Specifications-3-31-25.pdf

SPECIFICATIONS ROAD AND

STREET CONSTRUCTION

CONTRACT No. 25-0071

FY 2026 - Pavement Preservation Package 2

In Pinellas County

TO ACCOMPANY PINELLAS COUNTY STANDARD SUPPLEMENTAL SPECIFICATIONS FOR

ROADWAY AND GENERAL CONSTRUCTION (January 2025), PINELLAS COUNTY UTILITIES

DEPARTMENT STANDARD TECHNICAL SPECIFICATIONS FOR UTILITIES AND RELATED

CONSTRUCTION (June 2018), AND FLORIDA DEPARTMENT OF TRANSPORTATION STANDARD

SPECIFICATIONS FOR ROAD AND BRIDGE CONSTRUCTION DIVISION I SECTION 9-2.1.2 ONLY,

DIVISION II, AND DIVISION III (FY 2024- 2025):

SUPPLEMENTAL SPECIFICATIONS

(Amends the Pinellas County Standard Technical Specifications for Roadway and General Construction)

Engineering & Technical Information: Public Works & Utilities - Pinellas County

General Notes to Pay Items Numbers

Letters “A, B, C, D and E” have been added to each pay item number specifying its correlation to the sub PIDs. These letters do not change the specifications associated with the original Pay Item Numbers indicated in Pinellas County Supplemental Specifications for Roadway and General Construction dated January 2025 and this Supplemental Specifications document.

Section 334 of the Pinellas County Roadway Std. Tech. Specs. – Superpave Asphalt Concrete

The specification for Superpave Asphalt Concrete shall be amended to include:

Fuel price adjustments are not applicable in this contract.

PAY ITEM NO. 334-xxxx-xxx – SUPERPAVE ASPHALT CONCRETE

PAY ITEM NO. 334-2095-460 SUPERPAVE ASPHALT CONCRETE, Leveling, Type SP 9.5 or SP 12.5, Fine, Traffic Level C, Variable Thickness https://pinellas.gov/engineering-technical-information-public-works-and-utilities/

• The work shall consist of all labor and material required to construct superpave asphalt concrete for roadways.

• Leveling to be used as directed by the Engineer.

PAY ITEM NO. 334-2095-460 SUPERPAVE ASPHALT CONCRETE, Leveling, Type SP 9.5 or SP 12.5, Fine, Traffic Level C, Variable Thickness the work specified under this Section must be paid for per Ton (TN) as constructed and accepted.

PAY ITEM NO. 334-3125-001 SUPERPAVE ASPHALT CONCRETE, Type SP 12.5, Fine, Traffic Level C, Variable Thickness, Local Groups

• The work shall consist of all labor and material required to construct superpave asphalt concrete for roadway as shown on the plans and listed in the specifications.

Local Groups include:

• Project A - PID 006578A Lansbrook A Resurfacing

• Project B - PID 006294A Local Group 79 Resurfacing

• Project C - PID 006302A Local Group 104 Resurfacing

• Project D - PID 006580A Local Group 137 Resurfacing

• Project E - PID 006232A Local Group 144 Resurfacing

PAY ITEM NO. 334-3125-001 SUPERPAVE ASPHALT CONCRETE, Type SP 12.5, Fine, Traffic Level C, Variable Thickness, Local Groups the work specified under this Section must be paid for per Ton (TN), as shown on Plans, constructed, and accepted.

Section 380 of the Pinellas County Roadway Std. Tech. Specs. – Milling of Existing Asphaltic Concrete Pavements and Roadway Base

PAY ITEM NO. 380-3490 - MILLING EXISTING ASPHALT PAVEMENT - 2" Thickness or Less, Full Width

Shall be used for all type roadways (arterials, collectors, and local roadways) and include intersections, cul-de-sacs, driveways, medians, turn lanes, and any other configurations not mentioned. There will be no extra payment for the conditions noted above.

Milling material may consist of asphalt millings and sub-base. There will be no extra payment for disposal of asphalt millings or sub-base material.

UTILITIES

ITEM NO. PW-331101-309-9001 Adjust Valve Box to Finished Grade (In Pavement)

ITEM NO. RW-333501-310-9001 Adjust Valve Box to Finished Grade (In Pavement)

Description: The work consists of furnishing all labor, equipment, customer coordination, and materials for the vertical adjustment of an existing valve box and cover to match proposed finish grade. The unit price shall include placement of the valve cover to finish grade as shown on plans or directed by the Engineer.

Authorized materials listing can be retrieved from:

Technical Specifications for Utilities and Related Construction Jun 2018 - Pinellas County

Measurement: The measurement for these units shall be Each (EA), measured in place, on grade, inspected, and accepted.

Payment shall be made under:

Item No. PW-331101-309-9001 Adjust Valve Box to Finished Grade (In Pavement)

Item No. RW-333501-310-9001 Adjust Valve Box to Finished Grade (In Pavement)

ITEM NO. SS-333900-302-KXXX Adjust Manhole Rim & Cover

Description: This item provides all labor, equipment and materials for adjusting existing manhole riser, C.I.

frame, and cover. Adjustment includes removal of existing ring and cover and removal or placement of up to 6 courses of brick and reinstalling the existing ring and cover. The work does not include excavation, surface restoration, sheeting or well point dewatering which, if required, will be paid for, or is part of the work, under other Contract Pay Items.

Measurement: The quantities of manhole rim and cover adjustments to be paid under this item shall be Each (EA) measured in place, on grade, inspected, and accepted.

Payment shall be made under:

Item No. SS-333900-302-K001 Adjust Manhole Rim & Cover to Finished Grade (In Pavement)

Item No. SS-333900-302-K002 Adjust Manhole Rim & Cover to

Finished Grade (Outside Pavement)

ITEM NO. UT-999-0000 UNSPECIFIED WORK (Utilities)

Description: All work shall be done in accordance with Section 999-000 of the Pinellas County Standard Technical Specifications for Roadway and General Construction.

Measurement and Payment: The work specified in this section shall be paid for the contract unit price per Each (EA), actually constructed and accepted.

https://pinellas.gov/technical-specifications-for-utilities-and-related-construction-jun-2018/