SPECIFICATIONS_FOR_COMPACT_TRACK_LOADER13.pdf
PDF 29 KB Posted
- Attached to
- 165-20260212140934 BSWC
- Solicitation number
- 3170035060
- Issued by
- Wayne County, Mississippi
About this file
This is a specifications document for compact track loader equipment issued by the Walthall County Board of Supervisors in Mississippi. The county is soliciting competitive bids for the purchase of one or more new or unused compact track loaders with performance specifications designed to allow comparable products from multiple manufacturers. The specifications establish minimum performance and quality standards rather than excluding vendors, and manufacturers' products that meet or exceed these standards are acceptable for bidding. The specifications detail a track loader with a 73 horsepower turbocharged diesel engine, 3.319-liter displacement, operating weight of 10,318 pounds, rated operating capacity of 2,579 pounds, and maximum breakout force of 5,733 pounds force. Additional specifications include transmission options with one-speed (5.4 mph) and two-speed (8.5 mph) configurations, standard and high flow hydraulic systems (21 gpm and 31.6 gpm respectively), and dimensional parameters including maximum overall height of 156 inches and maximum dump angle of 40 degrees.
The specifications also include optional six-way dozer blade attachments available in 72-inch, 84-inch, and 96-inch widths, featuring tilt and angle control capabilities, 10-gauge rolled steel moldboard construction, and replaceable steel cutting edges. The document emphasizes that any reference to specific manufacturers or equipment series is intended only to establish acceptable standards and does not limit bidding to particular vendors. Bidders are required to state specifically any items offered that do not comply with the specifications, and all bids must demonstrate equal performance and quality to the established standards. The county intends to receive competitive bids to ensure fair competition and optimal equipment procurement.
View the file
Other files
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
IF BID IS NOT COMPLIANT, STATE SPECIFICALLY ITEM BEING OFFERED. IT IS THE
INTENTION OF THE WALTHALL COUNTY BOARD OF SUPERVISORS TO SOLICIT
COMPETITIVE BIDS ON COMPARABLE EQUIPMENT SO AS TO NOT EXCLUDE
VENDORS BY NARROWLY DRAWING THESE SPECIFICATIONS.
The following are the suggested approximate specifications for one or more new or unused compact track loaders. All bids must be equal in performance and quality pursuant to the bid specifications below, which are not intended to exclude any manufacturer's standard deviation. Any reference to manufacture's make or series of equipment stated in the following specifications is intended only to establish an acceptable standard and is not intended to limit the bidding and comparable products may be substituted.
TRACK LOADER:
Engine Speed 2,400 rpm Rated Power 73 hp Peak Torque 206 lbf-ft at 1,560 rpm Displacement 3.319 L Aspiration Turbocharged Emissions Tier 4 Final/Stage V Cycle Time (Raise/Lower/Dump) 9s Loader Hydraulic Pressure 3,336 psi Battery Voltage 12V Diesel Tank 26.4 gal Rated Operating Capacity2,579 lbs Tipping Load 7,368 lbs Operating Weight 10,318 lbs Max Breakout Force 5,733 lbf Lift Geometry Vertical Lift One Speed 5.4 mph Two Speed 8.5 mph Rubber Track Size 320 mm, 400 mm each in two patterns Standard Flow 21 gpm High Flow 31.6 gpm Maximum Overall Height 156" Bucket Pin Height at Maximum Lift 120.5" Clearance at Maximum Lift and Dump 92" Ground Clearance 9" Track Length on Ground 57.5" Bumper Overhang Behind Rear Axle 34.8" Maximum Dump Angle 40 degrees Rollback Angle of Bucket on Ground 30 degrees Departure Angle 28 degrees Height to Top of Cab 82.7" Length with Bucket on Ground 142.1" Reach at Maximum Lift and Dump 42" Length Without Bucket 113.6" Turning Radius from Center-Bucket 82.7" Turning Radius from Center-Machine Rear 66.3"
Width with Bucket 72" Width Without Bucket 70"
SIX WAY DOZER BLADE:
Options on 72", 84" and 96" widths 6-Way Control: Tilt up/down 100 degrees; angle left/ right 30 degrees for precise grading & contour work 22" blade height with optional 8" extension for increased capacity 10-gauge rolled steel moldboard Reinforced steel boxed frame design Heavy 1/2" replaceable steel cutting edge Electro-Hydraulic angle control with double hydraulic cylinders Trip lockout function for dirt work Optional trip springs for snow removal Recommended for skid steers over 50 HP Requires Universal Control or OEM wiring harness Universal skid steer mount
File details come from the government source that posted it. Updated .