SPMYM1-21-Q-0022-0001.pdf

DLA MARITIME NORFOLK

AMANDA SPENN, CODE NMAB.R3

PORTSMOUTH VA 23709-5000

N421580319JITP

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

I. This amendment is being issued for the reasons specif ied in the attachment titled "Changes Page_2 MAR 2021". All other terms and conditions remain the same and unchanged. The solicitation closing date and time remain unchanged.

II. See the follow ing pages

1. CONTRACT ID CODE PAGE OF PAGES

K 1 72

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 02-Mar-2021

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X SPMYM121Q0022

X 9B. DATED (SEE ITEM 11)

19-Feb-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

02-Mar-2021

CODE

DLA MARITIME NORFOLK

CONTRACTING DIVISION (DLA-NMAB)

BLDG. 1500, 2ND FLOOR

PORTSMOUTH VA 23709-5000

SPMYM1 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE SPMYM1

FACILITY CODECODE

EMAIL:TEL:

SPMYM121Q0022

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

SUBCLIN 0008AA

The CLIN extended description has changed from:

WEATHER-RESISTANT, EXTERIOR USE COATING1 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 17038COLOR: DARK BLACK, GLOSS

To:

WEATHER-RESISTANT, EXTERIOR USE COATING1 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 17038COLOR: DARK BLACK, SUBCLIN 0008AB

WEATHER-RESISTANT, EXTERIOR USE COATING1 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 11105COLOR: RED (STRIPPING)

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

SUBCLIN 0008AC

WEATHER-RESISTANT, EXTERIOR USE COATING1 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 14062COLOR: DARK (HUNTER)

GREEN (STRIPPING), HIGH GLOSS

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 14062COLOR: DARK (HUNTER)

SUBCLIN 0008AD

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 15123COLOR: BLUE STRIPPING, WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 15123COLOR: BLUE STRIPPING, SUBCLIN 0008AE

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 13655COLOR: LIGHT

(SIGNAL)YELLOW, GLOSS

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 13655COLOR: LIGHT

SUBCLIN 0008AF

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 11105COLOR: RED (STRIPPING), ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II, CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 11105COLOR: RED (STRIPPING), SUBCLIN 0008AG

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 13538COLOR: BRILLIANT

YELLOW (ORANGE-YELLOW), GLOSS

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

SUBCLIN 0008AH

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 12197COLOR: SAFETY/VIVID

(BLAZE) ORANGE, GLOSS

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 12197COLOR: SAFETY/VIVID

SUBCLIN 0008AJ

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 10080COLOR: BROWN, GLOSS

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

SUBCLIN 0008AK

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 17043COLOR: GOLD, GLOSS

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

SUBCLIN 0008AL

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

GREEN (STRIPPING), GLOSS

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 14062COLOR: DARK (HUNTER)

SUBCLIN 0008AM

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 11120COLOR: SAFETY

(SIGNAL) RED, GLOSS

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 11120COLOR: SAFETY

SUBCLIN 0008AN

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 17038COLOR: DARK BLACK, SUBCLIN 0008AP

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

CLASS 1, GRADE AMAX VOC: 250 g/LFED-STD-595B: 17925COLOR: BRIGHT

(UNTINTED) WHITE, GLOSS

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 250 g/LFED-STD-595B: 17925COLOR: BRIGHT

SUBCLIN 0008AQ

CLASS 1, GRADE AMAX VOC: 250 g/LFED-STD-595B: 17886COLOR: BONE (OFF)

WHITE, GLOSS

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 250 g/LFED-STD-595B: 17886COLOR: BONE (OFF)

SUBCLIN 0008AR

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

CLASS 1, GRADE AMAX VOC: 250 g/LFED-STD-595B: 17875COLOR: INSIGNIA WHITE, ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II, CLASS 1, GRADE AMAX VOC: 250 g/LFED-STD-595B: 17875COLOR: INSIGNIA WHITE, SUBCLIN 0008AS

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE III,

CLASS 2, GRADE AMAX VOC: 250 g/LFED-STD-595B: 26231COLOR: DECK GRAY, SEMI-GLOSS

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE III,

SUBCLIN 0008AT

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE III,

CLASS 2, GRADE AMAX VOC: 250 g/LFED-STD-595B: 26307COLOR: BULKHEAD (NO.

