SPI.pdf
PDF 984 KB Posted
- Attached to
- F-16 Canopy Actuated Release Bolt
- Solicitation number
- FA821326R3021
About this file
This is a Special Packaging Instruction (SPI) document for explosive bolts issued by the U.S. Air Force, 406th Supply Chain Management Squadron at Hill Air Force Base.
The document specifies packaging and marking requirements for explosive bolts (National Stock Number 1377-01-085-5974) to ensure safe handling, storage, and transportation under military preservation standards MIL-STD-2073-1. Two packing levels are defined: Level A provides maximum protection for severe worldwide shipment and deployment conditions, including war reserve materials and open storage scenarios, with dimensions of 10" x 16" x 16 3/4"; Level B offers standard protection with dimensions of 10" x 10 3/8" x 16 3/4". Packaging materials include ASTM D6251 barrier bags, cushioning per A-A-1898 Grade II Class B, tape per ASTM D5486 Type I or V, and wrapping as required. The document mandates proper marking per MIL-STD-129, including the SPI number (F01-085-5974) on container identification sides and UN proper shipping name designation as "Release Devices, Explosive" with Class 1.3 Division 3 classification. Wood packaging material must comply with International Standards for Phytosanitary Measures (ISPM No. 15), requiring heat treatment to 56 degrees Celsius (133 degrees Fahrenheit) for 30 minutes and certification by an accredited agency. Palletization procedures for Level B packs specify configuration on 40" x 48" four-way entry pallets with edge protection and strapping, resulting in a total unit load weight of 403.35 pounds.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CDRLs.pdf | ||
| Item Description.pdf | ||
| ADC SOW.docx | DOCX document | |
| FA821326R3021.pdf | ||
| CADPAD Item Marking Instruction - Ver 1.6.pdf | ||
| EDLs.pdf | ||
| Evaluation Criteria.docx | DOCX document | |
| Subcontractor_List.xlsx | XLSX spreadsheet | |
| Air_Specs.docx | DOCX document | |
| ES7034.pdf | ||
| JFQR.pdf | ||
| REPSHIP.doc | DOC document | |
| SOW Packaging.pdf |
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
CUI
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 3: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 4: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTICE 5: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTES
1. WRAP ITEM AS NEEDED WITH REF.-3 TO PREVENT DAMAGE TO ITEM AND BARRIER BAG REF.-2.
2. PLACE ITEM IN BARRIER BAG REF.-2, REMOVE AIR AND SEAL.
3. MAY PLACE UP TO 10 EACH BAGGED ITEMS IN SHIPPING CONTAINER USING REF.-1 TO PREVENT ITEMS FROM CONTACTING SIDES OF SHIPPING CONTAINER AS WELL AS OTHER ITEMS. USE REF.-1 TO PREVENT MOVEMENT.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
REFER TO MIL-STD 129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .