SPECIFICATIONS_FOR_COMPACT_TRACK_LOADER14 (2).pdf
PDF 29 KB Posted
- Attached to
- 165-20260212140934 BSWC
- Solicitation number
- 3170035060
- Issued by
- Wayne County, Mississippi
About this file
This is a specifications document issued by the Walthall County Board of Supervisors in Mississippi for the procurement of one or more new compact track loaders. The document establishes detailed technical requirements for the equipment while explicitly noting that the specifications are intended to permit competitive bidding and comparable substitutions rather than exclude vendors. The specifications outline a track loader with an engine speed of 2,400 rpm, rated power of 73 horsepower, peak torque of 206 lbf-ft, turbocharged diesel engine with 3.319 liter displacement, Tier 4 Final/Stage V emissions compliance, and a rated operating capacity of 2,579 pounds with a tipping load of 7,368 pounds. The loader features a vertical lift design, two-speed operation capabilities (5.4 mph and 8.5 mph), standard and high-flow hydraulic options (21 gpm and 31.6 gpm respectively), and includes detailed dimensional specifications including a maximum overall height of 156 inches, maximum dump angle of 40 degrees, and a turning radius from the machine center of 66.3 inches.
The specifications also address optional attachments, specifically a six-way dozer blade available in 72-inch, 84-inch, and 96-inch widths with tilt and angle control capabilities, a 22-inch blade height with optional 8-inch extension, and features such as a reinforced steel frame, half-inch replaceable cutting edge, electro-hydraulic angle control, and trip lockout functionality. The document emphasizes that all bids must be equal in performance and quality, with any manufacturer's standard deviations permitted, and that bidders unable to meet specifications should clearly state what alternative items are being offered. No pricing terms, funding amounts, response deadlines, or award dates are specified in this specifications document.
View the file
Other files
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
IF BID IS NOT COMPLIANT, STATE SPECIFICALLY ITEM BEING OFFERED. IT IS THE
INTENTION OF THE WALTHALL COUNTY BOARD OF SUPERVISORS TO SOLICIT
COMPETITIVE BIDS ON COMPARABLE EQUIPMENT SO AS TO NOT EXCLUDE
VENDORS BY NARROWLY DRAWING THESE SPECIFICATIONS.
The following are the suggested approximate specifications for one or more new or unused compact track loaders. All bids must be equal in performance and quality pursuant to the bid specifications below, which are not intended to exclude any manufacturer's standard deviation. Any reference to manufacture's make or series of equipment stated in the following specifications is intended only to establish an acceptable standard and is not intended to limit the bidding and comparable products may be substituted.
TRACK LOADER:
Engine Speed 2,400 rpm Rated Power 73 hp Peak Torque 206 lbf-ft at 1,560 rpm Displacement 3.319 L Aspiration Turbocharged Emissions Tier 4 Final/Stage V Cycle Time (Raise/Lower/Dump) 9s Loader Hydraulic Pressure 3,336 psi Battery Voltage 12V Diesel Tank 26.4 gal Rated Operating Capacity2,579 lbs Tipping Load 7,368 lbs Operating Weight 10,318 lbs Max Breakout Force 5,733 lbf Lift Geometry Vertical Lift One Speed 5.4 mph Two Speed 8.5 mph Rubber Track Size 320 mm, 400 mm each in two patterns Standard Flow 21 gpm High Flow 31.6 gpm Maximum Overall Height 156" Bucket Pin Height at Maximum Lift 120.5" Clearance at Maximum Lift and Dump 92" Ground Clearance 9" Track Length on Ground 57.5" Bumper Overhang Behind Rear Axle 34.8" Maximum Dump Angle 40 degrees Rollback Angle of Bucket on Ground 30 degrees Departure Angle 28 degrees Height to Top of Cab 82.7" Length with Bucket on Ground 142.1" Reach at Maximum Lift and Dump 42" Length Without Bucket 113.6" Turning Radius from Center-Bucket 82.7" Turning Radius from Center-Machine Rear 66.3"
Width with Bucket 72" Width Without Bucket 70"
SIX WAY DOZER BLADE:
Options on 72", 84" and 96" widths 6-Way Control: Tilt up/down 100 degrees; angle left/ right 30 degrees for precise grading & contour work 22" blade height with optional 8" extension for increased capacity 10-gauge rolled steel moldboard Reinforced steel boxed frame design Heavy 1/2" replaceable steel cutting edge Electro-Hydraulic angle control with double hydraulic cylinders Trip lockout function for dirt work Optional trip springs for snow removal Recommended for skid steers over 50 HP Requires Universal Control or OEM wiring harness Universal skid steer mount
File details come from the government source that posted it. Updated .