30)/EQUIP/ MACH. GRAY, SEMI-GLOSS

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE III,

CLASS 2, GRADE AMAX VOC: 250 g/LFED-STD-595B: 26307COLOR: BULKHEAD (NO.

SUBCLIN 0008AU

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 2, GRADE AMAX VOC: 250 g/LFED-STD-595B: 26307COLOR: BULKHEAD (NO.

SUBCLIN 0008AW

CLASS 2, GRADE AMAX VOC: 250 g/LFED-STD-595B: 27038COLOR: DULL BLACK

(STRIPPING), SEMI-GLOSS

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 2, GRADE AMAX VOC: 250 g/LFED-STD-595B: 27038COLOR: DULL BLACK

SUBCLIN 0008AX

WEATHER-RESISTANT, EXTERIOR USE COATING1 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

24635E, TYPE III, CLASS 2, GRADE CMAX VOC: 250 g/LFED-STD-595B: 26270COLOR:

HAZE GRAY (NO. 27), SEMI-GLOSS

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

24635F, TYPE III, CLASS 2, GRADE BMAX VOC: 250 g/LFED-STD-595B: 26270COLOR:

SUBCLIN 0008AY

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

24635E, TYPE III, CLASS 2, GRADE CMAX VOC: 250 g/LFED-STD-595B: 26008COLOR:

DARK DECK GRAY (NO. 20), SEMI-GLOSS

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

24635F, TYPE III, CLASS 2, GRADE BMAX VOC: 250 g/LFED-STD-595B: 26008COLOR:

SUBCLIN 0008AZ

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

24635F, TYPE III, CLASS 2, GRADE BMAX VOC: 250 g/LFED-STD-595B: 26270COLOR:

SUBCLIN 0026AA

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

PAINT IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE V OR VIMAX VOC: TY-V <

250 g/L, TY-VI < 100 g/LCOLOR: BLACK, GLOSS

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 0026AB

250 g/L, TY-VI < 100 g/LCOLOR: WHITE, GLOSS

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 0026AC

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

250 g/L, TY-VI < 100 g/LCOLOR: YELLOW, GLOSS

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 0026AD

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

250 g/L, TY-VI < 100 g/LCOLOR: RED, GLOSS

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 0026AE

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

250 g/L, TY-VI < 100 g/LCOLOR: BLUE, GLOSS

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 0026AF

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON KITANCHOR CHAIN

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON KITANCHOR CHAIN

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 0027AA

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

595B: 26270COLOR: HAZE GRAY (NO. 27), SEMI-GLOSS

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 0027AB

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

595B: 26008COLOR: DARK GRAY (NO. 20), SEMI-GLOSS

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 0027AC

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

595B: 26173COLOR: OCEAN (DARK) GRAY (NO. 17), SEMI-GLOSS

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 0027AD

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

595B: 26373COLOR: LIGHT GRAY, SEMI-GLOSS

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 0027AE

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 0027AF

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 1008AA

WEATHER-RESISTANT, EXTERIOR USE COATING1 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 17038COLOR: DARK BLACK, SUBCLIN 1008AB

WEATHER-RESISTANT, EXTERIOR USE COATING1 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

SUBCLIN 1008AC

WEATHER-RESISTANT, EXTERIOR USE COATING1 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 14062COLOR: DARK (HUNTER)

SUBCLIN 1008AD

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 15123COLOR: BLUE STRIPPING, SUBCLIN 1008AE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 13655COLOR: LIGHT

SUBCLIN 1008AF

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 11105COLOR: RED (STRIPPING), SUBCLIN 1008AG

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

SUBCLIN 1008AH

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 12197COLOR: SAFETY/VIVID

SUBCLIN 1008AJ

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

SUBCLIN 1008AK

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

SUBCLIN 1008AL

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 14062COLOR: DARK (HUNTER)

SUBCLIN 1008AM

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

SUBCLIN 1008AN

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 17038COLOR: DARK BLACK, SUBCLIN 1008AP

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 250 g/LFED-STD-595B: 17925COLOR: BRIGHT

SUBCLIN 1008AQ

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 250 g/LFED-STD-595B: 17886COLOR: BONE (OFF)

SUBCLIN 1008AR

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 250 g/LFED-STD-595B: 17875COLOR: INSIGNIA WHITE, SUBCLIN 1008AS

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE III,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE III,

CLASS 2, GRADE AMAX VOC: 250 g/LFED-STD-595B: 26231COLOR: DECK GRAY, SUBCLIN 1008AT

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE III,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE III,

CLASS 2, GRADE AMAX VOC: 250 g/LFED-STD-595B: 26307COLOR: BULKHEAD (NO.

SUBCLIN 1008AU

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 2, GRADE AMAX VOC: 250 g/LFED-STD-595B: 26307COLOR: BULKHEAD (NO.

SUBCLIN 1008AW

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 2, GRADE AMAX VOC: 250 g/LFED-STD-595B: 27038COLOR: DULL BLACK

SUBCLIN 1008AX

WEATHER-RESISTANT, EXTERIOR USE COATING1 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

24635F, TYPE III, CLASS 2, GRADE BMAX VOC: 250 g/LFED-STD-595B: 26270COLOR:

SUBCLIN 1008AY

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

24635F, TYPE III, CLASS 2, GRADE BMAX VOC: 250 g/LFED-STD-595B: 26008COLOR:

SUBCLIN 1008AZ

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

24635F, TYPE III, CLASS 2, GRADE BMAX VOC: 250 g/LFED-STD-595B: 26270COLOR:

SUBCLIN 1026AA

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 1026AB

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 1026AC

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 1026AD

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

SUBCLIN 1026AE

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 1026AF

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON KITANCHOR CHAIN

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 1027AA

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 1027AB

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 1027AC

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

SUBCLIN 1027AD

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 1027AE

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 1027AF

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 2008AA

WEATHER-RESISTANT, EXTERIOR USE COATING1 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 17038COLOR: DARK BLACK, SUBCLIN 2008AB

WEATHER-RESISTANT, EXTERIOR USE COATING1 GALLON CANGEN PURPOSE

SUBCLIN 2008AC

WEATHER-RESISTANT, EXTERIOR USE COATING1 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 14062COLOR: DARK (HUNTER)

SUBCLIN 2008AD

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 15123COLOR: BLUE STRIPPING, SUBCLIN 2008AE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 13655COLOR: LIGHT

SUBCLIN 2008AF

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 11105COLOR: RED (STRIPPING), SUBCLIN 2008AG

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 13538COLOR: BRILLIANT

SUBCLIN 2008AH

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 12197COLOR: SAFETY/VIVID

SUBCLIN 2008AJ

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

SUBCLIN 2008AK

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

SUBCLIN 2008AL

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 14062COLOR: DARK (HUNTER)

SUBCLIN 2008AM

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 11120COLOR: SAFETY

SUBCLIN 2008AN

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 340 g/LFED-STD-595B: 17038COLOR: DARK BLACK, SUBCLIN 2008AP

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 250 g/LFED-STD-595B: 17925COLOR: BRIGHT

SUBCLIN 2008AQ

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 250 g/LFED-STD-595B: 17886COLOR: BONE (OFF)

SUBCLIN 2008AR

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 1, GRADE AMAX VOC: 250 g/LFED-STD-595B: 17875COLOR: INSIGNIA WHITE, SUBCLIN 2008AS

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE III,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE III,

CLASS 2, GRADE AMAX VOC: 250 g/LFED-STD-595B: 26231COLOR: DECK GRAY, SUBCLIN 2008AT

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE III,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE III,

CLASS 2, GRADE AMAX VOC: 250 g/LFED-STD-595B: 26307COLOR: BULKHEAD (NO.

SUBCLIN 2008AU

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

SUBCLIN 2008AW

WEATHER-RESISTANT, EXTERIOR USE COATING1 QUART CANGEN PURPOSE

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE II,

ENAMEL, SILICONE ALKYD IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE II,

CLASS 2, GRADE AMAX VOC: 250 g/LFED-STD-595B: 27038COLOR: DULL BLACK

SUBCLIN 2008AX

WEATHER-RESISTANT, EXTERIOR USE COATING1 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

24635F, TYPE III, CLASS 2, GRADE BMAX VOC: 250 g/LFED-STD-595B: 26270COLOR:

SUBCLIN 2008AY

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

24635F, TYPE III, CLASS 2, GRADE BMAX VOC: 250 g/LFED-STD-595B: 26008COLOR:

SUBCLIN 2008AZ

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANGEN PURPOSE

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

ENAMEL, SILICONE ALKYD, LSA, ANTI-STAIN IN ACCORDANCE WITH: MIL-PRF-

24635F, TYPE III, CLASS 2, GRADE BMAX VOC: 250 g/LFED-STD-595B: 26270COLOR:

