufacturers recommendations |
| (b) Installation to be completed by manufacturer certified installer |
| 3.4 CLEANING |
| (a) Clean surface in accordance with Manufacturers ongoing maintenance instruction |
| 3.5 PROTECTION |
| (a) Protect playground matting from damage during construction by surrounding trades and vehicle |
| (b) Ongoing motoring of vehicle traffic over matting is advised |
| D5206_Playmatta A or B sys Concrete Border to Wall-Page 1.pdf |
| Sheets and Views |
| Page 1 |
| D4213_Play Matta System New Concrete Border (Inground) - Oct 2024 Update.pdf |
| Sheets and Views |
| D4213 (Rev 7) |
File details come from the government source that posted it. Updated .