SUBCLIN 2026AA

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

SUBCLIN 2026AB

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 2026AC

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 2026AD

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 2026AE

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON KITANCHOR CHAIN

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 2026AF

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON KITANCHOR CHAIN

PAINT IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VIMAX VOC: TY-V <

SUBCLIN 2027AA

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 2027AB

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 2027AC

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 2027AD

WEATHER-RESISTANT, EXTERIOR USE COATING1.25 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 2027AE

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANHIGH-

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE

DURABILITY POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE

V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-

SUBCLIN 2027AF

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANHIGH-DURABILITY

POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635E, TYPE V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-595B: 26008COLOR: DARK GRAY (NO. 20), SEMI-

WEATHER-RESISTANT, EXTERIOR USE COATING5 GALLON CANHIGH-DURABILITY

POLYSILOXANE, LSA IN ACCORDANCE WITH: MIL-PRF-24635F, TYPE V OR VI, CLASS 2, GRADE BMAX VOC: TY-V < 250 g/L, TY-VI < 100 g/LFED-STD-595B: 26008COLOR: DARK GRAY (NO. 20), SEMI-

The following have been modified:

REQUIREMENT SPECIFICATIONS

Simplified Acquisition Procedures are being utilized as authorized under FAR Subpart 13.5, Simplified Procedures for Certain Commercial Items

STATEMENT OF WORK AND SPECIFICATIONS

SCOPE

Defense Logistics Agency (DLA) Maritime Norfolk is seeking to establish a Firm Fixed Price Requirements-Type contract to provide direct delivery of marine paint approved for Navy shipboard use, delivered Just-In-Time (JIT).

The Government reserves the right to add marine paint and coatings approved for Navy Shipboard use in the future if determined to be in the Government's best interest. Items added are subject to Competition in Contracting Act (CICA) requirements and these will only be applied if they are within the scope of the contract. Should the Government be unable to determine pricing for an item fair and reasonable, the Government reserves the right to procure outside of the JIT Marine Paint and Coatings Contract.

BACKGROUND / INTENT

This procurement will utilize the Direct Vendor Delivery (DVD) program to improve supply system service to the customers while reducing the cost of supply system operations. Compared to traditional stock contracts; DVD contracts improve materiel availability, decrease backorders, and speed up the purchasing process.

The required delivery date (RDD) for the marine coatings is no later than 72-hours after a “release order” is placed.

In the JIT delivery process, the three (3) Naval Shipyards, Norfolk Naval Shipyard (NNSY), Pearl Harbor Naval Shipyard (PHNSY), and Portsmouth Naval Shipyard (PNSY), develop forecasts of the marine coatings needed and communicate these requirements to the contractor through delivery orders issued at least quarterly.

This improved logistics support will take place by seeking innovative, state of the art private sector companies who focus on customer satisfaction as their primary measurement of success. DLA Maritime Norfolk is seeking to improve the availability, quality, and delivery times of commercially available commodities to our customers. The ultimate effect is to support our customers more efficiently while saving taxpayer dollars by reducing the supply system infrastructure.

Applicable Documents The latest revisions of the enclosed documents form a part of the resultant, including modifications or exclusions, to the extent specified herein and must be obtained by the Contractor.

Period of Performance The Government anticipates the period of performance for the base period will be for 12-months/1-year beginning after contract award, with two 12-month/1-year option periods.

Forecasts Delivery orders providing the forecasted demand per quarter are strictly forecasts. In the event the forecasted demand is not purchased in full by the end of the year, the Government is not required to purchase the remaining balance. It is the Contractor's responsibility to exercise efficient inventory management in order to support the just in time delivery requirements. See reference FAR 52.216-21, REQUIREMENTS (OCT 1995).

MATERIAL REQUIREMENTS

Product Performance Requirements Products furnished under this contract shall comply with all contract and specification requirements. The Government’s technical data requirements consist of the following:

a) Safety Data Sheets (SDS), Form OSHA-HCS, FED-STD-313

b) ASTM F 718 data sheet of record, approved by Naval Sea Systems Command (NAVSEA) 05M

c) Manufacturer Technical/Product Data Sheets

d) Certification that the offeror is or is not the actual manufacturer of the item(s) covered by this solicitation/resultant contract. For offerors who are not the manufacturers of proposed products, the following information is to be provided:

1. Actual Manufacturer(s) Identification [if more than one, identify all]: Name and Address, Actual Manufacturer’s Part Number or other identification.

2. Support effort performed by the respondent in addition to purchasing the item(s) for resale to the Government:

Testing/Quality Assurance: Yes/No Preservation, Packaging, and Packing: Yes/No Bar Coding Yes/No Other _____________________________________________

e) Certification of NAVSEA approval

Color All colors under this contract shall match a color standard under FED-STD-595C; except R0 color paints. Colors not specified per FED-STD-595C shall match to a military specification (MIL-SPEC) or standard agreed upon by the Government and the Contractor. The Contractor shall furnish any color and gloss specified in the applicable Military Specification (MIL-SPEC), NSTM Chapter 631, SMS 6310-081-015, and NAVSEA Standard Item 009-32. All items under any resulting contract(s) shall be uniformly proposed based on volume (i.e., regardless of container size or color).

Solvents The Contractor shall provide manufacturer recommended compatible solvents for thinning (as allowed), and / or cleaning purposes for all proprietary products under this contract.

Shelf Life All products furnished under this contract shall have not less than 50 percent (50%) of shelf-life remaining at the time of delivery of product on activity based on the manufacturer’s product expiration date in accordance with DOD

4140.27 for Type II material. Any delivery from the Contractor not having at least 50 percent (50%) shelf-life remaining shall normally be considered non-conforming with the exception of emergent or expedited request. The Government can waive the 50 percent rule to meet emergent needs. Shelf-life material received without the required shelf-life markings is unacceptable.

Once a product reaches 60 percent shelf-life remaining, the contractor shall notify the respective JIT Item Manager at each Shipyard location. Each Shipyard’s Point of Contact will be identified upon contract award.

NESHAP Requirements All materials provided shall comply with EPA NESHAP, 40 CFR Part 63 – Table 2 of Subpart II, Volatile Organic Hazardous Air Pollutants (VOHAP) Limits for Marine Coatings, and shall be shipped to the Government per Section D. Conformance to a Military Specification (MIL-Spec) is acceptable as long as it relates to a specific NESHAP Category.

For each proposed product, the contractor shall provide a Statement of Volatiles Organic Compounds (VOC) Certificate of Conformance, as follows:

“For [named] product, respondent affirms the establishment of sound and consistent quality control procedures in batch formulation and manufacturing processes, which prevent significant batch to batch variation in product VOC content. The product VOC value presented in this paragraph has a consistent and quantitatively known relationship to the EPA Method 24 result that would be obtained by testing a sample from any quality control approved production batch of this product. Based on the quality control procedures affirmed above, respondent certifies that any batch of this product, if tested by analytical test Method 24 of Appendix A of 40 CFR Part 60, will not exceed a VOC content of [product VOC value] grams/liter - when used in accordance with manufacturer instructions.”

In the event, customer orders a multi-component product, VOC Certificate of Conformance shall include batch numbers for all components.

Target Chemical Minimization. For each proposed product, the contractor shall provide Percentage (by weight) of the following target chemicals present:

a. Benzene, Beryllium and Beryllium Compounds, Cadmium and Cadmium Compounds, Carbon Tetrachloride, Chromium and Chromium Compounds, Ethylene Glycol, Lead and Lead Compounds, Mercury and Mercury Compounds, Methyl Chloroform (1,1,1-Trichloroethane), N-Butyl Alcohol, Methyl Ethyl Ketone, Methylene Chloride (Dichloromethane), Toluene, Trichlorotrifluoroethane (CFC-113), Xylene, Zinc Chromate.

b. Provide a narrative description of how the overall suite of products proposed supports the general objective of minimizing the overall usage of NAVSEA targeted chemicals, as described in a letter from the Naval Sea Systems Command (NAVSEA), dated 26 November 2008, tasking all Naval Shipyards to reduce or eliminate the use of all chemicals listed in section 1.3(a) above.

Product Exceptions The Contractor shall state any exceptions to the Government’s requirements by citing the requirement and explaining precisely how the proposed item differs from the requirement described by the specifications in the solicitation.

Note: Unless “No Exceptions” is indicated in the item description, a contractor may submit a product exception. A line item exception may be determined unacceptable if it is not in the Government’s best interest at the time of evaluation.

SERVICE REQUIRMENTS

JIT Process Overview In the JIT delivery process, the Shipyard develops forecasts of its Maritime Coatings needs and communicates these requirements to the contractor through delivery orders issued at least quarterly. The Contractor shall manufacture and store coatings to meet the Shipyards’ needs indicated in these forecasts. Once manufactured coatings have been shipped to the contractor’s storage facility, the Contractor shall provide samples of production batches to the Shipyard for testing prior to delivery. Once a batch is tested and shown to be in compliance, the supplier is expected to store product in such a manner as to be able to deliver “release orders” against these quantities within 72-hours, although an expedited time of 24-hours may be required. The Navy must have access to inspect the supplier warehouse at any time to ensure storage conditions do not compromise the integrity of the material.

Ordering Requirements The Government shall provide the contractor demand forecast delivery order data, including CLIN/SubCLIN, Local Stock Number (LSN) and quantity (QTY), prior to the start of the delivery order period. For subsequent delivery orders, the contractor may be required to provide delivery data on each Shipyard location to assist each Shipyard in developing more accurate forecasts.

The primary method for placing orders under this contract is via standard delivery order award procedures for the purpose of facilitating efficient order processing. The Government retains the right to place orders other than standard delivery orders (i.e. electronically, in person, orally by phone, facsimile, etc.). All orders shall cite the appropriate CLIN/SubCLIN and unit price as listed in the contract award(s). Designated Contracting Officers may enter into mutual, no-cost cancellations of individual orders under this contract and may reduce the quantity, or authorize a partial shipment of items. Designated Contracting Officers may also increase the quantity of the delivery order during the delivery order period. Any requests for deviation from the terms and conditions of the contract shall be submitted to the Contracting Officer for contractual action.

It is anticipated that the Government will issue a delivery order at least quarterly. Release orders (requests for delivery) by designated Government personnel will “draw-down” from the delivery order. Release orders may occur as often as daily. Personnel authorized to submit release orders to the Contractor will be designated at time of award. The Government will specify the applicable Delivery Order number(s) and Requisition (Document) number(s) with any release of order.

It is the Contractor’s responsibility to be able to read and understand Local Stock Numbers (LSN’s) as supplied by the Government, and cross reference those numbers to standard part numbers, if necessary. Purchasers shall include the following minimum information in procurement documents:

Requisition Number (Document No.)

Contract line and sub-line number (CLIN) Local Stock Number (LSN), if applicable Quantity required (Each (EA), Unit of Issue) Work day hours for delivery purposes Point of contact for delivery Payment Instructions for Wide Area Work Flow, routing table for invoicing, or purchase card information

STORAGE AND DELIVERY REQUIREMENTS

This section outlines the requirements for storage and delivery of marine paint and coatings to support the JIT system.

Warehousing Requirements The Contractor shall warehouse his inventory in such a way that facilitates JIT delivery as described in the Delivery Plan section. The Contractor shall comply with DLAR 4155.37 and FED-STD-793. The Contractor warehouse shall meet the following requirements:

Warehousing Capacity: Adequately store /warehouse forecasted requirements (size of facility); surge capability

Location: Proximity to Government facilities (include physical location(s)) in order to meet the delivery timeline specified in the Delivery Plan

Warehouse Quality: Protect material from environmental temperature extremes and maintain environmental controls as required by the applicable product ASTM F-718 data sheets to ensure product integrity, and as a minimum, store products off of the ground, under cover, with sufficient ventilation to prevent the buildup of flammable vapors, and at temperatures between 40 to 95 degrees Fahrenheit

The Contractor shall, during normal business hours, grant to the Contracting Officer, Shipyard quality assurance inspector or their authorized representative, plant access to the Contractor’s facility in which work under this contract is being performed. The Government personnel must have complied with the visit planning and coordination requirements of FAR 42.402, Visits to Contractors’ Facilities, prior to arranging the visit.

DELIVERY REQUIREMENTS

Delivery of the material under this contract requires the contractor to be able to meet the following requirements:

Material Requirements Planning: Meet demand forecasts through Material Requirements Planning (MRP), inventory and batch management system/plan, including plan for minimizing the number of batches submitted for testing, surge capability; and plan to eliminate/minimize the need for Shelf-life extension

Cycle Time: Normal and expedited turn-around times for delivery as described in the Delivery Plan section; hours and days of operation and delivery service as described in the Customer Support section

Packaging: Packaging, bar coding and labeling capabilities as described in Marking and Documentation Shipping: Transportation resources and capabilities to support deliveries, including the types and number of delivery vehicles that will be used to deliver material, as well as off-loading of material Receipt: Delivery tickets/packing slips to facilitate efficient receipt and payment of shipments

Delivery Plan For standard delivery, the contractor shall deliver product(s) not to exceed (NTE) 72-hours of order notification, excluding weekends and Federal holidays. The Contractor shall deliver all items under this contract during the normal workday of customer site(s). Customer site normal workday hours will be specified in the delivery order.

Items whose delivery falls on a weekend or holiday shall be delivered on the following workday. A “delivery window” may be established for each site after contract award if it is determined to be mutually beneficial to the Government and the Contractor.

The Government may require emergent /expedited delivery of some or all contracted material. Expedited delivery is defined as delivery to destination within 24-hours of order, including weekends and Federal holidays. Expedited delivery in excess of 24-hours is not acceptable. Any additional fee for expedited delivery shall be negotiated between the Government and Contractor on an individual delivery order and case by case basis at the time of the expedite request. Any resultant fee or additional charge for expedited delivery within 24-hours of order shall be executed utilizing the reserved “expedited delivery” CLIN.

The articles to be furnished hereunder shall be delivered all transportation charges paid by the contractor to the delivery points outlined in the Place of Delivery herein or as specified in individual orders issued under the basic contract. The Contractor shall transport and deliver all items furnished under this contract as FOB destination.

Partial deliveries are authorized.

Within twenty-four (24) hours after receipt of an order, the Contractor shall notify the designated Ordering Officer immediately by phone if he/she is unable to fill an order.

Return Policy The Contractor shall provide for a return policy. In the event that the Government issues a release order of an amount in excess of immediate need, the Contractor shall provide a method for the Government to return the product for a refund. Any additional fee or cost associated with the return/restocking of the product(s) must be specified, outlined, and submitted as a part of a vendor’s restocking plan to be negotiated prior to contract award. CLIN 0033 is reserved as the associated return/restocking fee CLIN.

Note: A Contractor shall accept product returns on product item(s), provided the item is undamaged, properly stored and has sufficient shelf life remaining so that it can be reasonably resold to another customer.

Place of Delivery Delivery destinations will be specified in accordance with the individual orders placed under the basic contract. All deliveries will be received at the hazardous material warehouses. The articles to be furnished hereunder shall be delivered, all transportation charges paid by the Contractor, to the following address or as stated in orders issued under the basic contract(s).

If Government assistance is needed, the Contractor will coordinate with material control station personnel all manpower and equipment needed for the purpose of unloading the shipment no later than 24-hours prior to delivery.

The Contractor shall comply with all Hazardous Material transportation regulations covered under CFR 49.

Delivery personnel requesting access to a Shipyard must adhere to the following requirements:

Contractors' representatives must be United States citizens. Representatives are to provide the Shipyard Security Office with proof of U.S. citizenship (i.e. DHS I-9 FORM, "Employee Eligibility Verification Form"). The I-9 is based on presentation of appropriate documentation that both verifies the employee's eligibility for employment and denotes his citizenship status.

NOTE:

(1) The I-9 must be provided before a badge will be issued for unclassified contract work, for access to the shipyard.

(2) If the contract requires access to classified material, a visit request identifying the employee's clearance status may suffice depending on the employee's status within the JPAS database.

(3) In the case of contractor truck drivers, knowing some are owner operators, if they are carrying proof of citizenship they can be issued a badge for access to drop off/pick up material.

(4) If the truck driver does not have sufficient documentation and the sponsor is willing to escort the driver to/from the desired location, a by-escort badge may be issued.

VENDORS/CONTRACTORS SHALL FORWARD ALL VISIT REQUESTS ON THEIR COMPANY

LETTERHEAD SIGNED BY AN AUTHORIZED COMPANY OFFICER.

Vendors/contractors shall provide FULL name, FULL SSN, Date of Birth, Place of Birth and a specific statement attesting that the person(s) for whom they are requesting access are citizens of the United States. By so stating, the vendor/contractor is certifying that they have positive documentation of that person's citizenship on file (i.e. a signed and verified EEVF I-9 form). The request shall also state the specific reason for the visit request and the specific date(s) for which they are requesting access.

Delivery Locations The following are representative delivery locations and instructions, but instructions may vary by…